Distribution of fields from screen into different tabs in tabstrip.

Hi All,
I am having a screen 400 in program 'SAPLMR1M' which is the main program for MIRO transaction.
The screen is having some 15 fields into it.
When I run the MIRO transaction, I can see some of those fields appearing in the different tabs.
My question is if a screen has 10 fields. Can I get the fields from one single screen distributed in different tabs in a tabstrip.
Eg. 2 fields in tab1.
4 fields in tab2.
4 fields in tab3.
Thanks in advance.
Regards,
Gaurav.

Hi,
Yes. It is possible.
If you consider any transaction then it contains various tables for updation.
Suppose if a screen contains 10 fields . Then 2 situations arises:
1) If all that 10 fields belong to the same table then we can get directly based on the key value into any number of tab strips.
2) Incase if we have field from more than 1 table then we have to create separate internal tables for each tabstrip and based on primary key we have to fetch the data using JOINS or FOR ALL ENTRIES and you can display in the tabstrips or table controls.
Reward points if helpful;.
Thanks and regards.

Similar Messages

How to delete invisible fields from screen painter SE51?

Dear all,
How to delete/remove invisible fields from screen painter SE51?
Thanks.

HI,
just go to screen painter-->layout in change mode.
the invisible fields will be looking faded
click on that and press the DEL button.
that will be deleted.
<REMOVED BY MODERATOR>
vivekanand
Message was edited by:
Alvaro Tejada Galindo

Extract a field from screen

i went to know please how can i extract a content of field from screen and display it in my specific program? My specific program is for displaying a form and the field (DKOBR-EMPGE) is in pool functions(SAPLKOBS)
Thanks a lot,

hi,
declare a variable field in the program with the same name as that of the screen field name.
In the PAI module u can use the variable so that it will display the content of the screen field.

How to add a search help on a screen field from screen painter

Hi,
I would like to add an existing Search Help on a screen field in Screen painter.
Of course it's possible to just click on th screen field and in the property box, I just have to set the name of teh search help.
The problem is that I need the screen field to be grey and user musn't be able to change the field value if he doens't use the search help.
I'm not allowed to modify the existing search help or to built it on my own from source code, I must use the existing one.
Do you have an idea on how to do so?
Regards,
Morgan

Dropdown Box:
In the screen painter for that field goto properties -> Dropdown ->select listbox.
Option 1:
Instead let that field be in change mode and if user enters any wrong entry which is not there in the table give a error messgae.
CHAIN.
 FIELD addr1_data-country.
 MODULE modify_screenfields1.
ENDCHAIN.
MODULE modify_screenfields1 INPUT.
CASE sy-ucomm.
 WHEN 'ENTER' OR 'EXECUTE'.
 IF NOT addr1_data-country IS INITIAL.
 SELECT SINGLE landx FROM t005t INTO lws_landx WHERE
 land1 = addr1_data-country
 AND spras = 'EN'.
 IF sy-subrc <> 0.
 MESSAGE e000(zo_spa) WITH text-022. " Invalid Country code
 ELSE.
 t005t-landx = lws_landx.
 ENDIF.
 ELSE.
 CLEAR: t005t-landx.
 ENDIF.
 ENDCASE.
ENDMODULE. " modify_screenfields1 INPUT
Option 2: Other than if u want the way u like, let that field be greyed out. don't attach the search help.
In the PROCESS ON VALUE-REQUEST.
FIELD addr1_data-region MODULE region_pov.
MODULE region_pov INPUT.
Using the F4IF_INT_TABLE_VALUE_REQUEST table value request show the search help.
also make that field input enabled.
ENDMODULE. " region_pov INPUT
I think this will solve ur problem.
Regards,
Prakash.
Message was edited by: Prakash Ramu

To fetch selective fields from DATABASETABLE into Internal TABLE

Hi Friends,
I have declared an internal table with fields for e.g. A , B , C , D.
This does not have any records as of now.
I have to fetch data from a DATABASE TABLE with fields A , B , X , Y , Z having records .
I only need records for fields A B fron DB table.Can any one pls tell how can I do that with performance issues in mind as lots of records are there.
I had written a query where:
SELECT A B from dbtab
into CORRESPONDING FIELDS of table it_table.
It_table i had defined with only two fields A B.
Is this correct?
Please tell wats the way to do it as I am new to ABAP.
THANKS in ADVANCE..

