Document is not getting attached to PO

hi experts,
I have create a z docu type and oject link as EKPO and additional link as matcomp.when i create a new document and make the status as released.Its not getting displayed in me22n.Do i need to do any furthur coustamizations for this..Please reply

Dear Priyanka,
I think your customizing is ok for attaching Document in PO Item.
First attaching Document to PO Item you need to go in ME21N ( Create PO) Transaction.
Then go to Item Overview Button, here 1st you have to add one po item then you have to click on "Documents" push buttuon. This button is near to "Filter" button. Select here your required document which you want to attach with PO Item.
Say Ok & Save.
Now your document is saved with PO Item. That you can see in ME22N ( Change PO) & ME23N (Dispaly PO) transction.
Sandeep

Similar Messages

Backened documents are not getting updated in Classic Scenario

Hi,
We are using SRM 7.0 version and we are working on classic scenario where the shopping cart - RFX - Contract are created in SRM and the PO - GR - IR are created in ECC. The blackened documents which are created in ECC PO - GR and IR these documents are not getting updated in SRM system.
Is there any business functions to be activated.

Hi Sunil,
You manually run report ""BBP_GET_STATUS_2" after PO is created in MM. Then check if the follow-on-docs are updated in SC.
If it is working fine after you manully run report, you will have to properly set time to run this report automatically.
Best Regards,
Anu
Edited by: Anuradha UG on May 18, 2010 8:09 PM

SQLite encrypted Database does not get attached Using Adobe Air,Why?

Hi,
Any one knows the solution, am trying to attach the encrypted SQLite database adobe air-adobe flex bulder , it does not get attached using sqlconnection.attach throws error, though the given key is correct, but it gets open using sqlconnection.open with the same key, any one knows the solution, how to attach the encrypted data base, since am using two data base one is opened and another must be attached to the existing ,thanks in advance. using adobe air- flex related. i use the following code
databaseFile1 = File.applicationStorageDirectory.resolvePath("Sample_1.sqlite");
databaseFile2 = File.applicationStorageDirectory.resolvePath("Sample_2.sqlite");
dbConnection.open(databaseFile1, SQLMode.CREATE, false, 1024, secKey);
dbConnection.attach("db2",databaseFile2,null,secKey);
got the following error.
ERROR #3125 Unable to open the database file.

And I would say more "this is the issue" !
It should be possible as it is clearly stated in the doc :
public function attach(name:String, reference:Object = null, responder:Responder = null, encryptionKey:ByteArray = null):void
with
encryptionKey:ByteArray (default = null) — The encryption key for the database file. If the attach() call creates a database, the database is encrypted and the specified key is used as the encryption key for the database. If the call attaches an existing encrypted database, the value must match the database's encryption key or an error occurs. If the database being attached is not encrypted, or to create an unencrypted database, the value must be null (the default).
so with a same encryptionkey, I (and this should be the same for FinalTarget) can open the encrypted db but not to attach it... quite strange.

Middleware-Partner Functions not getting attached after BP replication

Dear SDN team,
We have an problem related to CRM middleware . We have enabled Middleware to download BPs from SAP R/3 system to CRM 5.2 system.
Problem: We are able to download the individual BPs like Sold to party and Bill to party from SAP R/3 system to the CRM system. _But the Partner function relationships are not getting attached to these BPs after the replication from ERP to CRM _. I mean the Bill to party is not getting attached to the respective Sold to Party in the CRM system .
Strangely the Contacts for individual BPs is getting replicated via BP relationships
Can someone help me to solve this problem.
What should we do on the MW settings to replicate the respective BP relationships ??
Kindly get back urgently . Suitable points will be awarded for the useful solution.
Regards
Ritvij

Ritvij,
You can try as suggest to setup a filter on CUSTOMER_REL on KVNK. I would exclude any entries where PARNR is a non null value. Beyond that you may need to do a middleware exit to block that data on the R/3 side.
For your second question:
R/3 Account Group = CRM BP Grouping
Your settings PIDE should transfer the the account group to CRM. You will need however to maintain a corresponding grouping with number range on the CRM.
I believe from a business partner "role" perspective, you need to do a middleware exit if you want to replicate the custom account group into a custom role.
If you do however have a relationship then you need need to do the mapping configuration for this.
In the CRM IMG you can use the Menu Path:
CRM->Basic Functions->Partner Processing->Data Transfer. This will alow you to map in any custom partner functions from R/3 into CRM and be linkded on the business partner master.
Take care,
Stephen

