Display of total tax amount in TDS Cert
Hi
While printing the TDS Certificate (EWT), the total of the tax amounts are not displayed in figures; whereas the same is available in words. How can I solve this issue ?
Regards,
Dear Babu,
i think u r not up load the SAP Note for properly
go the sap site and take the recent Note for E W Tax
Some time it's should be the SAR Files that time better to take the help from your Basis team
when u r appling the SAR files they want to take the Down time for SAR Files up load
at the time of up loading better to set with our BASIS & ABAP team.
first apply the Note in Dev. and Test and do the testing in Test Server after that only u can apply same thing in PRO. Server
Regards
radha
Similar Messages
-
User Exit or BADI to get the Total Tax Amount in a New PO (ME21M)
Hi,
Can somebody tell me any user exit or BADI I can look at to get the total Tax amount of a new PO, after user press SAVE button and before data is written to tables (EKKO, EKPO etc).
Key requirement here is AFTER save button is pressed and before data is written to tables. I want to do some validation before data goes in the table.
Thanks in advance. Please help me.Dear MiniSap..
Maybe you can use function PRICING or CALCUALTE_TAX_ITEM .
Best regards,
Ale -
Total balance amount not displayed correctly
i have shown my table below my problem is that the balance amount being displayed on form displays the total balance amount and total balance amount being displayed is the sum of all balance amount,hence the final total which iget at the end is incorrect and a huge amount,, while balance amount should be equal to expected amount and total balance amount should be total of all balance amount..less any payments made by the client..
i have displayed below only the part of script...
htp.listHeadOpen;
htp.listHeader('Date',null);
htp.listHeader('Min',null);
htp.listHeader('Units',null);
htp.listHeader('Tx Prof',null);
htp.listHeader('Prog',null);
htp.listHeader('Activity Code <img src="/images/cl2_help.gif" ALT="Activity Code Display" height="16" width="16" border="0">',null);
htp.listHeader('Location',null);
htp.listHeader('Payor',null);
htp.listHeader('Auth#',null);
htp.listHeader('Status',null);
htp.listHeader('Billed',null);
htp.listHeader('Billed Amount',null);
htp.listHeader('Expected Amount',null);
htp.listHeader('Balance',null);
htp.listHeadClose;
--billed
begin
select decode(ci.approved, 'Y', 'Yes', 'No') into h_billed
from claim_item ci
where claim_item_id in (select claim_item_id
from claim_item_line cil
where ci.claim_Item_id = cil.claim_item_id
and cil.claim_item_line_id = c_claim_item_line_id);
exception when no_data_found then
h_billed := null;
when too_many_rows then
h_billed := 'Yes';
end;
if c_type in ('C') then
begin
select decode(ci.approved, 'Y', 'Yes', 'No') into h_billed
from claim_item ci
where claim_item_id in (select claim_item_id
from claim_item_activity cia
where ci.claim_Item_id = cia.claim_item_id
and cia.claim_item_activity_id = c_claim_item_line_id);
exception when no_data_found then
h_billed := null;
when too_many_rows then
h_billed := 'Yes';
end;
end if;
--balance amount
if h_claim_Item_id is not null then
begin
select balance_amount into h_bal_amt
from claim_item
where claim_item_id = h_claim_item_id;
exception when no_data_found then
h_bal_amt := 0;
end;
else
h_bal_amt := 0;
end if;
if temp_claim_item_id is null or temp_claim_item_id != h_claim_item_id then
h_total_bal_amt := h_total_bal_amt + nvl(h_bal_amt,0);
end if;
htp.listData('<B>Total reflects the client balance for the services listed. To view the total client balance you must view the Complete Transaction History. The calculation use for the TOTAL amount is, the total amount of the services on THIS screen minus any payments which have been received and have not been applied to services.</B>',11);
htp.listData(nvl(to_char((nvl(h_total_bal_amt,0) - nvl(h_cl_bal,0)),'$999,999.90'),0));This question probably belongs in the Application server forum under the mod_PLSQL heading.
-
Querry to calculate the tax amount
Hi experts,
I want to calculate the total tax amount of all the items in the PO.
But in the table KONV the tax amount is stored according to the line items.
Plz suggest.
