Display Program output in PDF format using Webdynpro

Hi all,
I have a requirement which is as follows:
I need to create Webdynpro with ABAP application which should internally call a program.
There will be selection screen for the program but that should not be shown and program should be executed for default values if none of the selection criteria are entered.
Output of the report should be shown in PDF format in a popup.
Please suggest me how to go about this.
Thanks in advance.
Regards
Vasu G

Hello VAsu,
I dont think we can call a program or transaction from webdynpro abap. Instead you can develop a webdynpro screen and internally you do all the process whatever you want to do in a RFC and call it.
Refer this for more clarification:
Re: Web Dynpro ABAP call transaction in the foreground
Regards
Nizamudeen SM

Similar Messages

Displaying a smartform in pdf format using webdynpro

Hi,
I have created a smartform using t.code smartforms. I have created a function module within which i used the function mocule convert_otf which will convert the smartform into binary format. Now how do i proceed in displaying the form using web dynpro.
Plz give me your suggestions.
Thanks in advance.

CALL FUNCTION LV_FUNC_MOD_NAME
    EXPORTING
      CONTROL_PARAMETERS = LS_SSFCTRLOP
      OUTPUT_OPTIONS     = LS_OUTPUT_OPTIONS
      USER_SETTINGS      = ' '
      RRNUM              = IM_RRNUM
    IMPORTING
      JOB_OUTPUT_INFO    = LT_RETURN
    EXCEPTIONS
      FORMATTING_ERROR   = 1
      INTERNAL_ERROR     = 2
      SEND_ERROR         = 3
      USER_CANCELED      = 4
      OTHERS             = 5.
IF SY-SUBRC <> 0.
ENDIF.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
    FORMAT                = 'PDF'
    MAX_LINEWIDTH         = 132
IMPORTING
    BIN_FILESIZE          = LV_LENGTH
    BIN_FILE              = LV_XSTRING
TABLES
    OTF                   = LT_RETURN-OTFDATA
    LINES                 = LT_TLINE
EXCEPTIONS
    ERR_MAX_LINEWIDTH     = 1
    ERR_FORMAT            = 2
    ERR_CONV_NOT_POSSIBLE = 3
    ERR_BAD_OTF           = 4
    OTHERS                = 5.
IF SY-SUBRC <> 0.
ENDIF.
LV_FUNC_MOD_NAME is your smartform function module name.
LV_XSTRING contains the stream of the pdf , send this to the browser using the following code.
    LV_FILENAME = 'RebateRequest.pdf'.
    LV_CTYPE = 'pdf'.
    CL_WD_RUNTIME_SERVICES=>ATTACH_FILE_TO_RESPONSE(
              EXPORTING I_FILENAME = LV_FILENAME
                        I_CONTENT = LV_XSTRING
                        I_MIME_TYPE = LV_CTYPE
                        I_INPLACE = ABAP_TRUE
                        I_IN_NEW_WINDOW = ABAP_TRUE ).
Abhi

Oracle HTMLDB report output in PDF format using FOP

Hi,
We are currently using Oracle HTMLDB1.6.I am trying to implement the HTMLDB report output in PDF format.I got at document but it is not clear.Could you please let use know wheether anybody has already used in their organization.
Appreciate your response.
Regards
Murai

Hey Murai,
did you read the technote:
http://www.oracle.com/technology/pub/notes/technote_htmldb_fop.html
There is anything explained!
greets,
tim

How to email a concurrent program output in PDF format?

I have a XML report running as a concurrent program with PDF output. I need to automate the xml report to be emailed to a specific user as the concurrent manager runs with PDF output. I am using reports 6i and database 10g.
Please help me.

Hi
Use following code in AfterReport trigger
function AfterReport return boolean is
BEGIN
SRW.USER_EXIT(’FND SRWEXIT’);
DECLARE
vinhandle UTL_FILE.file_type;
rfile RAW (32767);
flen NUMBER;
bsize NUMBER;
ex BOOLEAN;
vrec VARCHAR2 (30) := ‘[email protected]’; –receiver’s email id
vsender VARCHAR2 (30) := ’[email protected]’; –sender’s email id
vsubj VARCHAR2 (50) := ’subject’; –subject
vmesg VARCHAR2 (4000);
vmtype VARCHAR2 (30) := ‘text/plain; charset=us-ascii’;
BEGIN
vmesg := ‘Please print and complete attachment’; –message
UTL_FILE.fgetattr (’CTEMP’, –name of the directory
‘o’ || :p_conc_request_id || ‘.out’, –name of the file
ex,
flen,
bsize
vinhandle :=
UTL_FILE.fopen (’CTEMP’, ‘o’ || :p_conc_request_id || ‘.out’,'R’);
UTL_FILE.get_raw (vinhandle, rfile, flen);
UTL_FILE.fclose (vinhandle);
utl_mail.send_attach_raw (sender => vsender
,recipients => vrec
,subject => vsubj
,MESSAGE => vmesg
,attachment => rfile
,att_inline => FALSE
,att_filename => ‘o’|| :p_conc_request_id|| ‘.out’
– CTEMP is a directory with path as $APPLCSF/out or your custom out folder
END;
return (TRUE);
end;
Susheel

