Does a timeout exception will occur before every StuckThread Exception ?

Hi,
          What is the difference between weblogic.transaction.internal.TimedOutException and Stuck Thread exception.
          I found the following definitions for both the exceptions.
          Stuck Thread exception :
          WebLogic Server diagnoses a thread as stuck if it is continually working (not idle) for a set period of time. You can tune a server's thread detection behavior by changing the length of time before a thread is diagnosed as stuck, and by changing the frequency with which the server checks for stuck threads. (http://edocs.bea.com/wls/docs81/perform/WLSTuning.html#1125714)
          Timeout Seconds:
          The transaction timeout in seconds. If the transaction is still in the "active" state after this time (counting from begin()), it is automatically rolled back. Once the transaction moves on to the prepared state, however, this timeout parameter does not apply; the transaction is retried until all the resources are committed.(http://edocs.bea.com/wls/docs81/ConsoleHelp/domain_domain_config_jta.html)
          What is this "active" and "prepared" state ?
          And by default, the timeout-seconds is 30 seconds and StuckThread-seconds is 600 seconds. Does that mean that a timeout exception will occur before every StuckThread exception.
          It will be great if anyone can explain me this in detail.
          Thanks a lot in advance,
          Sudhir

Hi,
          yes you're timedOut will occur before you're Stuck Thread alert.
          For information stuck thread don't throw Exception: just an error log like:
          ####<7 avr. 2006 18 h 20 CEST> <Error> <WebLogicServer> <nemausac> <ProdCoreManagedServer1> <weblogic.health.CoreHealthMonitor> <<WLS Kernel>> <> <BEA-000337> <ExecuteThread: '20' for queue: 'weblogic.kernel.Default' has been busy for "1Â 114" seconds working on the request "cofidis.fwk.batch.EjbTraitementBatch_vab2xs_EOImpl", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
          but the thread continue to do process.
          Wich time out , you're transaction is rolledback and you're process continue to do his work But you've got an exception at the next access to a ressources managed in the transaction (sql queyr or try to commit....)
          The transaction is in active state after the begin() and prepared state between the first call (prepared()) in a two phase commit and the second phase (commit()).
          Hope i help you

Similar Messages

Events That Will Occur Before the 2.0 Upgrade Works for Everyone

1. Not only will Chinese Democracy by Guns N' Roses will be released, but there will actually be Democracy in China.
Go.
-Dominique
P.S. How bored am I?
EDIT: Oh, cool. It works. Nice timing, eh?

Events That Will Occur Before the 2.0 Upgrade Installs on My Computer
1. Dakota Fanning will die of old age.
-Dominique
P.S. Yeah. I'm awesome at recovery.

WebService Socket Timeout Exception before reaching timeout duration

Hi
My Server is Websphere Application Server 6.0.2.17
i got some times socket timeout exception before reach timeout duration. and also i have only default websphere settings for web service .
The exception is occurred in 19 seconds after hitting the service . i am not able to get the exact problem . because default timeout time is 300 seconds (i think like that)
Error Log
2/12/09 11:01:28:323 CET 00000f6a SystemOut O WebService Started --> Begin webservice method invocation (Method Name : getCustomerInfo(String cusID))
2/12/09 11:01:47:840 CET 00000f6d SystemOut Exception Occurred : java.net.SocketTimeoutException: Socket operation timed out before it could be completed
WebService Method Invocation Started time 11:01:28
WebService Timeout exception raised time 11:01:47
TimeoutDuration 00:00:19

Hi Mark,
with synchronous messages it is important to consider timeouts from each connection to be established. So soapUI-PI, then PI-BackendSystem plus anything that might be in between. If your timeout soapUI-PI is smaller than the following ones, you'll get that phenomenon. soapUI will cut the connection, but PI will hold it and maybe receive an answer from the backend. This answer will end up in the void, since the original requester (your soapUI) has already disconnected. But for PI, this will be OK and status "successful". PI does not control and monitor the client's connection.
In other words, the cancel of the connection is only performed for that same connection, it is not propagated to any subsequent connections.
Hope that I was clear enough,
Jörg

How to handle "The specified resource does not exist" exception while using entity group transactions to purge WADLogs table

