DMZ Configuration for Sourcing
Hi,
We're configuring DMZ to enable Sourcing module for a bank to provide supplier access. One of the key concern for the bank is how much of DB is exposed through external web-server. Any thoughts on this one? Does the external web server (in DMZ) talk to DB directly without going through internal app server? Will the file upload hit DB directly without going through App Node?
In case if the answers to above questions are yes then what are the alternatives available to avoid DB being exposed through external server directly?
Thanks,
Viral Dhruv
Hi Viral,
Does the external web server (in DMZ) talk to DB directly without going through internal app server?
Yes, It the external domain (DMZ) communicates directly with the DB without the intervention of internal apps node.
The main objective of setting up a DMZ is to deploy security on the internal data. When setting up DMZ you have the option of including multiple firewalls so that data access is restricted. This is well explained in the below note.
Please see:
Oracle E-Business Suite R12 Configuration in a DMZ (Doc ID 380490.1)
In case if the answers to above questions are yes then what are the alternatives available to avoid DB being exposed through external server directly?
Please see:
How To Configure Firewall When Remoting Container Sits Inside DeMilitarized Zone (DMZ) (Doc ID 1149388.1)
Hints and Tips for Troubleshooting the URL Firewall (410-Gone on DMZ External Tiers) (Doc ID 460564.1)
Thanksk &
Best Regards,
Asif
Similar Messages
-
ACE: Significance of mask in nat-pools configured for Source NAT
Hi guys
If I am using source nat in ACE (One IP address 10.10.10.200) used for all client address translations.
What would be the difference between the nat-pools configured with different netmask.
What is the recommended netmask for pat, 255.255.255.255 or Vlan interface's Mask (/24 in this case)
and why?
case1:
interface vlan 7
ip address 10.10.10.100 255.255.255.0
nat-pool 1 10.10.10.200 10.10.10.200 netmask 255.255.255.0 pat
service-policy input clientvips
no shutdown
case2:
interface vlan 7
ip address 10.10.10.100 255.255.255.0
nat-pool 1 10.10.10.200 10.10.10.200 netmask 255.255.255.255 pat
service-policy input clientvips
no shutdown
Thanks in Advance
A.Gilles
Thanks a lot. It makes more sense now.
I posted another question for an ACE design validation. Could you please validate this
I am planning to deploy ACE module in following manner:
> ACE will be in one arm mode ( Only one vlan connected to the ACE).
> Vips & Rservers (all serverfarms) will be in the same Vlan X.
> Default gateway on the ACE & Real servers will be the upstream router
> There will be Source NAT configured for all Serverfarms.
ACE --- Vlan X -------Router--- internet
.................|
.................|-- Sfarm 1
.................|
.................|-- Sfarm 2
.................|
.................|-- Sfarm n
I am pretty sure that it should work.
Just wanted an expert opinion.
Thanks -
DMZ Configuration for entire 11.5.10.2 instance
Hi All,
We are having SCM, financials and hrms(core without sshr,Irecritment/OLM)
modules implementation for one of our client ( 11.5.10.2 on Solaris 10).
Clients have ordered Hardware as folows.
2 No's Externel application servers with network loadbalancer
2 No's Internal Application servers with network load balancer
2 No's database servers with RAC
For 11.5.10.2 on Sun solaris.
My doubt is we are not using any i-modules(means Web enabled modules) but
client requirement is they have to use this application from internet as
well as from LAN/WAN users.
Is We can Do entire application DMZ for internet users and How ? Please
let me know the steps?
This is the first time i am configuring DMZ. can you please help me out
Thanks and Regards
VasuIf you are not following the standard DMZ config you should at least consider putting in a reverse proxy server. You will probably want to investigate the built in url filter to see if you can utilize it. There are also security companys that provide tools and consulting services that could be of help, http://www.integrigy.com comes to mind.
I don't like the idea of exposing the entire ebusiness suite on the internet. Unless you can keep up with all of the security patches the risk to your business may outway the benefit. -
DMZ Apache with OAS WebCache configuration for 11i
Hi,
We have the following configuration in place (using note DMZ Configuration with Oracle E-Business Suite 11i [ID 287176.1])
1. Browser (https) --> Internet --> |firewall| --> DMZ Apache reverse proxy server (https) --> |firewall| --> External 11i webtier (http) --> Internal 11i apptier --> Database
Now, we want to change it, so that the following configuration can work.
2. Browser (https) --> Internet --> |firewall| --> DMZ Apache reverse proxy server (https) --> |firewall| --> OAS WebCache (https) --> Internal 11i apptier --> Database
no cluster, no load balancer, no RAC in this configuration.
The user access are the same in #1 and #2: External users access 11i via "partners.external.com", while internal users use "employees.internal.com". Apache server in DMZ is the Entry Point.
Note "Installing and Configuring Web Cache 10.1.2 and Oracle E-Business Suite 11i [ID 306653.1]" is to set up WebCache as Entry Point for 11i. If we use it, external users are not able to access 11i system with "partners.external.com".
Question:
can #2 configuration be set up and work? which Oracle doucuments to follow?
Thanks in advance,Hi,
with following steps in 306653.1, profiles s_webentryhost and s_login_page are set with WebCache servername.
The access for internal users is working with URL https://webcachesername.internal.com/oa_servlets/AppsLogin
but external users cannot log in: at logon page, after typing username/password,
the logon page is refreshed back to the same logon page. If typing a wrong password, "Login failed" error shows as expected.
Thanks, -
ORA-06550/PLS-00201 error while configuring data source
Hi,
My development platform is Visual Studio 2005, ODAC11g Release 1 (11.1.0.6.20), and Oracle 10g Release 2 database.
