Does Vista support SAP?

Hi,
   The function 'GUI_DOWNLOAD' doesn't work well on Vista ,no files have been downloaded to the local . But when i run the report on Windows XP, everything is well.
   Anyone has meet this problem?
   Expect your help. Thanks in advance.
           qiuguo

Hi,
    I hava set the codepage. pls help me to check whether there is some error.
    thanks very much.
    the code is below:
   call function 'GUI_DOWNLOAD'
    exporting
      BIN_FILESIZE                    =
      filename                        = content_filename
      filetype                        = 'ASC'
      <b>CODEPAGE                        = '4310'</b>
      APPEND                          = ' '
      write_field_separator           = 'X'
      HEADER                          = '00'
      TRUNC_TRAILING_BLANKS           = ' '
      write_lf                        = 'X'
    tables
      data_tab                        = t_dn_document
      fieldnames                      = download_fieldnames
   exceptions
      file_write_error                = 1
      no_batch                        = 2
      gui_refuse_filetransfer         = 3
      invalid_type                    = 4
      no_authority                    = 5
      unknown_error                   = 6
      header_not_allowed              = 7
      separator_not_allowed           = 8
      filesize_not_allowed            = 9
      header_too_long                 = 10
      dp_error_create                 = 11
      dp_error_send                   = 12
      dp_error_write                  = 13
      unknown_dp_error                = 14
      access_denied                   = 15
      dp_out_of_memory                = 16
      disk_full                       = 17
      dp_timeout                      = 18
      file_not_found                  = 19
      dataprovider_exception          = 20
      control_flush_error             = 21
      others                          = 22
  if sy-subrc ne 0 .
    message id 'HRPAYCN' type 'E' number '019'.
  endif.

Similar Messages

  • Does Vista support natively h264 GPU accelerated decodign?

    Hi.
    I read that Firefox will support html5 h264 decoding, but not natively.
    Does Vista support natively h264 GPU accelerated decoding? or have I in the future to give up this upcoming new feature of FF? thanks

    your link does redirect to
    http://www.mozilla.org/us/firefox/fx/?from=getfirefox
    and FF11 does not support html5 h264 video yet...
    it is strange that it is difficult in establishing if Vista (released 2007) is able or not in handling h264.

  • Does sapjco support SAP WebApplicationServer running on zseries?

    Hi,
    We have SAP Web Application Server running on zseries ( Z/990 Linux processors) and want to connect using sapjco 2.0.10 or 2.1.3, sapjco is installed on one of it's supported platform.
    We are running into issues. Does anyone know if this scenario is supported?
    Thanks

    You can find out about supported scenarios on service.sap.com/pam, where "pam" stands for product availability matrix.
    Regards,
    Benny

  • Why does Silverlight install process state that my 64-bit Win Vista OS does NOT support the 64-bit version of Silverlight?

    As of Monday 4/20, I've encountered a significant problem with Silverlight on my Vista PC. 
    Several weeks ago I read a brief item stating that Google would be dropping support for npapi and that it would affect Silverlight sometime in April.  One of my key daily apps uses Silverlight, but I didn't receive notification from that software's author
    about the pending change and how it would be handled.  Successfully used the app every week (Mon-Fri) this month for 8-10 hrs/dy day (as I've been doing for the past ~5+ years: past year under Chrome, year before that under FireFox, ~3 prior years
    under IE) and on Fri 4/17 shut it down for the weekend.  When I booted up on Mon morning and tried to log into the key app however, it prompted me to download and install Silverlight, acting as though I never had it installed!  
    I recalled the earlier warning about Google dropping support, so I closed Chrome, started up FireFox, but got the same prompt from the app -- it directed me to install Silverlight.  I downloaded it (had no choice as to which version, just got the "Silverlight_x64.exe"
    file) and got part-way through the install when this error msg popped up:  "Unable to Install Silverlight.  Your operating system does not support the 64-bit version of Silverlight".  WHAT?!   Clicking on the "more info"
    link led to this msg:  "Message ID: 1518.  Your operating system does not support the 64-bit version of Silverlight.  Click here for the latest version of Silverlight."  That link simply led back to the download page which resulted
    in receiving another copy of the same executable file.
    According to my system ( > Control Panel > System ), I'm running "Windows Vista Home Premium", with a "System Type:  64-bit Operating System".  I've been using this same Vista PC since Sep 2008 and running Silverlight for
    around the past 5 yrs.
    ? -- Why doe the Silverlight installer code flag my OS as not supported?   
    ? -- Is there a way to get an older version of Silverlight that will run under Vista?  
    Thanks in advance for any helpful comments.

