Do notes disappear after a certain time?

The earliest entry in the Notes app has disappeared. Do they get deleted after a certain time or if I have inadvertantly deleted it can i get it back from icloud somehow?

They never expire - at least from iCloud. I still have some five year old notes.

Similar Messages

Will an audio message disappear after a certain time even if the receiver has not listened to them?

I have noticed that sometimes i will send someone an audio snippet and they don't get it, I know it expires after two minutes from being heard does that time limit also apply to them even if they aren't heard?

It would be stupid if it did. After all, what's the point if the user on the receiving end never got to hear it?
Tl;dr: Nope.

Do notes go away after a certain time?

Do notes on the iphone4 go away after a certain time? One of my most important note is gone.

How old are you? If 1998 is the year you were born, it's entirely possible your parents have subscribed to a 'smart limits' service, which will disable your data connection, text messaging, etc. during hours they choose.

IPOD freezes after a certain time

After a certain time using the device, the touch display does not work anymore. The app is still running, but not reacting any more. After switching off the Ipod is working again for a certain time.
The device has been rebooted several times, restored via Itunes and also the firmware is up to date.
The device is one year old, 8GByte, enough memory available and the battery charged.
The problem started some weeks ago.
I started to remove some apps without success actually.
Apps that have a bigger size seem to increase the occurence of the problem
Using WiFi increase the occurence also.
Any ideas welcome!!!

Here finally the solution for my problem:
The hardware of the Ipod had a problem. The device had been replaced by a new one. As I bought the device in Germany, there is an extended warranty of 24 month. The retailer where I bought the device took it back and gave the complete money back including the shipment costs! So I ordered the now IPod Touch G4 and have now fun again.
The suggestion which already had been given was correct and helpful.
A comment about the retailer:
I bought the device via Amazon. There support even on a Sunday evening was just great. In one week (!!!) I sent the device (on Monday), got the result of the investigation and received the new device (on Friday).
The support I received here was just great!

IDVD is closing after a certain time.

Hi, i made a movie with a sony Z1-HDV camera and made the montage in FCP. Than i export it with Quicktime 7.5. Than dropped it in iDVD. After a certain time iDVD just quits. With the below report.
Also when i just open iDVD and open an other iDVD project and do nothing iDVD just quits after a certain time. Read below report.
What to do???? I have to finish this project by wednesday!!!! HELP!!!
Process: iDVD [512]
Path: /Applications/iDVD.app/Contents/MacOS/iDVD
Identifier: com.apple.iDVD
Version: 7.0.2 (1100)
Build Info: iDVD-11000000~17
Code Type: X86 (Native)
Parent Process: launchd [84]
Date/Time: 2008-08-03 19:43:10.272 +0300
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 22

Yikes! You're on the very edge of a kernel panic if you haven't yet seen one. Something is amiss ....
Are you using any external FW or USB HD's / 3rd party devices while attempting to burn an iDvd?
If so, Restart your Mac without any 3rd party devices attached and try again. But first run apple's disc utilities to Repair Permissions. Assuming you have no less than 20GB's of available HD space on the boot volume and that all assets for iDvd are located on this same volume (your main HD and not on the external volume/s).
Post back with your results.
Message was edited by: SDMacuser

Why do my Reminders sometimes not alert after the set time?

Why do my Reminders sometimes not alert after the set time? I've tried re-starting repeatedly. I've tried deleting older completed reminders (I only had 300). Is there a fix for this?

You problem sounded rather odd, so I tried to duplicate it in iTunes 11 and I couldn't.
I turned off copy to iTunes media folder when adding to library, then I moved a music track that was not in the iTunes media folder from folder A to folder B and right clicked on it and selected open with iTunes and it played fine. (I have to do it this way as iTunes is not my default player for MP3).
However the consequences of doing this are that you end up with two copies of the track in the library database, the original which can no longer be found as it is not in its original location and the new entry pointing to the correct location which plays OK.
So as far as I can tell, there must be something else going on as I can't dublicate your problem in iTunes 11
You may find this program interesting
iTunes Folder Watch
http://albumbrowser.klarita.net/iTunesFolderWatch.html
If you want an easy time with iTunes it really is easier to let iTunes manage your music in the iTunes media folder. Also it make life a lot easier if you want to move to a new disk or PC as iTunes can tolerate the iTunes media folder being moved as long as you tell it where it is.
Added
I realised that my last experment was not a purchased track.
When I did it with a purchased track, iTunes recognises that it should be in the library database and brings the track up with an exclamation mark next to it. Strangely the track was added to the library with the correct loaction and would play on the secon try.
Odd behaviour, maybe it is something to do with the icloud storage system as iTunes knows you purchased the track.