I tried to setup a sqlDatasource in my web page using drag and drop features
When I configure the sqlDatasource to use a stored procedure inside a package,
I notice that odp.net uses #0# as separator (instead of .) between package name and procedure name in Configure Data Source dialog box. Then when I clcik the Test Query button, I got following error.
There was an error executing the query. Please check the syntax of the command and if present, the types and values of the parameters and ensure they are correct.
ORA-06550: line 1, column 7:
PLS-00201: identifier 'PK_LOOKUP_TABLE#0#P_LIST' must be declared
ORA-06550: line 1, column 7
PL/SQL: Statement ignored
It looks like odp.net cannot locate PK_LOOKUP_TABLE#0#P_LIST.
Is there any workaround ?
Below is the stored procedure code. It compiles and runs without problem.
PACKAGE BODY pk_lookup_table
AS
/* Get a list of lookup table name */
PROCEDURE P_LIST (
O_CURSOR OUT sys_refcursor )
IS
l_cur sys_refcursor;
BEGIN -- executable part starts here
OPEN l_cur FOR
SELECT table_name
FROM all_tab_comments u
WHERE u.comments LIKE '%Lookup Table%'
ORDER BY 1;
o_cursor := l_cur;
END P_LIST;
END "PK_LOOKUP_TABLE";
On the sqlDataSource property sheet, if I click the Select Query property, the Command and Parameter Editor will open, then I can change the select command name to PK_LOOKUP_TABLE.P_LIST. Then if I run the application, I get another error.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'P_LIST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Seems that it can locate the procedure.
In the Command and Parameter Editor dialog, I can add output parameter, but data type is restricted. There is no REF CURSOR datatype in the dropdown list.
How can I add output parameter with REF CURSOR type via IDE ?
Thanks for the time looking into this issue.
MansionHi
Even I faced this problem while connecting to RMAN . But I feel your problem is different .
My issue was like this
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_BACKUP_RESTORE.SET_CHARSET' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
RMAN-04015: error setting target database character set to WE8MSWIN1252
Solution :
execute catproc.sql; -
Error in the configuration for sap logon tickets
Hi Forum,
I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
<b>Error in the configuration for SAP logon tickets</b>
But if I click "Yes", system displays cockpit.
How can I avoid this error.
Thanks in advance
Regards
ShridharYou will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
Cheers,
Darren. -
Hyperion Planning 9.3.1 "Configure Data Sources" freezes at Essbase conf
Hi!
I am setting up a demo environment of Hyperion Planning for one of our customers (my first time installing this application). The platform is Windows Vista Business 32-bit. RDBMS is Oracle 10g on another machine. I've successfully installed Hyperion 9.3.1 Shared Services, Essbase, Essbase Admin Services and Planning application.
I've successfully configured all the applications (with the Configuration Utility) besides Hyperion Planning. I can access Workspace, User Management Console, Essbase Administration Services (and connect to my localhost Essbase server from there), etc - thus I believe that the installations and configuration of these modules is successful.
When I try to finish my Hyperion Planning configuration with the utility, the last step is to "Configure Data Sources" (previous configuration steps including "Product Instance Registration" were successful).
I start the configuration utility, select the properties, enter the Oracle db connection properties (no error there), then enter the Essbase connection properties (the same which enable me to add this server in the Essbase Administration Services, view and start applications, etc) and the installer just freezes.. hangs indefinitely..
Server: localhost
uid and password are the ones I provided during essbase installation/configuration
I've tried this configuration step multiple times, I've restarted the machine. The maximum time I've waited is ~30min.
Questions:
# Is it normal for the Essbase configuration page to freeze after clicking "Next" for 30min (maybe I'm just impatient, I'm new to Hyperion)
# What could be wrong?
# How could I see the error message - is there an error log somewhere?
Many thanks for your time.
EringmaeI believe this is the error message:
Availability Date is 20051231
Exception in thread "AWT-EventQueue-0" java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseEnv.<clinit>(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.TestEssConnection(Unknown Source)
at com.hyperion.planning.HspDSEssbasePanelManager.TestEssConnection(HspD
SEssbasePanelManager.java:156)
at com.hyperion.planning.HspDSEssbasePanelManager.queryExit(HspDSEssbase
PanelManager.java:132)
at com.hyperion.cis.config.wizard.ProductCustomInputPanel.queryExit(Prod
uctCustomInputPanel.java:114)
at com.installshield.wizard.awt.AWTWizardUI.doNext(Unknown Source)
at com.installshield.wizard.awt.AWTWizardUI.actionPerformed(Unknown Sour
ce)
at com.installshield.wizard.swing.SwingWizardUI.actionPerformed(Unknown
Source)
at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationControlle
r.notifyListeners(Unknown Source)
at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationControlle
r.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Sour
ce)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source) -
Advanced selection for source file
Hi,
Requirement: One source directory, multiple file names. File needs to be picked up from source directory and send to target directory with same name as source file name.
Source file name pattern sample: AP5_X_yyyyddmm, A35_X_yyyyddmm, AP5_Y_yyyyddmm, AP5_Y_yyyyddmm.
Target file name should be :AP5_X_yyyyddmm, A35_X_yyyyddmm, AP5_Y_yyyyddmm, AP5_Y_yyyyddmm
Can we define multiple place holders as :
Directory
File Name Mask
Exclusion Mask
\\Source
AP5_X*.txt, A35_X.txt, AP5_Y*.txt, AP5_Y*.txt
When I tried for single place holder, the scenario was working but when I tried adding multiple place holders it was not working.
How can we achieve the above scenario?
Thanks,
VertikaHi Amit,
Thanks for reply.
Yes you understood it right.
I am able to achieve this now. The only change that I did is instead of giving all the placeholders in same line I have given it in different lines and this is working now.
Sender Adapter Configuration: Checked Advanced selection for source file and used Adapter specific message attributes to keep same file name as source file name.
