Does the pre-defined rules provide by SAP in PC 10?

Hi Everyone
I have two question about Process Control 10.
1. Rules, sample controls and scripts provided by SAP in PC 2.5.
Does the pre-defined rules provide by SAP in PC 10?
2. If it provide, how many?
I've read a lot of information about PC 10(RKT, Application Help, Master, Installation, Upgrade, Migration, and Operations Guides),but I can't find it..
Regards
Naoto

Hi Nato,
I believe GRC 10.0 versions are only avalaible for ramp-up's. There is a live expert session being arranged by SAP.
You could attend one of these for more info.  You could look at this [thread|GRC Access Control 10; for more details about the webinar.
Thanks,
Chinmaya

Similar Messages

  • Does the Pre support Bluetooth PAN connections?

    Hello, I am new to the Pre and I am not too sure to its limitations, especially with Bluetooth. I can search for BT devices on my Vista laptop and find the Pre. However, once paired, it does not find any services. If I try and and pair the Pre with the Vista laptop, the Pre cannot see it.
    My main aim to create a PAN connection so that I can get the internet whilst on the move. However, I am unable to do anything with my current BT pairing, not even see the file system or transfer any files across.
    Any help or information on this will be grateful.
    Kind Regards,
    Harold Clements
    Post relates to: Pre p100ueu (O2)

    In order for the Pre or another webOS device to transfer files, it would have to support a relevant network protocol (which mobile OSs tend not to support). So, that's not possible. What the Bluetooth PAN does support, however, is tethering (if allows by the carrier, of course), and use by applications like Chapura Pocketmirror that include their own protocols for file transfer.
    You can find a list of car kits supported by the Pre/Pre Plus here: http://kb.palm.com/wps/portal/kb/common/article/50373_en.html.

  • How to create reports with the prompts like the pre-defined reports ?

    We are analyzing pre-defined report: Historical Pipeline Analysis. When executed we can see the prompts for Pipeline Fiscal Quarter and Pipeline Fiscal Year.
    If we open this analysis I cannot see how this prompt have been built.
    If I save this pre-defined report (without any change) to My Folders and execute it from here, the prompts are gone.
    I´d appreciate any help.
    Antonio

    I have the same issue. The prebuilt reports are actually dashboards, which is why the dashboard prompt filters show up.
    I'm not sure how they get it to be a link like that on the reports tab (since the link doesn't point to a dashboard URL ).
    Any idea how to get this same effect assuming I built the dashboard/prompt around updated report?

  • Does the BI Apps installation provide a sample warehouse?

    Hi Experts,
    Does the BI Apps installable create a sample warehouse with data?
    I am looking to install the BI Apps 11.1.1.7.1 for demo purposes. And I want to know if, when the installation creates the Oracle Business Analytics Warehouse, does it also provide some sample data populated in the Warehouse tables? Or do we have to carry out a sample load from the source systems?
    Thanks in advance,
    Gaurav

    Hi mate,
    If you install obia by yourself.
    then you need import dwh tables from dac by yourself.
    Thanks
    http://mkashu.blogspot.com

  • How does the flow of costs works in SAP PM?

    Dear Experts,
    I just wonder how SAP PM handle the flow of costs from the point the maintenance order is created to the point of completion.
    And also where do all the costs pre-recorded such as man-hour rate, is it in the "work center" master or somewhere else?
    Regards,
    Abraham

    Cost flow in maintenance orders:
    I am summing up the answers already given.
    1.     Estimated costs: This is an approximate value, entered during creation of maintenance order. This value is for information purposes only and will not be validated any where.
    2.     Planned costs: When external procurement of spare(non-stock)/services are required, they are entered in the maintenance order. The spares will have cost in material master. Service cost is entered manually while creation of maintenance order. These costs are calculated when the order is brought to u2018Releaseu2019 status, and appear as u2018planned costsu2019 in the costs tab. 
    3.     Subsequent purchasing activity u2013PR to PO conversion is done and when the material is inwarded, the actual cost as per PO, flows to maintenance order u2013 and populated as u2018Actual costsu2019. Same case happens when service entry sheet is created for external services.
    4.     Now the cost sits with the maintenance order. This must be settled to a cost center, assigned to the equipment, for which maintenance order is processed. When actual settlement is done for the order, the actual cost moves to the cost center and the order value becomes zero. This activity is required from FI Controlling point of view, to accrue the total expenses done on the equipment and adding them to the production cost incurred, using that equipment.
    JP

  • How does the Pre-order $10 promotion work for gamers club unlocked.