Thanks in advanceIf the discount field is formatted as a percentage, you do not need to divide it by 100 as the value entered into the percentage field is a decimal value and then for the display the value is multiplied by 100, but the calculation value is still the decimal number.
var a = this.getField("Weekly Amount").value;
var b = this.getField("Package Discount").value;
var discount = a * b;
event.value = a- discount; -
Tax Amount is not capturing at the time of GRN
Dear friends
i have created a PO with VAT+Sur cahrge tax code
The system is calculating the total taxable privea nd value in PO
While doing GR,System is not capuring at the time of GRN it is only capturing the price without taxes
Can any body help on this?Dear Sanjay
thnks for your replay
But how can I add these values(vat-5% and Surcharge-10% on vat ) in to inventory acount
The accounting document generated at the time of GRN should have the material price +Total Tax amount
Expecting your reply
Thnks again -
Dear All,
I have a very urgent requirement. I want to know which the split of total tax amount into Base tax, Surcharge and Education cess is getting stored. In the basic table BSET, this split is not there Please help me urgently.
Regards
SureshSorry, i forgot to mention that it is for with holding tax.
Regards
Suresh -
Difference in tax amounts between PO (header) and GR documents
Hi,
There is PO where the Fixed value BCD(Fixed value Basic customs Duty) is 10% and education Cess @ 3% and the total tax amount as per PO header data is 400GBP. However, in GR document it is showing as 194GBP.
This difference is not fixed for the other affcted PO and GR. Say, for example in the second such difference: Per PO if the amount is 500 GBP, the GR document shows 481 GBP.
The conditions are defined in MEK1 and they are Z condition types.
I'm working on ECC 6.0
Please suggest
Regards,
SoujanyaThe issue was due to exchange rates. PB00 is maintained in GBP and the customs duty and all other duties condition types local to India are maintained in INR. And there was a difference in the exchange rate amounts between PO and GR. And that was the issue all about
-
How to show Tax Amount bifurcation separately in A/R Invoice PLD
Hi
If total tax amount is 2412. BED is 1599 , Cess is 31 , HSCess is 15 , Vat 765.
I want to show separately Bed , Sum of Cess+HSCess, Vat.
Pls Help
Thanks in AdvanceHi,
You may check this thread first:
Sub: Tax Combinatiom. Tax rate, tax Amount in the print lay out design of t
Thanks,
Gordon -
TDS cerfitcte not splitting tax amount and base amount showing wrong
Dear Friends,
1.I am using 3 different tax code for basic ecess and secess . System caculating correct amount and posting the entries.
but in the certificate its not showing the amount with split . Its showing total amount of TDS.
2. In tds certificate in the column total amount credited its showing 3 times of base amount.
Please suggest me , how to over come with these issues.
JainHi Raj,
SAP recommends a series of tables to be maintained, if you are configuring Witholding Tax.
Please find below the reply from SAP on tables to be maintained.
If you have separate tax codes for Surcharges, J_1IEWT_SURC table
should be maintained, by setting the checkbox checked, for the company
code. Those tax codes should be available the J_1IEWTSURC table
(use SM30 to maintain these values)
2. If you have a combined tax code for surcharges, then the tax rates
should be maintained in J_1IEWT_SURC1 table.
Make sure that tax codes available in J_1IEWT_SURC1 table are not
available in J_1IEWTSURC table and vice-versa.
3. If you are using separate tax codes for Education cess, those tax
codes should be maintained in the J_1IEWTECESS table and 'X' should be
maintained for the company code in J_1IEWT_ECFLAG table.
4. If you are using combined tax codes for Education cess, tax rates
should be maintained in J_1IEWT_ECESS1 table.
Make sure that the tax codes available in J_1IEWT_ECESS1 table are not
maintained in J_1IEWTECESS table and vice-versa.
Maintain these tables and check whether you get the correct figures in your TDS certificate.
Regards,
SAPFICO -
Withholding tax Amount not being displayed in the Invoice while posting a Parked Document
Hi,
I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
I am not sure what is the reason for this. Can anybody help me sort out this Issue.
Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data Tab in the Invoice.
Regards,
Deepak.Dear Praveen,
please check into IMG if You defined the WT type You are using for Your Comapny code:
IMG --> Assign Withholding Tax Types to Company Codes
I hope this helps.
Mauri -
Tax amount not displaying in Condition tab in PO
Hi
I have maintained tax procedure TAXINJ in PO, Tax is input tax 1% CST, Act Key is NVV, cond is JIP1.
But the tax amount is not displaying under the condition tab of the PO in Non-deductible tax (Cond type NAVS).
Plz help me to sort out this issue.