SAP ArchieveLink For Dunning Document Is not Getting Archieved

Dear Guru ,
I have encountered an issue which I am not able to resolve.
The Issue is like that SAP ArchieveLink For Dunning Document Is not Getting Archieved For a Particular customer whose Dunn.Procedure = DPPD But in the same system it is getiing archieved for other customer whose Dunn.Procedure DPCD.
In our system there is one Job (Z_SD_DK_SALSA_DUNN) through which it can be done
In the Job Step of this job following prog is being called
No. Program name/command
1 ZSDAR_DUNN_PARAMS
2 SAPF150S2
3 SAPF150D2
4 ZSDAR_POST1
5 ZSDAR_REV1
6 ZIFBSAPO
7 ZIFBPREO_MULTI
8 ZSDAR_VK_COVER
9 ZSD_SPOOL_MAIL_PDF
10 ZIFB_INKASSO_INVPDF
The main prog for Printing and archiving Dunning doc is defined in step 3 - SAPF150D2
But for the customer whose Dunn.Procedure = DPPD it is getting failed.
So guru need your kind intervane and suggestion what might be the possible reason it is not getting archieved...
Is there any archival setting we have to maintin in BTE (Business Transaction Event) if it is yes then where and how we have to maintain.
Please give me some guideline to resolve this
Thanks & regards
Saifur Rahaman

Hi,
could you please check if you have read- and write-permission for the path which is mentioned in the
error message?
Further please check transaction DC20 and inform us which path you have maintained for your frontend type?
Additionally please go to transaction DC30 and verify if you have maintained the parameter %AUTO% for workstation application PDF. If you have maintained this value the control is normally handed over to your operating system (e.g. Windows). In this case please check also the Windows folder options for file format PDF. For this, go to 'Start -> Settings -> Control Panel' and select folder 'Folder Options', highlight extension 'PDF' under tab 'File types', click button 'Advanced' and check whether the correct paths are maintained for the relevant actions (e.g. open or print).
Best regards,
Christoph
P.S.: Give points if useful

Document not getting attached in SC and Bid Invitations

documents and attachments are not getting uploaded. There is an error shown "File path for attachment is invalid".
The docserver service(in SICF) is active. I have maintained a user of type communication(created in EBP) in docserver service.
Inspite of this documents are not being uploaded. Is there any other setting that needs to be done?
Amol

Amol,
Check you don't have blank or special characters in your file path. First try to keep it simple as "C:/mydoc.doc".
Regards.
Vadim

Complaint with reference to R/3 Billing Document , Items not getting copied

Hi,
I have implemented BADI CRM_COPY_BADI_EXTERN for pulling billing documnets which is working fine. But when I am creating a credit with refernece to billing doc fetched all other details are getting populated except Product, description into line item level.
I am using MAPPING_FOR_EXTERNAL_DOC for mapping R/3 values to Web UI fields. However CT_ORDERADM_I table in this method does not getting filled up with item level data as product , description etc.
I am populating the same and modifying the table in program. However it is not populating the value in Web UI fields.
Can anyone help as how should I populate item level values?
Thanks,
Madhura

Hi All,
I have a requirement to display the item details of complaint are created with reference of a billing document in Web UI.
When a Returns Split is created with reference to a billing document, the item is split into multiple items based on the quantity in the source document. The BAdI definition CRM_COPY_BADI_EXTERN which we implemented for this requirement. This works fine in SAP GUI but i need to replicate the same in Web UI.
I have implemented the BAdI definition CRM_COPY_BADI_EXTERN in read_data method, check_split_change_alv method is actually spliting the line items based on the quantity. In SAP GUI its works fine but it’s not working in web UI.
We used a FM CRM_INTLAY_GET_HEADER_GUID to retrieve the header guid when there is call from web UI. But this FM returns zero value for guid. I’m struck up at this point.
Please suggest how can i replicate the return split in webui too.
Thanks,
Deepak