All my Notes disappeared after ICloud upgrade

All my Notes disappeared after ICloud upgrade. I cannot find them, nor a way to recover them from backups? Any ideas? This is a BIG hiccup!

I posted this on another discussion:
Similar problem: I was at a store today and went to my Notes on iPhone 3GS to look up information recorded there about medications for an aging parent. I am syncing through iCloud so the same notes are on my iPhone, iPad 1, and desktop Mac (in Mail). I opened one note, but it didn't have the information I needed, so I went back to the main Notes list and picked another of the dozen notes. I was scrolling down through that note and then suddenly....poof....the note was gone. ALL the notes were gone. The note pad said NO NOTES. ***???!!!!
They were gone from my iPad, too. The notes represent information gathered and organized from multiple years (with no problems until now). The notes are information I NEED. I created a test note, it showed up on my devices. Then I chose to delete it to see if a single key click could do that. The app requires a second click on a Delete Note button as confirmation. And there's no way to delete ALL notes while viewing a single note, deliberately OR accidentally.
Any suggestions about how to recover the notes lost today? Thanks in advance.

After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I fix?

After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I get them to disappear like they always have?

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

Powershell- FTP Script to copy files only after a certain time

Hey guys,
We are currently running an FTP script that decrypts pgp and copies/moves several files to different archived and production locations. These files come in constantly throughout the day and we need to ensure a certain 8 files get moved to 4 different locations
but NOT before a certain time.
Ex: File1 and File2 are received EARLY along with 50 other files and decrypted at 9pm EST on 9/4. File1 and file2 need to WAIT to be moved until after 12:05am EST on 9/5 or it is slapped with an incorrect $date/time and not processed correctly but
every other file needs to be moved (which is currently all configured).
Right now, both file1 and file2 are being moved as the script runs (every 10 minutes) so when the files come in early from the vendor- they get the incorrect date/time stamp.
I'm fairly new to powershell so I'm not quite sure how to set this up to only move the file if it is between a certain time- say 12am-1am and no other time.

I was able to resolve this myself by doing the following:
$hourdate = get-time –uformat “%H”
#Copy-Item as long as time is in the 12:00am or 1am hour
if(($hourDate -eq "0")-or ($hourdate -eq "1"))
copy-item objects
Thanks guys

When I try to download OSX mavericks in the App Store, it takes forever then the downloading icon just disappears after a loooong time just to get half way

When I try to download osx mavericks, it takes and xtremely long time...like over 2 hours just to get to the half way mark...then the downloading icon on my dock for it just disappears after it has been half way finished.
I am running on a mbp 10.6.8 model macbookpro5,5

I recently purchased a second hand new macbook air, although it was second hand to me the previous owner had never actually turned it on.
Something doesn't make sense here, though I'm not saying the previous owner is lying....
Time to send your serial # to iTS and let them see what's happening here.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Getting labview to stop after a certain time.

I'm trying to get labview to stop running after a set time? I have a load cell attached to a NI ELVIS board and once the set load is read by labview it's outputting a voltage thourgh the board but continuesly till the load is removed. I would like to ouptut the voltage to stop after a certain amount of time with the load still on the load cell.

bmira1 wrote:
I would like to ouptut the voltage to stop after a certain amount of time with the load still on the load cell.
Of course stopping LabVIEW (as described in the post title) and stopping an output voltage (as described in the post body) are two completely different things! Blindly stopping LabVIEW will not necessarily reset any active analog output to zero.
Best would be a simple state machine that changes the output to zero after a certain elapsed time. This could for example be done with the timeout case of an event structure or even with the "elapsed time" express VI (or with the code fragments given above after you make sure there is a small wait in the polling loop)
When the experiment starts, write a certain voltage to the output once (You don't need to do that over and over, only when the voltage changes) and, after the time has elapsed, write a zero voltage to the output.
No need to stop LabVIEW. You should actually disable or catch "panel close?" events and other abnormal shutdown attempts, and reset the outputs in an orderly fashion before allowing the program to stop.
LabVIEW Champion . Do more with less code and in less time .