Hi.....
What mentioned in all above answers is very helpful for ur requirement...
and...
Here some Steps to increase the performence of your programs...
>Use Select Single when only one row is expected
>Use Select Where rather than Selectu2026Check
>Use Select with aggregate functions (SUM, MAX, MINu2026)
>Use a View instead of nested Selects
>Use Select column specific instead of select * for few fields
>Use Selectu2026Into Table rather than Select...Move Corru2026Apend
>Use Join extension with Select if possible
>Use special operators (CO, CA, CS) rather than code your own
>Use Delete Adjacent Duplicates rather than manual processing
>Specify key fields for Readu2026Binary Search
>Use Loop At Where rather than Loop Atu2026Check
>Copy Internal Tables with TAB_DEST() = TAB_SRC()
>Specify the sort key as restrictively as possible
>Use Append To, Insert Into, Collect Into rather than Move
>Compare tables with If Tab1() = Tab2()u2026
>Use Delete ITAB Whereu2026 instead of Loop At ITAB Whereu2026Delete..
>Use Case statements instead of If-constructions
>Use Call Functions wisely, Performs use less memory
>Use While instead of Do Exit
>Use Type I for Indices
>Keep Occurs clause realistic or use 0
>Use COMMIT WORK as appropriate to free the Data Base and preserve work
>
>Avoid:
>Using Shift inside a While-loop
>Leaving unneeded declarations in your program
>Using Move-corresponding for just a few fields
>Excessive nested includes within function calls
>Using DB field names if the value will be changed
>Using Occurs clause if only the header is needed
Thanks,
Naveen.I

Move Field from Stacked Canvas to Tab Canvas

Forms R2 10.1.2.0.2. Adding tab canvas to an existing form and want to retrofit a tab canvas into the form. When I move an existing field via the property sheet by changing Canvas and Tab page to Page, the field does not show. I can create a new field on the tab canvas with no problem. Is there a trick here that I am missing?

I figured it out. You have to reset the X & Y position with an offset of the 0,0 position. The Tab Canvas has it own Grid separate from the Main Canvas, which starts at 0,0. I should have seen it before creating this post.

How do you stop pictures from going into different rolls?

Everytime I transfer a picture into iPhoto it goes into a different roll. When it comes to finding these pictures, it can take a long time. Can anyone tell me how to make pictures all go to the same place?

Each import creates a new roll. You can't change this behavior.
You can edit your rolls. Select Library from the Source Pane. Go to View > Sort Photos > by Film Rolls. If rolls are closed you can Option-click on one roll's disclosure triangle to open all of them at once. Open the info pane at the lower left of the iPhoto window. Now any time you select a roll by clicking its title, you can edit its info in the info pane. You can edit the title, date, and comments. You can select photo(s) and move to another roll by dragging until a roll's title is highlighted, then drop. You can combine rolls or create new rolls.
I use large memory cards with my camera and import photos little by little, as I take them. I keep the photos from one card together in one roll. So each time I import, I immediately drag the new roll up to the existing roll for that memory card. This places those photos into the roll with the others, and deletes the newly created roll.

Update Z field from BSIK into BSAK when closing

Hi,
I have created Z field in BSIK table using "Append structure" option. I also created identical field via same option in table BSAK. When I clear open item system "delete" that item in table BSIK and create identical item in table BSAK (BSIK - open items; BSAK-closed items), BSIK and BSAK have same structure because of this trensfer of open items from BSIK to BSAK during open item clearing. My problem - when open item is cleared and item is transferd from BSIK to BSAK my Z field is not updated by system. Is it possible to set this in customizing or is there another way to update this Z field in BSAK when someone clear open items - user exit, modification or ???.
Thanks in advance.
Sasa

Hi Andreas,
than you for your responce.
I tried to find out suitable event for this in fibf but withouth success. Could you suggest event that will be suitable for this purpuse.
One more thing - if I reverse clearing (via transaction FBRA) system will transfer closed item from BSAK to BSIK and during that process Z field will not be updated so I also need event to update this field durind reverse clearing.
Thank you in advance.
Kind regards,
Sasa

Fields from screen are not known by program.

Hi All.
I have this problem since I started using Dialog programming.
Since I didn't attended any course I might be doing something wrong.
When you define a field in a Dialog screen and you want to refer to it in the program that calls that screen you get a compilation error that there is no such field.
If you define the field as at TABLE-FIELD you can work around this compilation issue by defining the TABLE using "tables: TABLE" statement, but now I have a problem since I don't want to use the TABLE-FIELD definition for my field and thus I'm stuck Shocked
Any help will be appreciated.
Ayal.

