Documentation on UCSD Service Provider Features

Im currently researching UCSD to build a deployment document and I cannot locate any details on the features that are available after enabling the Service Provider check box under [Administration > System > Advanced Controls > Enable Service Provider] checkbox
Ive enabled the feature and there are some obvious changes like MSP Organizations and Customer Organizations now replace groups.
I also noticed that there is a new Policy selection box on the vDC creation page for “Service Provider VDC” however I cannot locate any related configuration that would ultimately populate the dropdown.
Ive downloaded every document on the support site for UCSD and the only reference I can find is in the ucsd_rm_41.pdf (1.4 Release Notes) that basically outlines the existence of the feature checkbox. How can I obtain documentation on these features?
Thanks in advance
brock-

For each resource returned call openStream() to read the text file, and wrap the stream in an InputStreamReader and a BufferedReader.
Read them line by line. Check the line for a '#' character and, if found, discard it and anything following. Then trim the line. If the result is not empty it should be an FQN, which you then load using the same ClassLoader you did the getResources on.
Probably the best Classloader to use, in general is the one returned by Thread.currentThread().getContextClassloader().

Similar Messages

Reporting services integration feature not available in 2010 experience mode site collection.

I have a 2013 SP farm with SQL reporting services 2012 configured. When I create a site collection using the 2010 experience mode, I don't see the "Reporting Services Integration" feature under site collection features. However this feature is
available when I create a site collection in 2013 experience mode. Is there a way I can activate the "Reporting Services integration" feature in a site created in 2010 experience mode? I am not able to activate the feature on a 2010 experience mode
site collection using PowerShell either.

Hi，
From your description, When you create a site collection using the 2010 experience mode, the "Reporting Services Integration" feature is missed. However this feature is available when you create a site collection in 2013 experience mode.
For your issue, whether your 2010 experience mode site collection is in the same web application with the 2013 mode site collection. if not, make sure the web application which contains the 2010 site collecction have been
enabled ssrs service,
Go to CA->Application Management->Manage web applications-Choose the web application->Click Service Connections->Check SSRS, refer to the screenshot:
Besides, I suggest you create a new 2010 mode site collection with the same tempalte and the same web application with 2013 mode site collection, compare the results.
Also you can upgrade you 2010 mode site collection to the 2013 mode and compare the results.
Hope it helps.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

ABAP calling web service provided by AXIS -error

Hello expert,
I am calling web service provided by AXIS in ABAP but error occur when processing response part.
The web service is used to create material master in JAVA AXIS system.
After setting up the LP in soamanager then make a call, we got an error saying
"GENERAL_ERROR Error duing proxy processing (PART
UNKNOWN (NULL) ) "
I looked at the full trace in soamanger, the call is executed successful, and the data are inserted in the remote system.
response payload can be seen in the trace
Request payload
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Header><n0:Trace xmlns:n0="http://www.sap.com/webas/630/soap/features/runtime/tracing/"><n0:TraceLevel>Full</n0:TraceLevel><n0:TraceContext><TRC_PATTERN>WSTEST</TRC_PATTERN><TRC_KEY>E08673F6795E2EF1A482D48564570FA4</TRC_KEY><TRC_SSID>ED1_00</TRC_SSID><TRC_USER>CAILIN</TRC_USER><TRC_TS>20110525020904</TRC_TS><TRC_COUNTER>98</TRC_COUNTER><TRC_EXTERN></TRC_EXTERN></n0:TraceContext></n0:Trace><n1:MessageID xmlns:n1="http://schemas.xmlsoap.org/ws/2004/08/addressing">uuid:e08673f6-795e-30f1-a482-d48564570fa4</n1:MessageID><n2:Action soap-env:mustUnderstand="1" xmlns:n2="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope">http://eam.envisioncn.com:8180/msgagent/services/SAPService/CreateITEM</n2:Action><n3:To soap-env:mustUnderstand="1" xmlns:n3="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope">http://eam.envisioncn.com:8180/msgagent/services/SAPService</n3:To><wsa:From xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"><wsa:Address>http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</wsa:Address></wsa:From><wsa:ReplyTo xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"><wsa:Address>http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</wsa:Address></wsa:ReplyTo><wsa:FaultTo xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"><wsa:Address>http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</wsa:Address></wsa:FaultTo></soap-env:Header><soap-env:Body><n0:CreateITEM xmlns:n0="http://sap.env" xmlns:prx="urn:sap.com:proxy:ED1:/1SAI/TXS40FB8A9F499B60E81B2F:700:2010/10/07" xmlns:n1="http://eam.envisioncn.com:8180/msgagent/services/SAPService"><n1:itemnum>123</n1:itemnum><n1:description>u6D4Bu8BD5u7269u6599</n1:description><n1:issueunit>EA</n1:issueunit><n1:env_model>u89C4u683C1</n1:env_model><n1:env_ordernum>1</n1:env_ordernum><n1:istool>Y</n1:istool></n0:CreateITEM></soap-env:Body></soap-env:Envelope>
Response Payload
<?xml version="1.0" encoding="utf-8"?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soapenv:Body><CreateITEMResponse xmlns="http://sap.env"><CreateITEMReturn>S</CreateITEMReturn></CreateITEMResponse></soapenv:Body></soapenv:Envelope>
For me it looks it is an issue in the response payload that ABAP proxy can not process it.
such as, the response payload NS prefix is soapenv, other than soap-env in request payload...
but i am not sure, whether this is the root cause.
Could you help me to find out what is going wrong here?
Regards,
Cai Lin
Edited by: charlie cai on May 25, 2011 5:20 AM
Edited by: charlie cai on May 25, 2011 5:20 AM

