Do we need to match KP06 and KPZ2?

Dear Experts,
I understand that KP06 can do the planning by a combination of 'cost center' and 'cost element', and whereas KPZ2 can plan by 'cost center' only.
Say the following are the example of the planning in KP06.
Cost center 101 and cost element 222 = $1000
Cost center 102 and cost element 222 = $2000
Cost center 103 and cost element 222 = $3000
Cost center 101 and cost element 333 = $500
Cost center 102 and cost element 333 = $1500
Cost center 103 and cost element 333 = $2500
My question is, do we need to match the total cost (in cost center wise) we planned in KP06 with the cost planned in cost center wise in KPZ2?
In my example will be :-
Cost center 101 = $1500
Cost center 102 = $3500
Cost center 103 = $5500
regards,
Abraham

Hi,
In txn KPZ2 the values are budget values (value type 41, activity KBUD) whereas in KP06 the values are plan values (value type 01, activity RKP1).
In cost center accouting you can do periodic budgeting in TS KPZ2, but there is no cost element based budgeting in cost center accounting.
Overall planning is intended for a planning horizon which is yearly based and is considered as additional to the cost-element based planning.
The logic is that you should make use of TS KP06 if you need a more detailed planning tool (cost element based).
regards
Waman

Similar Messages

Difference between KP06 and KPZ2

Hi experts,
can you explain the different between KP06 and KPZ2. It will very helpful for me.
Sourav
Moderator: Please, search before posting

Dear Surav,
thru KP06 you handle PLAN values. Thru KPZ2, budget values.
PLAN means that you can simulate costs against your objects, such as cost centers and orders
and then make a comparison with real data. Possible differences between plan and rela values are calles variances.
Budget is the approved cost structure for an action or project in a particular period of time.
Budgeting differs from cost planning in that it is binding. While you must estimate costs as accurately as possible during the planning phase, it is in the approval phase that you prescribe your funds, in the form of a budget.
In other words, budgeting your objects you set the max amount of costs they can sustain.
hope this helps
You can find further details here:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/5b/d2200743c611d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a9/ab7f68414111d182b10000e829fbfe/frameset.htm
br, Guido

What are diffrences between KP06 and KPZ2

Dear All,
Need your detailed information regarding differences between KP06's functionalities and KPZ2's functionalities?
The many thanks in advance,
Best Regards,

Hi,
The Functionality of the KPZ2 is Cost center Budget Planning.You can plan for the budgeting of cost centers like internal order busdget & Maintenance order budgeting control.You can plan for the cost center budgeting & control the value of the cost center posting by every month wise for whole year.
The KP06 is for the Activity Price calculation like Activity for the Working hours of labour,PP activity.
The combination of the Cost elemnet, cost center & activity you can update the Activity price & calculate,after that you can check with activity rate in KP26.
Regards,
Raj

When I try to access my music library from AppleTV is keeps telling me to turn on ITunes Match. I am not supposed to need iTunes Match for Home Sharing. I tripled checked to ensure Home Sharing is turned on and it is. Can anyone offer a solution?

When I try to access my music library from AppleTV is keeps telling me to turn on ITunes Match. I am not supposed to need iTunes Match for Home Sharing. I tripled checked to ensure Home Sharing is turned on and it is. Can anyone offer a solution?

All of your computers content are available in the AppleTV section called "Computer". This is where you will find your music.
The Music section of the AppleTV is only for those who subscribed to iTunes Match.

I installed the latest version of flash player and it said installed successfully and i can use it just fine, but when I checked system requirements it didnt seem to match. it needed 2.33 ghz and I have 2.13ghz. can this cause problems to my computer? i h

I installed the latest version of flash player and it said installed successfully and i can use it just fine, but when I checked system requirements it didnt seem to match. it needed 2.33 ghz and I have 2.13ghz. can this cause problems to my computer? i have an intel i3 proccessor, windows 7, internet explorer.

