DMS-KM connector and active version in DMS

I was wondering if it possible to bring back only the active version of a document using the DMS connector?? We created a varient but do not see anywhere to specify that we only want to Active version to be returned... so for each document we get every version...
Cheers,
Derek

Hi Derek,
if this is not a configuration option in the DMS repository manager, does it at least return a KM property for "active=yes/no" or similar?
If it does that, you could implement your own repository filter on that basis or access the DMS resources via query-based taxonomies that either do or do not allow certain values for that property.
Regards,
Karsten

Similar Messages

Controlling Access of end users on Categories and Activity versions

Dear All,
I am having end users who are having full access in learning Administrator for Creating Categories and Activity versions , Offerings and Classes in using Learning Administrator responsibility.
As per the business needs i need to create a new responsibility where end users can not create categories & Activity version but they can create only offerings & classes on selected Activity version.
your guide lines will be greatly appreciated.
Thanks & Regards,
Edited by: user1113648 on Apr 28, 2011 11:55 AM

Hi CDA
You're not understanding the way Discoverer works. The lowest level of security control that can be applied inside Discoverer is at the business area level. Thus if a user has access to any part of a business area then they have access to the whole business area. This is done by your administrator using TOOLS | SECURITY from the Administration menu bar.
The privileges that can be set using TOOLS | PRIVILEGES control what a user can do with the data that they have access to (remember that access itself is at the business area). Thus if a user has the Create / Edit workbook privilege and they have access to two business areas then they have that privilege for both business areas and create or edit workbooks to their heart's content in both of them.
Further, and I think this is where you may be getting confused, you have to understand that an end user cannot grant the privilege for another end user to have access to their business area simply by sharing a workbook. The act of sharing a workbook does not share the access rights. In order for one user, aka the Registrar, to be able to run a workbook that was created by another user, aka the HR director), the Registrar must already have been granted access to the HR business areas by the Discoverer administrator. If a user does not have access to a business area but does have access to a workbook from that business area then they will not be able to execute the workbook.
It therefore sounds like you do not have security under control.
Best wishes
Michael
BTW: Are you using the SunGard Banner system by any chance, and are you using the ODS? If this is the case, you may be interested in knowing that my company has partnered with SunGard Higher Education to bring Discoverer training and consulting to their customers.

Where do I download and activation version of Adobe Acrobat 7.0 professional?

I have Adobe Acrobat 7.0 Professional. When I am at the download site for activation I only see Acrobat 7.0 Standard and 8.0 Professional.

Kglad,
Thank you for your answer. However, when I follow the link in the instructions for the English version, it brings me to this URL. http://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2%5Fdownloads. The list of downloads does not include Acrobat Pro 7.0 When I download, this is the Acrobat Standard version, as titled.

Active and delivery version of ODS

hi
can we check or compare ther delivery version and active version of the infosource.
is there any transaction or table other than RSA1-business content where we can compare objects in infosource.

Hi,
RSIS info source for transaction data
RSOS info source for master data, texts, hierarchies
Regards
Siddhu

Transporting active version of datasource from DEV to PRD

Hi,
When I transport a 3.x datasource from DEV to PRD, the version I am getting in PRD is 'modified'. In DEV we have both modified and active versions and there's no difference between them. When I try to activate the modified version, it says that I have to maintain the transfer rules associated with the datasource. Then it takes me to the transfer rules display but I am not sure what to do next...how to activate the datasource. How do I get the active version from DEV to PRD?
Thanks

Hi,
Pls Refer this link for details about transporting BI Objects
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps,
Regards
CSM Reddy

The Flash Player is not running but it is there and it is enabled and Active X is not checked. The Player version is 16.0.0.305. I have the latest ie11 and the latest W8.1. I have used the Adobe tool to delete the Flash and subsequently I have updated or

The Flash Player is not running but it is there and it is enabled and Active X is not checked. The Player version is 16.0.0.305. I have the latest ie11 and the latest W8.1. I have used the Adobe tool to delete the Flash and subsequently I have updated or reloaded Flash using your updater. I have gone into IE options and insured that the settings are supportive of Flash. The Adobe mini Flash test program on your site says it not enabled or Active X is enabled - not true - all is set as it should be. I have gone through your forums but to no avail. I've looked in MS forums but nothing that made any difference. What's going on and what can I do about it?

Try using Firefox. Flash usually works on Firefox when it won't on Safari. I noticed that the Safari does not show the same version as Firefox does. Iwonder if that could be the problem. Safari on the left shows 10.1, Firefox show 10.3

My ipad air was bought and activated AFTER September 1st and I downloaded pages, keynote and numbers. I then changed my Apple ID as the password no longer worked, these apps were also deleted I order to be updated. Now I cannot get the free version. Help?