the response payload NS prefix is soapenv, other than soap-env in request payload
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" is equivalent to xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/" . Namespace defined correctly.
I can also see that response is correct (assuming "S" denote success):
<CreateITEMReturn>S</CreateITEMReturn>
Also check type of WSDL style usually this error occurs if you are using RPC/Encoded style WSDL, modify wsdl for Document/Literal style (as RPC style WSDL not supported by ABAP proxy), see this discussion here: Cleint Proxy error
Refer to note: 1358647
Regards,
Gourav

Federation using weblogic as an IDP and OIF as a SP(service Provider)

Hi,
I am facing some problem during SAML creation.
I am using weblogic as an Identity Provider and Oracle Identity federation (OIF) as a service Provider. The federation will be IDP(weblogic) initiated.
I have configured both sides , published metadata and exchanged.
Is there any out of box feature of weblogic by which we can use SAML after configuration only or we need to write a separate java code(Login page.jsp etc) in order to create login page and using the entire configuration which I made in weblogic.
I am using OIF as service provider . I have Exchanged metadata of OIF and weblogic as part of building trust between IDP and SP.
IF I had used OIF at both sides in that case my job would be pretty easy (cause OIF is specifically built for this purpose. But our requirement is different as I have to use weblogic as an IDP).
What URL I need to hit for SAML if there is out of box feature in weblogic for using SAML(after configuring everything in weblogic).
Thanks.
Piyush

Weblogic itself does not have an identity provisioning store, you will have to employ a provisioning mechanism.
-MD

Records management: Getting record GUID in Service Provider for Transactio

Hello,
I wan't to use a service provider for transaction (or may be reports) in a record.
I the called transaction (Z-transaction) I need the GUID of the record (from which this transaction was calle). Afterwards we want to add automatically a new document into the record.
Does anybody know, how to transfer (or receive) the ID of the record in our Z-transaction or z-report? Or are there any other techniques how to do this?
Many thanks for any advice,
Matthias

