Active version and Inactive version in Product llocation plan

Hi Gurus,
We are using product allocation functionality, in which i would like to what is the importance of active and Inactive versions.
Which is the version in which we need to maintain the product allocation (MC94).
Regards,
Babs.

Hi dsk,
Thank you for the feedback on active version and inactive version.
My doubt is if you look in to transaction MC94 , we have two tabs one u201CActive versionu201D and other u201CInactive versionu201D.
When I maintained product allocation in Active version u201CA00u201D and executed the sales order product allocation is not happening. And then I tried to maintain the allocation under Inactive Version u201C000u201D then executed the sales order. Now the product allocation is happening and even the structure is getting updated after saving the sales order. So I need to under stand under which version we need to maintain the allocation so that allocation functionality will work during sales order creation.
Regards,
Babs

Similar Messages

  • Difference between Active DCs and Inactive DCs?

    Difference between Active DCs and Inactive DCs?

    Hi Jyothi,
    PFB link for the clear Explanation on the Active and Inactive DC views
    [http://help.sap.com/saphelp_nw70/helpdata/en/2b/e4a43f4aa1330ee10000000a114084/content.htm]
    Regards,
    Govindu

  • Active and inactive program

    Hello Gurus,
          I have following three question about active and inactive program:
          (1)  what is the difference for active program and inactive program ?
          (2) I wonder if  there are inactive and active version for all program ?
          (3) I want to editing a program in operation. How can I get that ?
    thanks very much!

    Hi,
    Only activated objects can be accessed by all the users. If the object is under developement only active version is visible to everybody which can be accessed.
    An object may have any number of inactive versions, but it isi invisible to other users. It is confined only to your worklist. once you activate this it will beactivated and will be available for whom so ever it is authorized.
    By activating the object, the system checks the syntax of the entire object, then creates an active version, generates a runtime version, and deletes the corresponding entry from your inactive object list. Only active versions can be transported to other systems.
    <REMOVED BY MODERATOR>
    Thanks,
    Imran.
    Edited by: Alvaro Tejada Galindo on Apr 28, 2008 12:58 PM

  • No active  version in object selection list

    In an DP planning book, when i go for object selection the active version 000 is not been displayed
         how to retain the active version in the particular planning book???
    pls help to do the same

    Hi !
    The Planning Version displayed in the planning book, is the planning version used when you initialize the Planning Area. If there is no selection the Planning area is not initialized. If there is more than 1 selection, the planning area has been initialized for multiple selections.
    Under the Planning Book/Data view section of the shuffler, right mouse click on the book you are using and select: information about Planning Book. You will see the Planning area and a green or red flag. Click the details to go to the specific planning area. You can create (initialize the planning area) time series objects or see the 'created' time series objects.

  • Active AND inactive BOM

    Hi Experts,
    Is there any transaction which let us know about Active BOM
    and Inactive Bom Status seperately.
    Regards,
    Siddarth

    Dear Siddartha Surya,
    Check out this,
    1.If the BOM status is 01 - active means for any material then the same can be executed & checked
    using T codes CS11,CS12,CS13.
    2.If the BOM status is 02 - inactive means for any material then the same *cannot be executed &
    checked* using T codes CS11,CS12,CS13.
    check and reply whether works or not.
    Regards
    Mangalraj.S

  • Displaying active and inactive links in a table.

    Hi all,
    I'm trying to display active links and inactive links in a table.  The problem that I have is that the inactive links are grey, I would like them to appear like normal text in a textview.  From what I understand, I can't have two different celleditor types in the same column, so there goes that idea.
    Does any one have any suggestions on how I may be able to display this intermixing?

    Hi Michael,
    you're right, as for now there is only one cell editor assotiated with one column, probably in near future that won't change.
    Maybe you should try to change the stylesheet of your application?
    Best reagrds,
    Christian

  • Active version of BW Data Source Dev Appears inactive in Q

    Hi All,
            This is urgent..needs to move to prod today but I am stuck in D still! 
    Does anyone know why a particular BW data source which is active inn Dev might appear to be inactive  in Q after the transport?
      We tried manual replication, transporting replica and reapplying the transports, recollecting the data source in both r3 and BW
      I also verified that I am collecting the active version in my transport
    Thanks,
    DB
    Points will be assigned if I can get rid of this issue!
    Edited by: Darshana on Jul 14, 2008 7:34 PM
    Edited by: Darshana on Jul 14, 2008 7:34 PM

    Hello Darshana,
    Make sure the appropriate "Conversion of Source System names after transport" are maintained in target system QA and Prod.
    RSA1 > Tools >...
    Darshana,
    Follow the above path...Go to Datawarehousing Workbench in QA tcode RSA1 and on the top you will see Tools > and follow from there...
    Hope this helps....
    Edited by: Chetanya Thanneer on Jul 14, 2008 10:15 PM

  • Production Order in In-Active Version

    Hi All,
    Need your expert help...
    I have a production order for Assembly product (say A1). In this order, under component view, we have component (say C1).
    in MD04 for C1..,
    a) I see the dependent requirement
    I created a simulated version such that it considers the firm receipts from active version.
    Now, in MS04 for C1,
    a) I see the dependent requirement.
    My requirement is to remove the depenent reuirement in active version, but to retain the dependent requiremnt in in-active version.
    How to do that..?
    As of now, when i remove the component from Production order, its impacting both my active and in-active versions (ie., its kicking off component in both MD04 & MS04)
    Thanks,
    Krishna

    Hi,
    There could not be a simulative dependent requirement for a production order. What you can do is to create an independent requirement in the version which your LTP scenario supports, and simulate the dependent requirement in active version.