File Name Mask
File Name Mask
Exclusion Mask
\\Source
AP5_X*.txt
\\Source
A35_X*.txt
\\Source
AP5_Y*.txt
\\Source
A35_Y*.txt
I am closing this thread now.
Thanks,
Vertika -
How to configure for remote JMS client?
I have my own Java JMS test program for performance measurements.
I am using the JNDI and JMS provider functionality of the WebLogic 9.1 app-server but my test program is just pure JMS 1.02 sender/receiver clients - ie it is NOT part of, or deployed as a J2EE application.
SINGLE MACHINE TEST
===================
In a single machine environment I was able to
- configure a JMSServer
- configure a JMSSystemModule
- configure resources for ConnectionFactories and Queue and Topics
I then made what I believe to be a 'standalone' application module copied from some mysystemmodule-jms.xml and with that I somehow worked out how to deploy it using the weblogic.Deployer tool.
The deployment apparently set up the JNDI and my JMS client could gain access to the administered objects and do what it does.
Everything works.
TWO MACHINE TEST
================
I now have a second machine.
I want to put my JMS sender client on this new machine and I want the JMS server and JMS receiver client to be unchanged from the SINGLE MACHINE TEST.
But I really don't know quite how to proceed from here...
Do I need to install the WebLogic app-server on the sender machine or is the weblogic.jar all I need?
What is necessary configuration for JNDI access on the sender machine?
Can I in fact use my original SINGLE MACHINE server unchanged as I am hoping?
I don't think I want a "thin" client because I read that performance is impacted (and these are performance tests)
Remember this is NOT a J2EE application. There is no MDB; no client-container; no descriptors etc. Maybe that makes it more complicated - I don't know.
Sorry for such basic questions but if somebody can just point me to an appropriate example or tutorial it could save me days...
Thankyou.Hi,
My problem is on similar lines. I have an applet based UI working on RMI/t3 protocol.
I am using weblogic 9.2 as my app server.
When my applet is executed on JRE 1.5x it works fine.
But when I use JRE1.4x it gives the following exception
java.lang.NoClassDefFoundError: javax/management/InvalidAttributeValueException
at weblogic.rmi.internal.Stub.<clinit>(Stub.java:21)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at weblogic.rmi.internal.StubInfo.class$(StubInfo.java:34)
at weblogic.rmi.internal.StubInfo.<clinit>(StubInfo.java:34)
at java.lang.Class.forName0(Native Method)
I have analyzed the reason for this.
the class javax/management/InvalidAttributeValueException was included in java 1.5 and above. So JRE 1.4 does not have it.
In previous versions of weblogic this class was a part of their 'weblogic.jar' file and in weblogic 9.2 it is not a part of weblogic.jar file so when I am using JRE1.4 and weblogic 9.2 then it obviously does not find this class hence the above exception.
I tried to put this all together and made custom made client jar file incliding the necessary classes. I was able to get throght this exception only land up in following exception.
java.lang.VerifyError: class weblogic.utils.classloaders.GenericClassLoader overrides final method .
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFactoryDelegate.java:204)
at weblogic.jndi.spi.EnvironmentManager$DefaultFactoryMaker.<clinit>(EnvironmentManager.java:26)
at weblogic.jndi.spi.EnvironmentManager.getInstance(EnvironmentManager.java:48)
at weblogic.jndi.Environment.getContext(Environment.java:307)
at weblogic.jndi.Environment.getContext(Environment.java:277)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
I really need to support clients using Jre 1.4 and Jre 1.5
I will really appreciate any help on this one.
Please advise.
Thank you all. -
Error 404: No target servlet configured for uri: +websphere 6.0
My server is running properly, but I got Error 404: No target servlet configured for uri: error while launching my project on web sphere 6.0
see my web.xml and strut-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
id="WebApp_ID"
version="2.4"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>supportPortalWeb</display-name>
<servlet>
<servlet-name>action</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>detail</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>validate</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet>
<servlet-name>OrganizationDataServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.OrganizationDataServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>OrderProcessingServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.ordermgmt.OrderProcessingServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>OrganizationValidationServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.OrganizationValidationServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>ProductValidationServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.ProductValidationServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>ProductGradeServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.ProductGradeServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>action_tmp</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>3</param-value>
</init-param>
<init-param>
<param-name>detail</param-name>
<param-value>3</param-value>
</init-param>
<load-on-startup>0</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>OrganizationDataServlet</servlet-name>
<url-pattern>/servlet/OrganizationDataServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>OrderProcessingServlet</servlet-name>
<url-pattern>/servlet/OrderProcessingServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>OrganizationValidationServlet</servlet-name>
<url-pattern>/servlet/OrganizationValidationServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProductValidationServlet</servlet-name>
<url-pattern>/servlet/ProductValidationServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProductGradeServlet</servlet-name>
<url-pattern>/servlet/ProductGradeServlet</url-pattern>
</servlet-mapping>
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>/WEB-INF/spring-config/spring-config.xml</param-value>
