Display Step.Result.ReportText direct in the LabView OI after using "Run selected Steps"
I took the (full-featured) LabView OI and modified it to my needs.
Now the problem:
I only have sequences with LabView Action Steps. Those Steps (VIs) all have a Cluster Output "Test Data"
Now i would like to display one element of that Output Cluster (Step.Result.ReportText) direct on the OI after using "run selected steps"
It would be ok, when the Result would display after every step (also in UUT/Single Pass) but most important, after Run Selected Steps.
How can i connect the Output of the step with an element on the LabView OI?
(sorry for my bad english)
RNiklaus wrote:
I took the (full-featured) LabView OI and modified it to my needs.
Now the problem:
I only have sequences with LabView Action Steps. Those Steps (VIs) all have a Cluster Output "Test Data"
Now i would like to display one element of that Output Cluster (Step.Result.ReportText) direct on the OI after using "run selected steps"
It would be ok, when the Result would display after every step (also in UUT/Single Pass) but most important, after Run Selected Steps.
How can i connect the Output of the step with an element on the LabView OI?
(sorry for my bad english)
Is the "Run Selected Steps Using Single Pass" feature not sufficient for your use case? That feature will run the selected steps along with result processing to generate a report for those steps.
-Doug
Similar Messages
-
In LabVIEW OI the Run Selected Step Using Test UUTs does not work
TestStand LabVIEW Operator Interface (old style) - TestStand Version 2.0.1 & 3.0
The Interactive option was enabled for the Process Model Entry Point - Test UUTs in the SequentialModel.seq.
When selective steps were selected to run within the LV OI using the menu item 'Run Selected Step Using - Test UUTs' it was found not to work.
The reason for it not working was because the main event string was "Run Selected Step 0" but this isn't available in the case statement. Changing the "Run Selected Step 1".."Run Selected Step 9999" to "Run Selected Step 0".. didn't produced the desired result. Instead of the selected steps running using the entry point Test UUTs, the steps ran without the process model.
The Case Statement string was retored back to "Run Selected Step 1".
The changes that are required to make the "Run Selected Step 1".."Run Selected Step 9999" work with either of the Entry Points are as follow.
In the VI TestStand - Create Entry Point Menus for Interactive Exec.vi
Insert an Increment from the iteration terminal of the FOR loop. This ensures the Message Queue string generated is in the range 1 - 9999 not 0 - 9999.
In the TestStand - Sequence Display.vi
For the Main Message Event "Run Selected Steps", "Run Selected Step 1".."Run Selected Step 9999"
In the case "1, Default", decrement the input 'Entry Point Index' to the VI TestStand - Start Interactive Entry Point Execution.vi. This ensures the Entry Point Index starts from the value 0.
Now when the selected steps are run using a Pocess Model Entry Point, they run correctly.
This problem only appears to affect the LabVIEW Operator Interface and only the old style. The new style that comes with TestStand 3.0 runs correctly.
There is one other problem. When an Operator is logged in to TestStand, the Entry Point - 'Single Pass' is disabled. But this is not reflected to the menu item 'Run Selected Step Using'. Both 'Test UUTs' and 'Single Pass' are available to the operator.
The reason for this is because in the VI 'TestStand - Create Entry Point Menus for Interactive Exec.vi' the sub menu item is enabled as a result from the property Sequence.AllowInteractiveExecutionOfEntryPoint. This is not enough to disable the 'Single Pass'. The Engine.CurrentUserHasPrivilege needs to be checked as well. Which means modications to the VI 'TestStand - Create Entry Point Menus for Interactive Exec.vi'.
Hope is maybe of help to anyone that may need to use this option.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
In_Labview_OI_-_Run_Selected_Steps_Using_Test_UUTs_doesnt_work.txt 3 KBThanks Ray for the "heads-up". )
I am about to implement a vi which calls TestStand functions. This vi will allow to select tests and permits test re-entry (loops) if the user has supervisor privileges.
I will consider what you recommend in this string.
I will also provide feedback on this thread if I discover anything .... let's say "unusual"..
On another note, I am using TestStand 3.0 I have not observed any problems when running selected steps or run selected steps using single pass. I have also within TestStand set privileges for certain Operators to do the same. They have not reported any problems.
