Does applecare transfer to the second owner

does applecare transfer to the 2nd owner

Yes.
Under these conditions:
http://support.apple.com/kb/HT5693?viewlocale=en_US&locale=en_US

Similar Messages

  • When I change the configuration of my iPad apps (I organise them on the laptop, then sync) the arrangement does not transfer to the iPad.

    When I change the configuration of my iPad apps (I organise them on the laptop, then sync) the arrangement does not transfer to the iPad.

    Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
    http://support.apple.com/kb/HT1808
    Hope this helps
    - Greg

  • If i sell my iMac still under warranty can it transfer to the new owner

    hello can i transfer a warrenty from one owner to another? iwant to buy a computer and the guy states that i can renew the warrenty, but i talked to mac and they told me that its not transferably but also they were alil weary about my call like i was going to but a stolen mac. I was calling to comfirm how not to buy a stolen imac. thats what i am trying to buy . A new imac 27"   johnny   thanks

    If you are asking about AppleCare and if that is transferable, the answer is apparently yes for new purchases at this time (not sure if this same policy was in place when your computer was originally purchased):
    "With Transfer of Covered Equipment to New Owner. Subject to the restrictions set forth below, you may make a one-time permanent transfer of all of your rights under the Plan to another party, provided that: (a) the transfer includes the original Proof of Purchase, the Plan's Confirmation and all of the Plan's packaging material, including printed materials and these Terms and Conditions; (b) you notify Apple of the transfer by sending, faxing or e-mailing notice of transfer to Apple Inc., ATTN: Agreement Administration, MS: 217AC, 2511 Laguna Blvd, Elk Grove, CA 95758, U.S., fax number 916-405-3655 or [email protected], respectively; and (c) the party receiving the Plan accepts the Terms and Conditions of the Plan. When notifying Apple of the transfer of the Plan, you must provide the Plan Agreement Number, the serial number of the Covered Equipment being transferred and the name, address, telephone number and email address of the new owner."
    http://images.apple.com/legal/applecare/docs/081811_APP_English_NA_v5.4.pdf

  • When closing 2 windows(with multiple tabs each), system restore does not properly restore the second window's tabs. Is this a bug in the new update/any ideas to fix?

    I regularly use 2 windows with multiple tabs each and session restore would work to get them all back, but after this latest update the second window does not restore properly, with the first tab not visible on top(only in drop down menu) and the add a tab button now on the left(instead of right). The add a tab button is not really concerning other than it indicates other problems with the tabs on tab of the 2nd window. Not having the 1st tab visible is frustrating, because I can not move it or as easily navigate. Also, the tabs on top of the 2nd window that are visible no longer have the "x" to close visible unless that tab is selected. I'm assuming this is a problem with the new release/update, since this is the first time I've ever encountered the problem, and I've shut down and restored Firefox a few times to make sure this was a recurring problem and not a one-time deal. Any ideas on how to fix would be welcome(other than perhaps cramming my tabs onto one window or sucking it up XD).

    Hi,
    You can try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' in the [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen.
    If the problem persists, please try a [https://support.mozilla.org/en-US/kb/Managing-profiles?s=profile&r=0&e=sph&as=s new profile]. You can later copy [https://support.mozilla.org/en-US/kb/Backing%20up%20your%20information?s=backup&r=1&e=sph&as=s needed data] from the old profile to this.
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]

  • HT4111 I have an IPAD updated with iSO 7. Recently I purchased a logitech wireless keyboard and I went to pair the two up and the IPAD shows that the keyboard is paired or connected but when I type using the keyboard it does not transfer to the pad scene.

    I have an IPAD updated with iSo 7. Recently I purchased a logitech wireless keyboard.
    I went to pair the two up and the IPAD recognizes the keyboard and cites that it is connected.
    But I proceed to type the words do not transfer to the screen.
    Any suggestions? Techs at Best Buy state that the iSO 7 is not yet compatible with the keyboard manufacturers?
    How long before they are?

    The BestBuy guys are clueless.  I use a Logitech BT Tablet keyboard with my iPad 4 - used it before with iOS 6 and use it now with iOS 7 and it works just fine.
    A simply thing to try is to remove the BT pairing, reset your iPad (hold the on/off/sleep button and the home button at the same time until the Apple boot logo appears), then try repairing them.  You may have to force the keyboard back into pairing mode (on mine, there is a button on the underside, near the on/off switch, that I would press and hold for second or two to force pairing mode).

  • List view GroupBy pagination does not work for the second group?

