Does Portege R700 support new high speed Port Replicator 2 PA3916E-1PRC

Will the new high speed Port Replicator 2 fit my R700?
It lists it as only compatible with the R830 series.
However the old R700 replicator works with the R830, so i kind of figured the new slimline effort would work with the R700 as well??
Anyone tried/know this?
Old one: PA3838D-1PRP
New one: PA3916E-1PRC
cheers
Ben

Hi
I found an info about Toshiba Hi-Speed Port Replicator II on the Toshiba Canada website:
http://www.toshiba.ca/web/product.grp?lg=en&section=1&group=2&product=11250
The Toshiba Hi-Speed Port Replicator II is compatible with:
Tecra R700, R940, R950, Portege R830, R930
Notes:
1. Speeds may vary
2. Ports supported may vary with notebook model; When notebook is connected to port replicator, it is recommended not to use the ports on the notebook
3. Dual VGA and HDMI display capability depends on notebook model
4. Gigabit Ethernet support only if notebook supports it

Similar Messages

Portege R930-1D0 + High speed port replicator II - dual monitor support

Hi
Running a Portege R930-1d0 through High speed port replicatior II.
Is it possible to output to dual displays?
Thanks

>So if I connect one monitor via VGA and another via display port I should get output to both monitors?
Well, usually it should be possible to use two external monitor simultaneously.
But Im not quite sure about the VGA/Display port combination because the VGA port supports analogue signal and the HDMI / Display port supports digital output.
However, it worth a check
Otherwise you could try to connect one monitor directly to the notebook and the other to port replicator.

Portege R700-14J - Compatible with Express Port Replicator II?

Today I received my TOSHIBA Express Port Replicator II (PA3680E-1PRP) to be used with my TOSHIBA Portege R700-14J (PT311E-023006DU). I seem to be unable to fit the notebook easily into the docking station.
Please let me knwo whether this port replicator docking station is *the right model* for the Portege R700-14J.
Thank you
Bert van Loon

Hi mostlymedia,
I have a little bit searched using Google and I found that Port Replicator II is compatible with Portg M750 and Tecra A/M/R/S Series but no information about Portege R700 :(
In my opinion you should ask the ASP in your country if its the correct part or not before you do something wrong.

Why does my fan go into high speed noisy mode sometimes when I'm not actually doing anything on my laptop?

why does my fan go into high speed noisy mode sometimes when I'm not actually doing anything on my laptop?

Probably Spotlight is indexing your HD? To stop this indexing, have a look here:
http://www.thexlab.com/faqs/stopspotlightindex.html
marek

HT204400 I have an old single 2.4 ghz router. If I upgrade to a new high speed router will I get better streaming video?

I Have an old single 2.4 GHz router. If I upgrade to a new high speed router will I get improved streaming of videos?
thanks.

It depends on what's rate limiting - if it's your wifi maybe, if your internet connection is slow the router won't make a huge difference though some products are better with poor lines.
Can you hook up a laptop to the router via ethernet and test the internet speed via speedtest.net?

Why does error 200279 occur at high speeds only?

I am using a VI very much like the one attached here, and as my motor speeds up and the period value decreases, the vi fails, and error 200279 shows up as displayed in the attached 2 jpg images. This VI is reading the period value of an encoder by rising edges. The error does not show up at low speeds, only high speeds. Hardware is wired through USB ports on PC. Using Labview 2012 and Windows 7.
Do I need to specify the samples per channel for the READ in the case structure to eliminate this error? The error only occurs when the period gets quite short, e.g. 9ms or so. At higher period values (slower motor speeds) the error does not appear. I am using the counters built into the cDAQ9174 chassis and the NI 9401 module to read the period values of my encoder. What is happening at high speeds to cause this error? I thought that the setting on the DAQ Timing VI required that 16 periods are read every iteration, so, why is it saying that it is trying to read samples that are no longer available?
Also, is the "Append Array" building up a large array that is being carried in the SHIFT REGISTER and causing things to slow down? There are a huge number of periods occuring with an encoder at 120 ticks/revolution. should I try to keep this array truncated or something to reduce the size of the data being handled for each iteration? Can this large array be causing the 200279 error?
Thanks,
Dave
Attachments:
forum JUly 18.vi ‏26 KB
error July 18.jpg ‏45 KB
error July 18 part 2.jpg ‏49 KB

I think there's a combination of things that could be contributing. I don't have time for a full explanation right now, here's some quick mods I did to the code you posted. Essential changes are:
- made separate loop for collecting data into a big array. (Maybe you can consider dumping to file instead of growing an array in memory?)
- used a queue to transfer data between loops
- increased the buffer size dramatically while still calculating average of only the most recent periods
- reduced the acquisition loop rate -- expect to retrieve more data points per iteration
There are a couple other things I'd probably add or change with more time, but this minimal set of mods should help some.
-Kevin P

Portege R500 - anybody using DVI over Port Replicator II on WIndows 7 Beta?

