Document Output BID

Hi all
We're on EC 7.02 SP05
I'm trying to set up a scenario for the document output for RFx. I have a requirement that for a specific transaction type no document output should be issued/sent (send mail) to bidders.
I've tried to accomplish this using condition-dependent document output by setting "schedule condition" for Mail to be Transaction Type <> XXX
But the requirement is partially met as in RSPPFPROCESS the outputs are there (the ones with Transaction Type = XXX), but always process in Error (because of the condition). The others outputs for bids with transaction type <> XXX are processed ok.
With Event Control I couldn't achieve it. Is it possible?
What do you suggest? Should I implement badi BBP_OUTPUT_CHANGE_SF?
It may be easier than I think but I cannot see it.
Any ideas are welcome.
Thank you.

Hello Martin,
That is the standard behavior, the system always create your output medium.
The standard way to solve it is by handling the output adding some rules in customizing, but the un-sent outputs will be stored. There is no reason to delete them.
Regards,
SG

Similar Messages

  • SD Document  Output Preview Issue

    Hi Respected SD Seniors
    Please help on this output issue.
    I am trying to print my sales documents through STD output types. 
    Want to issue the sales document output to the screen (Preview) or Local network printer.
    Please share with me the functional & technical config steps.
    For example I am using AN00 (STD Quotation Output) for printing the customized quotation document. Every thing is set and I am able to
    Trigger the output successfully. But I can’t see it on my screen and not able to print in my local printer.
    After quotation saved, I can see the AN00 is in YELLOW.  And 2 Output device are exists (LOCAL, LP01)
    Please advice me the printing setup.  Where should I do change to configure my print preview or connect my local network printer as a default SAP R/3. printer
    Please help
    Regards
    Priyan

    Hi Kishore
    Thanks For your Quick Response.
    According to the STD setup of AN00
    Medium: 1
    Dispatch Time: 1 (By Periodic Job)
    Partner Function: SP
    Storage Mode: Print Only
    Condition record has been maintained and the output was triggered correctly upon saving the quotation document. (Process Status: Yellow)
    Then i selected the output and changed Dispatch time to 4 (Immediate). The process status becomes RED once the document is saved.
    Processing log is as follows
    Line1: Object 0000560015
    Line2: Output type: Quotation
    Line3: Processing log for program /SMB40/RVADOR01 routine ENTRY
    Line4: Processing routine ENTRY in program /SMB40/RVADOR01 does not exist
    What is it meaning of Line4: Program is RVADOR01 exists in SE38
    And Form /SMB40/SDQUO_A is existing in the SMARTFORMS transaction.
    And to link the local print to SAP (As an output device), should i need to contact basis or any specific place that i need to setup.
    Please Clarify
    Regards
    Priyan

  • Material Document output message type.

    Hi Experts
    Please advise the details to be maintained in MN23 for the below message type.
    Goods Issue Sub-con
    Material Document output message type.
    Trans./Event Type:
    Print Version:
    Print item:
    Debit/Credit Ind:
    Rgds
    MM

    SAP-MM1 wrote:
    Hi Experts
    >
    > Please advise the details to be maintained in MN23 for the below message type.
    >
    > Goods Issue Sub-con
    > Material Document output message type.
    >
    > Trans./Event Type:
    > Print Version:
    > Print item:
    > Debit/Credit Ind:
    >
    > Rgds
    > MM
    Hi,
    Trans./Event Type: WO(Goods Movement for Subcontracting)
    Print Version:1(Individual Slip)
    Print item:  3(GR/GI Slip for Subcontracting)

  • 4650dn printer changing document output from print preview

    recently installed 4650dn printer set up was a breeze, then suddenly the printer started changing the document output like there was an internal setting overriding the software settings.  almost as if it was confused about the orientation of the paper.  i am running vista with the print driver PCL 5.  i have tried restoring factory settings, tried different software, finally got it to work in MS word but prefer to use MS publisher, adobe illustrator etc.