Backend document number not getting updated

Hi ,
Shopping cart is not getting updated with backend document number in follow on document section
I am getting graphic display but no backned doc number
I am on EBP 5.0
Has anybody come acroos such issue any solution?
Thanks in advance
Diwakar

HI Diwakar,
Check in table BBP_DOCUMENT_TAB if any follown on document available wrt to SC...
also you can do one thing...open SC in BBP_PD transaction...select line item & check for Follow-On Document Object ID in Backend in table BBP_PDBEI...
also meka esute that this document is created in R/3..if follow on document is available in R/3 then it's a problem with BBP_GET_STATUS_2..
Let me know ur findings..
BR
Bharat M

Bom item data - Document assignment not getting saved in table STPO

Dear All,
              As per out customer requirement, they want to display assigned drawing documents of Bom items in CS11. But it is not reflecting in cs11 eventhough we have assigned documents in Bom item detail overview Document assignment tab page. Moreover this is not getting saved in table STPO.
               Waiting for solutions
Thanks & Regards
Dhananjay Kulkarni

Please understand my customers requirement,
                           Presently they are assigning drawing document of each mat in material master. And if they want to see the drawing of each component of bom through Bom maintenance then they double click on component in bom, goes to mat master then additional data then document data and then drawing. In this way they need to open minimim 5 windows, which they want to make minimum 2 windows.
          In bom they are having more than 300 components. This is not possible to define document as component with item category D of so many components. One more idea I given to them is to club all drawings in one document and define that document as component with item category D, but in this way they can't identify the individual drawing with part name.
          One more idea I given to them is to assign drawing document of individual component in item overview - Document assignment tab page from where they can open the drawing but it needs to open minimum 3 windows. So they are ready to assign drawing document in item overview - Document assignment tab page but they want, it should reflect in CS11 document column, from where they can easily open the drawing document.
          One more thing I observed that, assigned document to item overview - Document assignment tab page is not getting saved in Table STPO. I can't see this field content in STPO, which may be the reason that it is not reflecting in CS11.
         Is anything missing from Document management system?
Please think and reply friends it's Urgent.
Thanks & Warm Regards
Dhananjay Kulkarni

Not getting attachment emails on my 5c

I'm not getting emails with attachments on my 5c. all other emails i get them fine. do you know if I need to work on the settings? went to Verizon yesterday and they suggested to go to apple.

Just had to deal with this problem - once you do a factory restore make sure you do not add iCloud back (or if you do add it back make sure you do NOT sync contacts). If you do a sync with your iTunes it can add the old settings right back though so make sure to set it up with iTunes as a new device after the restore.

Oracle Fusion Middleware 11G B2B Document Type not getting Identified

Hello,
I have installed Oracle Fusion Middleware 11g on my local machine and created a custom document type with proper .xsd definition and XPath Expression Identifier in Oracle B2B interface and configured its trading partners ( Host & Remote ) along with an agreement between the partners.
I have also configured the host listening channel of Generic-File type which picks xml files from my c:\orclsrvs_in folder.
My problem is that the moment I drop any sample file in the expected directory, it gets picked up from B2B , but there isn't any record of the same under Reports and Metrics links.
The Business message, Application message and Conversation message tabs are also not showing any information about the record picked, but in wire message tab, the record is shown in PROCESSING state.
I am not able to conclude whats wrong behind this.. where can i track the logs for the same ??
kindly help to resolve this issue.
Thanks & Regards
Hiteshkumar Chaudhary

Hi Hitesh,
i came to know that B2B extracts the TP name from the filename itselfYes, in case of Generic File, Generic SFTP and Generic FTP, file name provides the necessary values to Oracle B2B to identify the Trading Partner. You can define your own file name format in the Delivery Channel under Transport Protocol Parameters in field "Filename format" (It's an optional field but it is always good to define your own format, otherwise B2B will take it's default format - TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml ). Following Filename formats can be used -
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
These file name formats can be used in any combination; for example,
%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
Note - Any file extension is allowed.
what are the system parameters to be set in weblogic console and how?? This activity is part of the pre and post installation steps. If you have done those without getting any errors then nothing else is required.
how shall I reinstall XEngine properly ??XEngine is part of B2B installation. If B2B gets installed without flashing any errors then we assume that other components of this part has installed properly.
Regards,
Anuj
Edited by: Anuj Dwivedi, Infosys on Aug 28, 2009 5:51 PM

