DNS error - "requires at least one Nameserver"

Hi,
I have a working Snow Leopard 10.6.8 server - working in all respects except DNS.
I decided to take the advice of posters on this site and turn off dns and re-enter it from scratch.
I was able to delete all of the settings on the Zones tab, EXCEPT for the primary zone.
When I delete it it just re-appears by itself !
I then try to enter the data that is correct for the name server by clicking the + button under Nameservers.
When I enter the correct data and click OK, it says "Some configuration data is invalid: The zone..... requires at least one Nameserver" !
Well... I'm trying to enter exactly that!
Anyone have any clues how to fix this?

I saw similar behavior recently on one server I was working on. (This was with the 10.6.7 and associated server tools; haven't been down this path with 10.6.8 and the updated server tools.)
If what I saw is similar to what you're seeing here, then try this...
First, if you don't have a recent backup copy of your boot disk that you trust and are willing to use, then back up your boot disk before you proceed by booting a distribution disk and using Disk Utility to make a full copy of your boot disk to external storage. This backup is your path back to operations if Badness Happens.
Once you have rebooted your system from your backup, stop DNS services and exit Server Admin, if either or both are running.
Then launch Terminal.app, and navigate into and delete or rename the Server Admin properties list file:
~/Library/Preferences/com.apple.ServerAdmin.plist
Then relaunch Server Admin, and you should be able to fix your DNS services.
This is your local copy of the preferences file for Server Admin, not a system-wide preferences.
The "immutable" DNS settings were (after digging around) being recovered from the plist file. (I've also had rare occasion to edit that plist file, when things go Really Wonky, and to change the immutable settings to some other temporary domain name, which then let me Get On With It All with the intended domain name.)

Similar Messages

Exception : DI Error: (-5002) At least one amount is required in document rows

Trying to create a MaterialRevaulation object. doesn't matter what I am using I can getting this error message "Exception : DI Error: (-5002) At least one amount is required in document rows"
Formate of payload looks like
<Payload Role="X" id="atom1">
- <MaterialRevaluation xmlns="">
- <row>
<RevalType>P</RevalType>
<DocDate>20140701</DocDate>
<JournalMemo>Inventory Revaluation</JournalMemo>
<InflationRevaluation>tNO</InflationRevaluation>
</row>
</MaterialRevaluation>
- <MaterialRevulation_Lines xmlns="">
- <row>
<LineNum>0</LineNum>
<ItemCode>Item1</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>14.973030</Price>
</row>
- <row>
<LineNum>1</LineNum>
<ItemCode>Item2</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>15.973030</Price>
</row>
- <row>
<LineNum>2</LineNum>
<ItemCode>Item3</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>13.973030</Price>
</row>
</MaterialRevulation_Lines>
</Payload>
And my SBO object call looks like this
<Payload Role="C" id="atom2" system="0010000102" status="success" b1login="Technical User" method="Synchronous Insert with fallback to Update" objectid="162" payload="atom1" keyname="" keyvalue="" DIresult="failure" DImsg="Exception : DI Error: (-5002) At least one amount is required in document rows" />
I don't think I need to put anything in KeyName or Keyvalue. Since I am insert.
But it looks like it is not even look at the XML changes. I have tried to with no change
1. Add BOM/BO admin structure
2. Rouding price difference (from 0 decimla ot 6)
3. Put in Quantity
4. Add LineNum
5.Change Item
6.Change WHS
Running out of ideas!! Any help will be appreciated. Thank You!

Successful format looks like this
Strange enough, and I still don't know why. Certain item in combination give me the error message. If I break it out to individual document. Then it give me the proper error message. But if it bundled with number of item together then it become this at least one amount is needed at document row error message.
<BOM xmlns="">
<BO>
<AdmInfo>
<Object>162</Object>
<Version>2</Version>
</AdmInfo>
<MaterialRevaluation>
<row>
<DocDate>20140702</DocDate>
<RevalType>P</RevalType>
</row>
</MaterialRevaluation>
<MaterialRevaluation_lines>
<row>
<ItemCode>ITEM1</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>14.587</Price>
</row>
</MaterialRevaluation_lines>
</BO>
</BOM>

Build - Generates an "NTSC DVD requires at least one AC3 or PCM Audio track"

I'm using the trial version to make my first DVD with Encore. All went fairly smoothly until I went to "build" the DVD and received the "NTSC DVD requires at least one AC3 or PCM Audio track..." message. I continued with the build and tested the DVD. All the audio was fine except for audio assigned to my menus via the audio section, assigned from the motion tab, was not heard on the DVD. The Menu audio did however sound good from the preview mode. The audio that I tried to use in the motion audio field, was from a M2P file from the same clip that worked fine on the DVD. The video field was not set to anything on the motion menu.
My questions are: 1) How do I clear the error? 2) How do I get the Audio on my menus?
(Not sure if this item belonged in the forum, the error forum, or the audio forum - Sorry).
I don't even know for a fact that the error message was tied directly to the menu. I'm sure its something basic that I just missed - Thanks.
Eric

Thanks you very much, now I will be able to sleep tonight. My editing system (Edius) had both the ability to export my sound track to PCM AIFF & PCM WAVE, which worked great for the sound on the menus, as well as an elementary stream (M2V) format which worked good for the main sound track. I looked in the Audio Forum to find out about the elementary streams. The end result is that my DVD build error cleared as well as getting audio on the menu.
Once again, thank you both for your help.