    Hi Narasimhan,
    Yes, your guess is correct. We have tried out the possibility of controlling the print from the user status configuration side of things, but as the user status is at an Operation level, the system status at the header level still gets set, confusing the user that a print was created.
    Any other ideas / alternates ?
    Cheers,
    Ashok.

  • Define Actions for Document Output - Activate / link std. Interactive Forms

    Hello,
    The transactions 'Actions for Document Output' help tells me the following:
    If the processing type External Communication is used for document output using SAP Interactive Forms, the following configuration needs to be done:
    SRM Document (Action Profile)      Form Name            Format
    Purchase Order (BBP_PD_PO)      BBP_PO_ADB       BBP_PO_ADB_PRN
    The interactive forms are available in our SRM system. Still up on searching the forms for f.e. the Purchase Order definition it can not be found. Only smartforms are listed. How come?
    Has the setting in transaction 'PDF-based Forms for SAP ERP' -> 'Activate PDF-Based Forms' got anything to do with this?
    Kind regards,
    Tim

    Hi Jay,
    I tried searching for it where you should link the form with the BUS object.
    Following path (PO): Cross-Application Basic Settings -> Set Output Actions and Output Format ->  Define Actions for Document Output -> Action Profile: BBP_PD_PO -> Tab: Processing Types -> Smart Forms Print -> Search for Form doesn't include the Interactive forms.
    I just realised: I need to add a new entry 'External Communication', would this entry be applicable for all communication methods? Thus fax + print + e-mail? And how did you go about setting it up, i suppose adding an 'external communication' entry next to the smartform entries in the std. SAP BBP_PO would be double (system wouldn't know which 1 to choose).
    Kind regards,
    Tim

  • Billing document output needs to tigger for multiple emails.

    Hi Experts,
    We have a scenario wherein a single billing document output gets triggered for multiple emails. The requirement is to send the invoice layout copy to multiple emails where we maintain customer mail ids in customer master record.
    When tried ,we found option in customer master record and maintained multiple email ids to send the billing output.The system has considered first email id from customer master record and did not consider next mail ids from CMR. Could you please suggest how can we suffice this requirement .
    Thanks in advance.
    KV.

    Hi,
    Email Address is maintained in Table ADR6 against the address number of table BUT000 for a particaluar BP.
    If the custom code is used, following logic can be used:
    For multiple email address multiple entry will be there in ADR6 for the same address number. To send the correspondence to all email address, select all entries and concatenate them separated with semi-colon ( and pass the same to the email address field.
    This is working in our case where we are using a third party for creating and sending the PDF.
    Regards,
    Pranavjeet.

  • Condition Dependent Document Output

    Hello, all
    Please help me,
    We have extended classic scenario in SRM 5.0.
    May I to use Condition Dependent Document Output in Spro
    if  I need  to print 2 smartforms for one purchase order?
    Best regards,
    Guzal

    Hello, all
    I'm solved a question. I'm used the BADI BBP_OUTPUT_CHANGE_SF.
    Best regards,
    Guzal

  • Document Output determination config for MType 313

    Hi Gurus,
    Presently we are using STO (SLoc to SLoc, within same plant) for goods transfer.
    But now we want to use MType 313 (Remove from Storage) & 315 Place in SLoc.
    But we want the document output for MType 313. Can any one pls provide me the detail configuration steps to proceed? Quite urgent!
    Regards,
    Sachin Narvekar

    Hi
    SPRO->MM->Inventory Managment-> Print Control-> General Settings-> Item Print Indicator- > Maintain a value for 313
    SPRO->MM->Inventory Managment-> Print Control-> Maintain Print Indicator for GI/Transfer Posting Documents_> maintain the value configured for 313
    NACR -Create the Condition Record for the Output type WA01 or WA02 or WA03.
    using Transaction event type WA, Print Version 1 or 2 or 3 & Print item Configured for 313.
    Create the Goods issue with Print Item falgged & the message can be out put using T.code MB90.
    Thanks & Regards
    Kishore

  • Purchase Order and GR document Output Determination and creating own logo o

    Can anyone let me know the process of output determination of PO and GR documents.
    Also let me know the way to incorporate my own logo on the documents

    Hi sudip
    For the logo on documents, you have to take help of ABAP ppl.
    Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select: 
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    *4. Message Determination Schemas*
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
    Output of GR
    After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. 
    Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02

  • Delivery document Output Problem.

