Do i need to create dimensions on mp using only ods?

hi all,
Do i need to create dimensions for multi provider where in all my info providers are only from ods?
thanxs
haritha

Hello Haritha
Please have a look on following case
create MP and assign Inbfocube..whatever dimensions are there in cube will be assigned to MP and it will be using the same dmensions as cube while reading dat afor reporting;
Now if you add an ODS, ODS don't have dimensions so no extra dimension will be added to MP but if you feel that some ODS characteristic are there which u can place in existing dimension than you can create extra dimension and assign ODS characteristic in that...
Dimensioning always improves performence so use maximun dimensions...if characeristic are differenr from one another..
Thanks
Tripple k

Similar Messages

I need to create .pst ext . file using java,whi will import in ms outlook

{color:#ff0000}*I need to create .PST extension file using java which will be able to import in ms outlook,and that .pst file will contain root folder (like Personal Folders) and inbox,sent mail*{color}
give me some hint It is essential task .we have to implement code in java

I'm using the thin drivers.
The answer to your question is no, you do not need to create a DSN to connect to Oracle. The Oracle thin driver is all that is required. Your code looks OK to me, I'm assuming that you xxx'd out the IP, and that you are using a real IP in the actual code.
The message you got back is pretty generic, but can indicate that the Oracle database listener isn't available. Perhaps the database is on a different port, or perhaps the listerner isn't running. Perhaps you have the IP address wrong.
So, to be very basic:
1) Can you ping the server you are trying to connect to? This makes sure you are using a valid IP address.
2) Can you connect to the Oracle server from an Oracle client? This makes sure the listener is running properly, and that you know the correct port number and login information (The port number could be in a local or server based TNS file, or available through an Oracle names server. You might try using the program tnsping if it is available on the client for validation.
3) If you can do 1 and 2, then be sure you are using the same connection parameters (server, port userid and password) that worked with 2.
4) Verify that you are using (pointing to) the correct set of Oracle classes for the thin connection. This can be tricky if you have different versions of Oracle on the client then on the server, but is documented on the Oracle website.
5) If everything checks out, you might want to verify that you are using the most recent versions of the thin drivers, including the Oracle patches.
Hope it helps - good luck,
Joel

I wanted to send some photos out but was told I need to create a new profile, use mail icon in control panel no icon there how do I get it done?

I want to send some photos from Firefox, when I tried it said I need to create a new profile, use mail icon in control panel. I went to control panel and do not know what to do.'''bold text'''

As all of the msuic came from your computer in the first place it should still be there. Is it not?
EVERYTHING on your ipod should also be on your computer and should be included in your regular backup copy of your computer.
Make sure that everything is on your computer. You can transfer itunes purchases from the ipod. Without syncing: File>Transfer Purchases.
When everything is on your computer, then it can be synced back to the ipod after updating.

I need to create a iTunes account using my work email but...

I need to create a iTunes account using my work email address but when I try it says that there is already an iTunes account linked to my work email - I have never done this so I know that I have not created this and therefore can't answer the security questions in order to check it out. It also means I can't set up this iTunes account - any ideas?

When Apple increased security on the accounts we were asked to create security questions and answers and to offer a rescue email address, could you have used the work address then?
http://support.apple.com/kb/HT5312

New to applescript. need to create a plist file using applescript

Needed some help I need on creatinga plist file below using applescript and I can't make it happen needed some hand on this.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Username</key>
<string>${localAdminUser}</string>
<key>Password</key>
<string>${localAdminPassword}</string>
<key>AdditionalUsers</key>
<array>
<dict>
<key>Username</key>
<string>${userName}</string>
<key>Password</key>
<string>${userPassword}</string>
</dict>
</array>
</dict>
</plist>
I have tis code but it doesn't seems to work.
tell application "System Events"
-- create an empty property list dictionary item
          set the parent_dictionary to make new property list item with properties {kind:record}
-- create new property list file using the empty dictionary list item as contents
          set the plistfile_path to "~/Desktop/example.plist"
          set this_plistfile to ¬
make new property list file with properties {contents:parent_dictionary, name:plistfile_path}
-- add new property list items of each of the supported types
make new property list item at end of property list items of contents of this_plistfile ¬
                    with properties {kind:string, name:"Username", value:"${localAdminUser}"}
make new property list item at end of property list items of contents of this_plistfile ¬
                    with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
make new property list item at end of property list items of contents of this_plistfile ¬
                    with properties {kind:list, name:"AdditionalUsers"}
make new property list item at end of property list items of contents of this_plistfile ¬
                    with properties {kind:string, name:"Username", value:"${localAdminUser}"}
make new property list item at end of property list items of contents of this_plistfile ¬
                    with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
end tell
The result of the above code will generate a plist file below
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>AdditionalUsers</key>
          <array/>
          <key>Password</key>
          <string>${localAdminPassword}</string>
          <key>Username</key>
          <string>${localAdminUser}</string>
</dict>
</plist>