Display ALV list output in PDF format

Hi All,
My requirement is :
I am displaying output using Function module 'REUSE_ALV_LIST_DISPLAY'. then i will click one button which placed in application tool bar say 'Download to PDF' when i click this button it will display the output in PDF format. I tried with exsting threads but i unable to get suitable solution.Anybody can send me the sample code please.
Thanks in advance.
Maheedhar

please go throuh the below procedure and sample Code, this might help you.
Procedure
When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
Here is a sample code of program to perform the function.
SAMPLE CODE
*& Report ZAMIT_SMART_FORM_PDF *
REPORT ZAMIT_SMART_FORM_PDF .
data: carr_id type sbook-carrid,
cparam type ssfctrlop,
outop type ssfcompop,
fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
file_size TYPE i,
bin_filesize TYPE i,
FILE_NAME type string,
File_path type string,
FULL_PATH type string.
parameter: p_custid type scustom-id default 1.
select-options: s_carrid for carr_id default 'LH' to 'LH'.
parameter: p_form type tdsfname default 'ZAMIT_SMART_FORM'.
data: customer type scustom,
bookings type ty_bookings,
connections type ty_connections.
start-of-selection.
suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook into table bookings
where customid = p_custid
and carrid in s_carrid
order by primary key.
select * from spfli into table connections
for all entries in bookings
where carrid = bookings-carrid
and connid = bookings-connid
order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting formname = p_form
variant = ' '
direct_call = ' '
importing fm_name = fm_name
exceptions no_form = 1
no_function_module = 2
others = 3.
if sy-subrc 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
calling the generated function module
call function fm_name
exporting
archive_index =
archive_parameters =
control_parameters = cparam
mail_appl_obj =
mail_recipient =
mail_sender =
output_options = outop
user_settings = SPACE
bookings = bookings
customer = customer
connections = connections
importing
document_output_info =
job_output_info = tab_otf_data
job_output_options =
exceptions formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc 0.
error handling
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final] = tab_otf_data-otfdata[.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
IMPORTING
bin_filesize = bin_filesize
BIN_FILE =
TABLES
otf = tab_otf_final
lines = pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = FILE_NAME
path = FILE_PATH
fullpath = FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
************downloading the converted PDF data to your local PC*******
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = FULL_PATH
filetype = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
filelength = file_size
TABLES
data_tab = pdf_tab
FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc 0.
ENDIF.
Check this link it will help you.
https://forums.sdn.sap.com/click.jspa?searchID=5950895&messageID=2375150
Reward points if useful.

Could not display output in PDF format from a RDF file

Hi all,
I'm calling a report file (.RDF) from the browser using RWCGI.EXE, and specified the output in PDF format, but it always asking me to download the active-X for the PDF file generated by the report. I have Adobe Acrobat Reader installed on my machine, what could be the problem?
thanks in advance.

I had the same problem.
As a quick fix, what I enventually did, if you are using WebDB and CGI, is to create an alias in the cgicmd.dat file.
It worked after.
Example of line:
===============
web41pdf: report=web_41.rdf server=Rep60_Z11734 userid=DEMO6I/DEMO6I@PERSOEM destype=cache desformat=PDF tolerance=1440
Then you call the URL http://<web site>/rw60cgi?web41pdf
Yet I would be glad to understand why I also get this message.
Philippe Dalmas.

Report output in PDF format instead of TEXT

Hello every1,
I am using oracle application E-bS version 11.5.10.2 and i want ORACLE reports output in PDF format instead of standard 'text' default format(the place where v register concurrent programs). so can any one tell me what changes should i do to achieve my goal i had change format as pdf in concurrent program and run report but it shows error as follows:
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
Plz. share your knowledge regarding.
Radhi
Edited by: user713 on Jun 20, 2011 9:32 AM

Hi,
check this support note.
Reference
Master Note : Comprehensive REP-3000 Troubleshooting and Overview Guide (Doc ID 200474.1)
Regards, roberto

Help bring a multipage scanned document (TIFF) in PDF format using XML Publ

Help bring a multipage scanned document (TIFF) in PDF format using XML Publisher.
In the generated XML file data into BLOB field is, but their XML Publisher can not handle.
If the output TIFF, multipage PDF file in the report, the report prints a blank.
<fo:instream-foreign-object content-type="image/tiff"> <xsl:value-of select=".//FILE_DATA"/>
If the output JPG file to a PDF report, all displayed perfectly.
<fo:instream-foreign-object content-type="image/jpg" height="9 cm" width="12 cm">
<xsl:value-of select=".//FILE_DATA"/>
Thanks

