DM mark deletion impossible?
I have a DSO -> IC scenario. I had to delete a request from the CUBE in order to be able to delete the DM mark in DSO and upload the same request again to the CUBE. So, i deleted the request from my CUBE but when i go the request in DSO and click the DM mark in order to delete it, there is nos "Garbage can" symbol there, so i can't delete ans thus i can't upload it again to my CUBE!!
Any ideas why the "Garbage can" symbols is not there?
Thanx
Hi,
Please try deleting the DM symbol through tables RSDMDELTA & RSBODSLOGSTATE.
1. Set the request's QM status in all your data targets to red and then delete all of them. This will cause a repeat delta load in the following steps.
2. Open table RSDMDELTA via SE16. Here is where you will find the successful DataMarted request. Delete the request that contains the bad data.
3. Open table RSBODSLOGSTATE and change fields 'Max. delta slice that was extracted by all receivers' and 'Max. delta slice extracted until now' to the latest right request number.
Once DM symbol is gone, try reloading.
Similar Messages
-
Mark deletion flag through ip25
Dear expert ,
If I mark a deletion flag to an maintenance plan through ip02 ,the user who changes and when changes, get reflect in ip16. but same if I do through ip25 (mass deletion flag ) then above field remains blank.
My question is some one mark deletion flag to a maintanance plan through ip25 then how I can find the user and changed date who changes maintenance plan.
I also check for IMG setting for plan categories (PM Order )change document indicator. but no result.
thanks and Regards,
Prasad KulthePrasad Kulthe,
Sounds like a bug...
Have a look on OSS, if you find nothing suitable, then open an OSS Message to SAP.
PeteA -
Not able to Close PO or Mark deleted
Hi All,
I have to close a PO but system doesnt allow to close it or mark the line Item as Deleted. The reason for the error is IR value is more than GR value. We dont have GR based IV.
How can I close the PO.
Thanks
NsandeepHi,
If there is difference in GR/IR it will not allow to delete the PO if IR is pending or More IR.
You can do post the difference in GR/IR.Using MR11 then it will be balance between GR/IR.
Once tis equal then you can delete the PO. by selecting the line item and set deletion button.
Rgs -
Application iCal deleted - Impossible to download iCal on my MacBook
Hi,
I accidentally deleted the application iCal from my MacBook, and now it is impossible to download it again!
I've been on the apple website and the only iCal available to download is iCal 1.5.5 but this version does not work because it is not compatible with OS X 10.4 or later which is my case!
Can someone help me or give me a link where I can download iCal like before?
Thanks a lotHi,
You should have iCal on the OSX installer disk.
See this Macworld article that discusses how to install it from there:
http://www.macworld.com/article/132243/2008/02/pacifist.html
You'll probably then need to run the OSX Combo updater to get it to the current version for your OS.
Best wishes
John M -
Events in Table Maintenence-for marking Deletion Flg when deleting frm SM30
Hi All,
I am tring to create a table maintenence.
In my table we have a field Deletion flag....
and as user hit delete in SM30 ..the record should not get delete ..but should mark the Deletion flag...
I am tring to use Events in the maintenence but didnt find this functionality..
Please suggest....
I dont want to use module program...
Thanks
RKHi,
refer below link you will get idea to hide delete button from TMG screen
Re: Disable delete button in Table Maintainance Generator -
How to make row deletion impossible?
Hello experts,
I have an editable ALV grid with the following data:
<b>ACCOUNT DESCRIPTION TAX</b>
1000200 revenue A0
1000100 cost V2
I want to make the deletion of second row impossible. (I dont want to disable the delete row button)
How do I achieve this?
Thanks,
YuvarajDATA pt_exclude1 TYPE ui_functions.
perform exclude_tb_functions CHANGING pt_exclude1.
*--e.g. initial sorting criteria, initial filtering criteria, excluding
--functions
CALL METHOD gr_alvgrid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING = <b>pt_exclude1</b>
IT_HYPERLINK = ls_hyperlink
CHANGING
it_outtab = itab[]
it_fieldcatalog = gt_fieldcat
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4 .
IF sy-subrc <> 0.
--Exception handling
ENDIF.
*& Form exclude_tb_functions
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions .
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>MC_FC_LOC_COPY .
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>MC_FC_LOC_COPY_ROW .
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>MC_FC_LOC_CUT .