Hi Espen,
Basic searching for documents and records can be done via the organizer part of the screen. It's the left part of the screen with the role-based view and the history. Select the folder for eg records and open it. Select the record type you want to search on and right click on it adn select search. You then can to enter your parameters (attribute values) on which you want to search. Same for the documents.
The search you are reffering to is the generic search in which it's possible to search over multiple documenttypes at once. For this however you need to customize RM parts. In the registry for once you have to change some settings on the element type (sps) of the generic document search element (e.g SRM_SPS_GEN_DOCUMENT_DEMO in the service provider SRM_SP_GEN_DOCUMENT). These options are only available in the newer systems (e.g. Netweaver 4s). Not in SAP Enterprise 4.7. So for the generic search options you"ll need more indepth knowlegde on how to customize SAP RM.
There is a kind of howto on the generic search options on: http://service.sap.com/recordsmanagement in the media library under documentation called "How To Guide: Cross Search based on Property Unification" .
Hope this helps.
Best regards,
Tjalling-Jan Gerkema

Documentation URL in Services Registry.

Hi,
We are trying to use the Services Registry of SAP (in PI 7.1) for registering Services, however find a major challenge in terms of updating the documentation URL.
For Non SAP services we can update the same in the provider system and thus while registering the service the URL appears. However could not find a way to do the same for SAP services (custom as well as Enterprise Services). there was some help provided in note 1319742 which is not visible in SOAMANAGER for the ECC system that we have (6.0 EhP4), also the transaction 'WSDOCU_SERVER' did not help (service published without the documentation URL even after maintaing a URL).
Any help on this will be appreciated.
Regards,
Avishek.

check for this sap note 1120842 - Publish WS Documentation Link during Service Publication.
- julius

Database as Web Services Provider?

Hello!
Would you please forgive me my silly question but...
My customer has purchased and is using Oracle RDBMS 10g.
Now the customer wants the database to be accessible by web services clients.
The customer thinks that this can be done with already purchased RDBMS (without Oracle's Application Server). The customer cites Oracle: "Database as Web Services Provider: Database operations and data retrieval are executed through Web Services mechanisms" (http://www.oracle.com/technology/tech/webservices/database.html).
However, in my honest opinion the customer MUST install some web server. if the customer is especially insterested in Oracle's solutions, then it has to (additionally to already purchased RDBMS) buy either Oracle Application Server or WebLogic.
Who is right?
Sincerely Yours,
Michail

Michail,
For DB 10g, you are right - the solution is to use PL/SQL Web Services for which an OracleAS/OC4J server is essential.
For DB 11g, both you & your customer are right. In addition to the above like 10g, there is a new feature in 11g called Native XML DB Web Services within the DB which does not require any Web Server or AS. See http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28369/xdb_web_services.htm
HTH,
Yogesh

MPLS for Private WAN between 2 service provider

Hello All,
we are current running an MPLS network from service provider 1 across our Branch office network. we need moe redudnancy and are looking to add another MPLS cloud from service provider 2. How would we integrate service provider 2 onto the same Cisco routers due to the fact the only 1 BGP AS can run inside the router? Any info would be appreciated.

Hi vpollifrone
For this Scenario whereby we have a single router and already peered with one ISP on private AS and now need peering with another ISP on Public AS we can make use of the "local-as" feature provided we own a Public AS...
This way we can establish peering with the new ISP using the Public AS as the local AS in the neighbourship config and also reatain the existing peering with old ISP..What we need to make sure is that while sending update to the second ISP we replace the original private AS with the Public AS....
Below commands will be handy for same..
R5(config)#router bgp 64515
R5(config-router)#neighbor x.x.x.x local-as zzzz ?
no-prepend Do not prepend local-as to updates from ebgp peers
R5(config-router)#neighbor x.x.x.x local-as zzzz no
R5(config-router)#neighbor x.x.x.x local-as zzzz no-prepend ?
replace-as Replace real AS with local AS in the EBGP updates
R5(config-router)#neighbor x.x.x.x local-as zzzz no-prepend
R5(config-router)#neighbor x.x.x.x local-as zzzz no-prepend replace-as
You can refer the below very Useful Cisco Document for same
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t11/feature/guide/gtbgpdas.html
Hope this helps to answer your query.
Regards
Varma

CA Cryptographic service provider?