My ipad air was bought and activated AFTER September 1st (activated December 25th) and I downloaded pages, keynote and numbers. I then changed my Apple ID as the password no longer worked, These apps had to be deleted as I needed to update them. Now I cannot get the free version on my ipad. I have searched the internet to see if there is a solution, and I found a few but unfortunately none have worked. I desperately need these apps as my iPad is used for school. Is this an issue I should take up with the apple support centre or something? Please help! Thanks

How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
 Cheers, Tom

I am having problems launching the standalone version of Lightroom 6 after I have gone through the install and activation process? Lightroom starts to open but "hangs" before any photos in the catalgue are displayed. I have contacted the chat support twic

I am having problems launching the standalone version of Lightroom 6 after I have gone through the install and activation process? Lightroom starts to open but "hangs" before any photos in the catalgue are displayed. I have contacted the chat support twice but they have not been able to fix the problem.

I went through the activation process yesterday and shut down my PC when I went to bed last evening. When I got up this morning and turned my PC on and then started Lightrom 6 (I upgraded from version 5) it started to launch but then just hung and became "not responsive". I I then uninstalled and then reinstalled the product today but the same thing happened. What is weird is that when I install from the standalone file I downloaded when I purchased the upgrade it looks like it's downloading the software again over the Internet? I have been having these problems for the last four or five days. I have contacted the chat support folks twice and they were able to get it working but whatever they did did not last as the problem reappeared again once the PC was shut down and then started up again.

I restore my US version iphone 5s by connecting itunes after restore it shows hello and select country, and activation, but it does not activating why? is it work in china ?

i restore my US version iphone 5s by connecting itunes after restore it shows hello and select country, and activation, but it does not activating why? is it work in china ?

If the iPhone is locked to a US carrier, you cannot use the SIM card of another carrier on it to either activate it or use the iPhone.
If you want to use your iPhone with China unicom, you need to get it unlocked by your US carrier. Contact them to see what their unlocking policy is and if you qualify.

Transfering Master and Transaction data to active and non active versions

Hi Gurus,
I am planning to transfer ECC master and transaction data to APO active and simulation versions.My question is
1. Is it possible to release Master and transaction data to active and non active versions ?
2. How i need to config if i want to release Master and Transaction data in version 001?
Please let me know .
Thanks in Advance
Regards,
Raj

Hi Raj,
1) Once you create active integration models for master data and
transactional data, the data will get updated in active version 000
2) For creation of non active version use transaction
/SAPAPO/MVM
3) For copying of data from active to non active version, use
transaction /SAPAPO/VERCOP
Regards
R. Senthil Mareeswaran.

Active version and Inactive version in Product llocation plan

Hi Gurus,
We are using product allocation functionality, in which i would like to what is the importance of active and Inactive versions.
Which is the version in which we need to maintain the product allocation (MC94).
Regards,
Babs.

Hi dsk,
Thank you for the feedback on active version and inactive version.
My doubt is if you look in to transaction MC94 , we have two tabs one u201CActive versionu201D and other u201CInactive versionu201D.
When I maintained product allocation in Active version u201CA00u201D and executed the sales order product allocation is not happening. And then I tried to maintain the allocation under Inactive Version u201C000u201D then executed the sales order. Now the product allocation is happening and even the structure is getting updated after saving the sales order. So I need to under stand under which version we need to maintain the allocation so that allocation functionality will work during sales order creation.
Regards,
Babs

Error while Releasing a transport request - DSO 0SD_O03: Active version

Hi all,
I am getting below error when I am trying to release a transport request.
Object ODSO 0SD_O03: Active version differs from modified version.
I activated DSO again,but I was not successful to correct the error.Please help me correcting this error.
Regards,
Bob

check
match and copy while installing the business content
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.With the most important object types, the active version and the SAP delivery version can be matched.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually.
A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content.
When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Installindicator separately.
The active version is overwritten with the delivery version if
 the match indicator is not set and
 the install indicator is set.
check following thread
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true
Thanks and regards
Kiran

Media Encoder error about activation when exporting in activated version of Premiere CS4

I get the following error when I try to export media in Premiere CS4 (Note: I have a legal and activated copy of CS4 Master Collection). In Premiere, it appears to go through (the loading progress bar fills and then disappears) but when I check the folder, it's empty. And then I notice that there's another icon in my taskbar and oh hey, it says "AMT Subsystem Error: Thank you for using Adobe Media Encoder CS5. The Adobe product that installed Media Encoder has not activated. Please launch and activate that Adobe product before continuing to use Media Encoder."
I'm using Windows 7 x64 (8gb of RAM). I tried installing the patch as suggested in this thread: http://forums.adobe.com/thread/719451 but it only claimed to not have the corresponding program installed. I tried checking to see if there were any updates - there weren't.
A quick check on my computer reveals that both Media Encoder CS4 and CS5 are installed. I looked to see if there was a way to uninstall the CS5 version but didn't see it. The only way I think I could have gotten it was though some sort of Adobe update.
Any ideas of how to fix this?