    Hi,
    I have defined view for list with grouping by 2 fields. I noticed the paging works only for the first grouping, for the second field there are always all items on the page. How could I configure it to provide paging also for the second level of grouping?
    If it is possible to have paging for only one group level, I would like to change it for the second 2 (as there are only like 15 groups for the first level but there could be hundreds for the second one).
    Thanks!
    eXavier

    Here is the query:
    <View Name="{3BEA03A1-FBFF-4364-AA0F-AD4E48093479}" MobileView="TRUE" Type="HTML" DisplayName="aaaa" Url="/Lists/X/aaa.aspx" Level="1" BaseViewID="5" ContentTypeID="0x" ImageUrl="/_layouts/15/images/generic.png?rev=23">
     <Query>
      <GroupBy Collapse="TRUE" GroupLimit="30">
       <FieldRef Name="SC_UserName" />
       <FieldRef Name="SC_Year" Ascending="FALSE" />
      </GroupBy>
      <OrderBy>
       <FieldRef Name="SC_Date" Ascending="FALSE" />
       <FieldRef Name="SC_Date" Ascending="FALSE" />
      </OrderBy>
     </Query>
     <ViewFields>
      <FieldRef Name="ID" />
      <FieldRef Name="SC_DateX" />
      <FieldRef Name="LinkTitle" />
      <FieldRef Name="SC_Date" />
      <FieldRef Name="SC_UserName" />
      <FieldRef Name="SC_DateY" />
      <FieldRef Name="SC_Status" />
     </ViewFields>
     <RowLimit Paged="TRUE">30</RowLimit>
     <Aggregations Value="Off" />
    </View>
    eXavier

  • HT4976 I have followed instructions to include a second keyboard for emoticons while texting on my Ipad. It does not bring out the second keyboard nor the "globe" to be typed????

    Caan someon help me find the way to be able to see the second keyboard on my texting while using Ipad?
    I have followed instructions and so I have open a second keyboard for emoticons but the "globe" would not show and therefore the emoticons would not appear.

    i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
    do a true clean install
    reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
    at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
    exit disk utlity
    at menu, choose install OSX
    this time, when it asks for a password just hit continue, it will let you complete without a password
    you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

  • Does anyone know what the second button is for on the logic board of an iMac G5 (PPC), 1st generation ?

    One button on the logic board of a 1st generation iMac G5 (PPC) is an alternate power button. Does anyone know what the purpose of the other button is?

    I am far from certain but I believe it is the power management unit (PMU) reset switch a/k/a Cuda switch: http://support.apple.com/kb/HT1939
    Do not press it when the computer is on.

  • Photoshop Elements does not start for the second time

    Hello,
    our customer has problem with PS Elements 12. He can start it for the first time and everything works fine. But when he closes the program and tries to start it again, it will not start. It doesnt even say anything. No error mesages or anything. He tried to instal a trial version of PS E 13 and it does the same thing.
    He's running Win 7 SP1 64 bit
    Any sugestions? Thank you.

    Hi,
    It has been known that the Welcome screen sometimes fails to close properly and prevents a second load.
    Most people have overcome the problem by creating a shortcut direct to the two main applications.
    Organizer: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
    Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
    Brian

  • After choosing a jpg for upload, the "Upload File" button on the organization's receiving site of does not respond. The second problem: it's impossible to highlight more that one file at a time.

    Clicking the first file, holding down shift and clicking the last file doesn't work. I've tried all manner of command, control, shift combos without success.  This one-at-a-time attachment problem also happens in web mail.  Are these two issues related?  Thanks for non-techie solutions for both issues.  I have Safari 5.0.6 (5533.22.3) and Leopard.

    Thanks for your response.  I do have javascript turned on (not java).  To answer your question,
    I was trying to upload 3 jpgs to the submissions page of a visual arts website. I could only highlight one jpg at a time in the "Choose File" option, and then the "Upload File" button of the submissions page would not respond.
    It's an ongoing problem with this site (I'm the only one with this issue and there are a lot of submissions). I have to send the images as email attachements to the administrator of the site.  When doing this via webmail, I still the one attachment at a time problem, but the images get to the administrator.  Thanks for helping.