It seems that these error messages MOD_OC4J_0184 etc are associated with some sort of timeout.
My problem finally solved - see my comments at:
Re: FOP
I would like to see the PDF format using FOP docs made clearer that 2 http servers are involved in this process, one serving htmldb pages and the other oc4j stuff.
Is it possible to do the PDF format using FOP with only the htmldb http server??
Cheers
KIM

How to display the output screen when I use bdc.

hey expert,
I want to display the output screen when i use bdc without using mode 'A'.
thank you.

Hi,
You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
check this sample code....
I had a program if you execute below program it automatically creates a new zprogram.
REPORT zprogram_create_recording.
PARAMETER:
p_prog    TYPE sy-repid OBLIGATORY,
p_shtxt TYPE repti OBLIGATORY,
p_pack TYPE devclass DEFAULT '$tmp'.
DATA:
t_bdcdata LIKE
   STANDARD TABLE
         OF bdcdata.
DATA:
wa_bdcdata LIKE LINE OF t_bdcdata.
REFRESH t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLWBABAP'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-PROGRAMM'.
wa_bdcdata-fval       = p_prog.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'NEW'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSEDTATTR'.
wa_bdcdata-dynpro     = '0200'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-REPTI'.
wa_bdcdata-fval       = p_shtxt.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'TRDIR-SUBC'.
wa_bdcdata-fval       = '1'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'CONT'.
APPEND wa_bdcdata TO t_bdcdata.
IF p_pack EQ '$TMP'.
*local object
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'TEMP'.
APPEND wa_bdcdata TO t_bdcdata.
ELSE.
*package assignment with request
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = p_pack.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'ADD'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0300'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO008-TRKORR'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'KO008-AS4TEXT'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'LOCK'.
APPEND wa_bdcdata TO t_bdcdata.
ENDIF.                                 " IF P_PACK EQ '$TMP'
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
Hope this would help you..
Regards
Narin Nandivada

I have a problem in converting smartform output to pdf format.

Hi,
While converting the smartform output to pdf format.
It is showing this error.
otf end command // missing in otf data.
I have used this function.
Assigning the OTFDATA to OTF Structure table
    CLEAR gt_otf.
    gt_otf[] = gs_otfdata-otfdata[].
Convert the OTF DATA to SAP Script Text lines
    CLEAR gt_pdf_tab.
    CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        format                = 'PDF'
        max_linewidth         = 132
      IMPORTING
        bin_filesize          = gv_bin_filesize
      TABLES
        otf                   = gt_otf
        lines                 = gt_pdf_tab
      EXCEPTIONS
        err_max_linewidth     = 1
        err_format            = 2
        err_conv_not_possible = 3
        OTHERS                = 4.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Please help me in this regard. Thanks in advance.

Hi ,
I am getting this exception "err_conv_not_possible"
CALL FUNCTION f_name " '/1BCDWB/SF00000092'
      EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
        CONTROL_PARAMETERS       = st_control_parameters
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
     OUTPUT_OPTIONS             = st_output_options
USER_SETTINGS              = 'X'
        ZST_TEXTSYMBOLS            = ZST_TEXTSYMBOLS
        wa_kna1                    = wa_kna1
        wa_claim_header            = wa_claim_header
   IMPORTING
     DOCUMENT_OUTPUT_INFO       = st_document_output_info
     JOB_OUTPUT_INFO            = st_job_output_info
     JOB_OUTPUT_OPTIONS         = st_job_output_options
      TABLES
        IT_CLAIM_VERSION           = IT_CLAIM_VERSION
        IT_CLAIM_ITEM              = IT_CLAIM_ITEM
        IT_CLAIM_PARTNER           = IT_CLAIM_PARTNER
        IT_FINAL                   = IT_FINAL
   EXCEPTIONS
     FORMATTING_ERROR           = 1
     INTERNAL_ERROR             = 2
     SEND_ERROR                 = 3
     USER_CANCELED              = 4
     OTHERS                     = 5
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ELSE.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
      EXPORTING
         USE_OTF_MC_CMD               = 'X'
    ARCHIVE_INDEX                =
      IMPORTING
      BIN_FILESIZE   = v_bin_filesize
      TABLES
      OTF = st_job_output_info-OTFDATA[]
      DOCTAB_ARCHIVE = it_docs
      LINES = it_lines
      EXCEPTIONS
      ERR_CONV_NOT_POSSIBLE = 1
      ERR_OTF_MC_NOENDMARKER = 2
      OTHERS = 3.
      IF sy-subrc <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDIF.
HERE when i tried to debug it i got SY-SUBRC = 1.
Please help me in this regard. Thanks in advance.