Hello
You need to create elements at correct container. Like this.
set plist_file to (path to desktop)'s POSIX path & "example.plist"
--set plist_file to "~/desktop/example.plist"
tell application "System Events"
    tell (make new property list file with properties {name:plist_file})
        make new property list item at end with properties {kind:string, name:"Username", value:"${localAdminUser}"}
        make new property list item at end with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
        tell (make new property list item at end with properties {kind:list, name:"AdditionalUsers"})
            tell (make new property list item at end with properties {kind:record})
                make new property list item at end with properties {kind:string, name:"Username", value:"${localAdminUser}"}
                make new property list item at end with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
            end tell
        end tell
    end tell
end tell
Or you may create a record in AppleScript and set the value of plist file at once. Like this.
set plist_file to (path to desktop)'s POSIX path & "example.plist"
--set plist_file to "~/desktop/example.plist"
set dict to ¬
    {|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}"} & ¬
    {|AdditionalUsers|:{¬
        {|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}"} ¬
--set dict to {|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}", |AdditionalUsers|:{{|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}"}}}
tell application "System Events"
    tell (make new property list file with properties {name:plist_file})
        set value to dict
    end tell
end tell
Regards,
H
Message was edited by: Hiroto (PS. Fixed second script so that it uses the original case (uppercase) in key string)

Help needed to create desktop application background using javaFx.

Hi,
i need to create background for my desktop application in JavaFx. It have top side bottom menu bars to place icon buttons for my app. The whole scene need to resize. I had tried this using
JavaFx composer. But my issue is like in java swing i can not able to create different panels and set different styles. Please help me on this issue.
Thankyou.

Hi mate take a rectangle and fill it to scene width !
use fill gradient and bind it to your main scene.width
for example :
Rectangle {
fill: color.Blue
stroke: LinearGradient {
startX: 125.0, startY: 0.0, endX: 225.0, endY: 0.0
proportional: false
stops: [
Stop { offset: 0.0 color: Color.web("#1F6592") }
Stop { offset: 1.0 color: Color.web("#80CAFA") }
use appropriate start and offset then bind it to scene width and height.
width : bind scene.width;
height : bind scene.height ;

Does we need to Create a file Before using Open dataSet

Hi Guys,
            Can any body tell me whether we have to create a File before using Open dataset for writing files in Application Server.
           Can anybody write a program for EKPO table to store it in application Server using OpendatasSet ?Is there any specific care we have to take for Executing   pgm in Background?
I wrote the pgm for Foreground using GUI- Download.
PGM.
      select * into table it_ekpo from ekpo .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename ='c:\EKPO.xls'
filetype = 'ASC'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
data_tab = it_ekpo
*fieldnames = l_heading
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3 .
                   Plzzzzzzzzz Make the changes for existing Pgm.any help is awarded with points.Its Urgent.
Thanks,
Gopi.

Hi Guys,
             Thanks for ur immediate response.I am sending the code just confirm me whether is correct r not?
DATA : wa_EKPO_file   TYPE file_table-filename.
select * into table it_ekpo from ekpo .
OPEN DATASET wa_EKPO_file FOR OUTPUT         "Write to appl. server
                                      IN TEXT MODE
                                      ENCODING DEFAULT. "Open dataset Return code
IF sy-subrc = 0.
LOOP at IT_EKPO into WA_EKPO.
TRANSFER wa_ekpo to wa_ekpo_file.
ENDLOOP.
ENDIF.
                                         I want write the data into SPREAD Sheet .Can u guys tell me how to write into Spread Sheet using Open data Set.
Thanks,
Gopi.