    So I've pre-ordered a few games recently.  I've ordered and picked up 3 copies of Destiny (xbox one, ps4, xbox 360)- christmas is coming lol) but it doesn't seem to give me a $10 certificate for each copy.... why  is that. 

    Hi mjfoster77,
    That is a great question!  From my experience, it is fairly common for bonus points not to appear as pending alongside the base points.  If your pre-order of Middle-earth: Shadow of Mordor was shipped or picked up within 7 days of the games official release, then you should see 500 bonus points post to your My Best Buy™ account within about 20 days.  Based on everything I can see, your pre-order should qualify for the bonus points.
    If you perhaps do not see the 500 bonus points post to your account within 20 days, then please do not hesitate to send me a private message and I will see what I can do to ensure those points are added to your account.  You can send a private message by clicking on the blue button in my signature labeled "Private Message."  Let me know if you have any other questions.
    My Best Buy™ - "Get $10" Gaming Pre-order Offer
    Thank you for posting to the forum!
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • How long does the pre approval process take?

    I found a local lender with no overlays for an fha loan! He sent everything to AU.
    How long should it take to hear back?
    He couldn't give me a loan amount off the bat and now I'm anxious lol

    au only takes a few minutes to run.sounds like the lo sent the file to someone else to run 

  • Can we handle the pre defined exceptions?

    Hi people,
    I have a simple stored procedure in oracle 9i with following code.
    create or replace procedure psam1( no int) is
    a number;
    b number;
    e exception;
    v varchar(10);
    begin
    select sal into a from sample where sno=no;
    select count(*) into b from sample where sno=no;
    if b>1 then
    raise e;
    elsif a>1000 then
    v:='PASS';
    else
    v:='FAIL';
    end if;
    dbms_output.put_line(v);
    exception
    when e then
    raise_application_error(-20002,'MORE THAN ONE RECORD EXISTS');
    end;
    My question is if i want to handle the exception
    'ORA-01422: exact fetch returns more than requested number of rows'.
    If my fetch retrieves more than one row then Exception e should be raised.but can we handle those predefined exceptions?.

    Hi Vids,
    As said already, yes you can.
    But there is some misunderstandig in your code. If in fact you do have ORA-01422, you second select will never get executed, since the first one will raise that.
    You code could be as simple as this:
    create or replace procedure psam1(no int)
    is
       a   number;
       v   varchar(10);
    begin
       select sal, case sign(sal -1000)
                    when 1 then 'PASS'
                    else 'FAIL'
                    end
         into a, v
         from sample
        where sno = no;
       dbms_output.put_line(v);
    exception
       when no_data_found  -- Predefined exception for ORA-00001
       then
          do_some_thing; -- Perhaps, just raise;
       when too_many_rows -- Predefined exception for ORA-01422
       then
          do_another_thing;  -- Perhaps, just raise;
    end;As you see ORA-01422 is predefined (TOO_MANY_ROWS), read more about those here [Predefined PL/SQL Exceptions|http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/errors.htm#insertedID4]
    If you choose just to (re)-raise the exception then you should omit that exception handler.
    Regards
    Peter

  • Does the two installations rule follow the suite or individual applications within the suite?

    I would like my web tools on my mac and windows laptops but I want my video/audio editing tools on my desktop tower. So no individual apps would be installed more than twice. Premiere, After-effects and Audtion would all be installed only once but on a 3rd machine - is that possible or would that require deactiving the entire Suite on one of the laptops? - thanks

    It's not possible. The activation is per suite, not per product.
    Mylenium

  • Rating scale does not appear in Pre-defined Performance Mgmt Wizard

    Hi Experts,
    I am implementing SAP Pre-defined Performance template.
    When configuring IMG entry u201CDefine Templates for Performance Managementu201D I run the wizard for Performance, and when I get to the rating the only options that are presented are SAP standard delivered values e.g. Standard Quality Scale 1-5, Standard Quality Scale 0-10, Standard Quality Scale 1-3, Standard Quality Scale 1-3.
    Now I have previously configured rating scale Team Performance with rating values
    1-below expectations
    2-meets expectations
    3-exceeds expectations
    However, this rating scale does not appear in the dropdown list to select from.
    Please can someone explain what could be missing or if they had this issue before and were able to solve this.
    Many thanks
    Oliver