Report framework requires at least one grouped column

A Report requires at least one grouped column, otherwise finish button will lead to "The report doesn't contain grouped columns".
Is it possible to configure a report not to require grouping?

Oliver-2012 wrote:
I created a new report (Page Activity Report) from the Tools/Reports console. I added two columns (Page and Type) and tried to click on "Finish" -> error as described.
Then I created my own report (copied from libs/cq/reporting/components/auditreport) with custom columns (Path, Title, and some more). The report displays the columns, but click on finish results in the same error, too.
Is there any special property I have to set in the configurations/Nodes of the report?
I'm beginning to suspect you're not talking about ColdFusion reports, right?
This sub-forum is about creating reports for ColdFusion.
If you are indeed creating a report for ColdFusion, but you're using a third-party report writer, please identify the report writer so that people who have experience with it will be able to help you.
Sorry for the confusion.

Purchase Order Response Error : "Enter at least one item"

Hi there,
While trying to confirm a PO response in SRM 7 I am getting the following error:
"Enter at least one item"
But when I do a check on the PO response it says:
Purchase order response - 0030000035 is correct
Any ideas what could cause this error?
Thanks for the help
Lynton

Hi there,
I have no idea what you are asking with the limit po?
Lynton

Error log 'At least one entry could not be found in object buffer' in SLG1

Hi Experts,
We are getting error log 'At least one entry could not be found in object buffer' in SLG1 transaction.
Unable to trace the source of error. Could you please help us identifying the same.
Regards,
Santosh Kacham

Hello,
the reason could be the use of order_save badi, mostly there is a wrong + faulty implementation which causes this error. Please check first if any own coding part is involved, when creating documents / tickets.
Thanks + regarsd
Rene

Require at least one checkbox?

I have a form which dynamically spits out my users so they
can be assigned to a project. How can I require at least one of the
checkboxes that it spits out or is their a better method to my
madness?

quote:
Originally posted by:
mikeap
I have a form which dynamically spits out my users so they
can be assigned to a project. How can I require at least one of the
checkboxes that it spits out or is their a better method to my
madness?
Instead of check boxes use radio buttons or a select.

Error: Select at least one user or group for provisioning

Hi all,
In Hypeion shared services, I haved choosen User for provision but it show error "Select at least one user or group for provisioning". I don't know why, plx help me.
Thanks.

When you say you have chosen a user, did you highlight the user in the left box then click the arrow to move that user to the right box?
What step are you at? What system and what version are you on?
Are you selecting a user to provision roles? Are you selecting users in an application to provision security classes?

SC Template error: "Enter at least one item or one limit"

Hi,
When creating a Purchase Order,based in a Shopping Cart Template, when we add the item to the Purchase Order, we are getting this error that does not permit to continue:"Enter at least one item or one limit". This error looks a mistake, as we are only trying to transfer an item.
Sounds familiar?
We are using SRM v5.0.
Thanks,
Maria

Issue solved with the following Notes Implementation:
Notes: 1054481; 1054487; 1179589 ; 1381642 and 1435295

DNS Errors (Event 4015) on one DC when I reboot the other

I have two Server 2012 Domain Controllers. Each has DNS and DHCP with failover. The NIC properties of each server have the primary DNS pointing to the other server and the secondary DNS pointing to itself (127.0.0.1).
DC1 holds the
Schema Master, Domain Naming Master, PDC Master, RID Pool Manager and Infrastructure Master roles. Both DCs are Global Catalogs.
When I reboot or turn off DC1, DC2 logs an error 4015...
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
...every second.
Does anyone know how to fix this?

Well, it makes sense that it should point to it self, as it is always available. If you point to a another dns as primiary, dns request will slow down as long as that dns server is down. I believe you've set up both dns's to forward any non resolveable
requests?
For the FSMO roles, you can always move them if you have a scheduled downtime.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.
Yes, both DNS's are set to forward non-resolvable requests. I just ran the Best Practices Analyzer on DC1 and it gave me several warning but one of them is not correct. It says...
Error DNS: DNS servers on Ethernet should include the loopback address, but not as the first entry.
Problem: The network adaptor Ethernet does not list the local server as a DNS server; or it is configured as the first DNS server on this adaptor.
I am including the loopback address and it is not the first entry. I don't know why it misidentified this.
EDIT: I think it must be seeing the IPV6 address. If I do an ipconfig /all, the first entry in the DNS server list is...
::1
10.1.3.4
127.0.0.1
Can I set it so that the IPV4 addresses are first in the priority?