APPEND ls_exclude TO pt_exclude.
<b> ls_exclude = cl_gui_alv_grid=>MC_FC_LOC_DELETE_ROW .
APPEND ls_exclude TO pt_exclude.</b>
ls_exclude = cl_gui_alv_grid=>MC_FC_LOC_INSERT_ROW .
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>MC_FC_LOC_MOVE_ROW .
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>MC_FC_LOC_PASTE .
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>MC_FC_LOC_PASTE_NEW_ROW .
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>MC_FC_LOC_UNDO .
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>MC_FC_LOC_APPEND_ROW .
APPEND ls_exclude TO pt_exclude.
ENDFORM . "exclude_tb_functions -
Dear Experts
How to mark UOM a deletion flag .ie no body can use UOM
Regards
RajHi
I dont think there is any Mark to deletion is applicable in UOM
Go to Tcode : CUNI, select the UOM and delete it....
Pl Not : Make sure that no one is using the UOM, otherwise, it wil give inconsistency error
- Pithan -
Have I overlooked it?
At my imap email account when deleting a message I only mark it as deleted. (And then ocasionally clean folders of them.) But N97 shows them all still as normal emails and I found no option to hide them.
Also I would like that delete is not a hard delete, but just a marking as deleted as I do it form Outlook.
If this is not available, this would be definitely a feature request, then.
btw.: what is this stupid function in the forum message editor about, that 'return' swaps the direction of writing ?!Update,
I tried something:
If I unsubscribed from the ELTE It was synchronized the INF subscribed directory too.
My real directory tree on the gmail server is the following:
inbox
ELTE
--Bejovo
----ETR
--Kimeno
INF
--Bejovo
----NSN
--Kimeno
Mailbox
--Bejovo
--Kimeno
Sent Items
I think the problem is the same subdirectory names, if it is that is a serious bug...
Mammut -
Mark / Delete prior feature
If anyone's used a Blackberry, there seems to be a glaring omission in the iPhone's email app: the ability to simply mark all messages from a certain date backward as having been already read, or to just delete them. Having 200+ emails just freshly downloaded, clicking every-single-email-over-and-over-wearing-out-my-thumb to delete them is nonsense! Is there a better way? There's no shift-click sort of function to almost accomplish the same thing. Is there a tool/app I can download to better manage my iPhone email?
Sorry, just had to chime in. I agree that your suggestion would be useful, maybe in 2.0x we'll get it. Far from perfect, by still far superior to that thing you mentioned that business users have been forced to live with all these years. Bye bye RIM....
Via my iPhone -
"Special Characters" Accent Marks delete letter
Hello fellow Pages users,
I can't quite figure out how to solve a little problem I'm experiencing in Pages. In a text document, I am trying to put an accent mark over a letter (like the diacritical marks one finds over letters in dictionaries to help with pronunciation). I highlight the letter I want to accent, and then I select "Special Characters" from the Edit menu. In the "Character Palette," I select the accent mark I want to use (which is listed under "Punctuation"). But when I select "Insert," the accent mark replaces the letter I want to accent! All I have left is an accent mark on the document, which is useless without the letter it is supposed to accent!
I was wondering whether anyone has encountered this problem (if it is a problem--maybe I'm just going about this the wrong way) and whether there is a workaround. Thank you very much for your time; please let me know if I need to clarify anything.
Kind regards,
Chris
P.S. I could just use Microsoft Word, but (1) since my computer is fairly new, I don't have Word at the moment and (2) I would like to learn how to do this in Pages, if it is possible. Please forgive me if this topic has already been covered; I tried to "search" for this topic, but had trouble isolating this specific problem in the Discussions.Hello Starfighter
The characters you are selecting from the Punctuation section of the Character Pallette are separate characters - they don't overlay other characters. What you need to do is select a Latin font and pick your character with the accent from there.
It might be simpler for you to use the keyboard viewer instead. When you hold down the ⌥ key you will notice that several of the keys on the keyboard appear orange. This is because they are designed to work in combination with another keystroke to input an accented character e.g. The sequence ⌥ u e will produce the character ë.
I hope that helps. -
Marked with Deletion Flag reflecting in reports...
Hi All,
We have created many reports and sqvi querys, After marked deletion flag for material it is reflecting in reports and queries. What will be reason and how it will be avoid in reports.
