Do HP offer an A3 printer on the instant ink initiative ?

Looking to purchase an A3 printer, and wondered if HP did one that can use instant ink ?

Hey @sewell001,
Welcome to the HP Support Forum!  I understand you're looking into purchasing an Instant Ink compatible printer.  I can provide you with  the full list of Instant Ink compatible printers. 
Just to clarify, what do you mean by A3?  Are you referring to 'All-in-One' printer capabilities or A3 paper size? 
Here's the full list of eligible printers:  
HP ENVY 4500 Series
HP ENVY 5530 Series
HP ENVY 5640 Series
HP ENVY 5660 Series
HP ENVY 7640 Series
HP Officejet 4630 Series
HP Officejet 5740 Series
HP Officejet 6810 Series
HP Officejet 6820 Series
HP Officejet 8040 Series
HP Officejet Pro 6830 Series
HP Officejet Pro 8610 Series
HP Officejet Pro 8620 Series
HP Officejet Pro 8630 Series
Source
If you have further questions about the Instant Ink service please call our Cloud Services at 855-785-2777.  If you live outside the US/Canada Region, please click the link below to get the support number for your region. 
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great day! 
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Similar Messages

  • Please Include Puerto Rico on the Instant Ink Program

    Hello,
    I will like to suggest you guys to add Puerto Rico to the Instant Ink Program. I use my printer alot and I use alot of ink and the ink is a little expensive.
    Thanks
    This question was solved.
    View Solution.

    Hello @bsanchez12, 
    Welcome to the HP forums.
    I understand that you would like to see Instant Ink come to Puerto Rico.
    Like you mentioned, while it is not currently available, please keep checking the Instant Ink page periodically for updates.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • When printing grey scale on a MX882 printer, is the color ink used at all?

    We set all of our home PCs to print gray scale on our printer, an MX882 (serial # ACAT48275) in order to not use so much color ink.  That seemed to be working very well until the big black ink cartridge (the 226BK) emptied out.  I didn't think anything of it because the small 225 BK cartridge was still full.    The 225 BK is about 1/2 full now, but all of a sudden, the color inks (226C and 226M) are empty, with the 226Y 1/2 empty.
    My question is, if the BIG black cartridge (226BK) empties, does it not "switch over" to the 225 BK?  Or does is start "creating" black by using both magenta and cyan?
    Thanks.
    Mark

    Hello.
    If plain, letter sized paper is used, the printer should use the large black tank for grayscale printing.  If specialty paper or duplex printing is used, the printer would use the dye based inks.    If grayscale printing is not enabled, the printer may create 'composite' blacks by using mixtures of the color inks.  This may occur when graphic or web-based printouts are performed.
    The reason for the two different black ink tanks is for the different types of printing your unit is able to perform.  They are not intended as backups to each other.  The larger black tank is pigment based, and is primarily used for standard black text printing or output.  The smaller black ink tank is dye based like the color inks, and is used for photo and graphics output. 
    If additional assistance is needed, feel free to call us at 1-800-OKCANON.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • MY photosmart B 210 is not printing with the black ink at all. Pages are coming out blank

    Print report says ink is low in the colours but they do appear on the sheet but no black ink at all
    It is a relatively new cartridge and genuine HP ink. Stopped suddenly
    Pages from print or copy are coming out blank.
    Tried  to clean print heads and it says
    Print System Failure : Oxc19a0003
    and tells me to switch printer off and back on which I have now tried but getting the same message!
    What does this mean?

    Hi @BrendaMC,
    Welcome to the HP Forums!
    I noticed that your HP Photosmart B210 printer is not printing black ink, and that the pages are coming out blank. I am sorry to hear this, but happy to help!
    I would suggest to go through the following guides:
    Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart Plus e-All-in....
    'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M.... 
    Ink Usage in Inkjet Printers.
    Hope these guides are helpful, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Photosmart 7510 not printing photo ink when it should, but using up all the other ink cartridges​.

    I'm printing photos, mostly black and white, and all my regular cartridges are almost depleted when I thought they were printing from the photo ink cartridge.  I want the photo ink cartridge to be used and it still shows full.  I had to run out and get new cartridges which is becoming expensive.
    I have windows 7 and I use the Windows Photo Viewer to print the photos.
    I need steps in how to set my printer properties so that the photo ink cartridge is used.
    As of now, the way I look at it, it would be less expensive to go to Wal-Mart or a local grocery store and print my photos there.
    Thank you.

    Hi,
    Photo ink is actually black and under normal printing (including printing photos) it can last 3 times longer than other inks.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I turn of the "Connect printer to update HP Instant Ink status" message?

    I initially signed up for the HP Connected program but had to discontinue when I lost my internet connection. The Wi-Fi still works. I replaced my Instant Ink cartridges with the appropriate new non-Instant Ink HP ink cartriges. The printer works, but before each job prints I have to walk over to the printer the touch screen and depress the "OK" button to remove a warning message which state: "Connect printer to update HP Instant Ink status." How do I turn off this message so that I can print without having to respond each and every time? In addition to replacing the original Instant Ink cartridges, I have done "hard" printer restarts (with off and on switch),  tried restoring the factory settings via the touch screen system settings, turned off the internet connectivity and turned off all the Alert Settings in the HP Utility. Help!