Hi,
We have a requirement to purge the Azure WADLogs table on a periodic basis. We are achieving this by using Entity group transactions to delete the
records older than 15 days. The logic is like this.
bool recordDoesNotExistExceptionOccured = false;
CloudTable wadLogsTable = tableClient.GetTableReference(WADLogsTableName);
partitionKey = "0" + DateTime.UtcNow.AddDays(noOfDays).Ticks;
TableQuery<WadLogsEntity> buildQuery = new TableQuery<WadLogsEntity>().Where(
TableQuery.GenerateFilterCondition("PartitionKey",
QueryComparisons.LessThanOrEqual, partitionKey));
while (!recordDoesNotExistExceptionOccured)
IEnumerable<WadLogsEntity> result = wadLogsTable.ExecuteQuery(buildQuery).Take(1000);
//// Batch entity delete.
if (result != null && result.Count() > 0)
Dictionary<string, TableBatchOperation> batches = new Dictionary<string, TableBatchOperation>();
foreach (var entity in result)
TableOperation tableOperation = TableOperation.Delete(entity);
if (!batches.ContainsKey(entity.PartitionKey))
batches.Add(entity.PartitionKey, new TableBatchOperation());
// A Batch Operation allows a maximum 100 entities in the batch which must share the same PartitionKey.
if (batches[entity.PartitionKey].Count < 100)
batches[entity.PartitionKey].Add(tableOperation);
// Execute batches.
foreach (var batch in batches.Values)
try
await wadLogsTable.ExecuteBatchAsync(batch);
catch (Exception exception)
// Log exception here.
// Set flag.
if (exception.Message.Contains(ResourceDoesNotExist))
recordDoesNotExistExceptionOccured = true;
break;
else
break;
My questions are:
Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
Would this logic fail in any particular case?
How would this approach change if this code is in a worker which has multiple instances deployed?
I have come up with this code by referencing the solution given
here by Keith Murray.

Hi Nikhil,
Thanks for your posting!
I tested your and Keith's code on my side, every thing worked fine. And when result is null or "result.count()<0", the While() loop is break. I found you code had some logic to handle the error "ResourceDoesNotExist" .
It seems that the code worked fine. If you always occurred this error, I suggest you could debug your code and find which line of code throw the exception.
>> Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Base on my experience, we could use code (like the above logic code) and using the third party tool to delete the entities manually. In my opinion, I think the code is every efficient, it could be auto-run and save our workload.
>>Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
In you code, you used the "recordDoesNotExistExceptionOccured " as a flag to check whether the entity is null. It is a good choice. I had tried to deleted the log table entities, but I used the flag to check the result number.
For example, I planed the query result count is 100, if the number is lower than 100, I will set the flag as false, and break the while loop.
>>Would this logic fail in any particular case?
I think it shouldn't fail. But if the result is "0", your while loop will always run. It will never stop. I think you could add "recordDoesNotExistExceptionOccured
= true;" into your "else" block.
>>How would this approach change if this code is in a worker which has multiple instances deployed?
You don't change anything expect the "else" block. It would work fine on the worker role.
If any question about this issue, please let me know free.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Ejbload() on CMP with transaction = supports - why called before every method?

If an entity bean (CMP v2) has its transaction attrib "supports", why
when a client (ejb/servlet/jsp) calls its business methods does WLS
call ejbLoad() before every method call? Note that the calls do not
occur inside a transaction!
This is not intuitive to me. I would think that ejbLoad() would be
called once when the bean is activated and then all business methods would
access that data.
Note that if you put the entity bean behind a session bean with a
transaction attrib "Required", then the ejbLoad() gets called once no
matter how many business methods are called from the session bean.
This is (obivously) correct.
Why is this relevant? The latest java petstore demo essentially calls
EJBLocal's from jsp (via taglib's) - I guess no different from WLS
EJB to taglib product - where the fine grained getter methods are
called. From what I gather, this means that every one of the jsp
get methods results in a database read! This can't be right!
What am I missing? As above, if the entity bean has "supports"
and is called from a jsp, it appears that ejbLoad()/ejbStore()
would be called for every jsp taglib invocation.
Glenn