    Andy -- Thanks for the link, but I'm not adventurous enough to download from a non-MSFT site.  
    Besides, since I didn't make any changes to my hardware/software config, I expect a MSFT rep to explain why their two programs suddenly stopped working together and then provide whatever code fix is needed.  A phone call to their tech support (predictably)
    led to nowhere but a recommendation to purchase one of the company's support offerings (which I declined to pursue).  The Silverlight development team appears to participate in these forums, so I'd hope one or more of them offers a realistic solution.
    Here's something I forgot to mention in my original post:  In several of the threads on this subject (some dating back to 2008!), people have
    suggested running IE as the browser vs FireFox or Chrome; however, that idea fails to note that the error msg (Message ID:1518) clearly states that "your operating
    system does not support the 64-bit version of Silverlight"; it doesn't say anything about
    what browser you're using.  

  • Does Crystal 2011 supports SAP R/3 4.6?

    Friends,
    I would like to know Does Crystal 2011 supports SAP R/3 4.6? Please help.
    Thanks,
    Tilak

    Hi,
    yes, it does. Here is a Screenshot from the CR2011 SPS6 Data Access File
    The (4) indicates:
    (4) SAP servers required to have at least the above patch levels. The following correction notes should be applied to your SAP BW / SAP NetWeaver BI system: 1125433, 1161911, 1162349, 1162416, 1170323, 1230303 and 1007048. OSS Correction Note 1007048 requires a manual configuration step.
    Regards
    -Seb.

  • Does N810 support Bluetooth SAP(SIM Access Profile...

    Does N810 indeed support Bluetooth SAP? If so, N810 must have its own GSM modem, does N810 have modem?

    It has no GSM modem because it isn't a mobile phone. It cannot use GSM or 3G networks.
    It's an internet tablet that can be used to make VoIP calls over wi-fi.
    I believe it supports SAP because it can access the sim on a mobile phone thats connected via bluetooth.
    You won't get a reply from a nokia engineer here as this is a user to user forum. If you want a comment from nokia you need to use the "contact us" link near the top of the page.
    Message Edited by psychomania on 26-Nov-2008 09:52 AM

  • SAP NetWeaver CE 7.1 EHP1 does not support version 1.5 JCA?

    Hi,
    I've been following the documentation of SAP NetWeaver CE 7.1 EHP1 regarding creation of a version 1.5 resource adapter. When I finally got to "Add/Remove projects" in the server view to test my adapter, I get this error:
    The server does not support version 1.5 of the J2EE Connector module specification
    Is this true? Then why does the documentation explain how to do it?
    Regards,
    Johan

    >
    Johan Hoogenboezem wrote:
    > Hi Yordan
    > No it is this one: [http://help.sap.com/saphelp_nwce711/helpdata/en/44/edb79d7f7303fde10000000a1553f6/content.htm|http://help.sap.com/saphelp_nwce711/helpdata/en/44/edb79d7f7303fde10000000a1553f6/content.htm]
    >
    > I'm used to the tuturials spelling out the creation of the application project whereas point 3 (c) of "Creating a Connector Project"
    > on that page does not make it clear that an application project is needed. Usually there is a separate heading for that, like
    > "Creating the application project". It seems silly, now, but at the time that is how I interpreted it.
    > Regards,
    > Johan
    Hi Johan,
    I agree with you that this does not seem clear enough throughout the Resource Adapters documentation.
    Generally speaking about the Developer Studio, there are two equivalent options to add your project (be it JCA, EJB, Web, JPA, etc.) to an EAR project:
    While creating your project, you can specify that you want it to be added to an EAR project - either a new one or an existing one (you can create the new EAR project also in the meantime, while creating your JCA project). This is done using the "Add your project to an EAR" checkbox and the relevant dropdown list and button...
    Create your project. Then create a new EAR project and specify which projects you want to be included in the EAR.
    As I promised, we will improve that part of the documentation for the next release.
    Thanks again, and best regards,
    Yordan

  • Does the printer models "Canon  IR 2016 URF ll LT" support SAP printing?

    HI All,
    Does the printer models "Canon  IR 2016 URF ll LT" support SAP printing?
    What is the device type we need select SPAD configuration..
    I have checked all the possible device type ,there is no physical output has received .
    but in SP01 status.."completed". Which  device type should i select SAP..
    Reagrd
    Jagadish

    Dear Jagadish,
    Did you try with CAN22 : CANON iR 2200.
    Regards,
    Naveen.

  • Virtual Sound does not support my Satellite A100-998 with Vista

    Hi.
    I have Satellite A100-998, and yesterday i find for my laptop available new driver. I download Virtual Sound for my laptop and for vista and when i try install driver i have error "Toshiba Virtual Sound does not support your computer." Why
    Ps. Sorry for my bad English, but please help me!

    Hi,
    had you "Virtual Sound" before? If no, then your machine has probably NO "Virtual Sound". But if yes, then check if you downloaded the appropriate driver for your machine, because there are some many variations of the machine you have, and some of these machines have absolutely different hardware.
    Which operating system is on your machine installed?
    Greets

  • I keep getting notices to install Adobe Flash Player version 10, however when I click on the various boxes, it then tells me that Flash Player does not support Vista. What does all this mean?

    I keep getting notices to install Adobe Flash Player Version 10, however when I click on the various boxes, it then says that Flash Player does not support Vista. What does all this mean and what is a Flash Player?