Hello,
I am planning to install Single tier Enterprise CA on a dedicated Windows 2008 R2 Server.
We still have Windows XP SP3 workstations and I have some questions about the "cryptography" options on the Certificate Authority installation wizard.
The "Select a cryptographic service provider (CSP)" -selection defaults to "rsa#microsoft software key storage provider". I'am not sure can I select it, or any of the "Cryptography Next Generation (CNG)"
providers (marked with #).
Does anyone have any information about which CSP I should select?
I believe Windows 2003 CA Defaults to "Microsoft Strong Cryptographic Provider" so thinking of selecting that to guarantee compatibility with Windows XP.
Any recommendations on "Key character lenght" and "Hash algorithm for signing certificates" are also very welcome.
Thanks
lakend

You should use the strongest provider (which provides additional features) that is supported by the operating system that runs CA service. In your case it is Microsoft Key Storage Provider. Do not use any legacy provider (strong or enhanced CSP). With Microsoft
KSP you have several options: xxx#Microsoft Key Storage Provider, where xxx -- is public key algorithm supported by the provider. Here you must select the algorithm that is supported by all certificates clients. Currently RSA is Internet PKI standard algorithm
which is supported by almost all certificate clients.
In other words, the most "safe" configuration is RSA#Microsoft Key Storage Provider, signature algorithm = "SHA1" and key length 2048. The following variations are possible without affecting many clients: change key length to 4096 (I don't see a big deal
here) and change to SHA256 signature algorithm. However, legacy clients (Windows XP and Windows Server 2003) may not work with this algorithm (they require updates to support SHA2 algorithms).
My weblog: http://en-us.sysadmins.lv
PowerShell PKI Module: http://pspki.codeplex.com
Check out new:
PowerShell FCIV tool.
Thanks Vadims for the solution and others for confirming.
Installing ca with:
CSP: Microsoft software key storage provider
Key length:2048
Hash algorithm for signing certificate: SHA1
CNG public key algorithm: RSA
Thanks
lakend

Service Provider Distinctive Ring Call Routing

I have the situation where I want to replace an old key switch with a UC500. The only outstanding issue I have is an inbound ring feature enabled by the provider. The way it works is the customer has 2 phone lines that are members of a service provider hunt group. When they dial the pilot the first line rings and if it is busy the second line rings, no big deal. The issue is that the published fax number is the second line in the hunt group. So if the call comes in directly to the fax number the service provider gives it a distinctive ring, this is currently how the customer knows not to answer the phone and let the fax machine get it. With a UC500 implementation I would like to make this all transparent to the user. So here is my question, is there a way to route the call to the fax machine based off the fact that it rings in with this funny tone from the provider?

Call routing is based on dial plan, not tones. Tones in the speechpath will be sent to the destination, but are not used to determine where the destination should be. Fax pass-through/relay is triggered by the fax tones (CNG) when they start to sync up over the speechpath. Inband ringtones will not trigger these features; they will simply be passed through like plain voice conversation.

Records Management - Service provider for HR

Hi,
I'm trying to create a service provider for HR, but i cant get i to work. I won't display in the RM browser.
I have read the documentation, and hopefully set the right parameters, but i still can't use it.
Any tips or tricks?
Espen

Found the answer - the documentation is wrong.
The documentation says that one should not enter a value in RFC destination if working on the same system.
This is incorrect - the value NONE has to be entered for RFC dest, same as for the other service provicers.

Does anybody know of an open source OCSP responder other than OpenCA or do you know of an ocspd service provider? services?

The OpenCA product in its current version has memory leaks and doesn't work with Cisco devices. We just need a small implementation that we can do ourselves either on RHEL or Windows Server or locate a service provider that can do OCSP. We're our own CA so we have that covered.

Hello, it seems that support is not aware of this blog post: http://blogs.adobe.com/crawlspace/2013/06/updatingupgrading-to-photoshop-cc-faq.html#video
Adobe decided to limit to Lion, each operating system they support means more quality assurance.
The APIs they used for video is not supported in Snow Leopard (I upgraded just for that)
Adding another one means more quality assurance, tests, detrimental to the new features.
If you are a creative cloud subscriber you can also install Photoshop CS6 that has a video module compatible with 10.6.8

About ADOBE Document Service provided by NetWeaver stack

Hi,
I need to know more abt ADOBE DOCUMENT SERVICE provided by Netweaver.
I want to get to know the ABC.... of this Service.
Any help or Guidence wud be Appreciated.
Thanks.
Jeet.