Hi,
im using the WIndows 7 beta on my R500 and it's runnig everything well except the DVI-Port (over the Slim Port Replicator II).
All I have installed are the Fingreprint-Software, the bluetooth-stack (which were recommended as solution by the action-centre) and the "TOSHIBA Value Added Package" which adds the Power Management software, control over the 2 hardware Buttons and gives the FN-onscreen-menu to control the FN1-9 functions.
I think I can say it is definatively an driver issue, because if I start the R500 the windows loading-screen is shown on my external screen but when he switches to the desktop the external screen turns off and the desktop appears on the laptop screen. Also no chance to activate it via FN+F5.
I tried it with the buildin Windows 7 driver, the newest intel driver (15.8.3) and the vista driver provided by toshiba (7.14.10.1244), but unlucky none of them works :(
Btw: the vga output works, but only UNdocked :(
Has anyone a solution or a hint what to do or try?

Hello,
the second monitor does not appear in the display settings if the laptop is docked. Even connected to the vga it is not been recognized while this state.
Undocked the vga port works immediately and is shown in the display settings and over FN+F5!
With one driver (didn't remember which one exactely) the FN+F5 menu showed me all options (docked!) (Internal, vga+int, vga only, dvi+int, dvi only) but i couldnt switch to dvi. It was the same behaviour like under XP where I had to boot the Laptop with the DVI-TFT connected (i used Hibernation everytime i docked the r500). But under Win7 this worked, as I said before, only for the "pre-boot" sequence. The windows loading screen showed up, but during switching to the desktop the DVI-port got deactivated.
Recently i dont know my actual BIOS Version, I will check this and try the newest version.

Does Elements 9 Support New Nikon D7000?

Any News on whether the new Elements 9 software will support the new Nikon D7000?. I see where it does support Nikon's NEF Raw Format but can find nothing about Supporting the Nikon D7000 due to be released to stores the middle of October.

Help!
I have the new Nikon D7000 and don't want to have to use the Adobe DNG Converter program for every RAW ("NEF") file I shoot.
Q1: If I buy Adobe PSElements9, and I download the 6.3 Camera Raw plug-in, will I be able to open PSEditor and, using the "Open As" choice on the file menu of the PSEditor, go directly to Camera Raw mode? Or, will I continue to be required to use this more recent CR plug-in-- 6.3-- outside of PSE, then re-open the converted files in Editor?
Q2: Does PSE10 exist, and, if so, has it addressed this Nikon d7000- camera raw compatibiltity issue?
TIA a quick reply. I'm going crazy here!

Aperture has not been updated to support new higher-resolution Facebook images

In August facebook changed the maximum dimensions of a photo from 720x720 to 960x960 (http://blog.facebook.com/blog.php?post=10150262684247131). Much like the last time they upped the resolution of photos on Facebook, Aperture didn't get updated to accomodate this change for months. As I understand this isn't some long gradual rollout -- all FB users can now use 960x960 images, and seeing as this is probably like one line of code to change, I'm just wondering if we'll be waiting months and months again to take advantage of this. In the meantime there's little reason to create FB albums through Aperture since you're forced to use lower resolution images.
Anyone know how to perhaps modify Aperture to make this change while we wait for a proper update?

Totally understand your first point. Some photographers want to protect their work. Thing is, some don't. It's just a hobby for me and I know I won't be making any money on it. People like me just want to put up the best version of a picture FB will allow us to. Perhaps Aperture should allow the user to CHOOSE the resolution of the image that gets uploaded.
Facebook has, for the past while (long before the 960x960 change in August) allowed users to "download" the image, typically at a much higher resolution than what is displayed. The difference is that up until August, images viewed on facebook only displayed at 700x700. Now that's been upped to 960x960.
Upon some re-testing I do have to eat my own foot. I just created a new FB album through Aperture and they are showing up as 960's instead of 700's. However all my older albums still show the images at 700x700 (something FB said would change automatically, since they technically already have much larger versions of these photos to resample to 960x960). It seems you have to force an update by editing the image so it gets reuploaded.
So in conclusion, foot has been inserted into mouth.... though it'd be nice if I could simply "re-sync" my older albums to have them display at 960 without having to fool aperture into reuploading the whole thing....