Thanks,
JLV -
Which case in LV Oper. Intf. will do "Run Selected Steps using single pass" for me?
I added a button to simulate "Run Selected Steps", but I really want a button that will "Run Selected Steps Using Single Pass". Which case in the Complex Labview Operator Interface does this for me? What I really want is the report to be generated which happens when I use "Run Selected Steps Using Single Pass" but no report when I select "Run Selected Steps".
Thanks!I figured out how to make this work. Instead of calling the Sequence File View Manager ConnectCommand method using the Run Selected Steps button and the CommandKind_RunSelectedSteps command kind, you use the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind. The tricky part is that before you can use the ConnectCommand method with the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind, you have to create a set of new commands. Do this by first invoking the Application Manager method NewCommands. This method returns an empty set of commands. You must then add a new command to that set. Do this by invoking the InsertKind method on the empty set of commands using CommandKind_RunEntryPointOnSelectedSteps for cmdKind, Sequence File View Manager for managerControl, -1 for insertBefore, and empty strings for currentMenuName and allMenuNames parameters. Once you have made these calls, then you can call the Sequence File View Manager ConnectCommand method using the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind.
The previous instructions work just the same for the Loop On Selected Steps button. Just substitute the CommandKind_RunEntryPointOnSelectedSteps and CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind constants with CommandKind_LoopEntryPointOnSelectedSteps and CommandKind_LoopOnSelectedStepsUsingEntryPoints_Set command kinds (and of course use the Loop On Selected Steps button reference instead of the Run on Selected Steps button reference when invoking the ConnectCommand method).
There is one mystery with this solution that I haven't figured out yet, besides the fact that it is so laborious and non-intuitive to me (but at least it works). Nowhere in any of the calls detailed above did I ever see a parameter to specify which execution entry point to use. I am using the default sequential model entry points Test UUTs and Single Pass. Typically you specify which entry point you want to use (such as when invoking the ConnectCommand method) in the form of an index to a set of entry points where the Test UUTs entry point corresponds to a set index of 0 and Single Pass corresponds to a set index of 1. How did the previous calls determine which entry point to use when I didn't specify anywhere which one to use? Do this just work because you can only run or loop on selected steps using no process model or the Single Pass entry point? -
TestStand 3.1 Run Selected Steps generates Visa error -1073807346?
When using Run Selected Step in TestStand 3.1 to interactively execute previous steps in a sequence a Visa error (-1073807346 The given session or object reference is invalid.) is generated even though the selected step has previously executed with no errors.
Some history:
The sequence in question was developed with TestStand 2.0 and LabView 6.1 and does not exhibit the above mentioned issue. The error began after migration to TestStand 3.1 and LabView 7.1. The sequence executes without errors in all other conditions.Hi,
When your sequence halts, does that mean it's closed the visa sessions and if so when running the selected steps are you running the setup with the open visa sessions or are you just reusing the sessions stored in the Station Globals (I assuming when you said globals you were referring to Station Globals).
Regards
Ray Farmer
Regards
Ray Farmer -
Error -17300 is generated when running selected step
Error -17300 is generated when running selected step (with ot without process model).
Using TestStand 2.0.1f1
See BMP file for error dialog.
I was trying out the example in the Resource Library - TestStand | Process Models | Running Selected Steps via Execution Entry Point -Test UUTs or Single Pass
(link http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E2B756A4E034080020E74861&p_node=DZ52222&p_source=external ). This example is a 1.0.1 example but the web page does say that it should work in 2.0.x
I followed the readme file to use from "Execute" menu:
I have attached the resulant SequentialModel.seq file.
The modifications to the SequentialModel.seq file appears to wo
rk, but when I tried to run 'Run Selected Steps Using' menu item. I got the error message -17300 displayed. (see ErrorScr.bmp attached). The only way to close the execution was to launch Task manager and 'End Task'.
I have attached a small demo sequencefile.
To try example:
Move the SequentialModel.seq to 'C:\TestStand\Components\User\Models\TestStandModels'.
Launch TestStand Sequence Editor and open 'Debug Example1.seq'.
This is how to generate error condition-
1. Run the sequence file from menu Item Execute | Single Pass. You should get a full run with test result, it fails but that doesn't matter.
2. Select Steps 1 and 3 in Main of MainSequence. Run Selected Steps using Single Pass. Again sequence executes correctly.