Hi Jeet,
see the following links:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/3df4614c60469b93f277b55b7809cc/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/3df4614c60469b93f277b55b7809cc/frameset.htm</a>
<a href="https://websmp203.sap-ag.de/adobe">https://websmp203.sap-ag.de/adobe</a> (goto Interactive Forms based on Adobe software -> Media Library -> Documentation)
Regards,
Claus

Installation failed because a required role service or feature could not be installed. WS 2008

Hi guys, i have a problem with a Server Windows 2008 SP1 Standar x86, when i tried to reinstall the role of WSUS 3.1 the ServerManager show this Error and i could install again the role.
Thanks for your help:
The Error of the event viewer is the nexT:
Log Name:      Setup
Source:        Microsoft-Windows-ServerManager
Date:          27/03/2009 05:53:21 p.m.
Event ID:      1617
Task Category: None
Level:         Error
Keywords:
User:          DOMAIN\Administrator
Computer:      SOOB.DOMAIN.COM
Description:
Installation failed. A restart is required.
Roles:
Web Server (IIS)
   Error: The server needs to be restarted to undo the changes.
Windows Server Update Services
   Error: Installation failed because a required role service or feature could not be installed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ServerManager" Guid="{8c474092-13e4-430e-9f06-5b60a529bf38}" />
    <EventID>1617</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2009-03-28T00:53:21.056Z" />
    <EventRecordID>23</EventRecordID>
    <Correlation />
    <Execution ProcessID="1100" ThreadID="2736" />
    <Channel>Setup</Channel>
    <Computer>SOOB.DOMAIN.COM</Computer>
    <Security UserID="S-1-5-21-696557799-1245526101-3093723089-500" />
</System>
<UserData>
    <EventXML xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="Event_NS">
      <message>
Roles:
Web Server (IIS)
   Error: The server needs to be restarted to undo the changes.
Windows Server Update Services
   Error: Installation failed because a required role service or feature could not be installed.
</message>
      <identifiers>WsusRole, WebServerRole, WebServerComponent, CommonHttpFeatures, StaticContent, DefaultDocument, Performance, DynamicContentCompression, ApplicationDevelopment, AspNetPages, InternetServiceApiExtensions, InternetServiceApiFilters, NetFxExtensibility, SecurityComponents, RequestFiltering, WindowsAuthentication, WebServerManagementTools, InternetInformationServices6ManagementCompatibility, InternetInformationServices6DatabaseCompatibility</identifiers>
    </EventXML>
</UserData>
</Event>
Alberto

The above suggestions did not resolve issue in my case;
I did the below to resolve this after lot of research and same worked for me in 3 servers;
1)
Disable UAC by Disabling the setting "User Account Control: Run all administrators in Admin Approval Mode", under Computer
Configuration\Policies\Windows Settings\Security Settings\Local Policies\Security Options. And reboot the server
2)
Remove all existing installed features of dotnet 3.5 and reboot the server
3)
Install Windows Process activation service using add features and reboot the server
4)      NowInstalled Web(IIS)
role features which resulted in successfull installation

SMS Service Provider for Unity Connection

Hello,
I am wondering if anyone has ever setup the SMS Message Notification feature within Unity Connectiona and if so, can you recommend the Service Provider that you used? I am having a hard time trying to find a provider for this feature.
Thanks in advance for any help you can provide.
Martin

I had a customer do it with Sprint. They charged a per-message rate (more if they had to relay it to another carrier) and added it to the customer's business account. They were *very* guarded about the server details relating to the setup of it though. Yeesh.
Please remember to rate helpful responses and identify helpful or correct answers.

Documentation on UCSD Service Provider Features

Similar Messages

Maybe you are looking for