Call quality gets choppy after a certain time

Hello, Having an issue with my Comcast phone service. Quality seems to be good (for VOIP) on most calls, however, if I have a call that runs over 45 minutes or so, the line gets choppy and I'm only able to hear about 1 out of every 3 words. This happens consistenty on longer calls after a certain period of time (usually after around 45 minutes). There doesn't seem to be any problem at all during shorter calls, but it's incredibly annoying since I use my phone for work and many of my work calls run longer. Thanks,Ryan

Group video calls have a fair usage policy so if you are doing a group video call more than 4 hours a day/100 hours a month then you could have issues. Normal video calls should not have that limitation though I could imaging there could possibly be a limitation if you attempted to keep a single video call running 24x7x365.
http://www.skype.com/en/legal/gvc-fair-usage/

Crystal report not shown after application idle time

i have a web page which uses around 10 session variables to store values on a button click.and after assign session values Response.Redirect("~/url",false); to a a page which contains crystal report viewer.and report should show those session values.after keeping the application idle for 45 mins i click on the button which assign session values.then it's redirecting to the report page but the report is not shown.it shows a empty page and no errors shown(only happens application is idle for nearly 45 mins other wise works fine)
i'm using iis 7
in the web.config i have set sessionState timeout="60" and application pool idle time out to 60 mins.
any idea why this happens

Make sure you are on SP 8
Make sure you are using .Close and .Dispose on your report objects as you get done with them.
What OS? (2003, 2008, 2012)
Provide more info on the following:
The problem is that the Crystal Report Viewer does not load after a few hours.
What does that mean? Errors? Warnings? Behavior? Symptoms?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Identify/expire Pages that have not been accessed for certain time

Hi,
I would like to create a publishing portal. Many users are able to create pages. I have the requirement that if a page does not get accessed for a certain time-period - it should be flagged for deletion and the creator should be notified by email.
Expiration policies depend on creation/modification date. Does this work for the last-accessed time (whereever I get this information from) aswell?
Sven

Use below powershell
$outputPath = Read-Host “Outputpath (e.g. C:\output\UnusedSites.txt)”
$lastDate=Read-Host “Last Accessed Date (in format mm/dd/yyyy)”
$gc = Start-SPAssignment
$site=$gc | get-spsite -Identity https://sitecollectionUrl
foreach($web in $site.AllWebs)
if ($web.LastItemModifiedDate -lt $lastDate)
Write-Host -f Red “Site is old…” + $Web.Title
Add-Content -Path $outputPath -Value “$($web.Title),$($web.ServerRelativeUrl),
$($web.LastItemModifiedDate),$($web.Author)”
else
Write-Host -f Green “Site: [" + $web.Title + "] Last Modified Date: ” + $web.LastItemModifiedDate
Stop-SPAssignment $gc
Or
plan to use this tool
http://www.harepoint.com/Products/HarePointAnalyticsForSharepoint/FindOutdatedContentInSharePoint.aspx

Web Crystal Report not working after period of time

Hi
I have had a problem for a long time now on one of our web servers, it's becoming more of an issue lately due to a web site using Crystal more. The problem is that the Crystal Report Viewer does not load after a few hours. If I re ship the main DLL into the Bin folder for the site, then something gets 'reset', and hey presto, Crystal starts working again.
The problem would even arise with a basic CR, with just one Textfield on it (i.e. not show)
Web server is 32 bit Windows Server Web Edition SP 2. Asp.Net project built in VS 2012 against .Net 4.0.
Anyone have any ideas?
Many thanks,
Julian

Make sure you are on SP 8
Make sure you are using .Close and .Dispose on your report objects as you get done with them.
What OS? (2003, 2008, 2012)
Provide more info on the following:
The problem is that the Crystal Report Viewer does not load after a few hours.
What does that mean? Errors? Warnings? Behavior? Symptoms?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Do notes disappear after a certain time?

Similar Messages

Maybe you are looking for