</context-param>
<listener>
<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
</listener>
<jsp-config>
<taglib>
<taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-html.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-nested.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-nested.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-template.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-template.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-tiles.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-tiles.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/epc.tld</taglib-uri>
<taglib-location>/WEB-INF/supportportal.tld</taglib-location>
</taglib>
</jsp-config>
<resource-ref>
<res-ref-name>jdbc/SupportPortalDataSource</res-ref-name>
<res-type>java.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
<!-- Data Sources -->
<data-sources />
<!-- Form Beans -->
<form-beans>
<form-bean name="signOnHandlerForm" type="com.harcourt.supportportal.struts.signon.actionform.SignOnHandlerForm" />
<form-bean name="signOffHandlerForm" type="com.harcourt.supportportal.struts.signon.actionform.SignOffHandlerForm" />
<form-bean name="updatePersonForm" type="com.harcourt.supportportal.struts.sample.actionform.UpdatePersonForm" />
<form-bean name="searchPersonsForm" type="com.harcourt.supportportal.struts.sample.actionform.SearchPersonsForm" />
<form-bean name="updateProductForm" type="com.harcourt.supportportal.struts.product.actionform.UpdateProductForm"/>
<form-bean name="searchProductsForm" type="com.harcourt.supportportal.struts.product.actionform.SearchProductsForm"/>
<form-bean name="searchOrganizationForm" type="com.harcourt.supportportal.struts.mdr.actionform.SearchOrganizationForm"/>
<form-bean name="updateOrganizationForm" type="com.harcourt.supportportal.struts.mdr.actionform.UpdateOrganizationForm"/>
<form-bean name="exportOrganizationForm" type="com.harcourt.supportportal.struts.mdr.actionform.ExportOrganizationForm"/>
<form-bean name="exportProductForm" type="com.harcourt.supportportal.struts.product.actionform.ExportProductForm"/>
</form-beans>
<!-- Global Exceptions -->
<global-exceptions />
<!-- Global Forwards -->
<!-- Action Mappings -->
<action-mappings type="org.apache.struts.config.SecureActionConfig">
<action
path="/start"
type="org.apache.struts.actions.ForwardAction"
parameter="loginRendererDef"/>
<!-- <action -->
<!-- path="/product"-->
<!-- type="org.apache.struts.actions.ForwardAction"-->
<!-- parameter="productInputDef"/>-->
<action path="/product" type="org.springframework.web.struts.DelegatingActionProxy"
name="updateProductForm" parameter="method" scope="request" validate="false">
<forward name="success" path="productInputDef"/>
<forward name="failure" path="productInputDef"/>
</action>
<!-- <action -->
<!-- path="/organization"-->
<!-- type="org.apache.struts.actions.ForwardAction"-->
<!-- parameter="organizationIndexDef"/>-->
<action
path="/report"
type="org.apache.struts.actions.ForwardAction"
parameter="reportIndexDef"/>
<action
path="/user"
type="org.apache.struts.actions.ForwardAction"
parameter="userIndexDef"/>
<action path="/login" type="org.springframework.web.struts.DelegatingActionProxy" name="signOnHandlerForm" scope="request" input="loginRendererDef" validate="true">
<set-property property="secure" value="false"/>
<forward name="success" path="loginLandingDef" />
<forward name="failure" path="loginRendererDef" />
</action>
<!-- sample -->
<action path="/updatePerson" type="org.springframework.web.struts.DelegatingActionProxy" name="updatePersonForm" scope="request" input="productInputDef" validate="true">
<set-property property="secure" value="false"/>
<forward name="success" path="personIndexDef" />
<forward name="failure" path="personInputDef" />
</action>
<action path="/searchPersons"
type="org.springframework.web.struts.DelegatingActionProxy"
name="searchPersonsForm"
scope="request"
parameter="method"
validate="true">
<set-property property="secure" value="false"/>
<forward name="success" path="personIndexDef" />
<forward name="failure" path="loginRendererDef" />
</action>
<!-- end sample -->
<action path="/updateProduct" type="org.springframework.web.struts.DelegatingActionProxy"
name="updateProductForm" parameter="method" scope="request" input="productInputDef" validate="true">
<set-property property="secure" value="false"/>
<forward name="success" path="loginLandingDef" />
<forward name="failure" path="/product.do?method=createOrUpdateProduct" />
</action>
<action path="/deleteProduct" type="org.springframework.web.struts.DelegatingActionProxy"
name="updateProductForm" parameter="method" scope="request" validate="false">
<set-property property="secure" value="false"/>
<forward name="success" path="loginLandingDef" />
<forward name="failure" path="/product.do?method=createOrUpdateProduct" />
</action>
<action path="/searchProducts"
type="org.springframework.web.struts.DelegatingActionProxy"
name="searchProductsForm"
scope="request"
parameter="method"
validate="true">
<set-property property="secure" value="false"/>
<forward name="success" path="productSearchDef" />
<forward name="failure" path="loginLandingDef"/>
</action>
<action path="/loadProducts" type="org.springframework.web.struts.DelegatingActionProxy"
name="searchProductsForm" parameter="method" scope="request" validate="true">
<forward name="success" path="productIndexDef"/>
<forward name="failure" path="userIndexDef"/>
</action>
<action path="/exportProduct" type="org.springframework.web.struts.DelegatingActionProxy"
name="exportProductForm" parameter="method" scope="request" validate="true">
<forward name="failure" path="loginLandingDef" />
</action>
<!-- Organization Actions -->
<action path="/searchOrganization" type="org.springframework.web.struts.DelegatingActionProxy"
name="searchOrganizationForm" parameter="method" scope="request" validate="true">
<forward name="success" path="orgSearchDef"></forward>
<forward name="failure" path="loginLandingDef"/>
</action>
<action path="/organization" type="org.springframework.web.struts.DelegatingActionProxy"
name="updateOrganizationForm" parameter="method" scope="request" validate="false">
<set-property property="secure" value="false"/>