YusufHi,
This is just one of the problems with writing custom reports. They have to consider things like deletion flags, delivery completed flags, special stocks etc.
There is no simple answer other than to correct the custom reports and get them to check all relevant flags.
Better still, try to use std SAP reports wherever possible, avoid creating new reports just to reformat the data slightly or to produce reports that are "nice to have" rather than actually required (I am not saying this is what you have done)
Steve B -
How do I delete cascade with a PL/SQL procedure?
This script will create a PL/SQL procedure that deletes cascade. This is a post to contribute to the Oracle community. Take the code as is and test it before you use it in production. Make sure this is what you want.
Procedure Delete Cascade (prc_delete_cascade)
Description
=============
The principle is very simple. The procedure uses a table called TO_BE_DELETED to keep a list of records to be deleted. This
table keeps the table name and the rowid of those records that need to be deleted. The procedure also uses a function called
DELETE_BOTT_ROW which takes one record of the table and tries to delete it. If the deletion fails with a foreign key constraint
violation, the function parses the SQL error message (SQLERRM) to get the name of the constraint. With the name of the constraint,
the function finds the name of the child table, all the child records that have references to the parent table primary or unique key,
and the parent key primary or unique key column name. Once the child records of the failed delete are identified, the function takes their table name and rowids
and records them into the TO_BE_DELETED table by inserting records of their table name and their rowids. Al the records inserted also contain the level (which
is 1 for the original records, 2 for child records, 3 for granchild records, etc.) and the sequence number of the order in wich they
are recorded. This way, when the function picks up a record to be deleted, it takes the one with the highest level and the highest
inserted sequence, or the "bottom" record. Once all the child records of the failed delete are appended to the TO_BE_DELETED table, it calls itself
recursevely, and the function takes the record at the "bottom" of the table and tries to delete it. If it succeeds, it calls
itself recursevely to delete the next record. If it fails, it goes and finds the child records as described before and once they are
inserted into the TO_BE_DELETED table, it calls itself again recursevely to try to delete again the "bottom" record. All records
that are successfully deleted are flagged as deleted usig the flag_del column so they are not pickt up again. Once all the (parent,
child, grandchild, etc.) records are deleted, the procedure ends without commiting, giving the option to the user to commit or
rollback deletions. The table TO_BE_DELETED is, at the end of the procedure, a list of all the records that were deleted, including their table names
and the order in with they were deleted. The user then can review its content and decide to commit or rollback.
Restrictions
============
1. Single tables only. The procedure only takes one table name and a WHERE clause to identified the records to be deleted.
2. Single columns only. Ther procedure only works with single-column primary, unique and foreign key constraints.
3. Single schema only.
4. Unpredictable results with circular references.
drop table to_be_deleted purge;
create table to_be_deleted
(tname varchar2(30) -- table name
,rid rowid -- rowid
,lvl number -- level: 1=parent, 2=child, 3=grandchild, etc.
,seq_ins number -- sequence order of record inserted
,flg_del char -- flag deleted: Y=record deleted
,seq_del number -- global order of record deletion
set serveroutput on size 1000000
create or replace procedure prc_delete_cascade
(p_tname varchar2 -- table name
,p_where varchar2 -- where clause identifying records to be cascade deleted
is
dummy char;
v_sqlcode number;
v_sqlerrm varchar2(32767);
v_param_val integer := 0;
v_sql varchar2(4000);
v_ret_cde number;
e_bad_params exception;
v_iter number;
v_plvl number;
v_seq_del number;
v_max_iter number := 1000000000;
function delete_bott_row
return number
is
v_sql varchar2(4000);
v_ptname varchar2(30); -- parent table name
v_ppkname varchar2(30); -- parent primary key constraint name