Hai,
If suppose, if you define a field in the screen, it is not mandatory to declare same variable in program level. If we take the same name, after completion of PBO the data automatically transferred to the screen field. If u don't take the same name then you need to pass value of the variable to the screen field in the PBO.
Example :
If suppose, you have a I/O field in the screen with name TEXT.
In the program
data : text(10) type C.
if that is 100 screen.
Process before output.
module display_100.
with in this module
text = 'SRIKANTH'.
this will directly display on the screen.

How to in-sync two fields value on two different tabs?

Hi,
I am using two tabs for master-detail relationship. First tab contains master block and second tab has detail block. User input date value in a field on master block and detail block date field should contain the same date value.
Version: FORM6i
Problem: If I use WHEN-VALIDATE-ITEM trigger on master block field and put code like this
:detblk.tdate : = mblk.tdate;
then second tab is halted b/c the data is only displayed when user click on the tab.
Please guide on this issue.
Regards
Kamran

Hello,
What about using when-tab-changed Trigger..
=================================
For me i had the same case but displaing the total summarized columnin the detail block in master bloclk too as total.
i used the post-change Trigger in the quantity-item which is summerized in total displayed item.
==========================================================
Hope this help too,
pls let me know what happened..?
regards,
Abdetu..

How to insert field from form into subject line of email

I have a form:
http://www.mcw.edu/FileLibrary/Groups/HMGC/Forms/HIPAAForms/HumanSequencingTertiaryAnalysi .pdf
and I would like to have the name of the person fill in automatically in the subject line. Right now when the email button is clicked the subject line reads: "Submitted Human Sequencing Tertiary Analysis Submission Form." Once the form is filled out, I would like the subject line to read: "[PI-Name] - Submitted Human Sequencing Tertiary Analysis Submission Form," (as highlighted below)
event.target.submitForm({cURL:"mailto:?subject=[PI-Name] - Submitted Human Sequencing Tertiary Analysis Submission Form&body=Please find attached the completed Human Sequencing Tertiary Analysis Submission Form.",cSubmitAs:"PDF",cCharset:"utf-8"});
I read the other discussion on this, but it didn't seem to pertain to me, or I just couldn't figure it out. Anyone have any ideas?
Thanks, Anne

Hi Anne,
This has come up several times on the forum. Most recently here, with links to examples and descriptions as to how it works: http://forums.adobe.com/message/4183125#4183125.
Hope that helps,
Niall

Download to excel in different tabs from bsp page

Hi all,
I have a requirement in which I have to download to xl-sheet in different tabs based on some conditions from a bsp page.
I am successful in downloading data into different tabs.
Now I had written the piece of code required to download to xl in a function module
and I am calling that function module when pressing a button in bsp page.
When I run the fm seperately its working but when I run it from bsp page its not working.But while debugging I found that the fm is being called and executed perfectly without any errors.
But the xl is not being created on our side.
Can anyone suggest me how to proceed on this.
Helpful answers will be rewarded.
Thanks,
Uga