Since all Intel i3 processors have at least 2 cores, your specs are well above the requirements; see http://ark.intel.com/products/family/75025#@All
I have some computers with far slower processors, and Flash Player 14 works perfectly well on them too.

I purchased Itunes Match and every time i try to run it, it doesnt even finish step 1, it just says "We could not complete your itunes store request, an unknown error occured (4007" what do i do because i need itunes match to work!

I purchased Itunes Match and every time i try to run it, it doesnt even finish step 1, it just says "We could not complete your itunes store request, an unknown error occured (4007" what do i do because i need itunes match to work!

- Try manually placing the iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Need help to compare and replace

Hi All,
I have a cumulative file that is appended at the end of the month. The Table holds customer information, like:
customer_id, name, address, phone, notes, DATE_STAMP
In addition to this, I have other Tables that are split up into monthly Tables and information for these monthly Tables is gotten from this one cumulative Table. When I collect information at the end of the month (which is appended into the cumulative Table that grows in size), I put the name of the MONTH into the DATE_STAMP column. MARCH, APRIL, MAY< JUNE, etc......
So I select all of MARCH (from the cumulative Table) and then that is put into the MARCH Table. These monthly Tables are compared with other control Tables for analysis purposes.
So, the challenge is that say in APRIL or in MAY, an important column value changes in the cumulative Table and I need to update the Monthly Tables to reflect that.
So.... I will concentrate on the key columns.
customer_id, DATE_STAMP, Sales_Person_Assigned
From the cumulative Table (which has many months), say I select all of MARCH and move those customers to a MARCH_TABLE. I will use one customer as Example:
customer_id, DATE_STAMP, Sales_Person_Assigned
12345, MARCH, NULL
Then in APRIL, more data goes into the cumulative file, and those are stamped APRIL for the DATE_STAMP column.
So, when I check the customer that was in MARCH, now in this file, they might be like this: (sales person updated the record)
customer_id, DATE_STAMP, Sales_Person_Assigned
12345, MARCH, Frank Smith
I need a way to take the CUMULATIVE Table and compare it with the corresponding MONTH_Table and update that Null to Frank Smith.
So say it is: September now and we have 9 separate Tables Jan - September and the ONE cumulative Tables that has Jan - September, I need that one cumulative Table to check all the individual Tables and based on:
customer_id AND DATE_STAMP - do a JOIN match there and if the value was null before in the Sales_Person_assigned field, if that is no longer null, update that to the new value from the cumulative to the monthly tables.
Any help would be appreciated, sorry if this sounds too complicated.

Thanks Sean and Frank for replying.
This problem is a little bit more complicated, I didn't want to post all the little details, no body would read my post (I am afraid). The Sales people update their Store data in a Excel sheet, they have no access to a Database or know anything about databases, they can barely use Excel as it is. I know this sounds bad, but that's the way it is, I have no control over that.
So in their sheet, the customer_id stays constant, and DATE_STAMP (once that is stamped) also stays constant, they might manually go in and change a NULL value under the Sales_Person_Assigned cell to the name of the Sales person.
So when I bring in new records, and (2) the manual changes to records that are already there, I need to update that change from the CUMULATIVE into the MONTHLY.
so:
WAS
customer_id: 12345
DATE_STAMP: MARCH
Sales_Person_Assigned: NULL
NEXT MONTH IT NOW IS:
customer_id: 12345
DATE_STAMP: MARCH
Sales_Person_Assigned: Frank Smith
I need a query that will look into all the MONTHLY_TABLES and sync the change of that Sales_Person_Assigned.
Because the entire Analysis (done by a different person and department) is based on the idea that a customer will shop more and spend more when they have a dedicated Sales_Associate to help them vs. no body.
I hope this make it clear. Sean's Query is close to what I need.
I was thinking if there is a way to this: If there is a change that makes it into the MONTHLY_TABLE to also maybe create a new column in the MONTHLY_TABLE so indicate a change and put a Date in there, so I know which rows were updated and which were not.
Hope this is more clear.