<forward name="success" path="orgInputDef" />
<forward name="failure" path="loginLandingDef" />
</action>
<action path="/loadOrganizations" type="org.springframework.web.struts.DelegatingActionProxy"
name="searchOrganizationForm" parameter="method" scope="request" validate="true">
<forward name="success" path="orgIndexDef" />
<forward name="failure" path="loginLandingDef" />
</action>
<action path="/updateOrganization" type="org.springframework.web.struts.DelegatingActionProxy"
name="updateOrganizationForm" parameter="method" scope="request" input="orgInputDef" validate="true">
<forward name="success" path="/loadOrganizations.do?method=loadOrganizations"></forward>
<forward name="failure" path="/organization.do?method=createOrUpdateOrganization"/>
</action>
<action path="/exportOrganization" type="org.springframework.web.struts.DelegatingActionProxy"
name="exportOrganizationForm" parameter="method" scope="request" >
<forward name="failure" path="loginLandingDef" />
</action>
</action-mappings>
<!-- Register Support Portal RequestProcessor -->
<controller>
<set-property property="processorClass" value="com.harcourt.supportportal.struts.common.action.SupportPortalRequestProcessor" />
</controller>
<!-- Message Resources -->
<message-resources parameter="com.harcourt.supportportal.resources.ApplicationResources" />
<!-- tiles plugin -->
<plug-in className="com.harcourt.supportportal.tiles.SupportPortalSecureTilesPlugin">
<set-property property="definitions-config" value="/WEB-INF/tiles-def/tiles-defs.xml" />
<set-property property="httpPort" value="80"/>
<set-property property="httpsPort" value="80"/>
<set-property property="enable" value="false"/>
<set-property property="addSession" value="false"/>
</plug-in>
<!-- spring plugin -->
<plug-in className="org.springframework.web.struts.ContextLoaderPlugIn">
<set-property property="contextConfigLocation" value="/WEB-INF/spring-config/spring-config.xml"/>
</plug-in>
</struts-config>If your EAR has actually started, try this:
http://publib.boulder.ibm.com/infocenter/wasinfo/v6r0/index.jsp?topic=/com.ibm.websphere.zseries.doc/info/zseries/ae/xrun_jvm_sendredirect.html
If you are not on z/OS, the link is actually under server->server infrastructure->Java and process management->environment entries
for setting the property -
Dynamic configuration for the application
I'm a newbie and trying to evaluate JSF. I took part in a project with struts framework and i could say i don't like struts cause of some limitation and i suspect that JSF has the same limitation. First of all, there are JSP pages. I can't use JSP pages/templates stored somewhere else except web application. I'd like to store my templates in the database. This will give me ability to add/change/remove jsp page without redeploying war-archive. Yes, i can use exploded war-archive and add JSP pages straight into file system, but i don't like this way. Next problem is the configuration file like struts-config (faces-config, whatever). I have to write down all my navigation logic and beans mapping to this file and it's really annoying me. This kind of project requires dynamic configuration for the all web application and i'd like to add/change/remove pages, beans, actions without restarting/reconfiguring webapp. Today, I looked thru documentation and source code and found that FactoryFinder class could use my own classes but i'm not sure it will be enough for the dynamic configuration for the beans. In any case, it's a huge problem with the templates.
Right now i'm thinking about 1(one) JSP with XML/XSLT rendered HTML content and JSF for event/action handling. I mean, i'll use XSLT to render dynamic content and JSF for dispatching events. In that case i have to render form tag names in the HTML as JSF engine (i'm not sure if it possible). If it will take a lot of time to do this i'll have to switch a home-grown framework.
So, i really need advices how to implement this sort of dynamic behavior in the web application.
regars,
antonA lot of what you're seeing are genuine limitations, but happily, JSF is so pluggable that you can overcome them.
JSPs are problematic in exactly the way you describe - unless your app server has support for pulling JSPs out of a database, etc., you're SOL. JSF, however, lets you use something other than JSPs by replacing the ViewHandler. That's a fair bit of work, but it is doable.
For navigation logic, you'd replace the NavigationHandler. As long as you're willing to write the code that can pull navigation rules from an external source, life is good.
For managed beans, all you need to replace is the VariableResolver - again, if you can pull the rules from an external source, you have full control.
This is all far from easy - and it's a huge amount of work for one person - but I'd imagine these pieces will become available from various sources. A core goal of JSF 1.0 was making the framework as a whole pluggable so that others can innovate on top of the framework.
-- Adam Winer (EG member) -
Skipping request for user policy assignments due to agent configuration for authority
Hello all,
Symptoms:
The Configuration Manager only shows the following actions:
Application Deployment Evaluation Cycle
Machine Policy Retrieval & Evaluation Cycle
Software Updates Deployment Evaluation Cycle
User Policy Retrieval & Evaluation Cycle
In Software Center there are no applications visible. Also the default 'IT Organization' is shown instead of the 'real' name.
The Confugration Manager:
shows in the tab 'General' the correct Management point. Connection type is 'currently intranet' (ok)
shows in the tab 'Site' the correct site code.
shows in the tab 'Components' all components as either 'installed' or 'enabled'. Only CCM Notification Agent shows 'Disabled'.
In SCCM 2012 under 'Client Settings' -> 'Default Settings' -> 'Client Policy' the setting 'Enable User policy on clients' has been enabled.
Done so far (without success):
Re-installed the MP
Run a query on the SCCM Database to check if there are any corrupt records. There are not.
Installed version 5.00.7958.1000
CCM Framework: 5.00.7958.1203
The computer is installed with a task sequence. There is a reboot after 'Setup Windows and ConfigMgr (CM2012 R2 CU1)'.