v_ppkcname varchar2(30); -- parnet primary key column name
v_prowid rowid;
v_crowid rowid;
v_ctname varchar2(30); -- child table name
v_cfkname varchar2(30); -- child foreign key constraint name
v_cfkcname varchar2(30); -- child foreign key column name
v_ins number;
v_seq_ins number;
v_sqlerrm varchar2(4000);
v_sqlcode number;
e_const_viol exception;
pragma exception_init(e_const_viol, -2292);
e_max_iter_reached exception;
begin
v_iter := v_iter + 1;
if v_iter >= v_max_iter then
raise e_max_iter_reached;
end if;
dbms_output.put_line('- Iter '||to_char(v_iter));
dbms_output.put_line('----------');
dbms_output.put_line('- Starting function delete_bott_row');
v_sql := 'select tname, rid, lvl, seq_ins from (select * from to_be_deleted where flg_del = ''N'' order by lvl desc, seq_ins desc) where rownum=1';
-- dbms_output.put_line('- SQL: '||v_sql);
execute immediate v_sql into v_ptname, v_prowid, v_plvl, v_seq_ins;
dbms_output.put_line('- Selected row: table name: '||v_ptname||', level: '||v_plvl||', seq: '||v_seq_ins);
v_sql := 'delete from '||v_ptname||' where rowid='''||v_prowid||'''';
dbms_output.put_line('- SQL: '||v_sql);
execute immediate v_sql;
dbms_output.put_line('- Row deleted !!!');
v_ret_cde := 1;
v_seq_del := v_seq_del + 1;
dbms_output.put_line('- Mark the row deleted');
v_sql := 'update to_be_deleted set flg_del = ''Y'', seq_del = '||to_char(v_seq_del)||' where tname='''||v_ptname||''' and rid='''||v_prowid||'''';
-- dbms_output.put_line('- SQL: '||v_sql);
execute immediate v_sql;
-- dbms_output.put_line('- Updated table to_be_deleted, row marked deleted');
-- dbms_output.put_line('- End of iter '||to_char(v_iter));
dbms_output.put_line('----------');
-- call function delete_bott_row recursively
v_ret_cde := delete_bott_row;
return 0;
exception
when no_data_found then
dbms_output.put_line('- Table to_be_deleted is empty, delete cascade has completed successfully.');
v_ret_cde := 0;
return 0;
when e_const_viol then
v_sqlcode := SQLCODE;
v_sqlerrm := SQLERRM;
v_ret_cde := v_sqlcode;
dbms_output.put_line('>Constraint Violation. Record has children');
-- dbms_output.put_line('Error code: '||to_char(v_sqlcode));
v_cfkname := substr(v_sqlerrm,instr(v_sqlerrm,'.')+1,instr(v_sqlerrm,')') - instr(v_sqlerrm,'.')-1);
dbms_output.put_line('>Child FK name: '||v_cfkname);
select table_name, column_name
into v_ctname, v_cfkcname
from user_cons_columns
where constraint_name=v_cfkname;
dbms_output.put_line('>Child table name: '||v_ctname||'. FK column name: '|| v_cfkcname);
select constraint_name, column_name
into v_ppkname, v_ppkcname
from user_cons_columns
where constraint_name = (select r_constraint_name
from user_constraints
where constraint_name=v_cfkname);
dbms_output.put_line('>Parent PK/UK name: '||v_ppkname||'. Parent PK/UK column: '||v_ppkcname);
v_sql := 'insert into to_be_deleted(tname, rid, lvl, seq_ins, flg_del) '||
'select '''||v_ctname||''', rowid, '||to_char(v_plvl+1)||', rownum, ''N'' '||
'from '||v_ctname||' '||
'where '||v_cfkcname||' =any (select '||v_ppkcname||' from '||v_ptname||' where rowid =any (select rid from to_be_deleted where tname = '''||v_ptname||'''))';
-- dbms_output.put_line('- SQL: '||v_sql);
execute immediate v_sql;
select count(*)
into v_ins
from to_be_deleted
where lvl = v_plvl+1
and tname = v_ctname
and flg_del = 'N';
dbms_output.put_line('>Found '||to_char(v_ins)||' child records which were added to table to_be_deleted');
v_ret_cde := delete_bott_row;
return v_ret_cde;
when e_max_iter_reached then
dbms_output.put_line('Maximum iterations reached. Terminating procedure.');
raise;
when others then
raise;
end delete_bott_row;
begin
dbms_output.put_line('Beginning');
dbms_output.put_line('================================');
-- validate p_table
begin
select 'Y'
into dummy
from user_tables
where table_name=upper(p_tname);
exception
when no_data_found then
v_param_val := 1;
dbms_output.put_line('Table '||p_tname||' does not exist.');
raise e_bad_params;
end;
dbms_output.put_line('- Parameter p_tname validated');
-- validate p_where
begin
execute immediate 'select ''Y'' from '||p_tname||' where '||p_where INTO dummy;
exception
when no_data_found then -- where clause returns no records
dbms_output.put_line('Record(s) not found. Check your where clause parameter');
v_param_val := 2;
raise e_bad_params;
when too_many_rows then -- found multiple records means it is ok
null;
when others then -- any other records means where clause has something wrong.