    Hello Gurus,
    I dont want to take the print ouot of delivery document if that delivery document is not PGI.
    Is there a standard config setting for this.
    Regards
    Prashant

    Hi
    Kindly go through the below path and assign the routine "1" against the condition type in the out put procedure
    Logistics Execution
    Shipping
      Basic Shipping Functions
       Output Control
         Output Determination 
          Maintain Output Determination for Outbound Deliveries
            Maintain Output Determination Procedure
    Regards
    Damu

  • Issue with Customizing Condition-Dependent Document Output

    Hello gurus!
    When we print a Bid Invitation on SRM menubar web "Output Control", Sap creates three new spool orders.
    The first contains the output format of our SmartForm ZBBP_BID INVITATION.
    The second contains the format of a external mail.
    And the third, contains both (the two previous orders in a single spool).
    We need to change some parameters to print smartform and to store email content in a two spools maximum. Further, in the future will have to change email body and subject, and print inmediatly in the local printer. We don't know how to do anything, although we have tried several things.
    What can we do? Any idea?
    Thank you in advance. Hugs!!

    Hello, all
    I'm solved a question. I'm used the BADI BBP_OUTPUT_CHANGE_SF.
    Best regards,
    Guzal

  • DMS document output in SOP report

    Hi all,
    I want to OUTPUT a DMS document in SOP Report template. But it is not reflecting in my SOP report  though I have fullfilled the prerequisites.Here are my steps that i carried out
    1)  I have linked the DMS doc. in a value assignment in user defined text.
    2) The DMS document type is SBV.
    3) The required document indicator tick is alos ensured in specify user defined text types in BASIC DATA & TOOLS in customizing.
    3)It is also ensured that the EHS <> DMS doc types are linked in customizing.
    4) I put the symbol in wwi report template under GESTDHEADE HEADER User-defined text .
    But when I run the preview (cg42) the space where I have assigned the symbol is blank.
    I even tried to put my required data in Long text in user defined text tab assigning REMARKS as user defined text type but there is no output in  REPORT when i carry out preview.
    Requesting your  comment what shall be the cause of this .
    Regards,
    Ashish pradhan

    Hello all
    the document type SBV should not be used or used only carefully regarding this. I recommend to use a customer specific document type. SBV is related to WWI report templates. Furthermore make sure that generation variant fits usage of data record in which you have set up the document which is located in the user defined text (Active indicator of usage must be set). I know cases in the area of access problemes so that the WWI could not retrieve the user defined document. PLease make sure that you have "checked" WWI layout without error (WWI Check).
    PLease check this:
    if you have uploaded e.g. an rtf file and created a value assignment and you have uploaded the document to be stored in the user defined text than the document is "there". That means: in this process the SAP EH&S process generate a new unique id which should show up in the user defined text (there somthing like this should show up: SBV WWI 0000111223 numbers...)
    Using this unique ID you can check if the document is really in DMS available. Furthermore depending on the EH&S release (support package etc.) you could check this. If you "click" with the mouse key on the unique id (refer above) the SAP EH&S system should upload directly to your client computer the document and start immediatly the corresponding application (e.g. word etc.) . In doing so you can check if the document is "really" there
    May be you need to check further DMS customizing. E.g. depending on the document you have used in upload there is a missing link to the "type" of document. .E.g. the EXCEL macro regarding standard SAP output variant links to I believe a seperate document type
    Hope that helps
    With best regards
    CB