3. Now run the same selected steps using the new menu item Execute | Selected Test(s). Again the sequence executes again.
4. With Steps 1 and 3 still selected. Run Selected Steps using Single Pass (as in 2 above). This time the error -17300 will be gener
ated.
I also tried running the sequence first doing step 1 (as above), then step 3, then repeating step 1 and this was ok. So the problem appears to be in interactive only.
Any clues as to whats going on and how to resolve it.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq 174 KB
Debug_Example1.seq 19 KB
ErrorScr.bmp 915 KBHi,
TestStand 2.0.1f1
Attached is a SequentialModel.seq that will run selected steps in a new execution using the process model. (It started life based on the inital
demo example)
When either Test UUT's or Single Pass is selected a check is made to determine if there is an initial selection.
If there isn't then the normal Test UUT's or Single Pass sequence is run.
If there is then a new sequence file is created with a new MainSequence. The selected steps are cloned and inserted to the new MainSequence. Also
the Setup and Cleanup groups are also cloned. Likewise the FileGlobal Defaults are copied to the FileGlobals of the new Sequencefile and also the
Locals.
Any Sequences contained in the SequenceFile are cloned to the new sequencefile (except the MainSequence, SequenceFileLoad and SequenceFileUnLoad).
In addition, as the Steps are cloned any break point are also set in the new sequence file.
The new sequence file is executed in a new execution using the process model entry point with the break on first step controlled from the menu
option.
One thing I am assuming is that there is only one element in the RunState.InitialSelection.SelectedSequences array.
Question: Under what circumstances will there be more than one selected sequence?
I had one problem, I tried my SequentialModel.seq with the demo auto.seq. This contains the SequenceFileLoad and SequenceFileUnload.
When I run this demo with a few steps selected, it run ok but when I closed the results window the UnloadFile callback was executed.
I found an option that can be set with the Engine.ReleaseSequenceFileEx which should have stopped the UnloadFile callback from running. But it
made no difference.
I then came across SequenceFile.UnloadCallbackEnabled() and using this function it did disable the Unload callback and this worked.
Question: So, Why didn't setting the Option in the Engine.ReleaseSequenceFileEx work?
Limitation using this SequentialModel.seq,
1) Any precondition to a step's execution based on the result of an early steps are not check when cloning the selected steps. Therefore this has
to be done manually when making the selection.
2) All Sequences in the SequenceFile are cloned to the new sequencfile. (May not be a problem when SequenceFile contains only a few sequences.)
3) The selections are limited to the MainSequence. If steps are selected in a Subsequence then these would be copied to a new MainSequence and
this would be run. Providing this doesn't require any parameters passed from the original caller then this should still run. The problem will
arise if parameters are required.
4) This is not really a limitation - If a full run of the SequenceFile using Test UUT's or Single Pass is required then the user must ensure no
steps are selected.
What I whould like to happen is the ability to make a selection in SubSequence calls either one or two levels down from the MainSequence. The new
execution setup would contain those steps in the MainSequence that are required to call those selected steps in the lower levels.
Would welcome any comments on my SequentialModel.seq attached and answers to my questions.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq 233 KB -
I have updated iOS7 today via iTunes as I was not able to update it directly in the iPhone. After the update I restored the back up and now the iPhone is not getting started. Please advice?
That error message suggest you have a permissions issue. Make sure you have full read/write privileges for the Drive/ Folder location that you are copying the files to.
-
Can I recharge my iPhone 5 directly from a power oulet in Peru where the line voltage is 220V without using a voltage converter?
I would like to have a go at this.
I am presently in Hong Kong. Just prior to this trip, I purchased an iP5. I have taken my iP4S to many countries and charged the phone by either using the USB connection to my laptop or by using Apple's World Travel Adaptor Kit.
Only after getting to HKG did I try to hook up my iP5 to the Apple travel adaptors and of course they do not fot and I do not have an adaptor that goes from 30 pin to the lightning cable.