dbms_output.put_line('Where clause is malformed');
v_param_val := 2;
raise e_bad_params;
end;
dbms_output.put_line('- Parameter p_where validated');
if v_param_val > 0 then raise e_bad_params; end if;
v_iter := 0;
v_plvl := 1;
v_seq_del := 0;
v_sql := 'insert into to_be_deleted(tname, rid, lvl, seq_ins, flg_del) select '''||upper(p_tname)||''', rowid, '||to_char(v_plvl)||', rownum, ''N'' from '||p_tname||' where '||p_where;
dbms_output.put_line('- Inserting initial record');
dbms_output.put_line('- SQL: '||v_sql);
execute immediate v_sql;
dbms_output.put_line('- Record(s) inserted');
dbms_output.put_line('- Calling function delete_bott_row to delete last row of table to_be_deleted');
dbms_output.put_line('-----------------------------------');
v_ret_cde := delete_bott_row;
-- dbms_output.put_line('- Back from function delete_bott_row');
-- dbms_output.put_line('Return code: '||to_char(v_ret_cde));
dbms_output.put_line('- End of procedure');
exception
when e_bad_params then
dbms_output.put_line('Bad parameters, exiting.');
end;
show errors
spool prc_delete_cascade.log
-- Call to the procedure
exec prc_delete_cascade('xent','xent_id between 1669 and 1670')
select tname "Table Name", count(*) "Rows deleted"
from to_be_deleted
group by tname;
spool off
set lines 120
select *
from to_be_deleted
order by seq_del;
prompt Now commit or rollaback deletions.
-- commit;
-- rollback;Edited by: Rodolfo4 on Mar 23, 2011 10:45 AMInteresting.
I see a few areas where this could be useful. Elimiating specific test records from a Test DB for example.
Some comments:
<li>Since this is a recursive logic you must add a stop criteria. In this case I would add a max iteration variable. If that one is reached, raise an error message and let the procedure stop with that error.</li>
<li>The when others exception at the end should be removed completely</li>
<li>The when others exception in the middle should be replaced by a specific exception that handles the -2292 error</li>
<li>A list of tables where no record should be deleted could be usefull. If the logic would encounter such a table, it should also stop. This would be to prevent that data from some system critical tables could be deleted per accident.</li>
<li>The reference from the FK constraint to the PK constraint should include the table name and if possible the owner (as long as you use user_* views the owner is always the same. But we could extend this to the ALL_* views). I never met a system where different tables have the identical FK constraint names, however just make this fool proof.</li> -
How to delete all contents in the LiveCache
Hi,
Is there an easy way to delete all LiveCache contents (all SNP and DP data)?
Thanx for quick infoAdditional information...!
Hi
In APO SNP, if you only delete the time series it will not delete the inactive material from it.
If you go to APO material master i.e. /SAPAPO/MAT1 - Product you will still find your inactive products. By deleting the time series, you are only deleting the data from time series key figures, but you will still have the data in order series key figures.
You can require to delete these products by mainly using following steps.
a) Remove product from integration model
b) Delete all orders for this product-location which still exist in the APO system by running the reports /SAPAPO/RLCDELETE or /SAPAPO/DELETE_PP_ORDER (this report is not recommanded to be used in product system!!) or transactions /SAPAPO/RRP4 or /SAPAPO/RRP4.
c) Use transaction /sapapo/ccr to delete all objects in APO that are integrated with R/3. The /sapapo/ccr will show the orders as 'Not in an active integration model' and offers to delete the orders in APO
d) Delete the product from ATP tables by running the report /SAPAPO/SDORDER_DEL with the selection according to the product being deleted. (Orders from DB & live cache)
e) Delete all related product substitution and location product substitution using the transaction /SAPAPO/RBA04;
f) Delete the product from all PPMs through the transaction /SAPAPO/SCC05;
g) Remove the product from external procurement using the transaction /SAPAPO/PWBSRC2;
h) Remove the product from transportation lanes through the transaction /SAPAPO/SCC_TL1 or /SAPAPO/SCE; Note: If the lane was created with option 'All products', you should not care about this condition.
i) Remove the product from quota arrangement through the transaction /SAPAP/SCC_TQ1;
j) Remove references from the product master or the location product master using the transaction /SAPAPO/MAT1, tab 'Classification';
k) Remove the planning package from the location product master using the transaction /SAPAPO/MAT1, tab 'PP/DS';
l) Remove the product from RTO;
m) Remove the product from product split.