    Hello , Welcome to the HP Forums, and thanks so much for posting!  I'd like to help you with the message you are getting on your HP officejet Pro 8620 e-All-in-One printer to connect to the Instant Ink server.  What it sounds like, is that there have been pages printed since the printer last connected to the HP Instant Ink server. If you cancelled your account AFTER the printer's last connection to the internet, the printer would have no idea that the account has been cancelled. I'd recommend contacting our Cloud Services support at 1-855-785-2777 for further assistance. Hope this helps!

  • A3 Printer to use with instant ink

    Hi,
    I'm looking at the HP instant ink scheme, but would like an A3 printer to use.
    Can you tell me if HP offer an A3 printer that can be used with the instant ink scheme.
    Thanks

    There are currently no printers that support A3 paper for Instant Ink.  You can see the list of printers in the document here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • C5380 - I want to print using ONLY black ink cartridge. Is this possible?

    Hi Folks,
    I now understand that this model, HP C5380 and I'm guessing many others too, are programed to use an amount of colour ink even when selected to print in Black. 
    My question is:  Can I somehow program the printer to 'only print using the black ink cartridge' and not use the colour cartridges at all?
    I have heard that this is possible with some models but need the specifics.
    I am even willing to permanently disable the colour function if needed. The replacement ink catridges are so very expensive, if I'm unable to do this then I'll be looking for another printer and it won't be HP.  Thi is unfortunate because I think they make a good quality product - however they need to be on notice that their customers 'good will' and return business will not be forthcoming when they (and other compaines) continue to use money making strategies like this. 
    Many Thanks in advance for your time, B

    Hi berni7 ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Instant ink problem cannot print

    Instant Ink Problem cannot print is the error I'm getting with my officejet 4630. It was working fine until now. I have enrolled in the instant ink program. My problem now is somehow my printer is not showing up on my account. it tells me to add a device. Fine, but when I try to add it wants a claim code which I have already used so there is no claim code to print. I couldn't print it anyways for the error " instant ink problem cannot print shows up. How do I add a device now???

    Hi Gertiee,
    Welcome to the HP Support forums.  I see that you are unable to print using your HP printer.
    Try removing and re-enabling Web Services from your printer’s control panel. Check your printer’s control panel for the Setup or Web icon, and then follow the appropriate instructions to enable Web Services. The steps to remove/enable Web Services vary by HP printer model. For your model:
    HP Officejet Removing Web Services:  Use Setup > Web Services Setup > Restore Factory Settings to remove Web Services from the printer. 
    Then re-enable web services on your printer.  If the web services info sheet does not automatically print within a few minutes of re-enabling web services, web services has not been fully enabled on your printer.   You may need to wait and remove and re-enable web services again in few hours to allow the issues affecting your printer’s communication with the cloud servers to clear up.  Until a web services info sheet prints out your web services registration is not complete.   Complete the steps below while your printer is connected to the Internet.
    Officejet Enable Web Services: 
    On the printer control panel, touch the Apps icon, touchYes to enable Web Services, touch Yes to Accept Terms of Service, and then touch Yes again for automatic firmware updates. An information sheet prints that has your printer claim code.
    On the printer control panel, press theePrint  button or icon to open the Web Services 
    Either select Yes to enable Web Services, select Yes again for automatic updates, and then press the ePrint button again. Or, select Enable Web Services , and then select OK . An information sheet prints that has your printer claim code.
    On the printer control panel, touchSetup, and then touch Web Services.
    Select Enable Web Services , and then select OK . An information sheet prints that has your printer claim code.
    If it continues to not print, see the Web Services connectivity troubleshooting here.
    If you need to reach an HP Instant Ink support person, please contact 1-855-785-2777. Hours are: Monday through Friday 8:00am to 11:00pm / Saturday 9:00am to 8:00pm Eastern time.
    Thank you,
    KAB_11
    Although I work on behalf of HP, I am speaking for myself and not for HP.
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution. Please click on the Thumbs Up on the right to say “Thanks” for helping!

  • What 3rd party companies are there that offer a photo printing service for ipad2 users? I suppose I am looking for a similar service to iPhoto on the MacBook pro but so far I've had no joy. I'm uk based.

    What 3rd party companies are there that offer a photo printing service for ipad2 users? I suppose I am looking for a similar service to iPhoto on the MacBook pro but so far I've had no joy. I'm uk based.