Hi there, our mac has an IOS version 10.5.8 and i need to update it to 10.6.8 in order to update our itunes account....when i start softwear update it tells me that nothing needs to be updated and i also do not have access to the mac app store...How can i

Hi there, our mac has an IOS version 10.5.8 and i need to update it to 10.6.8 in order to update our itunes account....when i start softwear update it tells me that nothing needs to be updated and i also do not have access to the mac app store...How can i update my ios? thanks Matthijs

Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac". Write down what it says about "version"and report that here. Now continue to "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
If you have a PPC Mac you cannot sync your idevice without a newer computer. See the end of this post for options.
If it says you have an Intel Mac you can upgrade to Snow Leopard, but check system requirements first:
Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You can buy Snow Leopard at:
Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After installing run the updater to 10.6.8, then upgrade iTunes.
Jan. 2014 post by Kappy on doing all this: https://discussions.apple.com/message/24599931
Options if you cannot upgrade: iTunes Store purchases can already be downloaded directly. Use iTunes Match to put non-Store music in iCloud, then download to your device from there. Backup your device directly to iCloud over a wireless connection. Photos can be downloaded from the Camera Roll using iPhoto or Image Capture.

FI and PCA doesn't match/Receivables and Payables?

Hi!
I have a problem with Profit center accounting. I try to match receivables and payables in FI and PCA, but they don't match (transaction KE5T).
If I look transaction 1KEK, e.g. account xxxx shows 500.000 EUR. When I look e.g. transaction FS10N, the same account shows 800.000 EUR (cumulated balance).
So all the entries have not transfered to PCA from FI. Whe have done the period-end transfers (transactions 1KEK and 2KES).
So why not all the entries have transfered to PCA and how to fix this problem?
Points will be given!

Hi
Please ensure that the referred GL account is added in T.Code 3KEH.
If not, you have to add the same with a default PC and need to post all the existing documents posted in that GL account, manually to PCA using t.code 1KE8.
Regards

I want to upgrade my hd to a 750 or 500 on my mbp what do i need to match(specs)

im on a mid 2010, i am thinking about upgrading the hard drive(possibly later on trading it in. But for the mean time what do i need to match? i know they have speeds, is there anything else? 2.5" as well right? how would you go about transfering your data to the new hd? Is there any way to get itunes to recognize my new hd as my old hd(for sake of the iphone syncing)?

Your MacBook Pro has got a 2'5" SATA hard drive, so you can install a 750 GB hard drive without any problem. Visit the OWC website to get information about some hard drives > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ HGST and Seagate hard drives have good reputation, and 7200 rpm hard drives will provide you extra performance.
After doing that, what you can do is to get a USB to SATA adapter, install the new hard drive onto your MacBook and connect the old hard drive by USB. Then, turn on your Mac and your computer will start up from your old hard drive. Use Disk Utility's Restore feature to restore your content to the new hard drive > http://pondini.org/OSX/DU7.html
You won't have any problem with iTunes. As you will be restoring your old iTunes library, you won't lose anything from the iPhone, as it will detect that you have got the same library

I have 0 songs in my iCloud/iTunes Match account and it says exceeded limit. How do I fix?

Hard drive crashed and when I loaded my local songs back into iTunes it wouldn't recognize my library. So I deleted all songs from iCloud to start anew. Now it will not allow me to add anything into my iTunes Match account. I have deleted the library, loaded an empty one and then reloaded the songs after cleaning out iCloud of all playlists and songs. I am at wits end. Help.