Need to Create a Sales Order Using BAPI....

Hello Gurus,
I have called 'BAPI_SALESORDER_CREATEFROMDAT2' n a FM and trying to create a Sales Order. I have passed the header (auart, vkorg, vtweg, spart) and partner (nmbr and role). I passed the parameters to BAPI but in the return messages it says 'Sales Document was not changed V4 E'.
I hope I am clear, if not please ask...
Suggestions would be rewarded....
Regards
Leo

Hi Leo,
Check out the following codes:
Even I have worked in ECC 5.0.These are the mandatory parametersthat u need to pass to create a Sales Order successfully...
REPORT Z6SKS_HERSHEYS2.
data : order_header_in1 type BAPISDHD1.
data: order_partners1 type BAPIPARNR occurs 0 with header line.
data: ORDER_ITEMS_IN1 type BAPISDITM occurs 0 with header line.
DATA : SALESDOCUMENT1 TYPE BAPIVBELN-VBELN.
DATA : RETURN1 TYPE BAPIRET2 OCCURS 0.
DATA : RETURN2 TYPE BAPIRET2.
   order_header_in1-doc_type = 'TA'.
   order_header_in1-sales_org = '0001'.
   order_header_in1-distr_chan = '01'.
   order_header_in1-division = '01'.
   ORDER_ITEMS_IN1-material = '000000000000000013'.
   append ORDER_ITEMS_IN1.
   order_partners1-PARTN_ROLE = 'WE'.
   order_partners1-PARTN_NUMB = '0000000017'.
   APPEND order_partners1.
Perform call_function.
*&      Form call_function
      text
--> p1        text
<-- p2        text
form call_function .
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
SALESDOCUMENTIN               =
    order_header_in               = order_header_in1
ORDER_HEADER_INX              =
SENDER                        =
BINARY_RELATIONSHIPTYPE       =
INT_NUMBER_ASSIGNMENT         =
BEHAVE_WHEN_ERROR             =
LOGIC_SWITCH                  =
TESTRUN                       =
CONVERT                       = ' '
IMPORTING
   SALESDOCUMENT                 = SALESDOCUMENT1
tables
   RETURN                        = RETURN1
   ORDER_ITEMS_IN                = ORDER_ITEMS_IN1
ORDER_ITEMS_INX               =
    order_partners                = order_partners1
ORDER_SCHEDULES_IN            =
ORDER_SCHEDULES_INX           =
ORDER_CONDITIONS_IN           =
ORDER_CONDITIONS_INX          =
ORDER_CFGS_REF                =
ORDER_CFGS_INST               =
ORDER_CFGS_PART_OF            =
ORDER_CFGS_VALUE              =
ORDER_CFGS_BLOB               =
ORDER_CFGS_VK                 =
ORDER_CFGS_REFINST            =
ORDER_CCARD                   =
ORDER_TEXT                    =
ORDER_KEYS                    =
EXTENSIONIN                   =
PARTNERADDRESSES              =
IF NOT SALESDOCUMENT1 IS INITIAL.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            WAIT          =
           IMPORTING
             RETURN        = RETURN2
   ELSE.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
          IMPORTING
            RETURN        =
   ENDIF.
endform.                    " call_function
This should help u...
Please reward points if found useful...