    Hi joker_of_the_deck
    thank you for your quick response. Much appreciated.
    I checked transaction OOHAP_BASIC and my scale is already valid within the Value List.
    There are many other scales in our system within this value list but only the entries I mentioned previously are available in the Pre-defined performance wizard.
    Do you have any other suggestions on why the system would not allow my scale  rating to be selected from the pre-defined performance template as part of the wizard setup?
    Regards
    Oliver

  • Why My Quiz Status Completion Status Slide Does not Move on to the pre-set Success/Fail slide

    Hi,
    I set the Pass or Fail status in the Quiz Preferences as below: If passed, it should jump to Slide 8; if failed, go to Slide 9 (image #1)
    But when I am running and testing the file (F4), it will stop at the Assessment Completion Status screen (Image #2) and never jump to the pre-defined slide. Does anybody know why? Thanks!
    Image #1:
    Image #2:
    Melissa

    This happens so often, users are deleting embedded objects on Question or Score slides. Embedded objects have no visible timeline. Some of them can be turned off using checkboxes (like Back, Next buttons on question slides), others disappear automatically (Submit during review, Retake when Quiz attempts are exhausted) but deleting them manually is always a bad idea. And Continue button on the Score slide is as important as the Submit button on Question slides. Those are the buttons that trigger the actions linked to those slides: Success/Last Attempt actions for the Question Slides, and the Passing/Failing grade actions for the Score slide. This is just a bit more in details what Rod told you, not another answer at all.
    Question Question Slides in Captivate - Captivate blog
    Question Question Slides - Part 2 - Captivate blog
    Those articles describe functionality and tweaking possibilities. They were written for an older versions, but are still valid.
    If you want to skip the Continue button, it is possible to create a conditional advanced action that uses the value of the system variable cpQuizInfoPassFail to choose a jump to the appropriate slide.

  • How to export multiple copies reoprts based on parameters and with pre-defined naming

    Hi All:
    I have a problem of using SSRS 2012, we have multiple clients and they wanted us to deliver the pre-defined excel reports to different branches based on selecting the "branch name" parameter, also they have a naming rule for the excel
    report file.
    We cannot use the subscription as they need to do it in one batch and upload to an FTP file, therefore we are doing this manually for over 300 reports. Is this a convenient way to generate them in one batch as well as customising their file names?
    Thanks a lot for your help.
    Cheers
    Johnny

    Hi JohnnyKahWang,
    As per my understanding, there are multiple clients, you want to deliver reports to clients according to branch name parameter, and naming the excel file according to the rule. If that is the case, we can use data-driven subscription to achieve your goal.
    Reporting Services provides data-driven subscriptions so that you can customize the distribution of a report based on dynamic subscriber data. Data-driven subscriptions use query results to determine the recipients of the subscription, delivery settings,
    and report parameter values. At run time, the report server runs a query to get values used for subscription settings. We can use the Create Data-driven Subscription pages to define the query and assign query values to subscription settings. For detail information,
    please refer to the following steps:
      1. Open Report Manager, and locate the report for which you want to create a data-driven subscription.
      2. Hover over the report, and click the drop-down arrow.
      3. In the drop-down menu, click Manage. This opens the General properties page for the report.
      4. Select the Subscriptions tab, and then click New Data-driven Subscription.
      5. Choose a method of delivery, then select data source for the subscription.
      6. Specify a query that retrieves subscriber data like below:
    CREATE TABLE Name (
    BranchName varchar(20),
    ExcelFileName varchar(20),
    Email_to varchar(50)
    INSERT INTO Name values
    ('Branch1', 'Name1', '[email protected]'),
    ('Branch2', 'Name2', '[email protected]'),
    ('Branch3','Name3', '[email protected]');
      IF we chose Windows File Share delivery extension, we can define path in the query.
      7. Specify delivery extension options like below:
      8. Specify report parameters to BranchName.
      9. Specify when the subscription is processed, then click Finish to save the configuration.
    For more information about Data-driven Subscription, please refer to the following documents:
    http://msbimentalist.wordpress.com/2013/08/26/how-to-create-data-driven-subscription-in-ssrs/
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu

  • Pre-defined performance - MSS - Cascading team Goals

    Hi Experts,
    we are using the SAP pre-defined performance EHP4 system.
    We have created a template in our DEV system and are able to create the appraisal document from the Manager and update by the employee.
    Within the team goals screen (iview) of the pre-defined template, we can select the view u201CDirect Reportsu201D which allows us to Cascading of team Goals.
    Our issue is if we select the view u201COrg Unit structureu201D or the u201CEmployee structureu201D then we get a Portal crash
    The other related issue is the goal end date is being defaulted as 31.12.9999 and we are getting the error u201CEntered dates must be in the current yearu2019 where the plan start date is 01.08.2010 and the end date is 31.07.2011.
    Does the start and end date of the goals have to be a calendar year?
    Please can someone tell me if they did any additional config or found a solution to these issues?
    Many thanks
    Oliver