"Glenn R. Kronschnabl" wrote:
Rob,
Thanks for your reply. This implies that even EJBLocals with fine
grained getter methods should never be used outside a tx scope.Yes, unless you are using Read-Only entity beans which cache data for longer
periods of time.
Even
though you bypass the RMI semantics, you'll be killed by the local tx.
Which to me says that using EJB's from JSP (even via tags) is a bad
idea because each getter method will result in a database read/write,
(unless you go with a readonly EJB as you stated).
Accessing transactional entity beans via tags is probably a bit off. You
could start the tx in the JSP or the tag library, but I don't really like
that pattern much. I prefer making the tags more coarse-grained and having
the tags talk to a stateless session bean which in turn talks to the entity
beans.
>
Unfortunately, I've been seeing some threads on the net advocating
using EJBLocals with tx=supports because one of the most common
patterns has session beans (where you can specify your desired tx)
in front of entity beans (so you're set methods are protected via
the session bean tx),RIght, I think Required or Mandatory is a better choice for the entity beans
here.
but then you can use the EJBLocal (via tags)
on a JSP page (no tx) to view the data via fine grained getter
methods.Other than the performance issues, I dislike this because it exposes the
entity bean directly to the JSP. If I have to go through an interface (the
session bean) to access the entity bean, then I shouldn't have another route
to access the entity bean directly.
-- Rob
>
As you state, this is a disaster because each getter method
will run in a local tx, requiring a database read/write. Oouch!
Glenn
On Thu, 06 Dec 2001 17:08:07 -0600, Rob Woollen wrote:
First off, I wouldn't recommend that you ever run any EJB with the
'supports' transaction attribute. If you want transactional behavior
use Required, RequiresNew, or Mandatory. If you want to run in an
unspecified tx, use NotSupported or Never.
WLS runs entity beans with an unspecified tx in their own local tx.
That's why you see the reads and writes on the method call boundary.
Your scheme of only reading when the bean is activated could make the
bean's data out of sync with the underlying database. That's acceptable
in many cases, and that's why we have the Read-Only entity bean option.
It gives you exactly what you'd like.
-- Rob
"Glenn R. Kronschnabl" wrote:
If an entity bean (CMP v2) has its transaction attrib "supports", why
when a client (ejb/servlet/jsp) calls its business methods does WLS
call ejbLoad() before every method call? Note that the calls do
not occur inside a transaction!
This is not intuitive to me. I would think that ejbLoad() would be
called once when the bean is activated and then all business methods
would access that data.
Note that if you put the entity bean behind a session bean with a
transaction attrib "Required", then the ejbLoad() gets called once no
matter how many business methods are called from the session bean. This
is (obivously) correct.
Why is this relevant? The latest java petstore demo essentially calls
EJBLocal's from jsp (via taglib's) - I guess no different from WLS EJB
to taglib product - where the fine grained getter methods are called.
From what I gather, this means that every one of the jsp get methods
results in a database read! This can't be right! What am I missing? As
above, if the entity bean has "supports" and is called from a jsp, it
appears that ejbLoad()/ejbStore() would be called for every jsp taglib
invocation.
Glenn
AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
by Michael Girdley, Rob Woollen, and Sandra Emerson
http://learnWebLogic.com
[att1.html]

How does waveform graph downsamples the data before it is plotted

Hi,
I'm interested in how does waveform graph downsamples the data before it is plotted and what algorithm is used for this purpose? My goal is to plot 30 plots that have 1M samples each and I would like to downsample them before plotting onto a graph. I tried several VIs/algorithms for resampling and none of them gave the same result as seen by waveform graph (when all the samples are plotted).
For example, if only one sample of 1M samples is 1 and all others are 0, then after downsampling to 1k samples the sample is not visible on the graph anymore. However, if I plot all 1M samples directly onto the graph, then also this 1 sample is visible (see attached example).
Solved!
Go to Solution.
Attachments:
WFGDownsampling.vi ‏19 KB

Hi andrej,
LabVIEW draws plots in the way that draw every pixel affected by signal. So for example if there is zero-valued 1M samples and even one equals to 1, you will see the peak. That is the reason why you do not get the exactly same behavior comparing to interpolating. But if you set FIR as interpolation mode in Resample Waveforms (single shot).vi, result is really similar, but of course amplitude is 1000-times smaller than original one (because there is dt set to 1000). Keep also in mind that in Graph 2, there is different Y-scale and it should be considered as noise, not relevant data, I would expect 1000-times smaller amplitude as in Graph 3, it is many more times smaller.
I would also like to say something about downsampling (decimating) the data. If you have 1M samples, you can see the peak even that there is only one value. But bigger problem is that with this graph resolution (I guess that is not more than 1000px), it is problem to find position of this peak. It means that still the zoom is needed to know where the peak is. Usually, when there is that big set of data, you are extracting different data (statistical information, peaks in FFT, etc.) not just visual data in graph.
Mariaaa:
I do not understand your question, can you please describe more your needs? You mentioned saving the data into a file, you can use Write to Measurement File express VI or see Write to Text File.vi in Example Finder and try to appropriately modify it.
Best regards,
Martin

Bridge - "The file cannot store XMP metadata. No changes will occur"

I am trying to use keywords to organize all my projects. But on every file I try to apply a keyword too I get the message "The file cannot store XMP metadata. No changes will occur". I'm on windows 7 64bit with Creative Cloud and all the latest updates.

