Does the printer T770 print on card stock

I need to know if the printer series T770 prints on card stock. If so, where can the card stock be ordered?

Hi,
Is this the following one ?
http://www.hp.com/hpinfo/newsroom/press_kits/2010/IPEX2010/HP_Designjet_T770_Printer_DS.pdf
No, it only supports
Bond and coated papers, technical papers, films, photographic papers, backlit materials, self-adhesive materials 60 to 328 g/m²
24-in printers: 210 x 279 to 610 x 1676 mm (8.26 x 11 to 24 x 66 in) sheets; 279 to 610 mm (11 to 24 in) rolls
44-in printers: 210 x 279 to 1118 x 1676 mm (8.26 x 11 to 44 x 66 in) sheets; 279 to 1118 mm (11 to 44 in) rolls
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

OfficeJet Pro 8000 no borderless printing on card stock via Windows driver

I just setup the OfficeJet Pro 8000 wireless printer the other day with the intent to print borderless cards on card stock. I can print anything to it without issue however if I attempt to use borderless mode the Windows driver does NOT allow any paper type other than photo or glossy borchure types.
If I print anyway on card stock it looks ink soaked and muddy. If I print on their recommeded types it looks fine but a card needs heavy card stock, not med or light paper weights.
If I do not select borderless, the print (on card stock) has a dredded border but the print quality is fine.
The driver will not allow even a "normal" or "draft" borderless on standard paper types. Is there a hack or modification to allow me to print borderless on any paper?

Hello,
Please click HERE to access the steps that should resolve the issue.
You may have to try Solution Three .
. If issue still persists, please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

How do I get an Office Jet 6500A to print on Card stock?

How do I get an Office Jet 6500A to print on card stock. It pushes the card stock through the printer but will not print and tells me I have not selected the right print media. There is no selection for card stock. I have tried every selection. I assume there are other media definitions that can be downloaded but they certainly are not apparent. I have been doing this job on all my other HP printers for years. Suddenly this printer balks.

Hi,
Page #22 of the manual says (must be the same as photo paper ?):
To load cards and photo paper
1. Lift the output tray.
2. Slide the paper width guide out as far as possible.
3. Insert the media print-side down along the right of the main tray. Make sure the media aligns with the right and back edges of the tray and does not exceed the line marking in the tray. If the photo paper has a tab along one edge, make sure the tab is pointing towards the front of the printer.
4. Slide the media guides in the tray to adjust them for the media size that you have loaded.
5. Lower the output tray.
6. Pull out the tray extender.
And the manual is : h10032.www1.hp.com/ctg/Manual/c02519721.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IPhoto '11: Horizontal lines appear across photo printed on card stock; don't appear on drafts printed on paper. How to get rid of them?

iPhoto '11: Horizontal lines appear on photo printed on card stock; don't appear on photos printed on paper or other card stock. How to get rid of them?

Horizontal lines appear on photo printed on card stock; don't appear on photos printed on paper or other card stock.
What's the difference between the first card stock and the other card stock? What's the finish on the problem card stock? What printer are you using? Does is have a physical adjustment for different stock thicknesses?

PRINTING ON CARD STOCK

When attempting to print on card stock paper, the LJ 6500 ejects the (blank) card stock paper and then prints on the second page. Yes, I know...put the card stock as the second page. But, I would like to know why the AIO ejects the first page. The driver that I am using is a E710A-F.
Your thoughts?

rak1up,
This article covers issues with blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Does the printer models "Canon IR 2016 URF ll LT" support SAP printing?

HI All,
Does the printer models "Canon IR 2016 URF ll LT" support SAP printing?
What is the device type we need select SPAD configuration..
I have checked all the possible device type ,there is no physical output has received .
but in SP01 status.."completed". Which device type should i select SAP..
Reagrd
Jagadish

Dear Jagadish,
Did you try with CAN22 : CANON iR 2200.
Regards,
Naveen.

Why does the printer suddenly not recognise the computer

why does the printer suddenly not recognise the computer

salkenward
Welcome to the HP Community Forum.
This issue is frequently caused by a driver malfunction although the problem could be just about anything.
You didn't provide any information.
The good news: You can still help yourself and there is lots of help available, including -- in many cases -- the printer software for your computer so you can reinstall and be on your way again.
Install Full Feature Software – Printer
Take a look at the helpful videos if you need help with the installation.
Take a look, too, at the Troubleshooting / How-to / Solve a problem sections for more help on just about everything "printer".
There is a new "Print Doctor" in town for many printer models. If there is a new print Doctor program for your model, it will be in your printer software webpages under Utilities or Diagnostics.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

After joining / supporting Mozilla the "print my card" button sends me to a blank tab. Mac 10.6.7 Ff 4.0.1

After joining / supporting Mozilla the "print my card" button sends me to a blank tab. Mac 10.6.7 Ff 4.0.1

The 10.6.3 Snow Leopard retail disk Apple sells on their online store will work to restore your software and is needed to fix your machine.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Once you get it, backup then follow this list of fixes.
Most commonly used backup methods
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Where does the print to pdf files go using CreatePDF?