  • Script does not work on the second page

    Hi, I believe it's just a little problem:
    I use the following script( I just copied a part of it, so don't care
    about missing brackets etc.)
    to automatically fill some text field according to the selection in a drop-down field:
    switch (xfa.event.newText) {
    case "8 8x1":
    berstdruck.rawValue = "≥65";
    htberst.rawValue = "≥20";
    maxflex.rawValue = "≥34";
    deflect.rawValue = "≥6";
    flexforce.rawValue = "≤44";
    minbend.rawValue = "≤40";
    permeation.rawValue = "≤2";
    length1.rawValue = "-1,5...+1,5"; remark:these fields are on page 2
    length2.rawValue = "-1,2...+1,2"; remark:these fields are on page 2
    break;
    The last two fields on page 2 of
    my document are not filled automatically.
    The others work well.
    Can somebody help?
    Thanks
    Alex

    You'll need to fully qualify the fields that are on other pages. The reason for this is these fields are not underneath the same parent in the XML DOM as where you're script is running (the drop-down). So it does not find the fields on the other pages and doesn't know where to look for them.
    A fully qualified SOM expression would look something like this:
    xfa.form.formName.pageName.subFormOnThePageNameIfExists.fieldName
    H.

  • HT201269 How can I backup all my email messages from my ipad2 to my mac. iTunes does not transfer all the sent / received mail.

    Hi,
    I damaged my ipad and saved a backup using iTunes while it was away for repair.
    I used another ipad while it was away, but none of my email messages sent or received had been saved.
    How do I backup my email ?

    hi, not totally, as when the N8 died, the shop here in France couldn't really do much to help and more like didn't want to do much to help, and transferred what data was available from the sim to the mini sim on the apple. Now looking in depth, Windows Contact is an 'orrible application that is not very easy to handle (Windows Address Book is no longer available for anything above Vista and is all tied into Windows Live and things to do with Hotmail and Messenger..... Gatesy is trying to dominate things again..... WOZ HELP!!)
    Sony have worked alongside Apple for a long time, so with a new 12/2012 Experia smartphone, the transfer details are a doddle, but now that Nokia has succombed to being part of the Dark Side (MS) and offering windows phones only, I can understand the retiscence of our late leader and his "heavenly crew" of having to deal with the Dark Side

  • MiFi: Does data transfer within the home network count as data usage

    I want to use a MiFi with a wireless surveillance system, which can record 100s of GBs of video per month. If I send video to a PC all on the same network, does that count as data usage?

    Traffic sent over the local network will not be counted against your MiFi/data plan.  VZW charges for all traffic that is sent over thier wireless infrastructure/towers.  If this your question is then that is the answer.
    With that being said:
    You can setup your cameras and disconnect the MiFi from the VZW network.  There is a Disconnect button on the main page of the router admin page that allows you to do it.  This would enable you to maintain the local network and confirm that the security system will work offline.  After you confirm your camera to computer network is working you can reconnect it to VZW and see if you can access the computer / camera over the web. 
    As a local router the MiFi will perform just fine with your cameras and computers.  There are certainly better routers you can purchase for that function but thats another subject.  Its when you try to make your devices available over the internet where most people have problems.  Since the MiFi is a 4G capabile device it is tied into the new SIM card and NAT network.  In most cases public IP addresses are not assigned or accessible on the MiFi.  This makes it very difficult to get through to your devices from a remote location (as I assume you want to do).  Most users on this forum have not found a way around it other than reverting back to an older model like the MiFi 2200.

  • I have both my iPhone and iPad backing up via iCloud, but they are not sharing the information between devices ie if I purchase an app on one it does not transfer to the other although the backup is successful via iCloud.

    I have both my iPhone and iPad backing up via iCloud but the data is not being shared between the devices. When I backup it appears to be working as there are no error messages but the data is not shared between each. Any help would be great as this is very frustrating.

    Backing up to icloud is not the same as syncing data between devices.  Go to
    Settings>Store.  Turn on the automatic downloads that you want on that screen.
    Settings>iCloud.  Turn on the features you want to sync between devices.

  • LOV does not get invoked the second time

    Hi
    I'm using JSF-ADF-BC with JDeveloper 10.1.3.1
    I've been following the Hands-on Practices from Oracle JDeveloper 10g for Forms and PL/SQL Developers.
    I have an edit page which invokes a LOV page. The first time I click on the flashlight (af:SelectInputText) it invokes the LOV and returns the value I've selected
    correctly. Thereafter if I click on the flashlight, there is no server activity. It seems like i've disabled this component somewhere after the first invocation.
    I have 2 LOV's that I invoke and both work the first time only.
    Please Help!
    Regards
    Kes

    Hi All
    This problem is now resolved.
    It would seem like there a spyware which was resident in my registry might have been the cause of the problem.
    Regards
    Kes

Maybe you are looking for