Hi Raja,
Yes I am using ole objects.
For more clarity I am alos pasting my code.
If this is not possible then please guide how to achieve this in BSP.
*******************CODE*****************************************
include ole2incl.
data: w_cell1 type ole2_object,
w_cell2 type ole2_object.
*--- Ole data Declarations
data: h_excel type ole2_object, " Excel object
h_mapl type ole2_object, " list of workbooks
h_map type ole2_object, " workbook
h_zl type ole2_object, " cell
h_f type ole2_object, " font
gs_interior type ole2_object, " Pattern
worksheet type ole2_object,
h_cell type ole2_object,
h_cell1 type ole2_object,
range type ole2_object,
h_sheet2 type ole2_object,
h_sheet3 type ole2_object,
gs_font type ole2_object,
flg_stop(1) type c.
Internal table Declaration
data:gt_kna1 type standard table of kna1,
 gt_knvv type standard table of knvv,
 wa_kna1 type kna1,
 wa_knvv type knvv.
types: data1(1500) type c,
ty type table of data1.
data: it type ty with header line,
it_2 type ty with header line,
it_3 type ty with header line,
rec type sy-tfill,
deli(1) type c,
l_amt(18) type c.
data: begin of hex,
tab type x,
end of hex.
field-symbols: <fs> .
 constants cns_09(2) type n value 09.
assign deli to <fs> type 'X'.
hex-tab = cns_09.
<fs> = hex-tab.
data gv_sheet_name(20) type c .
SELECT kunnr name1
INTO corresponding fields of table gt_kna1
FROM kna1
UP TO 1000 ROWS.
SELECT kunnr vkorg
INTO corresponding fields of table gt_knvv
FROM knvv
UP TO 3 ROWS.
loop at gt_kna1 into wa_kna1.
concatenate wa_kna1-kunnr wa_kna1-name1 into it separated by deli.
append it.
clear it.
endloop.
loop at gt_knvv into wa_knvv.
concatenate wa_knvv-kunnr wa_knvv-vkorg into it_2 separated by deli.
append it_2.
clear it_2.
endloop.
if h_excel-header = space or h_excel-handle = -1.
*start Excel
create object h_excel 'EXCEL.APPLICATION'.
endif.
call method of h_excel 'Workbooks' = h_mapl.
set property of h_excel 'Visible' = 1.
*add a new workbook
call method of h_mapl 'Add' = h_map.
gv_sheet_name = 'KNA1'.
get property of h_excel 'ACTIVESHEET' = worksheet.
set property of worksheet 'Name' = gv_sheet_name .
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
data l_rc type i.
call method cl_gui_frontend_services=>clipboard_export
importing
data = it[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
*PERFORM err_hdl.
call method of worksheet 'Paste'.
****for second sheet**********
GV_SHEET_NAME = '2ND SHEET'.
gv_sheet_name = 'Knvv'.
get property of h_excel 'Sheets' = h_sheet2 .
call method of h_sheet2 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
importing
data = it_2[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
PERFORM err_hdl.
call method of worksheet 'Paste'.
Can you people give me inputs so that I can proceed further.
Thanks,
Uga

Combined more Data Fields from different segments in single report

Hi all,
i want to combined report from more then one segment(like 2 fields from Sales & Distribution & one Field from Inventory) then what should i do so far,
should i create cubes in respective segment,
either i create that but when i add it into Select item in that after selection of a field all of others segment disabled.

Hi
By far the simplest method would be to concatenate the two fields in a calculation like this: FIELDA || FIELDB
Should you want spaces between them then do this: FIELDA || ' ' || FIELDB
If you want a dash and spaces either side you do this: FIELDA || ' - ' || FIELDB
Does this help?
Best wishes
Michael

Header Text from VF01 into Line layout of F-30

Good day..
i Need help on this
I need to display the header text from VF01 into F-30 line layout
or
display the text field from fbl5n into line layout of F-30 Process Open Items.
thank you in advance

Hi,
As per your requirement is possible through by develop the Z tcode that means Zf-30, why because you didnt post the only acounting documents in this particular Tcode
Is this ok for you means, talk with the abper they will the changes as per your reuirement
Regards,
Kanike

Urgent...... how to select few fields, from database table, (dynamic ita.)

Dear all experts,
I am able to populate all fields data from database table, using dynamic table creation.
eg,
SELECT * FROM (w_tabname) INTO TABLE <t_itab>.
where w_tabname is the table name given by the user, and t_itab is field symbol.
but some requirement is like that i need to pick up only few fields, which user will give at the runtime.
I can take those fields from file into any internal table,
but the problem is that instead of select *, i need to put selected the fields given by user.
i have tried with field symbol, it is not working (as per my knowledge.)
do i need to create any structures dynamically ?
Can anybody please help in this regards ?
Your help will be surely rewarded with points.
Waiting for reply..
Regards
Vinay

Hi Vinay ,
Adding to the below code , you can use some more fields in the select stmt as below:-
REPORT ychatest.
PARAMETERS : p_field1 LIKE dd03l-fieldname,
 P_field2 LIKE dd03l-fieldname,
 p_table LIKE dd03l-tabname.
FIELD-SYMBOLS : <fs> TYPE STANDARD TABLE.
SELECT (p_field1) (p_field2) ( FROM (p_table) INTO TABLE <fs>.
Now p_field1 & p_field2 belong to the same table since you have give the user to enter only one table name.
This should work fine.
please try & let me know .
Thanks & Regards,
Daniel

Distribution of fields from screen into different tabs in tabstrip.

Similar Messages

Maybe you are looking for