    Are these the kind of thing you're looking for:
    http://itunes.apple.com/us/app/lifepics/id323705153?mt=8
    http://itunes.apple.com/us/app/walgreens-for-ipad/id430444027?mt=8
    Matt

  • I cannot print wirelessly to Canon PIXMA 560 using Airport Extreme and Vista PC.  Printer worked fine with Netgear previously.  With USB from printer direct to Laptop it will print.  The printer is definitely set up correctly to acknowledge the router.  W

    When I connect the printer to the Airport via USB and run Bonjour, it recognizes that I have a Canon printer but does not have the mp560 as one of the choices.
    I spoke with Apple support but they could not help...they said they thought it was a Windows issue and that it had something to do with one of the ports needing to get "unstuck" or something like that...this is really annoying because while the Airport is so much better than the Netgear it defeats the purpose of having the wireless printer, which worked so well previously.
    Can anyone offer advice?  Thanks.

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • Macbook will not connect to printer via the network

    I have my G5 computer connected to my home network airport extreme with an ethernet cable. I have a new Canon MX 860 (which will work over a network) which is also connected to the airport extreme with an ethernet cable (wired lan connection). The G5 and the Canon work well together; printing and scanning etc.
    I have a Macbook that will not connect to the Canon via the network. I have checked and rechecked the setup and am stumped. I get various failure notices:
    "The "Canon..." printer could not be found in your list of printers" (altho it is listed)
    "Unable to get printer status (forbidden)"
    "Status: In use, Default" (altho the printer is ready and not in use)
    "Operation could not be completed -client-error-not-possible"
    Both computers are setup for printer sharing and the printer list allows the Canon to be shared.
    The network works well supporting Macbook and several Tivos.
    Any help on what I should try next?
    Thanks for any suggestions
    John

    Hello John,
    For starters, you don't need printer sharing enabled. Since the MX860 is connected to the extreme via Ethernet, then the MacBook should be able to connect directly to the MX860 via wireless or wired.
    For either type of connection, you need to add the printer via More Printers > Canon IJ Network. You should not connect via the Default browser view, as this will only show the shared printer via the G5 (which you should disable). In fact, based on the errors you are getting, it does sound like you have added the printer by selecting the shared offering.
    So I would delete the current printer queue and add again, using the More Printers > Canon IJ Network menu. This window should show the MX860 with its MAC address in brackets. When you select it and press Add, the printer will be created with a name something like 'Canon MX860 series (00.00.85.xx.xx.xx)'.
    If the printing still fails with the printed added as above, then please reply.
    PaHu

  • How to make a subform not print if the fields are empty

    I'm once again working on that kind of client form where our agents fill in a bunch of fields on our forms and I only want those fields that are pertinent to that client to print out and I've grouped the fields that go together into separate subforms.
    There are date fields and currency fields that relayout to floating fields in hidden blocks of text that appear when the last text field is exited, ie:
    Subform1  "On 5/14/12 your application was approved. We will pay $100 to your account"
    Subform2  "On 5/14/12 we received your application. We will need further information before you claim for $250 can be approved" etc. Obviously, both of these subforms cannot appear on the letter.
    Jono gave me a great solution for not printing checkboxes that are not checked with a preprint script which worked perfectly and I tried to adapt that to the subforms but alas my skills are lacking. I tried just putting it in each fill in field but then the blocks of text still remained.
    So basically I don't want the subforms that have empty fields to print.
    I'd appreciate any help that can be offered.

    Hi,
    I think that the logic/script should be placed in the area where the user either approves or rejects the claim. This would avoid a prePrint script to check if fields are empty or not.
    If you are stuck with checking if fields are empty on prePrint, then you would just need to check the relevant fields one at a time or use a loop.
    Hope that helps,
    Niall

  • HT4356 When printing from the iPad how to control how many pages of the document to print?

    When printing from the iPad, how to control how. Any pages of the document to print?

    You got me curious (even though I've never used coupons.com, and I have an AirPrint printer).  So I checked out coupons.com in the iTunes Store and found the following two reviews that I think explain everything:
    Based on the above, my conclusion is coupons.com is set up to print on wireless HP printers from an iPad.  You could print to a non-AirPrint HP printer as well using an app from the iTunes Store.  But the non-AirPrint printers do offer considerably less compatibility with Apple's iPad applications than the AirPrint ones do.  For example, in the Epson case, non-AirPrint Epsons can print from Safari but not from email.

  • CS6 Photoshop: One newly-created PSD filewon't print because the print dialog box won't appear altho the file properties appear to be the same as other files that do print.

    CS6 Photoshop: One newly-created PSD file won't print because the print dialog box won't appear after selecting File > Print.  Then "Print" becomes grayed out. The file properties such as permissions, are the same as other PSD files that do print.  This file also cannot be converted to Adobe PDF, which is not offered as choice under "Save as", whereas other can be.  I've exited, reopened Photoshop, restarted computer, checked out other CS6 PSD files which do print, nothing changes.  The 52 MB file has been flattened. OS is Windows 7.  Thanks for any suggestions.

    Sounds like the printer driver is having some problems.
    Try holding the space bar down when you select Print (which makes the print dialog NOT load previously used settings).

Maybe you are looking for