2. Mark deletion flag
a) In transaction /SAPAPO/MAT1, select the product (and location in case of location product);
b) In the menu bar, choose 'Product' and go to 'Mark for deletion' (Shift+F6);
c) In the popup 'Set deletion Flag' set a flag in the appropriate field: Leave the field 'Product' empty unless you want to delete the product master, i.e. in case a location product must be deleted, the flag has to be set on location only;
d) The deletion can be executed directly or be scheduled for another time.
Use Report /SAPAPO/DELETE_PRODUCTS for deletion.
Once you delete all the products, than you can again open the CIF to bring in the new products.
I hope this will helpful to you.
Thanks
Amol -
PR to PO with deletion indicator problem
Hello,
I need to one e.g. in conversion process. I have 3 line items and created PR with that.
Now after creation of PR marked deletion indicator on second line item and save the PR. Now after release when i convert
this from PR to PO i am not getting proper results. I want to know whether system will be able to create PO for line item 1 and line item 3 and ignore line item 2? . Also i want that both 1 and 3 line items should be one PO, no searate PO should be issued.
How can we achieve this.
Thanks
HimanshuHi Himanshu ,
By adopting the PR to the PO via the shopping cart button all marked documets of the overview are copied onto the overview.
As a workaround you could control the selection of PR, you could select the 'open only' checkbox in the selection screen in
the overview. Then the deleted items should not appear on the overview and therefore will not be adopted to the purchase order. Another option is to use the 'deletion indicator' in the variant for purchase requistion therfore excluding the
deleted items in your selection.
Kind regards,
Lorraine -
Deletion of a line item from PO
Hi,
I have a PO with only one line item, where the line item is created with reference to PR and PR is created from Production order.
The GR and IR is done for PO.
But the line item is marked for deletion after IR.
Now i want to undelete the line item.
When i press undelete/unlock tab, it is througing an error
Requisition 90043093, item 00002, created from production order.
help how to undelete the line item.
I think many question will come to mind
1) Why you marked delete for a item after doing GR and IR.
But user did it with out knowledge.
I have tested the following scenarios...
1) I created a PO with referece to PR. Did GR and IR. Then marked for deletion of line item in PO. It allows for deletion. Then in change mode of PO i undelete/unlock. It allows to unlock with warning message. delivery completed.
But it is not i case of PO with referece to PR and PR is cretead from production order.
relavent answers rewarded with points.
Thanks
GiriHello Girisha,
Note the error message number and change the message settings from Error to warning in message attribution and then try to delete it.
Incase, you are not able to do that, I suggest to open issue with SAP through OSS.
Regards
Arif Mansuri
Maybe you are looking for
-
File not found in my media player but yes it's fou...
Yup so, I got my Nokia C6 phone about two months ago, and everything has been working perfectly until these past weeks. When I connect my phone with the USB-cabel to my PC, everything is still working alright. Then I go to Windows Media Player, and i
-
Battery drain after updating to iOS 5.1.1
After doing the update to iOS 5.1.1 the phone is getting hot "warm" near the processor and the battery drains about 1% per 10 mins in standby and 10X when running an app. Meaning that the phone will run about 6 hours when it used to run for 48 hours
-
How do you have two classes drawing to the same JPanel? Graphics g problem
Hi all, This is probably a five second answer but im really stuck on it! How do i have two classes both writing to the same JPanel? I have one class that extends JPanel and using Graphics g, draws to the panel ie g.drawString(..); But i would like an
-
How do I purchase a photo album?
On iPhoto, I have built a photo album that I plan on purchasing. At the bottom of the screen, is a button that says "Buy Book". This button takes me nowhere and has no effect on anything. How do I purchase this album?
-
I have an all in one 3135 Photosmart. I can scan fine, the issues are related to printing. I have the blinking top 2 lights only, the check paper and check cartridge. I went thru all the online troubleshooting steps. I do get an error on my computer