B2B Custom Document Type not getting identified

Hello,
I have installed Oracle Fusion Middleware 11g on my local machine and created a custom document type with proper .xsd definition and XPath Expression Identifier in Oracle B2B interface and configured its trading partners ( Host & Remote ) along with an agreement between the partners.
I have also configured the host listening channel of Generic-File type which picks xml files from my c:\orclsrvs_in folder.
My problem is that the moment I drop any sample file in the expected directory, it gets picked up from B2B , but there isn't any record of the same under Reports and Metrics links.
The Business message, Application message and Conversation message tabs are also not showing any information about the record picked, but in wire message tab, the record is shown in PROCESSING state.
I am not able to conclude whats wrong behind this.. where can i track the logs for the same ??
kindly help to resolve this issue.
Thanks & Regards
Hiteshkumar Chaudhary

Hi Hitesh,
i came to know that B2B extracts the TP name from the filename itselfYes, in case of Generic File, Generic SFTP and Generic FTP, file name provides the necessary values to Oracle B2B to identify the Trading Partner. You can define your own file name format in the Delivery Channel under Transport Protocol Parameters in field "Filename format" (It's an optional field but it is always good to define your own format, otherwise B2B will take it's default format - TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml ). Following Filename formats can be used -
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
These file name formats can be used in any combination; for example,
%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
Note - Any file extension is allowed.
what are the system parameters to be set in weblogic console and how?? This activity is part of the pre and post installation steps. If you have done those without getting any errors then nothing else is required.
how shall I reinstall XEngine properly ??XEngine is part of B2B installation. If B2B gets installed without flashing any errors then we assume that other components of this part has installed properly.
Regards,
Anuj
Edited by: Anuj Dwivedi, Infosys on Aug 28, 2009 5:51 PM

Third party sales COPA document is not getting generated for MIGO

Hi
Kindly help to resolve the following.
Third Party Sale Scenario
While doing to MIGO accounting document and controlling document is getting generated, but not generating COPA document.
In KEI2 and KE4IM assignments are maitained for condition type and value field.
For SD the COPA document is getting generated.
Kindly help to resolve.
Thanks n Regards
N Sathish Kumar

If you have created new GL Accounts to map the Third party scenario, the pre-requesite is that you might need to create cost elemenet with category 11 or 12.
Further only assignments are condition types assigned to value fields.
Check if the billing type is reset under TCode KE4W.

Document flow not getting updated

Dear Experts,
I am facing a problem in document flow.
I create order (for free goods order type ZFRE), do delivery and finally billing.Outbound delivery is showing as "Being Processed".While I have maintained "Update document flow" in item level in copy control.
For your information, this is free goods order type and the system has been configured in such a way that accounting docs are not generated after billing. (As it is for free goods.).Could this be because accounting docs are not being generated?
Kindly advise.
Regards,
Randhir

Hi
Pls see the copy control sales document to sales document T.Code VTAA
Go to the item category and see the document flow field is activated or not if is not activated pls activate and re run the scenario
pls check your correct defined Z item category the document flow is activated or not.
Thanks.
Vasu
Edited by: Vasu Enaguthi on Apr 8, 2010 12:09 PM

Multiple Number Ranges for AP Document Type not getting triggered

Hi all,
We are posting receivables in the system using BAPI_CTRACDOCUMENT_CREATE. We have huge data of 3.9 million records for which receivables has to be posted. So multiple number ranges has been configured in the system for AP document type.
The issue is even though multiple number ranges for mass processing are configured in the below location in SPRO, none of them are getting triggered. The number range at the first level on the screen is only getting triggered, due to this it is taking lot of time to post documents. Any help on this?
Financial Accounting(new)
     Contracts Accounts Receivable and Payables
     BasicFunctions
     Postings and Documents
     Document
     Maintain Document Assignments
     Document Types
     Maintain Document Types and Assign Number Ranges
Regards,
Karthick.

Karthick:
Mass ranges are only used for FICA parallel mass activities. For your situation, you can define and assign multiple ranges for individual processing in the same IMG activity. Those would then be chosen for your mass postings.
regards,
bill.

Document is not getting attached to PO

Similar Messages

Maybe you are looking for