Installation command of the SCCM Client (during OSD deployment):
SMSCACHEFLAGS=PERCENTDISKSPACE SMSCACHESIZE=10 SMSSLP=demo-sccm.demoforest.local SMSMP=demo-sccm.demoforest.local PATCH="%_SMSTSMDataPath%\OSD\TDS00020\KB2938441\configmgr2012ac-r2-kb2938441-i386.msp"
Content log files on the client:
PolicyAgent.log:
Processing PreShutdown event PolicyAgent_RequestAssignments 8/4/2014 11:56:52 PM 2204 (0x089C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/4/2014 11:57:37 PM 2436 (0x0984)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/4/2014 11:57:37 PM 2436 (0x0984)
Registered for MP notifications. PolicyAgent_PostStartup 8/4/2014 11:57:37 PM 2436 (0x0984)
Not rerequesting policy on site code change in provisioning mode. PolicyAgent_ReRequestPolicy 8/5/2014 12:01:55 AM 3212 (0x0C8C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:02:48 AM 2352 (0x0930)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:02:48 AM 2352 (0x0930)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:02:48 AM 2352 (0x0930)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Triggered update of user S-1-5-21-1840543543-1948091412-3654635223-1109 settings PolicyAgent_RequestAssignments 8/5/2014 9:00:57 AM 3232 (0x0CA0)
Requesting User policy assignments for 'S-1-5-21-1840543543-1948091412-3654635223-1109' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Requesting User policy from authority 'SMS:TDS' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Skipping request for user policy assignments due to agent configuration for authority 'SMS:TDS'. PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
ClientIDManagerStartup.log:
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:24:34 AM 372 (0x0174)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SID unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98130500010000EE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Failed to open to WMI namespace '\\.\root\ccmvdi' (8007045b) ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- SHUTDOWN -----] ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:25:42 AM 2012 (0x07DC)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SID unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98C70600010000EE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
ClientAuth.log:
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
ClientLocation.log:
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:53 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:54 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:54 AM 2932 (0x0B74)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Getting Assigned Site ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Assigned Site is TDS ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Getting Assigned Site ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
Assigned Site is TDS ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
execmgr.log (with errors):
Requesting MTC to delete task with id: {C5DCEE82-C903-4CBD-98CC-534646B3EFD7} execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
This execution request does not own the corresponding task in MTC, returning without deleting it from MTC. execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
Service startup. execmgr 4/22/2014 7:16:09 PM 2332 (0x091C)
Service startup. execmgr 4/22/2014 9:17:36 PM 2216 (0x08A8)
Service startup. execmgr 4/22/2014 9:23:02 PM 2348 (0x092C)
Service startup. execmgr 4/22/2014 9:24:53 PM 1000 (0x03E8)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 3224 (0x0C98)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 1292 (0x050C)
Service startup. execmgr 8/4/2014 11:57:32 PM 3696 (0x0E70)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:57:33 PM 3696 (0x0E70)
Software distribution agent was enabled execmgr 8/5/2014 12:01:55 AM 3448 (0x0D78)
Service startup. execmgr 8/5/2014 12:02:44 AM 2272 (0x08E0)
ExecMgr::GetTaskState - GetTaskState Failed with error code 0x87d00317 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
Policy arrived for child program Install execmgr 8/5/2014 12:03:02 AM 1648 (0x0670)
Creating mandatory request for advert TDS20014, program Install, package TDS00014 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
An existing MTC token was supplied, this execution request is not owner of MTC object. execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
CertificateMaintanance.log:
HTTP is selected for Client. The current state is 0. CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140422164904.539000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 604;
CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:7ff40832-4c01-456f-9705-096da67985b3";
DateTime = "20140422164946.336000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 3216;
CertificateMaintenance 4/22/2014 6:49:46 PM 3216 (0x0C90)
HTTP is selected for Client. The current state is 0. CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140804215639.612000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 2212;
CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804215651.440000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 3348;
CertificateMaintenance 8/4/2014 11:56:51 PM 3348 (0x0D14)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/4/2014 11:56:56 PM 1096 (0x0448)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:02:33 AM 1656 (0x0678)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:11:17 AM 384 (0x0180)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:24:34 AM 372 (0x0174)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:25:42 AM 2012 (0x07DC)
smscliui.log:
Perform Action: Request & Evaluate User Policy - {3A88A2F3-0C39-45fa-8959-81F21BF500CE}. Message sent, id={FC736B58-2635-45B8-8002-E7C8D6CCEB8D} smscliui 8/5/2014 9:02:34 AM 2484 (0x09B4)
Current Assigned Site: TDS smscliui 8/5/2014 9:02:38 AM 868 (0x0364)
Currently assigned FQDN: smscliui 8/5/2014 9:02:41 AM 868 (0x0364)
Failed to set DNSSuffix value to the registry. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
SMS Site code has not been changed. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
Current Assigned Site: TDS smscliui 8/5/2014 1:19:20 PM 2160 (0x0870)
CcmMessaging.log:
Queue 'StateMessageManager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'StateMessageManager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CTMDTSReply'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CTMDTSReply' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CTMDTSReply'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'execmgr'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'execmgr' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'execmgr'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_RequestAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_RequestAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_RequestAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ClientRegistration'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ClientRegistration' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ClientRegistration'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'EndpointProtectionAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'EndpointProtectionAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'EndpointProtectionAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'LS_ScheduledCleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'LS_ScheduledCleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'LS_ScheduledCleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_Cleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_Cleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_Cleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'DCMAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'DCMAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'DCMAgent'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CertEnrollAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CertEnrollAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CertEnrollAgent'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ExternalEventAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ExternalEventAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ExternalEventAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'UpdateStore'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'UpdateStore' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'UpdateStore'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_ReplyAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_ReplyAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_ReplyAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'SMSSHA'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'SMSSHA' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'SMSSHA'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'lmp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'lmp_[http]mp_locationmanager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'lmp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_statusreceiver'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_statusreceiver' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_statusreceiver'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_[http]mp_locationmanager' initialized with 1 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.423000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.485000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.563000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.657000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.048000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2508;
CcmMessaging 8/5/2014 1:26:06 AM 2508 (0x09CC)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.110000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2188;
CcmMessaging 8/5/2014 1:26:06 AM 2188 (0x088C)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.188000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:26:06 AM 2504 (0x09C8)
CcmNotificationAgent.log:
Bgb client agent is starting... BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Bgb client agent is disabled BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
TCP Listener is disabled. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
BgbController main thread is started with settings: {bgb enable = 0}, {tcp enabled = 0}, {tcp port = 0} and {http enabled = 0}. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 1:26:05 AM 3076 (0x0C04)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 2:26:05 AM 3076 (0x0C04)
Any help is appreciated and with kind regards,
Willem-JanHello all,
I modified the TS, but the problem is still there.