Need help creating full battery alert using visual basic script

Hi,
I have been searching for resources, programs and code that will create an alert for me to unplug my charger when my laptop
battery is charged to full (or almost full).
The only problem with this code is that
Line 13: iRemaining (or RemainingCapacity called from BatteryStatus returns a 0 (might be a floating point which I can't figure out why). I even checked the microsoft documentation and its supposed to be a percentage.
I want to get either the current percentage of the battery or the total Fullchargedcapacity and the EstimatedRemainingCapacity to find the % of battery level.
Essentially what I am asking is how can I return the battery % using visual basic script.
Help!
The Code:
1 set oLocator = CreateObject("WbemScripting.SWbemLocator")
2 set oServices = oLocator.ConnectServer(".","root\wmi")
3 set oResults = oServices.ExecQuery("select * from batteryfullchargedcapacity")
4 for each oResult in oResults iFull = oResult.FullChargedCapacity
5 next
6
7 while (1)
8 set oResults = oServices.ExecQuery("select * from batterystatus")
9 for each oResult in oResults
10 iRemaining = oResult.RemainingCapacity
12 bCharging = oResult.Charging
12 next
13 iPercent = ((iRemaining / iFull) * 100) mod 100
14 if bCharging and (iPercent > 95) Then msgbox "Battery is at " & iPercent "%",vbInformation,"Battery monitor"
15 wscript.sleep 30000 ' (30 seconds)
16 wend

14 if bCharging and (iPercent > 95) Then msgbox "Battery is at " & iPercent "%",vbInformation,"Battery monitor"
On my Windows 7 machine your script returns the desired percentage (after adding the missing "&" to the right of "iPercent" in Line 14).

Need to create a 'gradient mask' using a b&w photo image.

I have not created a document yet and would like some thought on how to do this: I want to use a continuous tone black and white image which is somewhat close to what would be a 'knockout' but with soft edges - so it gradates appropriately over the background image I want to use, making the black part of the image used as the mask become much of the effect of a gradient mask: the background image shows through whereever there is the 'black' and 'tone' of the image. I hope this makes sense.
my first thought is to create a layer mask and then paste the black and white image onto that, but I'm not sure if that will work to accept the 'soft tones' of the image and work appropriately.
Has anyone had experience with this type of thing that they can share what steps I should take to make this effect work?
TIA,
Ken

Doug.S wrote:
Such a mask can also be very useful in an adjustment layer to control color, sharpneess, contrast, luminance, etc.
See/search for PPW, Dan Margulis, Photoshop books on color corrections such as LAB or Photoshop workflow, or Italian site "color duels" or Yahoo group "colortheory".
This is interesting. I'll check these sources and try some of this today. Thanks Doug.

Need to Create a Date for Use in Filter

I need to set a filter to the effect of Modified Date >= [CURRENT_YEAR] || '02-01' and can't seem to get the filter right to allow me to concat/insert the year to the '02-01' to just get MM/DD/YYYY = 02/01/[Current Year]. It keeps throwing SQL errors.
Here is the text I used to get the string but I can't seem to get this into an actual date format. I've tried doing CAST as DATE and doing a DATE 'YYYY-MM-DD' format as well.
CAST(VALUEOF(NQ_SESSION.CURRENT_YEAR) AS CHAR)) || '-02-01'

Ok. I finally found something that will work no matter what month we are talking about. The goal was to find the first day of the prior month so I always look for the two months activities.
So if current date is 06/08/2010 then I wanted all activities >= 05/01/2010. If the date were 01/12/2010 then I would want 12/01/2010 as my date to filter etc. It is the rollover that messes up most of the date logic when using date parts as filters.
Here is what I came up with and it works great. You basically subtract a month from today's date and then subtract the number of days (minus one) to get back the first of the prior month.
TIMESTAMPADD(SQL_TSI_DAY,
((DAY(TIMESTAMPADD(SQL_TSI_MONTH,-1,VALUEOF(NQ_SESSION.CURRENT_DT))) -1) * -1)
TIMESTAMPADD(SQL_TSI_MONTH,-1,VALUEOF(NQ_SESSION.CURRENT_DT)) )

Ecommerce site - how do I create several product pages using only one table of data?

Hi
Im designing an ecommerce clothing site for my assignment using an access database.
When I create the Data Set it takes all the information from my Acess table "Products" , creating one huge list of products on a single web page.
However, i would like to have the product data split across many web pages depending on there specific Category given [i.e. T-shirts, Jumpers, Trousers, Bags, Acessories].
Does anybody know how to do this? I think it involves setting certain Parameters, or writing a SQL statement in Dataset.
Thanks for any help
Amy

Hi Amy,
Here's a series of articles I did for Adobe Developer's Center, included is an example of a shopping cart app you can use as a staring point or an example if you like.
http://www.adobe.com/devnet/dreamweaver/articles/build_shopping_cart.html
http://www.adobe.com/devnet/dreamweaver/articles/build_shopping_cart_pt2.html
http://www.adobe.com/devnet/dreamweaver/articles/build_shopping_cart_pt3.html
Lawrence *Adobe Community Expert*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in ASP, PHP and CF

Can XSQL create multiple session variables using only one database call?