Not sure what kind of files you are trying to add keywords, but I am having the same problem with .MTS and m2ts files. I am running Bridge 4.0.0.529 and Win 8.1. I found a work around, which was to change the extension to .mpg in File Manager, then you can add keywords. However, not sure of the implications of doing this when I import them into Premiere. I noticed in File Manager that under file properties that the "Type of File" changes to reflect the file extension. Running some tests to try and find out. I suppose one could change the extensions back to the original. But if you have a lot of clips, that is a big hassle. Unfortunately, Bridge "Batch Rename" doesn't allow one to change the extension. Any help would be appreciated. However, I am not very optimistic in that it appears the "Cloud" version of Bridge has the same issues.

Milestone- Milestone trigger or a fixed date whatever occured before.

Hello every one,
I got a scenerio in my project where i have to create a milestones in project and thse milestones will go the project which is standard but now there is a condition like milestone should be triggeres either based on the completion of certain activity or a fixed date which ever is earlier.
In milestone we can remove the billing bock whenever that activity is confirmed but in case a certain date fall before can we make condition based on this date and completion of milestone which ever occur before.
Thanks in advance. Looking for some suggestions.
Regards
Abhishek Sinha

Yes, This can happen and this is standrad.
Milestone gets actual dates not only by activity confirmation, you can also enter it manually.So in case when you have not completed the activity to which the milestone has been attached but still you want to remove the billing block.In that case, dont confirm the activity, but enter the actual date for the mile stone.When the miletsone gets the actual date automatically billing block will get removed for the billing plan line.
In this case you can maintain a fixed date also, but system cannot prompt when you have to punch the actual date, you have to manually enter the actual date in the milestone, if the activity is not completed.For entering the actual date of milestone, the activity to which it is attached should be released.

Keyboard types a bracket before every word

My keyboard is typing a bracket before every word, when I hit space, for instance: hello ]how ]are ]you
HELP!!

rayceejay,
Welcome to Apple Discussions.
I would recommend doing a SMC Reset. The instructions are below but please read them carefully I can't tell exactly which MBP you have from your profile. There are various Mac models covered in these instructions ensure you use the correct one for your model MBP.
http://support.apple.com/kb/HT3964
If that doesn't do it, try a PRAM reset which is:
*PRAM RESET*
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Regards,
Roger

TS3694 I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at al

I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at all, and I really have no idea what to do. It is just a black screen, and occasionally the white apple will appear as if it were turning on, but it won't turn on. I just need some suggestions on what to do!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT4859 when you go to do this it say that your iPod or whichever device will no longer be backed up to the computer it is currently backed up to, what exactly does that mean? Will i not be able to sync my iPod from that computer?

when you go to do this it say that your iPod or whichever device will no longer be backed up to the computer it is currently backed up to, what exactly does that mean? Will i not be able to sync my iPod from that computer? Please help me and answer either or both question detailed thanks

Normally when you sync your device it is automatically backed up to your computer as the first step in the sync process. When you choose to start backing up your device to iCloud, iTunes stops automatically backing it up on your computer when you sync. That's what the message is telling your; that you are now backing up to iCloud and not to your computer each time you sync. You can still manually back up to your computer any time you want by going to the Summary tab and clicking on Back Up Now under Manually Back Up and Restore.
You can still sync your device as you did before, it just will no longer back up automatically when you do.

Sftdcc.exe does not timeout after closure of application launched via GP in kiosk mode.