Hi: I have the same problem, but it happened very suddenly and after very specific updates. I successfully encoded a file using the CS6 encoder. Then, I allowed updates to Adobe Media Player and Adobe Air. I tried to encode with CS6 again and it had stopped working - all in the space of 5 minutes. A reboot did not help. I also have CS4 and CS 5.5 installed and have had all along (which means that you can have them and use the CS6 encoder). Since I can no longer use the CS6 encoder, but am able to launch an older one, I am using that for the moment. I hope that this reply will be of some help in finding a solution.

Active version of BW Data Source Dev Appears inactive in Q

Hi All,
This is urgent..needs to move to prod today but I am stuck in D still!
Does anyone know why a particular BW data source which is active inn Dev might appear to be inactive in Q after the transport?
We tried manual replication, transporting replica and reapplying the transports, recollecting the data source in both r3 and BW
I also verified that I am collecting the active version in my transport
Thanks,
DB
Points will be assigned if I can get rid of this issue!
Edited by: Darshana on Jul 14, 2008 7:34 PM
Edited by: Darshana on Jul 14, 2008 7:34 PM

Hello Darshana,
Make sure the appropriate "Conversion of Source System names after transport" are maintained in target system QA and Prod.
RSA1 > Tools >...
Darshana,
Follow the above path...Go to Datawarehousing Workbench in QA tcode RSA1 and on the top you will see Tools > and follow from there...
Hope this helps....
Edited by: Chetanya Thanneer on Jul 14, 2008 10:15 PM

OBIEE 11G with Single Sign-On and Active Directory

Hi guys,
Release Version: Oracle Business Intelligence 11.1.1.5.0
Patch applied: 11.1.1.5.0 BP3 (Patch 13832750)
OBIEE Server operating system: Windows Server 2008 SP2 (32-bits Operating System).
We are trying to configure Single Sign-On according to TechNote_WNA_SSO_AD_V4.0.doc.
Our krb5login.conf:
com.sun.security.jgss.krb5.initiate {
com.sun.security.auth.module.Krb5LoginModule required
principal="[email protected]"
keyTab=cgdkobi2.keytab
useKeyTab=true
storeKey=true
debug=true
com.sun.security.jgss.krb5.accept {
com.sun.security.auth.module.Krb5LoginModule required
principal="[email protected]"
keyTab=cgdkobi2.keytab
useKeyTab=true
storeKey=true
debug=true
We generate de keytab file:
C:\OracleBI11g\user_projects\domains\bifoundation_domain>C:\OracleBI11g\jrockit_160_24_D1.1.24\bin\ktab.exe -k cgdkobi2.keytab -a [email protected]
Password for [email protected]:XXXXXXX
Done!
Service key for [email protected] is saved in cgdkobi2.keytab
C:\OracleBI11g\user_projects\domains\bifoundation_domain>C:\OracleBI11g\jrockit_160_24_D1.1.2-4\bin\kinit -k -t cgdkobi2.keytab cgdkobi2
New ticket is stored in cache file C:\Users\cgdkobi2\krb5cc_cgdkobi2
C:\OracleBI11g\user_projects\domains\bifoundation_domain>C:\OracleBI11g\jrockit_160_24_D1.1.2-4\bin\klist -k -t cgdkobi2.keytab
Key tab: cgdkobi2.keytab, 1 entry found.
[1] Service principal: [email protected]
KVNO: 1
Time stamp: Mar 15, 2013 10:34
C:\OracleBI11g\user_projects\domains\bifoundation_domain>klist
Current LogonId is 0:0x406163f5
Cached Tickets: (0)
We re-start the services and logon into analytics web and SSO doesn't work but there's not an error. It runs successfully with and Active Directoy user and password. Seems like SSO wasn't enabled, but I checked is enabled.
Any suggestion?
Thanks in advanced

Follow the posts : OBI 11.1.1.6.SSO and You are not currently signed in to Oracle BI Server" for OBIEE 11.1.1.6 SSO do the troubleshooting mentioned there.
Also check your logs for error like the one below:
[2012-03-09T16:42:36.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.securitysubsystem.checkauthentication.runimpl] [ecid: 6c98b5cce1f24814:2a613331:135f95fbdff:-8000-0000000000005b7a,0:1:1] [tid: 5932] Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)[[
If you are getting this when you login to OBIEE : You are not currently signed in to Oracle BI Server"
then you need to apply this patch : 13553428 QA:BLK:DELIVER TO CORP. OID LDAP USERS FAILED WITH IMPERSONATOR DOES'NT EXIST. 11.1.1.6.0 Generic Platform (American English) General Oracle BI Suite EE Apr 5, 2012 799.4 KB
Let us know the updates. Hope this helps. Mark if it does.!
Thanks,
SVS

DMS-KM connector and active version in DMS

Similar Messages

Maybe you are looking for