So is it actually safe to take the original iP5 cable and charger and simply add an international plug adaptor that I am also using with my laptop? If so does that in fact mean that the iP5 can take 220 without converting the voltage that I thought was done by the Apple Travel Adaptor Kit? -
== Issue
==
I have another kind of problem with Firefox
== Description
==
In migrating from an XP PC to a new Win 7 PC, I downloaded Firefox to the new PC and it worked fine - got my Gmail contacts, calendar, etc. Later I used Micros Soft's Windows Easy Transfer to move data, profiles, etc to the new PC. Then could log onto Gmail but it would not show Contacts or Calendar. I then uninstalled Firefox and reinstalled it - nohelp, then I did a system to Restore to before I did the Windows Easy Transfer - no help, then I manually moved my Firefox Profile from the XP machine - no help. BTW at least one other website does not display correctly: http://www.hollandamerica.com/main/Main.action. NOTE - through all this Internet Explorer has shown these sites correctly.
== This happened
==
Every time Firefox opened
== Used Microsoft Windows Easy Transfer
==
== Troubleshooting information
==
Troubleshooting Information
This page contains technical information that might be useful when you're
trying to solve a problem. If you are looking for answers to common questions
about Firefox, check out our support web site.
Copy all to clipboard
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Flashblock 1.5.13 true {3d7eb24f-2740-49df-8937-200b1cc08f8a}
Google Notebook 1.0.0.22 false [email protected]
Microsoft .NET Framework Assistant 1.2.1 true {20a82645-c095-46ed-80e3-08825760534b}
PDF Download 3.0.0.1 false {37E4D8EA-8BDA-4831-8EA1-89053939A250}
Java Console 6.0.20 true
McAfee SiteAdvisor 3.0 true
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar 0
browser.history_expire_days 20
browser.history_expire_days.mirror 20
browser.places.importBookmarksHTML false
browser.places.importDefaults false
browser.places.leftPaneFolderId -1
browser.places.migratePostDataAnnotations false
browser.places.smartBookmarksVersion 2
browser.places.updateRecentTagsUri false
browser.startup.homepage https://mail.google.com/mail/?shva=1#contacts
browser.startup.homepage_override.mstone rv:1.9.2.3
browser.tabs.loadInBackground false
dom.disable_window_move_resize true
dom.event.contextmenu.enabled false
extensions.lastAppVersion 3.6.3
general.useragent.extra.microsoftdotnet ( .NET CLR 3.5.30729)
network.cookie.lifetimePolicy 1
network.cookie.prefsMigrated true
network.image.imageBehavior 0
places.last_vacuum 1273287748
print.print_printer HP Photosmart C7100 series
print.printer_HP_OfficeJet_Pro_1170Cse.print_bgcolor false
print.printer_HP_OfficeJet_Pro_1170Cse.print_bgimages false
print.printer_HP_OfficeJet_Pro_1170Cse.print_command
print.printer_HP_OfficeJet_Pro_1170Cse.print_downloadfonts false
print.printer_HP_OfficeJet_Pro_1170Cse.print_evenpages true
print.printer_HP_OfficeJet_Pro_1170Cse.print_footercenter
print.printer_HP_OfficeJet_Pro_1170Cse.print_footerleft &PT
print.printer_HP_OfficeJet_Pro_1170Cse.print_footerright &D
print.printer_HP_OfficeJet_Pro_1170Cse.print_headercenter
print.printer_HP_OfficeJet_Pro_1170Cse.print_headerleft &T
print.printer_HP_OfficeJet_Pro_1170Cse.print_headerright &U
print.printer_HP_OfficeJet_Pro_1170Cse.print_in_color true
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_bottom 0.3
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_left 0.5
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_right 0.3
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_top 0.3
print.printer_HP_OfficeJet_Pro_1170Cse.print_oddpages true
print.printer_HP_OfficeJet_Pro_1170Cse.print_orientation 0
print.printer_HP_OfficeJet_Pro_1170Cse.print_pagedelay 500
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_data 1
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_height 11.00
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_size 1634485807
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_size_type 0
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_size_unit 0
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_width 8.50
print.printer_HP_OfficeJet_Pro_1170Cse.print_printer HP OfficeJet Pro 1170Cse
print.printer_HP_OfficeJet_Pro_1170Cse.print_reversed false
print.printer_HP_OfficeJet_Pro_1170Cse.print_scaling 1.00
print.printer_HP_OfficeJet_Pro_1170Cse.print_shrink_to_fit true
print.printer_HP_OfficeJet_Pro_1170Cse.print_to_file false
print.printer_HP_Photosmart_C7100_series.print_bgcolor false
print.printer_HP_Photosmart_C7100_series.print_bgimages false
print.printer_HP_Photosmart_C7100_series.print_command
print.printer_HP_Photosmart_C7100_series.print_downloadfonts false