We are configuring a group policy to launch an application upon login to the Remote Desktop Server.
The following group policy object is configured;
User Configuration\Policies\Administrative Templates\Windows Components/Remote Desktop Services/Remote Desktop Session Host/Remote Session Environment
By default, Remote Desktop Services sessions provide access to the full Windows desktop, unless otherwise specified with this setting, by the server administrator, or by the user
in configuring the client connection. Enabling this setting overrides the "Start Program" settings set by the server administrator or user. The Start menu and Windows Desktop are not displayed, and when the user exits the program the session is automatically
logged off.
Start a program on connection - Enabled
Program path and file name "C:\Program Files (x86)\Microsoft Application Virtualization Client\sfttray.exe" /launch "universe 1"
Working Directory
This has also been tested running Notepad.exe
The application launches successfully.
Upon exiting the application the App-V client shuts the application down successfully but the RDS session does not log the user out or end the RDS session. The sftdcc.exe process
does not timeout.
Using Task Manager to end the sftdcc.exe process initiates the logout process.
Is the following still valid for Server 2008 R2 and App-V v4.6 x64?
Can’t find any reference to it via;
http://technet.microsoft.com/en-us/library/dd464849.aspx
How To Deal With Microsoft App-V sftdcc.exe when Sessions are not closed properly After installing Microsoft App-V for terminal servers
users sessions are not closed properly after logoff. You can see through the Citrix Advanced Management Console that the session is in disconnected state and sftdcc.exe is running in the user session.
There are two registry keys you can set for this problem to disappear:
HKEY_LOCAL_MACHINE\Software\Softricity\SoftGrid Client\CurrentVersion\Configuration\
Value Name: DCCSeamlessTimeout
Type: REG_DWORD
String: 0
I have tried adding the DCCSeamlessTimeout to the HKLM\Software\Wow6432Node\Microsoft\Softgrid\4.5\Client\Configuration
but this does not have any effect.

Updates on this issue.
if you are running window server 2008 R2 install this hot fix:
KB2815716-v2-x64
then add this registry values:
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\SysProcs" /v sftdcc.exe /t REG_DWORD /d 0
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\SysProcs" /v splwow64.exe /t REG_DWORD /d 0
then reboot, and that will fix it.
if you are running 2012 r2, then only add the registry values and reboot.
Mohsen Almassud

Compiler warning: Source folder "server" does not exist and will be ignored

Hi,
i am using NWDS 7.0 SP16. I have a development component type "J2EE Sever Library", which uses a java component. Everything works fine, except during the build i get a warning "Warning: Source folder "server" does not exist and will be ignored.".
Then i created the folder named "server" manually, but the build finished again with warning, now saying:
"Warning: Source folder "server" exists but is empty and will be ignored."
I created a dummy-file in the directory "server" and now the compilation is fine, no warnings.
I like to get my build free of any warnings, so what's wrong here? I found no documentation to create the folder/file manually.
Any help is appreciated.
Regards,
Thomas

Hi Raman,
I am also getting the same error . i moved my srm transports from DEV to QA and replicated the datasources into BI . and then i moved the BW transports from dev to QA.
when i check the datasource it is pointing to D60 instead of Q60 . when i check the transformations getting the same error :
source system dosen't exist.
can you please let me know how you resolved this issue. your reply will be highly appreciated.
Regards,
Sri

This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.

hi friends ,
My report Fetch from the orcle database , we installed Oracle 10g and 11g - clent 32 -bit on win 2k8 -64 bit machine .while design time runing fine,but ofter depolyement im facing below issue.
In error has occurred during report processing. (rsProcessingAborted)
The execution failed for the shared data set 'abc'. (rsDataSetExecutionError)
Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
Any help is greatly appreciated, I have tried couple of solutions going through some threads online but no use and place dt tell install 1og r 11g 64-bit

Hi,
Based on the error message, we should confirm whether Oracle client tool has been installed on the Report Server at the beginning. If the Report Server installed is 64-bit, we should also install a 64-bit Oracle client tool on the Report Server. Besides, we
can also try to bypass tnsnames.ora file when connecting to Oracle by specifying all the information in the data source instead of using the TNS alias to connect
to the Oracle database. Please see the sample below:
Data Source=(DESCRIPTION=(CID=GTU_APP)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST= server01.mydomain.com)(PORT=1521)))(CONNECT_DATA=(SID=OracleDB)(SERVER=DEDICATED)));
Reference:http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/06/30/ora-12154-tns-could-not-resolve-the-connect-identifier-specified-error-while-creating-a-linked-server-to-oracle.aspx
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Does a timeout exception will occur before every StuckThread Exception ?

Similar Messages

Maybe you are looking for