Right now if I want to set session variables for username and accesslevel, I code out like this:
<xsql:set-session-param name="name" bind-params="username password">
SELECT DISTINCT USERNAME
FROM LKUP_USER
WHERE USERNAME = ? AND PASSWORD = ? AND ACCESSLEVEL = 0
</xsql:set-session-param>
<xsql:set-session-param name="authlvl" bind-params="username password">
SELECT DISTINCT ACCESSLEVEL
FROM LKUP_USER
WHERE USERNAME = ? AND PASSWORD = ? AND ACCESSLEVEL = 0
</xsql:set-session-param>Is there any way to do it so that I don't have to do multiple queries to the database to set session variables? i.e., something like this:
<xsql:set-multiple-session-param name="user authlvl" bind-params="username password">
SELECT DISTINCT USERNAME,
ACCESSLEVEL
FROM LKUP_USER
WHERE USERNAME = ? AND PASSWORD = ? AND ACCESSLEVEL = 0
</xsql:set-multiple-session-param>Sort of like how bind-params works. Setting bind-params="username password" makes the first ? akin to username and the next ? akin to password.
Is this functionality already in existence?
Thanks!
Malik Graves-Pryor

Not currently possible to collapse into one request without doing it in a custom action handler.
A custom action handler can:
[list=1]
[*]Get the current JDBC connection from the XSQLPageRequest
[*]Get the SQL statement to perform using the function getActionElementContent
[*]Handle any bind parameters specified an a bind-params attribute on the action element by calling handleBindVariables()
[*]Execute and fetch the row from the query
[*]Check to see that the return value of getPageRequest().getRequestType() equals the value "Servlet"
[*]Cast the page request to an XSQLServletPageRequest and call getHttpServletRequest()
[*]Call getSession() on the request
[*]Set the session variables you want to
[*]Close the JDBC statement
[list]
will consider a built-in enhancement for a future XSQL release.

Share songs and create tracks between users using only iPhones

Me and a friend from out of state want to collaborate on tracks but we only have iPhones. We like garage band, how can we do this. Right now we think the only option is to have 1 iTunes account that we share. It seems like there should be a better option but we cannot figure it out. Please help.
Thank you

To share GarageBand projects as project and not as audio file, you can either save the project in iCloud or share the project to a Mac, mail it, then upload it from another mac
Both options are not feasable for you, since you have only iPhones and not macs as well. And the iCloud solution would require you to be using the same AppleID on your iPhones and share your iCloud, including mail, contacts, ....
As a workaround - you can solo the tracks and mail each track as audio file.
Or, if you and your friend have access to a PC, see turingtests2's workaround:
See this thread:
Re: Loading a .band file back into Garageband (iPad 2)
or HT4622 Re: Can I share the .band file to my friend for edit/record his track?
also turingtest2's solution to upload project files from your PC back to the iPhone.

Do we need to create workmanager for applns in WL 10.3?

Do we need to create execute threads manually using work manager in weblogic 10.3 (ALSB)/ OSB . or have they been taken care of by default thread pooling mechanisim.
Does creating workmanager and assigning 'n' no of threads to appln really help performance of application?
Appriciate any Suggestion.
Regards,
Sreepad K

Hello Sreepad,
Do we need to create execute threads manually using work manager in weblogic 10.3 (ALSB)/ OSB . or have they been taken care of by default thread pooling mechanisim.For production environments, it is always suggested to use custom work managers to optimize the use of applications and enhance security. OSB has a default work manager but it is not recommended to use it in your production environments. To know more about work managers, please refer -
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/config_wls/self_tuned.html
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/ConsoleHelp/taskhelp/work/CreateGlobalWorkManager.html
Regards,
Anuj

Do i need to create dimensions on mp using only ods?

Similar Messages

Maybe you are looking for