Display the status of the production order

Hi Friends,
I have a task which should display the status of the production order.
If an order number(AUFNR) is given, it should display whether the order is available or not. Also it should display the status of the order whether it is delivered, completed, blocked etc.
Can anyone send me the code for the above task.
Waiting for ur reply.
Raj
Message was edited by: Craig Cmehil

Please mark this post as "Solved on my own" as it is a duplicate of your post which has already been answered. Thanks.
Also, please remove the email address from the subject line.
Regards,
Rich Heilman

Similar Messages

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

A FM or BAPI to update the status of a Production Order

Hello, does anybody know if there is an interface FM or BAPI to update the status of a production order. Specifically I want change the status of PP order to LKD (locked). I want to do it programmatically from an external system.
Thank you
Ernesto

Hi,
I believe you can use the FM I_CHANGE_STATUS to update the status..
where JEST-OBJNR = AUFK-OBJNR
Thanks,
Naren

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

How to make the status of a sales order complete of which PART DELIVERY

How to make the status of a sales order complete of which PARTIAL DELIVERY has already done. <b>(Assigning rejection status not accepted)</b>

Hi Gyana
There is no document with me. But I can confidently say that because I am using this functionality.
In my case I have created a Order Reason as "Short Closed". once you short close this order only the balance quantity gets rejected (provided you have already made previous delivery and PGI).
Try it in one of your test clients if you have. Once it is short Closed it wont also show in the orders due for processing in Production.
Also you can generate reports based on this if your customer wants to know how many order he has short closed, qty of item short closed etc.
Try it.
Rgds
Sunil

So where we see the status of this work order request

Hi All,
I have submitted work order WO00034931 in SAP for a new vendor address but it seems my approver (Andre Vabre) never received it. In SAP, its status is Submitted for Approval.
So where we see the status of this work order request
Thanks,
Kumar

Hi
You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
variant conditions to define surcharges and discounts for a variant
Variant u2013Pricing steps
Create condition record
create a procedure where you enter the reference from the characteristic
Assign the procedures to either the characteristic values
configure the material in the sales order
The net price for the material is displayed
If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
In addition, the Conditions pushbutton is displayed.
On pressing this pushbutton,
One can see which conditions have
influenced the price.
I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
Thanks

Can we reverse the status of the planned/prod order with ATP check

Dear all,
i ahve 1 query. When in the product view, if u select any planned order/prod order, and click on ATP check.
if the quantity is confiremd, then the stutus of the orde change to checked and confirmed.
i want to know can we change this status. can we reverse this status.??
let me know ASAP. if yes plz explain in deatils
Regards
Pravin Mukkawar

hi Praveen
You can reverse/change the status of a Planned Order if it shows "checked and fully confirmed/partially confirmed" in
/sapapo/rrp4( process receipts).
To do this, enter your location product and run the transaction. be sure you are in change mode.you will get a list of planned orders.select your planned order and select the "pegging structue conversion" push button. then in the next screen select the valid line and push the "delete ATP status" button.
refresh product view and you can see the new status "Not Checked" for your product.
Hope this helps you.
Regards
Mohan V R Chunchu

How to monitor the status change of pp order?

I want to monitor all of the status change of PP order ,when the status change to DLV, system trigger a idoc to legacy system.
I added some code in EXIT_SAPLCOBT_001, but I found this user exit only working in CO02, when I use MIGO or MB1C ... tcode to do some GR, the source code is not woking, that means I have to add the code to any entrance of status change????? anybody have some good idea? maybe I have to add a monitor to monitor the table jest ????

Could you elaborate your requirement please?
Anyways, the BP transaction display/change mode can be controlled through settings. Goto BP->Extras->Settings->Choose Display/Change/Setting last selected. May be in your system, the setting is 'Setting last selected'. That's why it's showing the last status display/change. If you want it to be display only, you can change the setting to display. But, the settings are user specific and any changes made will reflect for the specific user.