How to upload a pdf file using webdynpro abap

Hi Experts,
I need to upload pdf files using webdynpro abap.my question is where to upload this files and how to upload this files, and how to display this pdf file.
Please Provide Requried Information.
Waiting for Reply.
Thanks & Regards.
Bhushan.

Hi,
There is a UI element with the type 'File Upload'.
You can use that in your view.
For further details and coding, please refer to
[http://www.****************/Tutorials/WebDynproABAP/Upload/Page1.htm]
Hope this helps you.
Regards,
Dolly

Display Report output in Matrix format

Hi
I want to display normal report output in somewhat this manner.
I will have one change requrest number and many transport requests will be assigned to that change request number, and to the transport requests many objects will be assigned.
I have to display the output in this format:
Change Request 1 |   Tr No.1 | Tr No.2 | Tr No.1 | and so on....
Obj1
Obj2
Obj3
Change Request 1 |   Tr No.1 | Tr No.2 | Tr No.1 | and so on....
Obj1
Obj2
Obj3
Like this it should go on.
I have done the coding part, how to display the data in the above format i am not getting any idea, please help me out if you have any ideas.
Thanks & Regards
Haritha.

Hi Vijay,
First of all thank you for the response.
I am retrieving the data from different tables and putting all the data in one internal table called i_final. Below is the declaration of that internal table and how i have populated the data to that. I am using control break statements to display the data but the data is coming in the next line.
Please see the final internal table:
1. Declaration:
Data:Begin of i_final occurs 0,
       ccsnr like ysts-ccsnr,
       trkorr like ysts-trkorr,
       obj_name like e071-obj_name,
       check_box(1),
       status LIKE YSCS-STATUS,
      End of i_final.
2. Populating different internal tables data to this table:
loop at i_ccno.
    i_final-ccsnr = i_ccno-ccsnr.
    i_final-trkorr = i_ccno-trkorr.
    read table i_status with key trkorr = i_ccno-trkorr.
    if sy-subrc = 0.
      i_final-status = i_status-status.
    endif.
    read table i_obj_name with key trkorr = i_ccno-trkorr.
    if sy-subrc = 0.
      i_final-obj_name = i_obj_name-obj_name.
    endif.
    append i_final.
    clear i_final.
endloop.
3. Using Control break statements to display the data.
sort i_final by ccsnr.
loop at i_final.
     at new ccsnr.
       write:/2 i_final-ccsnr.
     endat.
       write:20 i_final-trkorr.
       uline.
endloop.
But the output is coming like this:
CHG0003785 HSDK933109
                      HSDK933111
                      HSDK933113
                      HSDK933143
                      HSDK933268
But i want the output like this:
CHG0003785 | HSDK933109 | HSDK933111 |   HSDK933113
Thanks & Regards
Haritha.

Convert internal table output to pdf format

Hi all,
my query is given below.
<removed by moderator>
i need to convert internal table output to Pdf. format
the Pdf file generating.
when i am opening the pdf. file shows error like there was an error opening this document . this file cannot be opened because it has no pages.
please help me.
thanks in advance.
Regards,
Karthikeyan Krishan
Moderator message: please post only relevant code parts, your posts must contain less than 5000 characters each to preserve formatting.
Edited by: Thomas Zloch on Mar 30, 2011 12:57 PM

Hi,
Check this link where I send data in RAW format as attachment using cl_bcs.
Open PDF File stored in AL11 and send by email using CL_BCS.
Regards,
Ernesto

To convert Smart Form output to PDF format and send it via email.

Hi Friends,
Could any one please tell me, how to convert the Smart Forms output to PDF format and send it via email to customer. If any one have the code, kindly mail me to [email protected]
Thanks & Regards,
John

Refer the links -
how to convert smartform into pdf and send through mail
Smartform as PDF attachment to a mail.
smartform pdf and mail
smartform to pdf to mail
Regrads,
Amit
Reward all helpful replies.

How to send the output to PDF format in reports 6i?

Hi,
How to send the output to PDF format in reports 6i? I given Mode = BITMAP.
DESTYPE = File, DESFORMAT = PDF, DESNAME = C:\x.pdf.
Report is running fine. But PDF file not generated. I don't know what i missed. Any one can help this?
Thanks
Kavitha

Hello,
Do you get this problem only for DESFORMAT=PDF ?
Test with :
DESFORMAT = RTF, DESNAME = C:\x.rtf
or
DESFORMAT = HTMLCSS, DESNAME = C:\x.html
does it work ?
Check if DESNAME is modified in the reports itself.
Regards

Display Program output in PDF format using Webdynpro

Similar Messages

Maybe you are looking for