  • SD Billing Document Output to email via external send

    Hi all,
    I hope you can helpt with following issue as I need to send invoices via email using the option 'external send' in the message determination. The settings are as follows:
    Message Determination VV32/VV33
    Output Type ZI04
    Billing Type ZIV
    Condition Record Sales Org / Billing Type / Payer
    Medium 5 - external send
    Dispatch Time 1, 3 or 4
    Cover Page Text: any text followed by invoice no. &VBRK-VBELN&
    Expectation
    With this setting we expect the billing document number to be included in the subject line of the email sent out.
    This works fine as long as you maintain the message in the billing document -> header -> output manually.
    Problem
    If you create a new invoice and the message is created automatically based on above Message Determination settings and you issue the output using any of these options
    - option 1 and report RSNAST00
    - option 3 using VF31 running in background mode or
    - option 4 issuing immediately,
    the document number is printed into the subject line but instead is printed the tempory document number $000000001. The correct billing document number is printed on the PDF form included in the mail output which confirms that the document number is available from the database at the point of output issue already.
    Any idea how to maintain the settings correctly to get the billing document number on the subject line of the email after creating a new invoice?
    Best regards
    Karsten

    Hi,
    I dont have ABAP skills, but ask your ABAP programmer, (or yourself), to find the point in the invoicing program that get internaly the invoice number.
    And you should try to asign the field from the internal temporary structure XVBRK-VBELN.
    Should be something like:
    Cover Page Text: any text followed by invoice no. &XVBRK--VBELN&
    Please confirm with someone that have technical skills.
    Regards,
    Demétrius
    Edited by: Demetrius Pereira de Miranda on Aug 20, 2008 4:21 PM

  • WebI document output

    Hi
    I have a question.
    Whenevr a WebI document is refreshed or run manually in InfoView, and saved on the repository, is there a way to get the output file from the server?
    Does  BO save a copy of the file anywhere on server?
    I dont want to schedule the report ans store the output/mail the output. This is a report with prompts and the user needs to change the values each time he/she runs the report and thus cannot be scheduled.
    This has to be on a manual basis.
    Please help. Please let me know if the question is unclear.
    Thanks in advance.

    Thank you Kuldeep for your response.
    But i guess this is not exactly what i am looking for.
    The scenario is, the user needs to inout the values for prompts, which you rightly said can be achieved via refresh on open option.
    Now after this report is saved, there can be 2 options, either just save it to repository(which would save the structure and the last refreshed report output). Or save it to the computer as a local copy(xls or pdf).
    We actually want to use this file as a parameter file for an ETL process and thus dont want it to save to personal computer as a lcoal copy.
    I want to know if the last refreshed report is saved somewhere on the BO server, or if it can be saved to some location? And what format would this report  be in? So that the output file can be taken from server and used as a parameter file for an ETL run.
    Thanks again

  • Change Document output

    Dear Experts,
    Am using the Change Document FM 'CHANGEDOCUMENT_READ' to fetch the changed fields in my application.
    The table is of structure CDRED and has F_OLD and F_NEW.
    I have to output only fields where the new value has changed from the Old value.
    Since both are of CHAR 254, for example, the amount field value is stored as 0.00 in the F_OLD and there is no value
    in the F_NEW generated by the FM.
    when i compare IF F_OLD ne F_NEW, still the record ouputs because F_OLD has 0.00 and F_NEW spaces.
    Also this is the issue with date values.
    MAJOR concern is the FM is outputting all record fields whose contents have not changed.
    I request if anyone can throw some light on this.
    Regards,
    Sampath
    Edited by: SampathKumarPilla on Nov 26, 2009 5:46 PM

    Halo Sampath,
    They why dont you check if F_NEW is initial .
    This might be  a problem if the user changes the value to None I suppose

Maybe you are looking for