All default routing value has to be changed, while changed the work center in production order

Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy R

Hi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R

Limit the number of open production order

Dear PP experts,
I am working on discrete scenario where client want to limit the number of open production order per work center. The more elaboration is like, for one work center the only specific number of production should remain open (e.g. 5 production order in assembly shop) when user is trying to open 6th production order system should restrict that.
Does any standard functionality available in system or needs development?
Regards,
Shekhar

Dear,
You can do it with avilability check for materail and capacity.
In OPJK do the for your production order type as no release if materail and capacity i missing.
Hope clear to you.
Regards,
R.Brahmankar

How to add the long text in Production order through FM

Hi,
Iam having custom program which has BAPI (BAPI_PRODORD_CREATE) inside it and this program is used to create Production orders with the details of Sales order Number,Line item,Plant,Order type,Quantity and Start date. This program is scheduled in Background.
Now client wants to add the Long text (seperate TAB in production order and they want to update the VC details of Sales order in the Long text area).
One option is after creation of Production order, through BDC(calling CO02 and update the long text) we can update the long text and client doesn't want this option.
Another option is after creation of Production order, using Function module SAVE_TEXT, Update the Long text in Production Order and this is not working in Production order (already my ABAP consultant checked it ).
If any one of you came across this requirement, pl share with me how you addressed it.
Regards
A.Sureshbabu

Hi,
The method is quite simple, i presume you're quite well versed with doing recording, so the key thing to keep in mind is how to prepare the input file.
At my end i had about 5 lines of data which needed to be uploaded, hence i had a tab-delimited file with the order nos. in the first column & the five lines of text in five different columns (Refer format below)
Order No.
Line - 1
Line - 2
Line - 3
Line - 4
Line - 5
12345
txt - 1
txt - 2
txt - 3
txt - 4
txt - 5
67890
txt - a
txt - b
txt - c
txt - d
txt - e
Now provide this input file for your lsmw or bdc program & it will work. You can work with your abaper if you're not so comfortable with LSMW or BDC programming he / she should be able to easily make it work for you.
Regards,
Vivek

Changing the status of the sales order item based on reason for rejection

Hi All,
When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
Regards,
S.Subasree

Hi subburamaiah
If you want the report you can create a separate SIS report . In that take the input field as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
Regards
Srinath

ALV Report to display the status of the requests raised through ESS

Hi All,
We have to develop a ALV report to display the status of the requests raised through ESS
for Leave, Travel & Event Management, Travel and Appraisal workflows.
ESS Travel, ESS TEM, ESS Apraisal workflows are associted with SAP Business Objects.
we are using the function module SWI_WORKITEMS_OF_OBJTYPE_GET to get
the top level work item id's by passing the object type like PDRELA_025, BUS2089.
By using SWP_WORKFLOW_LOG_READ function we are getting the workflow log
by passing top level work item id's as imort parameter.
The report output should have the following fields
Initiator, Initiator Personal No, Request Type( Leave, Travel etc.. )
Date of application of the request, Status ( Approved by RM, Rejected etc )
Name of the Approver, Approved / Rejected Date.
The logic should be work for all the above ESS workflows and should be generalized.
Can any one please let me know the procedure to get the required information from the workflow log.
It would be great if any one suggest on the same how to proceed further to get the information as mentioned above.
Thanks & Regards,
Jagadeeswara Rao Balla.

Hello,
You can get most of that information from fm SAP_WAPI_GET_HEADER, input is workitem_id.
regards
Rick Bakker
Hanabi Technology

Does anyone know the status of the new CMYK monitor display Apple is developing?

Does anyone know the status of the new CMYK monitor display Apple is developing?

I have the same iMac as you but with a 1 TB hard drive.
Apple replaced the 1 TB hard drive of iMacs manufactured between October 2009 and July 2011 because of problems. When I took my iMac, the Genius gave me the bill (even if the repair was free) and the 1 TB hard drive cost about $100. This was with a 1 TB Seagate hard drive, so the cost for a 500 GB hard drive may be smaller, depending on the brand

Display Approval Status on the page

I have a pages library, where i have content approval turned on. I want to display the OOTB Approval Status( Internal name: ModeratorStatus) column in the pagelayout in read only mode. Any ideas??

Hi,
According to your post, my understanding is that you want to display Approval Status on the page in read only mode.
You can insert the JQury code to a Content Editor Web Part:
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.10.1/jquery.min.js"></script>
<script type="text/javascript">
$(function(){
setTimeout(Test,500);
function Test(){
var obj1=$("div[name='_ModerationStatus']");
obj1.removeAttr("SortFields");
</script>
Then you cannot click Approval Status to sort items and the HTML of the Approval Status becomes as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Display the status of the production order

Similar Messages

Maybe you are looking for