  • Copy Inactive Version to Active Version in MC78

    Hi PP Gurus,
    I am not able to copy the inactive version (019) to Active Version (A00) in TCode MC78, it gives the message A00 already exists.
    But when i want to transport the values to Demand Mangement (thru TCode MC75) it will ask for Active Version.
    Please suggest where am i doing wrong?
    Thanks in Advance,
    Regards
    Rehman
    Points will be Rewarded for a Detail Answers.

    Hello Rehman,
    The message what you are getting is standard and warning message. It is not the error message.
    While copying from inactive version to avtive version (A00), this will populate, you just have to enter omce again, then you will get one more pop-up saying "A00 will be reset", agaian you have to accept the message.
    Now you check your version will be copied from MC88 transcation by clicking on active version.
    If problem solves rewards your points.
    Regards
    TAJUDDIN

  • Inactive version to active version

    Hi Gurus.
    In this scenario I want to convert the PIR's that I am getting from APO in inactive version and I want to convert it into active version before running the MRP.Pls suggest how to do it?

    Hello Dardo,
        Mostly you can do planning with different version numbers in planned independent requirent.Unless and until you active the version, it will not transfer the independent reqmt to stock requirement list.
         To active any version number, go to change mode (T.C MD62) and give the material number, plant and version number which you want to activate and press enter, it will go to next screen.There besides material name field there is check box for version.Just tick that.Now if you see in stock reqmt list (T.C MD04) you will see the indep reqmt got transfered.
          Hope this way you will resolve your problem.

  • I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help

    I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help

    Have you worked through the tt2 user tip:Troubleshooting issues with iTunes for Windows updates this is the best source on resolving iTunes for Windows issues.

  • Controlling Access of end users on Categories and Activity versions

    Dear All,
    I am having end users who are having full access in learning Administrator for Creating Categories and Activity versions , Offerings and Classes in using Learning Administrator responsibility.
    As per the business needs i need to create a new responsibility where end users can not create categories & Activity version but they can create only offerings & classes on selected Activity version.
    your guide lines will be greatly appreciated.
    Thanks & Regards,
    Edited by: user1113648 on Apr 28, 2011 11:55 AM

    Hi CDA
    You're not understanding the way Discoverer works. The lowest level of security control that can be applied inside Discoverer is at the business area level. Thus if a user has access to any part of a business area then they have access to the whole business area. This is done by your administrator using TOOLS | SECURITY from the Administration menu bar.
    The privileges that can be set using TOOLS | PRIVILEGES control what a user can do with the data that they have access to (remember that access itself is at the business area). Thus if a user has the Create / Edit workbook privilege and they have access to two business areas then they have that privilege for both business areas and create or edit workbooks to their heart's content in both of them.
    Further, and I think this is where you may be getting confused, you have to understand that an end user cannot grant the privilege for another end user to have access to their business area simply by sharing a workbook. The act of sharing a workbook does not share the access rights. In order for one user, aka the Registrar, to be able to run a workbook that was created by another user, aka the HR director), the Registrar must already have been granted access to the HR business areas by the Discoverer administrator. If a user does not have access to a business area but does have access to a workbook from that business area then they will not be able to execute the workbook.
    It therefore sounds like you do not have security under control.
    Best wishes
    Michael
    BTW: Are you using the SunGard Banner system by any chance, and are you using the ODS? If this is the case, you may be interested in knowing that my company has partnered with SunGard Higher Education to bring Discoverer training and consulting to their customers.

  • HT1338 I am using 10.5.8 and for a particular product download I need version 10.6.8. Any advice would be appreciated

    I am using 10.5.8 and for a particular product download I need version 10.6.8. Any advice would be appreciated

    You need to click here, buy the DVD, install it, and run Software Update.
    (74763)

  • Activation.jar and mail.jar version ????

    I have deployed a web service in Weblogic v7.0 which accepts DataHandler as one
    of its paramters ( for attachments).
    When I invoke from a soap client (weblogic v8.0) it works fine. For using with
    soap client (weblogic v7.0) its
    gives a serializer exception.
    What version of activation.jar and mail.jar should I use for sending attachment
    from weblogic 7.0 client.
    Regards
    Kumar Raj

    Hi Kumar,
    Could you post the exception traceback and clarify the configuration
    (v7.x client to v7.x server fails, but v8.1 client to v7.x server works
    OK?)
    You may also want to take a look at the docs on creating portable stubs
    [1] associated with creating the client jar.
    Thanks,
    Bruce
    [1]
    http://edocs.bea.com/wls/docs81/webserv/client.html#1076586
    Kumar Raj wrote:
    >
    I have deployed a web service in Weblogic v7.0 which accepts DataHandler as one
    of its paramters ( for attachments).
    When I invoke from a soap client (weblogic v8.0) it works fine. For using with
    soap client (weblogic v7.0) its
    gives a serializer exception.
    What version of activation.jar and mail.jar should I use for sending attachment
    from weblogic 7.0 client.
    Regards
    Kumar Raj

  • Transfering Master and Transaction data to active and non active versions

    Hi Gurus,
                 I am planning to transfer ECC master and transaction data to APO active and simulation versions.My question is
    1. Is it possible to release Master and transaction data to active and non active versions ?
    2. How i need to config if i want to release Master and Transaction data in version 001?
    Please let me know .
    Thanks in Advance
    Regards,
    Raj

    Hi Raj,
    1) Once you create active integration models for master data and
    transactional data, the data will get updated in active version 000
    2) For creation of non active version use transaction
    /SAPAPO/MVM
    3) For copying of data from active to non active version, use
    transaction /SAPAPO/VERCOP
    Regards
    R. Senthil Mareeswaran.

Maybe you are looking for