smsts.log:
==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Executing task sequence OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Debug shell is enabled OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully enabled debug command shell support. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Configuring local administrator account OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Re-assign all drive letters... OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Could not open drive Q:\ (80070005) OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Ignoring inaccessible volume 'Q:' with error 0x80070005 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
No partition needs to be udpated. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Installing SMS client OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Client already installed. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Moving logs to SMS client directory OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully moved logs to SMS client log directory: C:\Windows\CCM\Logs\SMSTSLog OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing task sequence manager bootstrap OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Current OS version is 6.1.7601.1 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Logging successfully initialized. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Resuming Task Sequence in Full OS TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
We are going in GINA and potentially need to set the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
setting the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
==========[ TsProgressUI started in process 2196 ]========== TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Registering COM classes TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
sbModulePath = C:\Windows\CCM\TsProgressUI.exe TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Unregistering class objects TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Shutdown complete. TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Process completed with exit code 0 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully registered TS Progress UI. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Found network adapter "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)" with IP Address 5.5.5.101. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Starting Task Sequence Manager. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager not in full media TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager in c:\windows\ccm TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "TsManager.exe" TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully intialized Logging for TS Manager. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Commandline: "TsManager.exe" TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/service parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/standalone parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/noclient parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Successfully registered Task Sequencing COM Interface. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Executing as a standalone exe TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Initializing TS Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Opening Task Sequencing Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
NOT executing in WinPE TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling Config policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling config policies... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SysHealthConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 684, uncompressed size 4652. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftUpdConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1922, uncompressed size 19242. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftDistClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1327, uncompressed size 13740. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling NAAConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1022, uncompressed size 6494. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling RebootSettingsConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 433, uncompressed size 1556. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling AppManClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 982, uncompressed size 6358. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Get Install Directory for SMS Client TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 435 TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3}") AND (PolicyState
= "Active") AND (PolicyType = "Machine") TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:TDS") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:50 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:51 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 9 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 11943 TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:57 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Total RequestedConfig policy instance(s) : 12387 TSManager 8/5/2014 4:52:00 PM 2244 (0x08C4)
New/Changed ActualConfig policy instance(s) : 0 TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Policy evaluation initiated TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine'
The Powershell command as described by NPerson give the output:
C:\Windows\system32>powershell Invoke-WmiMethod -Namespace root\CCM -Class SMS_C
lient -Name SetClientProvisioningMode -ArgumentList $false
__GENUS : 1
__CLASS : __PARAMETERS
__SUPERCLASS :
__DYNASTY : __PARAMETERS
__RELPATH : __PARAMETERS
__PROPERTY_COUNT : 1
__DERIVATION : {}
__SERVER : DEMO-CAPTURE
__NAMESPACE : ROOT\ccm
__PATH :
\\DEMO-CAPTURE\ROOT\ccm:__PARAMETERS
ReturnValue :
PSComputerName : DEMO-CAPTURE
It is about the PSComputerName: that is the name of the machine on which the capture was made. So I suppose the problem is already in the image. Is my statement correct or is it not relevant?
With kind regards,
Willem-Jan -
Identity Server has not been configured for this new user/group suffix
Hi all
I am having a problem trying to configure the Directory Server (5.2) for Messaging Server.
My configuration is as follows:
SJES Q12005
Server 1 - Directory Server 5.2
Server 1 - Access Manager (formerly Identity Server)
Server 1 - Web Server 6.1
I have successfully installed the above and can login to Access Manager.
I next installed Calendar & Messengar Server on "Server 1". Upon running "comm_dssetup.pl" from /opt/SUNWcomds/sbin, I get the following error:
"Identity Server has not been configured for this new user/group suffix"
Copy and paste of what I entered:
bash-2.05# perl comm_dssetup.pl
Welcome to the Directory Server preparation tool for
Sun Java(tm) System communication services.
(Version 6.3 Revision 1.0)
This tool prepares your directory server for use by the
communications services which include Messaging, Calendar and their components.
The logfile is /var/tmp/dssetup_20050830165940.log.
Do you want to continue [y]:
Please enter the full path to the directory where the Sun ONE
Directory Server was installed.
Directory server root [var/opt/mps/serverroot] : /opt/mps/serverroot
Please select a directory server instance from the following list:
[1] slapd-sunldap
Which instance do you want [1]:
Please enter the directory manager DN [cn=Directory Manager]: cn=DirMan
Password:
Detected DS version 5.2
Will this directory server be used for users/groups [Yes]:
Please enter the Users/Groups base suffix [dc=samplecompany-dev,dc=co,dc=uk] : ou=infrastructure,o=sampletown,dc=samplecompany-dev,dc=co,dc=uk
There are 3 possible schema types:
1 - schema 1 for systems with iMS 5.x data
1.5 - schema 2 compatibility for systems with iMS 5.x data
that has been converted with commdirmig
2 - schema 2 native for systems using Identity Server
Please enter the Schema Type (1, 1.5, 2) [1]: 2
Identity Server has not been configured for this new user/group suffix
You can opt to continue, but you will not be able to use
features that depend on Identity Server
Are you sure you want this schema type? [n]:
I have entered my user group suffix exactly as specified during the Access Manager install (hence I am able to login as "amadmin").