Does recording audio require at least one video track?

I needed to record audio while shooting a video and didn't have my handy Zoom with me. I thought to instead set up Premiere to capture the audio.
I created a new, blank project, added a mono audio track, plugged a mic into my audio interface, enabled the mono track for recording in the audio track mixer, chose the input channel, clicked the record button, saw the meters bouncing - all well, right?
Well when I hit "play" - nothing. That is, not until I dragged some black video into the timeline. Then - it worked.
This is not how the workflow is documented in Adobe's "Help and Tutorials" manual.
It should be updated at some point - or this is a bug.

hey tom
this can be done with or without scripts.
you say that you have a menu alreay with the different audio options, correct?
if you do, you would lay all your audio tracks onto its appropriate stream (A1, A2, A3).
then you go to your menu and set up the menu like you would any (create the menu name, drag a selector box to correspond to the highlighted button, etc.)
one this is accomplished, click on the button associated with audio track 1 (A1) and look at your inspector. click on the advance tab and you will see options for setting the streams angles, audio (this is the one you want) and subtitle. click on the dropdown box, and select A1.
then click on the on the menu button associated with A2 and look at your inspector again under the advance tab and you will see it reset itself, now again click on the doprdown menu and now associate that stream with A2.
do the same for the A3.
once you are done, verify the setting with clicking on the first menu button associated with A1 and you will see under the inspectors advance button that Audio stream 1 will be saved. your golden form there!
scripting the bad boy is a little more involved. there is an an article out there that goes through it with great detail.. do a forum search for "scripting audio stream" and you will find it.
goodluck
Mikey

Background job getting cancelled : Choose at least one scope of list

Hello to all,
I am trying to Run on Z report in background which conatins SUBMIT statement to standard progarm for MB5B .This report already programmed to call a report in background.It takes stocks for given period,I am taking the values using "import memory-id" statement.It gives an error log in SM37 as:
Choose at least one scope of list
Message no. M7829
Can we call a submit stmt in a report that is to run in background?? or pls provide any alternative for this problem??
Thnax & Regards
Sonal

Hi Sonal,
1. This is happening because there are some checkboxes on the selection screen
   which are ticked by default when we run in fore ground
   and are blank when run in background.
Hence the system gives the error meaning to select atleast one of them.
2. We can simulate this error in foreground also.
   There is one button on selection screen in the middle frame.
   "> Category"
   Just push it.
   Some checkboxes will appear now.
   Untick all of them and run the report. You will get the same error
Choose at least one scope of list
3. So while doing SUBMIT in the z report, you can pass the values of those checkboxes (which ever you require) as 'X'.
eg.
report abc.
submit RM07MLBD
with matnr = '3'
with pa_wdzer = 'X'.
4. The checkboxes field names are:
PARAMETERS : pa_wdzer    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdzew    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdwiz    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdwuw    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdwew    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_ndzer    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_ndsto    LIKE AM07M-MB5B_XONUL
                          modif id liu.
regards,
amit m.

How can I have multiple-selection list box "select at least one checkbox" option active only when the section it's in is visible?

Hi, I'm using SP13 and InfoPath2013.
I created a custom form and published it to SP13 document library. This form has many MSLB. Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show. Each MSLB is in its own section. The requirement
is to have each MSLB to have at least one checkbox selected. Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected. However, the form can't get submitted instead
an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed. Is there any way to fix this besides unchecking all MSLB to be not required at least one selection? Thank you.

Eric,
I follow your reply post here and still doesn't work. I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.
Here is what I did,
1.Check At least one selection required for
these Multiple-selection List Boxes
as you want .
2.Create a Formatting rule for the 2nd
Multiple-selection List Box.
3.Add a Condition as below:
4. I get a validation error if I don't
select at least one checkbox in the hidden MSLB control when submitting.
I think I'm following all the steps correctly
but please let me know if I'm not.

At least one certficate has expaired

HI experts,
i have installed NetWeaver 2004s server and when i try to start the J2ee instance
server0 process is never come up and it is giving exit code -1 in the alrests i am
getting an error message ' at least one certficate has expaired'
what could be reason.
any suggestion wiuld be appriciated
With Regards
Shobhan

just create a summary column (and a formula column that returns 1 or 0 or define you checkbox to be 1- checked, else - 0).
regards

"Assign at least one Web transaction to user" in OER

When i call the /SAPTRX/EM_START , i get an error "Assign at least one Web transaction to user"
what is the problem?I dont know how to assign it
Thanks

Once the above is done:
In the same spro sub menu choose
Assign User Profiles and Web Interface Transactions to users:
Use the input help to assign the transactions and profiles to a user, depending on the process that you want the user to perform.
Eg.
Process: Delivery Tracking
Web Interface transaction: PTA10_DELIV
User Profile: PTA10_DELIV
Order Web : 1,2,3etc
I think this should solve your problem

DNS error - "requires at least one Nameserver"

Similar Messages

Maybe you are looking for