    Hi,
    in the standard the team goals period is limited to a maximum of one year. But SAP provides two enhancements (enhancement spot HRHAP00_GOAL_PERIOD) that can be used to allow different periods. These are:
    - HRHAP00GOAL_PERIOD_GEN For the generic UI
    - HRHAP00GOAL_PERIOD_PMP For the predifined process
    So you may use these to fulfill your requirement. Just take into account that the Goal assessment for the goals (if they are valid more than one year) would be the same for all the validity period of the goal.
    Regards,
    Ana

  • Guest users in WLC are not logged out after pre defined time.

    Hi,
      My customer wants to create guest users in wireless lan controller. We were successfully able to create that and it worked . But the problem is that to access the internet the users have to change the "proxy server" settings on the internet explorer. As a result the guest users are not logged out automatically after the pre defined amount of time. We enabled " by pass proxy server " settings in internet explorer also, unfortunately it didnt work too.
      If we disable the proxy settings in internet explorer customers were logged out, but the problem is that once the customer log in he will change the proxy settings in internet explorer to browse net  but wont get disconnect unless and untill he manually change the proxy settings in the internet explorer.
      Is there any other way to solve this issue? Can any one provide any alternative solution  if possible.
    Regards,
    Bibin

    Can you explain how your proxy server has anything to do with your wireless access duration?
    Does you proxy server have the logic that stops the internet access after a period of time? If so, I assume you turn proxy off in order to web-authenticate? If so, then you just need to tell the browser to not proxy for the virtual IP address of the WLC.   You'll never get redirected to the webauth page if you don't send a https request to it (as if, your browser is sending it the IP of your proxy server).

  • How to use pre-defined scenarios for RosettaNet with XI 3.0

    Hi all.
       I am working in Comgroup Shanghai co. ltd. which is partner of SAP China.
       We have a potential customer who use RosettaNet as their Supply Chain EDI system.
       I would like to make a demo for demostrate the pre-defined scenarios for RosettaNet RNIF 2.0 packages.
       Where can I find such guideline ? I have checked the article: implementing RosettaNet with XI 3.0, but it cannot help me.
       Another question is how I can develop my own scenarios for the RNIF standards which are not included in XI RosettaNet business package ?

    Hi Andy,
    See the instructions below after you installed the RosettaNet STK.
    Below given is the sample config for PIP3B2 Scenario. Part I is using STK and Part II is using 2 XI systems.
    <b>Part I. Test Using STK</b>
    In your XI ID:
    1) Define both the parties 1) Shipper(Your Partner) 2) Receiver(Your company) with identifiers like DUNS Number.
    2) In ID goto>Tools>Transfer Integration Scenarios from IR-->select the scenario "PIP3B2_Receiver" from the drop down list.
    3) Follow the 4 steps in the config wizard.
    4) While creating your CC, create it from the channel template delivered with the RosettaNet BP.
       4.1) Specify the URL for STK which should be in the following format
    http://<STK Server>:<port>/rosettanet/servlet/listenerServlet?userId=<Party Name>
       4.2)In the location fields, enter your location and your partner location.
    In your STK
    1) Start the RosettaNet STK.
    2) enter the UserID<Partner Name in XI>
    3) Select the Test Scenario, 3B2V01.01-AdvanceShipmentNotification-0001-Scenario-Shipper
    4) Enter Global Business ID(DUNS Number) and Location ID for both the partners. These fields should be same as in your R/3 Party configuration.
    5) Enter the URL as follows:
    http://<XI Server:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
    If everything is configured correctly as mentioned, you should be able to test your single-action scenario.
    <b>Part II Test using another XI System</b>
    For these follow the steps above for XI Config.
    Configure one XI System as PIP3B2 Shipper using the Scenario "PIP3B2_Shipper" and config wizard as mentioned above.
    Configure the other XI as PIP3B2 Receiver using the scenario "PIP3B2_Receiver" and config wizard.
    In the Url field, specify the URL as follows:
    http://<XI host>:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
    Hope this helps.
    Regards,
    Sam Raju

Maybe you are looking for