Hi,
Delete around 1,000 tracks so that the limit is reduced below 25k.
Hold shift key whilst turning off match. Close iTunes then reopen. Turn on match, you will be asked to add this computer, do so. The process may take sometime but if tracks had need previously matched or uploaded, the process will be quicker that a complete new scan.
Once scan has completed, check that the tracks have been matched, uploaded or purchased. Create a playlist based on iCloud status being matched or uploaded. This will tell you the total number of tracks that count towards the 25k. You can now think about readding the deleted tracks.
If you go over 25k non iTunes purchased track again, you can use the second library method to manage your main library. When you delete a track from the cloud it does not delete it from your computer. When you go back to your main library you will see the iCloud status as "Removed". Match will ignore in future scans.
Jim

Error : Contract does not match customer and item information[OSCI.ManufSN]

I need to add Service Call from Service Contract through DIAPI. "Mfr. Serial no" is set as "Unique serial no by" in system general settings.
Creating two Customer Equipment Card from the cfl provided on Service Contract in Item Tab and Internal serial is blank in created Cutomer Equipment Card.
One is terminated and other is active have the same ItemCode but different customers then while adding Service Contract I am paraller generating service call through DIAPI but the system is throughing error - "Contract does not match customer and item information [OSCL.IntrnalSN]"
Thanks
deepak gaur

HI,
Service Contract can be for a specific customer
The contract type cound be (Coverage):
1. including all items (Type Customer) in this case the dates of the coverage is defined in the head!
2. Including specific serial numbers
3. Including item groups
The status every case should have to be Enabled/Approved for valid contract (OCRT.Status = 'A').
In case of Do not forget to set the valid from and valid to dates to define in the system the coverage. (header and items tab from/to dates)
Now, If you create service all, the system will use the first possible Service Contract. IF you have more: you have to select the contract manually.
Ex:
1. One for customer including all items
2. One for a specific serial number
Best Regadrs,
János

HT4913 iTunes match subscription and device association

I have recently purchased an itunes match subscription and I was able to associate it with my new ipad mini, but when I try to turn on itunes match on my iphone 5 and original ipad it won't work. I get an error message that says that I do not have a subscription to Itunes match. It references that I need to go to my computer. When I log on to my itunes account to manage devices, I can see the ipad mini, but not the phone original ipad. Any thoughts on why I can't get this to work? The iphone is latest iOS, but original ipad is only at iOS 5.1 (highest I can go with this ipad, but still compatible with itunes match).

Kate,
You may want to try signing out of the existing Apple IDs (as set up on the iPhone and iPad), then signing them back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
If the two devices are still misbehaving, you might need to turn them off then back on, or reset them as necessary.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue you are experiencing is not resolved, you may find more information by using another one of Apple's support resources - https://expresslane.apple.com/GetproductgroupList.action.
Cheers,
Allen

Profile Match up and Training Event details without LSO.

hello,
We have requirement where we want to show Profile Match up and Training Event details in MSS.But we are not going to use LSO.
so now que is without LSO there ivew will work or not. Now this iview are present in MSS folder.Is this iview are using LSO function module because of that they might not work?
Thanks in advance.
Jayesh talreja

To make it more clear.... sorry for not explaining this initially.
1. There is a service in ESS(ITS) for profile match up.
2. For mss siddharth is asking from where does the data come in case of pv7i and 8i
So the answer for MSS is that if you need to use profile match up without LSO then you make use of the ITS based profile matchup service to identify how you will carry out a development.
I am not aware of any existing transaction for profie in MSS so you need to develop but the answer to your question is
"you can certainly use TEM (without LSO) to create profile match up in MSS".
This has been done for most of the customers by SAP as not everyone uses LSO.
Function RHPP_SHOW_PROFILE_MATCHUP will help you achieve this very easily without LSO.
Please feel free to ask for more details.

HT5085 hi, i bought itunes match yesterday, and i can not connect with the server. Error 4010 appear ever time when i want to entry on Itunes match.Thanks

i bought itunes match yesterday and i can not connect with the server. Error 4010 appear every tiem when i want to entry on itunes match.
Thanks

Here are some things to try:
Close itunes
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again
And, you don't need to turn off the firewall, just add itunes and itunes helper to your security software firewall.

Do we need to match KP06 and KPZ2?

Similar Messages

Maybe you are looking for