I have installed the Adobe CreatePDF Desktop Printer and selected it to print some docs, the print window says file type AdobeCreatePDFIPP where: https//ipp.acrobat.com/ipp and I can't find the files. Where are they located? I thought they went into my Adobe.com folder.

hi eveybody,
we recently executed all the suggested steps from this and the mentioned threads to get along with it and make the printed files from Adobe CreatePDF Desktop Printer visible. until now we were not successful.
If you're having issues installing the CreatePDF Printer, please read this article:http://kb2.adobe.com/cps/904/cpsid_90492.html
If you've installed the CreatePDF Printer but the printer is not working (on Windows 7 SP1), please read this article:http://kb2.adobe.com/cps/901/cpsid_90130.html
Finally, if your CreatePDF Printer is appearing as "offline" in your printer list, please try this work-around:http://forums.adobe.com/message/4183649#4183649
- installing works fine,
- is there a similar solution for winXP too?
- printer is online
at least we try to print/convert a tif file with it but it does not show up.
the testing was done on a winXP and win7 system with the same bad results.
uploading manually when logged in on acrobat.com is possible.
there is no error message coming up, on the network monitor the file seems to be sent.
since the tif files did not work we tried jpg and docx without success. is there anything apart from the regedit solution on winXP or rerunning installation/repairing procedure that could be done to make it work?
would be great if somebody would have a suggestion what elso could be done.

Why, when I click on watch list, does the print shrink and move to the left of the screen, and when scroll down, a load of jargon follow the watch list?

Hi, does anyone know how to rectify this problem?
It only happens on eBay, when I click on "watch list". It starts of normal but by the time it completes, the print has got tiny and moves to the left of the scree. I can use the fingers to enlarge it, but shouldn't have to do that and it reverts to small when I try to use it again! VERY annoying - it's only started happening recently, I've had this iPad 2 for 6 months, and it NEVER happened with my iPad 1!
HELP please!

It's likely an oddity with the eBay site - they may have introduced the issue with a site update. I'm not certain, just sugesting.
Having said that, I don't see this behaviour on my iPad 3. Try restarting the iPad and see if that fixes it.
I use the eBay apps on both iPhone and iPad - I find them much easier than the website - might be worth a look

Why does the print cue window stay open even after job is done?

In Tiger, and every other version of OSX I have any recollection of using, the printer window opens to display what's in the cue when you select to print something. Once printing is done, this cue closes. Since installing Leopard, everytime we print from our iMac, MacBook or MBP, the print cue window stays open indefinitely after the job is done, requiring a manual closing of the window. I can't for the life of me fathom what benefit this brings or who would want this. Is this part of Leopard or a problem with our install? Something I can turn off?

If you control-click (or right click) on the open printer queue in the Dock you can choose to have it auto close once the spool file is sent.
As to why this is necessary in Leopard, well I haven't seen a good enough answer to date...
PaHu

How does the print gamut compare with mobile devices?

I need to design a document for 4 color process printing, using only colors that will reproduce correctly on other platforms, such as computer monitors, smart phones, and tablets.
I know how the print gamut compares with the RGB gamut of monitors.
But are the gamuts of phones and tablets the same as monitors?

There's very little hard evidence, based on a Google search. This Anandtech page, which compares the gamut, contrast, etc. of the iPad with Android tablets is the only one I could find.
http://www.anandtech.com/show/5689/the-new-ipad-retina-display-analysis/3

Photosmart 5520 Why does the printer always run a blank sheet before it makes a copy?

My Photosmart 5520 always runs a blank sheet before it runs the copy/copies. Is there a setting I can change?

Hello Camille33,
Welcome to the HP Forums!
I understand your Photosmart 5520 runs a blank sheet of paper before you copy a document. I will do my best to assist you! Just to clarify are you printing a document from your computer or copying a document directly from your printer?
If so, then please make sure this printer is plugged into a direct wall, not a surge protector. I want to see if this makes a difference. Next, try resetting the printer for more than 60 seconds. Leave the printer turned on, then disconnect the power cord.
Make sure the firmware is up to date on this printer. I will provide the HP website where you can find this download here.
I will be looking forward to hearing back from you. Have a great night!
I worked on behalf of HP.

Help! All-in-One Printer/Scanner: why does the printer work when the scanner doesn't?

I have a Mac OS X 10.8.1, brand new. I want to connect my Lexmark X2480 all-in-one printer and scanner to it.
I have downloaded both drivers from the lexmark website, printing works fine. However, I am trying to use image capture to scan, the device is recognised but when I click "scan" image capture says "scanner not available" and the device disappears from the list until I unplug it and plug it back in again.
On "Print and Scan" under "System Preferences" it lists the printer as Idle, however, clicking on "Open Scanner" opens the window but it is completely grey and all the buttons are in grey.
I don't understand what is wrong (as the printer is working it's unlikely to be the cable or the hardware) I am new to Mac, is there something I am missing?
Any help would be really appreciated!! (P.S. I have tried to restart my computer and it didn't change anything)

Install the Image Capture scan driver here.
If you're planning to scan using the control panel of your printer, download the scan center here.

Why does the printer stop without notice?

Hello all, I'm sharing a printer with Mac OS Server (10.3) and the problem is that it stops randomly, I mean it works properly but sometimes the server stops the queue without a notice. The printer is HP 4100
It usually fails when a user sen a .PDF file. If somebody can help me I would be grateful.
Thanks.

salkenward
Welcome to the HP Community Forum.
This issue is frequently caused by a driver malfunction although the problem could be just about anything.
You didn't provide any information.
The good news: You can still help yourself and there is lots of help available, including -- in many cases -- the printer software for your computer so you can reinstall and be on your way again.
Install Full Feature Software – Printer
Take a look at the helpful videos if you need help with the installation.
Take a look, too, at the Troubleshooting / How-to / Solve a problem sections for more help on just about everything "printer".
There is a new "Print Doctor" in town for many printer models. If there is a new print Doctor program for your model, it will be in your printer software webpages under Utilities or Diagnostics.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Does the printer T770 print on card stock

Similar Messages

Maybe you are looking for