Thanks
Prasant SekharHi,
In Pricing Scheme do you have any automatic Condition Type that "calls" the tax you maintained in TCODE FTXP?
Cheers. -
TDS TAX AMOUNT IS NOT MACHING WITH INVOICE WTAX AMOUNTu2019
Dear All,
I am Facing Following Problem in TDS
While creating an A/P Invoice after putting row level information when user click on u2018ADDu2019 button u201CWithholding Tax Tableu201D opens for deduction of TDS amount. When user selects u201CWithholding Tax Codeu201D in u201CWithholding Tax Tableu201D to deduct TDS amount for an invoice system shows WTax amount as per rate of deduction. But when user click on u2018OKu2019 to u201CWithholding Tax Tableu201D window, WTax Amount will comes as zero on A/P Invoice window.
Then when again user will go to u201CWithholding Tax Tableu201D and manually put the value of WTax Amount system reflects it on A/P Invoice window.
In case when we set approval procedure to A/P Invoice, this invoice goes for an approval. After coming back as approved invoice when originator of invoice going to u2018ADDu2019 the same document system shows an error as u2018TDS TAX AMOUNT IS NOT MACHING WITH INVOICE WTAX AMOUNTu2019
please reply me ASAP
Thanks & Regards,
Swapnilhi
try this
We need to follow the following steps
u2022 Open the BP master for which TDS needs to be deducted go to the accounting tab followed by tax option and then click on the checkbox subject to withholding tax
u2022 Click on the option WTAX codes Allowed and select the TDS Category
u2022 On the previous window click the check box pertaining the checkbox u201CTDS OVERLOOKu201D
Regards,
Manish -
F-48 - Withholding tax amount exceeds total bank line item amounts.
Dear all
In F-48 i am getting following error msg,
Withholding tax amount exceeds total bank line item amounts.
Message no. 7Q320
All Config settings or ok.
Kindly suggest with suitable solution.
With thanks
JaiDear,
Select Relevant to cash flow field for Bank GL you are using for making down payment.
Regards,
Chintan Joshi
Edited by: Chintan Joshi on Jan 21, 2010 10:21 AM -
Withholding tax amount exceeds total bank line item amounts
Dear Sir,
While I am trying to make down payment to the WHT vendor I have found the above error. Can anybody help. I am not giving any base amount in WHT information while down payment. It is picking automatically tax code P9. I am trying to post the down payment 10000/- and P9 tax code amount is 2.266%.
BSRHI,
If the Error is 7Q 320 'Withholding tax amount exceeds total bank line item amounts'
then follow
Kindly check in the relevant bank GL account master whether you have
activated the field "relevant to cash flow" in the create/bank/interest
tab in the GL account master FS02. Also refer the SAP Note 198368.
Reg
Madhu M -
Withholding tax amount display in vendor master data
Hi All,
When i executining the Vendor line item Display (FBL1N), i want to see the Withholding tax amount, withholding tax base amount. I changed the layout for display, i can't able to see withholding tax amount for Doc type RE.
Thanks & Regards
SUNITHA.PHI
try this... define screen layout per activity (Vendors)... there in company code data u have to make wht code details as req entry... path SPRO>IMG>Financial accounting>ARAP>Vendor accounts>Master data>define screen layout per activity (Vendors)
hope this helps u
if it helps u pls give points
Maybe you are looking for
-
Deployment of a crystal report application with visual 2005
Hello all, I am very new at .NET, and this is my first post to this forum. I've created a report (example.rpt) with Crystal Reports 2008. Then I've installed "Crystal Report for visual .net 2005 component". Then I've imported it in a vb.net project
-
Safari quits - I think it's an applet
I'm trying to load an online Bank page: http://www.valleyviewbank.com but the page I think tries to load the scrolling text at the top, some sort of applet, then quits. Both Firefox and Internet Explorer do the same thing. Any ideas?
-
Creating an ES using Java + exposing SAP functionalities as an ES
Hi experts, I am new to SOA and need to learn more about defining new enterprise service. My skill set is basically Java and J2ee concepts including web services. As a webservice programmer, I can understand the interesting concept of SOA. And I want
-
Error message when editing saved form
I am about to return the program for a refund. I am trying to edit a form in this "app" and I get error messages. I created it from scratch.
-
Hi Experts, Can anyone help me finding specific information (idoc types, bapis) for the ALE configuration for MM? Need to use it for materials, vendors, purchasing organizations, etc... Thanks in advance! Kind regards, Neil