Looking at the LDAP logs to try and figure out whats going wrong I see its not getting hits on all searches it is performing:
[30/Aug/2005:16:41:18 +0100] conn=299 op=159 msgId=161 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(obj
ectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscape
Resource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=159 msgId=161 - RESULT err=4 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=160 msgId=162 - ABANDON targetop=NOTFOUND msgid=161
[30/Aug/2005:16:41:18 +0100] conn=299 op=161 msgId=163 - SRCH base="ou=people,ou=infrastructure,o=northampton,dc=dataforce-de
v,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(objec
tClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscapeRe
source)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=161 msgId=163 - RESULT err=0 tag=101 nentries=0 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=162 msgId=164 - SRCH base="ou=clientdata,ou=infrastructure,o=northampton,dc=dataforc
e-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(o
bjectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netsca
peResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=162 msgId=164 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=163 msgId=165 - ABANDON targetop=NOTFOUND msgid=164
[30/Aug/2005:16:41:20 +0100] conn=299 op=164 msgId=166 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:20 +0100] conn=299 op=164 msgId=166 - RESULT err=0 tag=101 nentries=41 etime=0
[30/Aug/2005:16:41:28 +0100] conn=299 op=165 msgId=167 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:28 +0100] conn=299 op=165 msgId=167 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:28 +0100] conn=299 op=166 msgId=168 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(obj
ectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscape
Resource)(objectClass=domain))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:29 +0100] conn=299 op=166 msgId=168 - RESULT err=0 tag=101 nentries=41 etime=1
[30/Aug/2005:16:41:29 +0100] conn=299 op=167 msgId=169 - SRCH base="ou=iplanetamauthservice,ou=services,ou=infrastructure,o=n
orthampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectC
lass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServ
er)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=167 msgId=169 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=168 msgId=170 - ABANDON targetop=NOTFOUND msgid=169
[30/Aug/2005:16:41:29 +0100] conn=299 op=169 msgId=171 - SRCH base="ou=iplanetamauthldapservice,ou=services,ou=infrastructure
,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(obj
ectClass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscape
Server)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=169 msgId=171 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=170 msgId=172 - ABANDON targetop=NOTFOUND msgid=171
[30/Aug/2005:16:41:29 +0100] conn=299 op=171 msgId=173 - SRCH base="ou=iplanetampolicyconfigservice,ou=services,ou=infrastruc
ture,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)
(objectClass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=nets
capeServer)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=171 msgId=173 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=172 msgId=174 - ABANDON targetop=NOTFOUND msgid=173
[30/Aug/2005:16:41:29 +0100] conn=299 op=173 msgId=175 - SRCH base="ou=iplanetamauthenticationdomainconfigservice,ou=services
,ou=infrastructure,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(
--More--(83%)
The list goes on.
Can anyone give me any pointers?
ThanksHi
Thanks for your reply!
I did mis-type, my mistake - sorry about that.
If I dont over-ride the default it works, I've pretty much got the whole setup working now but I'm not particularly over the moon about the way the ldap tree is setup, I'd like finer granuality as we are going to attempt to get syncronization working with AD.
I have an idea about how I'd like to set up our Mail/Calendar/LDAP infrastructure the 2nd time around (I'm just testing at the mo) - so I might have a question or two for you if you dont mind taking a look when you have a minute?
Thanks Jay -
How to transport FM retraction configuration if source-system changes?
Hi experts,
I have configured FM retraction in ERP through SPRO connecting it to my Dev source system in my Dev ERP. What do I need to do to transport this configuration to my production ERP and make sure the BI source-system changes from Dev to Prod as well? Is there some kind of souce-system mapping as there is in the BI side for the extraction?
For example, I have everything set-up for source-system BWD and I want it to change to BWP when I transport the configuration from ERP dev to ERP prod.
Thanks
Edited by: Pedro Fontes Pais on Dec 2, 2008 6:36 PMHi Christian,
Thanks for your reply, but I didn't get anywhere in OKE7 & OKE8 to include the credit records I made in KSAZ in a Transport.
Can you elaborate it more.
Thanks
Amit Goyal -
How to configure BAPI Source system in BW3.0B
Hi all,
I am using BW 3.0B, i am extracting CSV file from website and want to load its data into infocube for analysis, the problem is for this i need to configure BAPI source system and then i can use DBConnect functionality to get data from CSV,
please inform me how this is possible.
Thanks in advance.Hi,
please read:
http://help.sap.com/saphelp_nw04/helpdata/en/50/63d6b37bda7f4a92e2dec21b14ceee/content.htm
regards
michael
Maybe you are looking for
-
Why does my HP LaserJet 4 Plus put out blank page after print page?
why does my laser Jet 4 Plus put out a blank sheet after every print page
-
How to move some components in JFileChoose interface?
Hi, there, I am implementing a GUI including onw area that will display file contents in some directory, I need to display column names(file name, size, modified), in file name column, I would like to display different icon to show it is a directory
-
Hyperlink not working in iframe
ive created a hyperlink in one of my iframes, ive made sure its on top of every layer. it works in iweb, but after ive published it, it doesnt seem to work. www.milkysyndication.com is the site, on my news page, the latest entry has a click here. its
-
MBP Airport problems fixed by 10.4.7
Just wanted to say I was having terrible wifi dropout problems with my month-old 15" MacBook Pro -- it would work fine for a few minutes, then go dead for 20-30 seconds, though it still claimed to be connected -- and installing the 10.4.7 update seem
-
Multi-Lang support and slides issue
First, is anyone here using slides-based Flash documents at all? Whenever I post my (IMHO well-researched) questions/reports, like the one linked to below, I never get an answer. By now I'm ready to give up completely on slide-based documents and rea