print.printer_HP_Photosmart_C7100_series.print_edge_bottom 0
print.printer_HP_Photosmart_C7100_series.print_edge_left 0
print.printer_HP_Photosmart_C7100_series.print_edge_right 0
print.printer_HP_Photosmart_C7100_series.print_edge_top 0
print.printer_HP_Photosmart_C7100_series.print_evenpages true
print.printer_HP_Photosmart_C7100_series.print_footercenter
print.printer_HP_Photosmart_C7100_series.print_footerleft &PT
print.printer_HP_Photosmart_C7100_series.print_footerright &D
print.printer_HP_Photosmart_C7100_series.print_headercenter
print.printer_HP_Photosmart_C7100_series.print_headerleft &T
print.printer_HP_Photosmart_C7100_series.print_headerright &U
print.printer_HP_Photosmart_C7100_series.print_in_color true
print.printer_HP_Photosmart_C7100_series.print_margin_bottom 0.300000011920929
print.printer_HP_Photosmart_C7100_series.print_margin_left 0.5
print.printer_HP_Photosmart_C7100_series.print_margin_right 0.300000011920929
print.printer_HP_Photosmart_C7100_series.print_margin_top 0.300000011920929
print.printer_HP_Photosmart_C7100_series.print_oddpages true
print.printer_HP_Photosmart_C7100_series.print_orientation 0
print.printer_HP_Photosmart_C7100_series.print_pagedelay 500
print.printer_HP_Photosmart_C7100_series.print_paper_data 1
print.printer_HP_Photosmart_C7100_series.print_paper_height 11.00
print.printer_HP_Photosmart_C7100_series.print_paper_size 1634485807
print.printer_HP_Photosmart_C7100_series.print_paper_size_type 0
print.printer_HP_Photosmart_C7100_series.print_paper_size_unit 0
print.printer_HP_Photosmart_C7100_series.print_paper_width 8.50
print.printer_HP_Photosmart_C7100_series.print_reversed false
print.printer_HP_Photosmart_C7100_series.print_scaling 0.80
print.printer_HP_Photosmart_C7100_series.print_shrink_to_fit false
print.printer_HP_Photosmart_C7100_series.print_to_file false
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_bottom 0
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_left 0
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_right 0
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_top 0
print.printer_hp_psc_1200_series.print_bgcolor false
print.printer_hp_psc_1200_series.print_bgimages false
print.printer_hp_psc_1200_series.print_command
print.printer_hp_psc_1200_series.print_downloadfonts false
print.printer_hp_psc_1200_series.print_evenpages true
print.printer_hp_psc_1200_series.print_footercenter
print.printer_hp_psc_1200_series.print_footerleft &PT
print.printer_hp_psc_1200_series.print_footerright &D
print.printer_hp_psc_1200_series.print_headercenter
print.printer_hp_psc_1200_series.print_headerleft &T
print.printer_hp_psc_1200_series.print_headerright &U
print.printer_hp_psc_1200_series.print_in_color true
print.printer_hp_psc_1200_series.print_margin_bottom 0.3
print.printer_hp_psc_1200_series.print_margin_left 0.5
print.printer_hp_psc_1200_series.print_margin_right 0.3
print.printer_hp_psc_1200_series.print_margin_top 0.3
print.printer_hp_psc_1200_series.print_oddpages true
print.printer_hp_psc_1200_series.print_orientation 0
print.printer_hp_psc_1200_series.print_pagedelay 500
print.printer_hp_psc_1200_series.print_paper_data 1
print.printer_hp_psc_1200_series.print_paper_height 11.00
print.printer_hp_psc_1200_series.print_paper_size 1634485807
print.printer_hp_psc_1200_series.print_paper_size_type 0
print.printer_hp_psc_1200_series.print_paper_size_unit 0
print.printer_hp_psc_1200_series.print_paper_width 8.50
print.printer_hp_psc_1200_series.print_reversed false
print.printer_hp_psc_1200_series.print_scaling 1.00
print.printer_hp_psc_1200_series.print_shrink_to_fit true
print.printer_hp_psc_1200_series.print_to_file false
privacy.clearOnShutdown.cookies false
privacy.clearOnShutdown.downloads false
privacy.clearOnShutdown.formdata false
privacy.clearOnShutdown.history false
privacy.clearOnShutdown.passwords true
privacy.cpd.cookies false
privacy.cpd.downloads false
privacy.cpd.formdata false
privacy.cpd.history false
privacy.item.downloads false
privacy.item.formdata false
privacy.item.history false
privacy.item.passwords true
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.promptOnSanitize false
privacy.sanitize.sanitizeOnShutdown true
security.warn_viewing_mixed false
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729)
== Plugins installed
==
*-Default Plug-in
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*Shockwave Flash 10.0 r45
*McAfee Virtual Technician plugin for Mozilla (Gecko Version: 1.8b1)
*3.0.50106.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Adobe PDF Plug-In For Firefox and NetscapeOops - for some reason, this problem now seems to have gone away. May have had something to do with Flash. I'll keep my fingers crossed.