Why does Verizon have to force high speed adverts down our throats

Every time I connect to internet I get the pop up, channel 500 is on permamenet upgrade mode, and just like everybody else who had 35 service I WAS FORCED TO UPGRADE. Enough already!

cmoore wrote:
Every time I connect to internet I get the pop up, channel 500 is on permamenet upgrade mode, and just like everybody else who had 35 service I WAS FORCED TO UPGRADE. Enough already!
Do you have the Verizon Toolbar installed in your browser? If so, that is probably the reason you see that, disable the toolbar and see if that doesn't fix the problem.
FWIW, I never, ever see what you are describing.
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.4
Keller, TX 76248 (VHO 1)

Dual Monitor on Toshiba Hi-Speed Port Replicator II with R930

Is there a way to get two digital HD signals to two monitors on this docking station? I currently have hdmi and vga, but obviously the vga is blurry compared to the hdmi signal.

I don't believe that's possible.
- Peter

Port Replicator?

Is there a high speed port replicator compatible with the kirabook?
Does the "Port Replicator II" (http://us.toshiba.com/accessory/PA3916U-1PRP/) work for that particular model?
Thanks.
FVB
Solved!
Go to Solution.

Try Dynadock on USB 3.0 instead of port replicator.
-=: moroji :=-

No high-speed USB ports?

When my I-Pod Shuffle is plugged into either of the two USB ports in the back of my computer's modem, my computer states that there is a "High Speed USB Device attached to a non high-speed hub" and that "There are no high-speed USB host controllers installed on this computer". So I take it I'm going to have to buy some sort of high-speed USB device to fit the I-Pod, but I have no earthly idea where I would buy one!

No - you dont need a high speed port it will work fine with a 1.1 (low speed) port. It will just take a lot longer to load songs on your shuffle.
As long as it charges (high powered port is needed - you can have high powered port which is low speed) you shoud be OK.
If you dont like the transfer speed you can probably take out the USB card that you have and replace it with a 2.0 card - a fairly easy and relatively cheap procedure, but if you dont feel comforatble doing it ask a freind who is a bit more tech savvy.

Why does appple not support Firewire to the 5th Gen ipods?

I just picked up a new 5th gen iPod and am upset that it does not allow for connection to my older G3 iMac via Firewire (as did my older iPod Photo 40).
I can connect it using usb 1.0 but that connection is painfully slow. Why not support Firewire conectivity? Perhaps Apple wants to force me to buy a new computer?
G3 imac (CRT) Mac OS X (10.3.9)
G3 imac (CRT) Mac OS X (10.3.9)

"Apple is aware that iMac users could use Firewire with older iPods, but not my new one. It has nothing to do with updating computer hardware."
While it is true there is nothing you can update on your computer to make the iPod work on a Firewire port, it has everything to do with the fact that the iPod no longer supports the HARDWARE (i.e. chipset) for Firewire transfer in the iPod itself. It has been this way for well over a year now.
"IT MAKES NO SENSE TO ME THAT I NOW HAVE TO USE USB WHERE I USED FIREWIRE TO SYNC IN THE PAST."
Extending your flawed logic further, I used to be able to use SCSI drives, ADP keyboards and Mice, AUII network ports, RS-422 serial ports, etc. so should I still be able to use those now? How's that floppy drive working out on your Mac? Used to be those as well, so I guess your Mac has one now?
"This feature is dreadfully slow,"
Yes, USB1.1 ports are very slow which is why all Mac computers for MANY years now, have all come with USB2 ports for high speed transfer. While I know it ***** when you have an older computer that doesn't support the latest in higher speed ports, but you can not expect Apple to support all port types forever on every device and machine.
When the original iMacs came out, everyone moaned and complained about the loss of a floppy drive and all the devices that no longer would work, like tablets, because there were no ADB ports and all the external SCSI drives that couldn't be used. Guess what, everyone got over it and moved on. Now you would laugh it Apple put a floppy drive into a new machine.
Patrick

Can a G4 Desktop OS 8.6 be hooked up to cable modem high speed?

Can anyone help me set up my apple G4 desktop os 8.6 to work with a high speed cable modem to get internet access?

Hi Gepicou
In a word yes, your G4 will definitely support a high speed DSL connection - I'm writing to you on a 7300 powerPC mac I've just dusted off, sent to a repair shop where they set her up for my 512Ko line. I'm deep in the countryside so I don't get a powerful signal, but all is fine. The modem is a Thompson 510 (ethernet).
Normally I use my present Powerbook running on Panther, and since I'm going to England for work reasons, I'm leaving my partner with my old (and dear) Mac to use.
You could try the forum "Mac OS 10.3" > getting online - loads of folk there have used OS9 before, and have experience in newer connections that weren't really around when OS8 or 9 were still mainly in use.
Otherwise, if you get your running orders from that forum, take your G4 to a technician - mine configured the modem in 20 minutes, it cost me 20 euros...
Good luck!
Kathy

Does Portege R700 support new high speed Port Replicator 2 PA3916E-1PRC

Similar Messages

Maybe you are looking for