-
I ha
If you have a non-Apple "main" router, then "join" would have been the only way it could connect.
Unfortunately, the Time Capsule does not provide any routing functions in this type of setup, so the Ethernet ports are not enabled in this setting.
If you have an Apple "main" router, it may be possible to enable the Ethernet ports in another type of setting. Then you could connect the old Mac to one of the Ethernet ports on the Time Capsule for Internet access. -
Report directly to the printer
Hi
i'm trying to run a report directly to the printer. Report is running but scaling is not happening. Following is the URL which i'm using to run the report. This will run not an issue if i try to increase or decrease the scaling, (start-->controlpanel-->printer-->printing preference-->advanced tab-->scaling)
this will not work.
http://<hostname>/reports/rwservlet?report=test.rdf&destype=printer&desformat=pdf&server=<servername>
thanks in advanceCheck out the orarrp utility (Oracle Reports Remote Printing Utility) on Metalink, note 277431.1.
It may be easier in the end to set up printers on the OAS. I guess that client PC's are using network printers, or are the really using printers connected directly to the PC? -
Reading the output values after each step executes in LabVIEW User Interface
Hello all,
Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1
Problem: is there a way to execute the subsequent steps programatically and get the output values from each of them?
I have already extended a little bit a Full OI interface for TestStand to load up any sequence, choose some of the steps and run them step by step (something like option to Run Selected steps). What I am trying to do is to add some actions between each step and do that in User Interface (I can't modify the sequence!), so I am starting the NewExecution with some previously configured InteractiveArgsParam and set an option breakAtFirstStep to True. Afterwards I am just doing something like Step Over when debugging the sequence and this works good, but I didn't fine a way yet to read the output values from the steps...
Then, if I wait until the execution finishes I can read my Results by processing the ResultObject, but this works only after finalizing of the test sequence. Since I wanted to stop after each step, read the values, do some actions and continue to the next step I tried to register an event callback for Trace of Execution View Manager. I can see that after each executed step this event is triggered, but when I try to read a ResultObject returned in Event Data it is not filled with values (ResultList seems to be empty?). Is it a proper behaviour or maybe I am doing the readout in wrong way? (It is the same VI as for reading ResultObjects after sequence finishes and there it works fine for arrays, containers and other data types).
Like I mentioned I can't modify the Test sequences, I can't add a UImessages.
What are my options? Should the trace event returns all output values from each steps or is it just used for status checking? Or maybe there is completely different approach to that matter?
Thanks in advance for any suggestions,
Best Regards.
CLA, CTD, CLED @ Test & Measurements Solutions Poland
Solved!
Go to Solution.Thanks for your replay, I have tried to build it in my LabView Block Diagramm, es seems like this image.
But the variable GetNumSubProperties ist always 0. Why?
PS: I need only the variable "Step.Result.PassFail" from the last step, do you know, how can I get it? I think, it is maybe easier than read all the "Result".
Attachments:
ReadStepResultInLabview.JPG 39 KB -
Displaying the contents of internal table- in email Step of workflows
Hello Folks,
I wanted to display the contents of an internal table ( would contain a list of opportunites ), in an email sent throught the workflow:
My idea was to LOOP AT <ITAB> into <WA> from an external program and then call the workflow for each content of the <WA>. This will be a problem as, if there are like 1000 records in the internal table, then workflows will be called 1000 times...sending 1000 emails..
My requirement is that we need to send a single email to the single person, displaying the content of the internal table in the email body......
My question
1) Is this scenario possible through worflows ?
2) If not, please provide an alternative ..
Thanks
AnandDo you mean to say that just by inserting the multiline element
within the body of the 'Send email' step type, the contents
of the multiline element is displayed automatically without
we having to loop at it somehow ?
Follow the below apporach,
1. First create a multiline container element in the workflow conatiner.
2. Populate the internla table , by using the bor methods and pass back the populated ITAB to the WF by using the binding concept.
3. Now create a mail step in the workflow, you have the option of inserting the workflow container elements into the mail conten, so insert the multiline container element , then it prompts to select the option like a) Do you liek to display only first line b) Display the ITAB line by line c) Display ITAB lines continuously with out line break.
4. based upon the requirement select any one of the options.
Note: Make sure the line length of the ITAB won't excced 132 charecters, because the send mail step will consider only 132 characters. -
It all started with a blank screen on a frozen iPhone. Doing the sleep and home button reset seemd to solve the problem, but then the apple logo started to show in the middle of calls, and finally, mail, camera, facebook and pulse apps failed to start, returning to the home screen after a few seconds. So it looked like a restore with ITunes was the solution. I was able to back up the iPhone. The restore process sems to start fine, but the process cycles forever, at step 3 of 4, display "Restarting Sync" and goes again. It seems it can´t pass from step 3.
I have tried doing the restore from recovery mode with the same result. IOS is 6 and ITunes is 10.7.
An interesting thing, is that as I kiled the restore process and disconnected the iPhone from the USB cable connected at the Mac Book and then used the phone as "Normal" it seemed that all the data and settings where restored, but not the apps; camera and mail keep failing to start, but the interesting thing is that the battery drains very quickly, in a matter of 4 hours.
Any suggestions or ideas will be very welcomed.Try Recovery Mode:
1. Start iTunes.
2. Plug phone into a USB port on the computer, not an external hub or keyboard port.
3. Press both home and sleep/wake buttons until the Apple logo reappears, then continue pressing the home button alone until iTunes detects the phone in Recovery Mode.
4. Follow the prompts to restore.
If recovery mode doesn't work, you likely have a hardware problem that needs service/replacement -
I downloaded a trial version of Final Cut Pro X directly from the Apple website but when i try to open the file, a message is displayed saying 'legacy file should be converted' what can I do to fix it?
Where did you download it from exactly? URL.
Exactly what computer is this. -
My bookmarks, on a HP Pavilion dv-7-2273cl notebook, are saved yet the page icon is still displayed after using the bookmark instead of the actual icon for the website. I have followed the directions for "Favicons do not display" without any success. This problem is not experienced on my much older Gateway desktop.
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file
Maybe you are looking for
-
Alright, I've had this problem for a while now, and I'm at my wit's end. Hope someone can help me. First of all, I'm running Windows 8.0 on a Lenovo, using iTunes 11.1.5, and an iPhone on iOS 7.0.6. Problem is, when I plug my iPhone 5 into my compute
-
Error When Transporting the DTP's
HI All, I was facing the problem with Transporting the DTP's to Quality. Transport log error : Program Terminated (job : RDDEXEC,no.: 09463801). (Program RDDEXECL'Which was started in the background,was terminated abnormally.) W
-
How to create Schema Header and footer with Pipe delimiter file..?
Hi all, I have issue with creating Schema Header and footer with body file ..The file format is Pipe delimiter.. The follwing file below like is... Adapters:File Adapter(Read)-11g. 1|000|2025|SDFG|54787 1|2055|244|9566|000|000|044|2577|361147|45554|w
-
Using a Bluetooth phone as a dial up modem.
Hi, When setting up my phone with my MacBook I'm given two options: Connect to the internet using GPRS, or use it as a phone to dial in to a provider. In Canada data access is very expensive, but would using my phone as a dial-up modem count on my bi
-
How to analyze this waveform to find out the point
The current waveform as the following attachment ,How can I analyze it to find out the point a in order to calculate the different current rms between it? Attachments: æªå½å.JPG 44 KB