    I keep getting notices to install Adobe Flash Player Version 10, however when I click on the various boxes, it then says that Flash Player does not support Vista. What does all this mean and what is a Flash Player?

  • I purchased Premiere Elements 13.  Elements does not support Windows Vista which is our operating system.  I have Elements 12 and never had this problem.

    I purchased Premiere Elements 13 & Elements does not support Windows Vista which is our operating system.  I have Elements 12 and never had this problem.  What are my options?  Do you have a compatible program for WinVista similar to Premiere Element?

    deniseu
    This is not Adobe. Please do not duplicate threads. I have answered one of at least 3 of your threads currently appearing at the top of the list of threads in the Adobe Premiere Elements Forum tonight. Please see
    I purchased Premiere Elements 13 and it is not compatible to Win Vista which is my operating system.  What are my options?
    New to Premiere Elements 13....it does not support Windows XP, Windows Vista, and OSX 10.7.
    Also see
    Removed features and unsupported file formats | Adobe Premiere Elements 13
    In your other thread which I have cited above, I have posted a list of choices ahead of you. There is no workaround to get Premiere Elements 13 to support Vista, XP, or OSX 10.7 that has ever surfaced.
    ATR

  • "DBSL does not support extended connect protocol" while configuring SSFS

    Hi, I'm trying to configure ssfs on ERP EHP7 on HANA Database system. Doing it with this guide - SSFS Implementation for Oracle Database
    But when I'm trying to test connection with r3trans I got following error in the log:
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): DBSL does not support extended connect protocol
    4 ETW000                         ==> ssfs won't be used                                                   26  0.004936
    I already updated DBSL_LIB to the latest version, but it doesn't help.
    Here is full log:
    4 ETW000 C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE version 6.24 (release 741 - 16.05.14 - 20:14:06).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 02.06.2014 - 13:49:16
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [     dev trc,00000]  Mon Jun 02 13:49:16 2014                                                 106  0.000106
    4 ETW000  [     dev trc,00000]  db_con_init called                                                        36  0.000142
    4 ETW000  [     dev trc,00000]  set_use_ext_con_info(): ssfs will be used to get connect information
    4 ETW000                                                                                                  61  0.000203
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  26  0.000229
    4 ETW000  [     dev trc,00000]  create_con (con_name=R/3)                                                 17  0.000246
    4 ETW000  [     dev trc,00000]  Loading DB library 'dbhdbslib.dll' ...                                    46  0.000292
    4 ETW000  [     dev trc,00000]  DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEED100000
    4 ETW000                                                                                                3840  0.004132
    4 ETW000  [     dev trc,00000]      using "C:\usr\sap\CM1\DVEBMGS04\exe\dbhdbslib.dll"                    21  0.004153
    4 ETW000  [     dev trc,00000]  Library 'dbhdbslib.dll' loaded                                            21  0.004174
    4 ETW000  [     dev trc,00000]  function DbSlExpFuns loaded from library dbhdbslib.dll                    42  0.004216
    4 ETW000  [     dev trc,00000]  Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.22)                 81  0.004297
    4 ETW000  [     dev trc,00000]  function dsql_db_init loaded from library dbhdbslib.dll                   25  0.004322
    4 ETW000  [     dev trc,00000]  function dbdd_exp_funs loaded from library dbhdbslib.dll                  41  0.004363
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    47  0.004410
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000)            24  0.004434
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.004452
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000205F170)            22  0.004474
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.004491
    4 ETW000  [     dev trc,00000]  New connection 0 created                                                  17  0.004508
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                  38  0.004546
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141BAEDB0)            44  0.004590
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.004609
    4 ETW000  [     dev trc,00000]  db_con_connect (con_name=R/3)                                             19  0.004628
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  24  0.004652
    4 ETW000  [     dev trc,00000]  find_con_by_name found the following connection:                          17  0.004669
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                 164  0.004833
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): reading connect info for connection R/3             34  0.004867
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=74,arg_p=0000000000000000)            24  0.004891
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=15)                                                   19  0.004910
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): DBSL does not support extended connect protocol
    4 ETW000                         ==> ssfs won't be used                                                   26  0.004936
    4 ETW000  [     dev trc,00000]  { DbSlHDBConnect(con_info_p=0000000000000000)                             31  0.004967
    4 ETW000  [     dev trc,00000]  DBHDBSLIB : version 741.10, patch 0.022 (Make PL 0.26)                    34  0.005001
    4 ETW000  [     dev trc,00000]  HDB shared library (dbhdbslib) patchlevels (last 10)                      32  0.005033
    4 ETW000  [     dev trc,00000]    (0.022) Get database version via dbsl call (note 1976918)               24  0.005057
    4 ETW000  [     dev trc,00000]    (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
    4 ETW000                                                                                                  32  0.005089
    4 ETW000  [     dev trc,00000]    (0.020) SQL DDL with data aging (note 1897636)                          21  0.005110
    4 ETW000  [     dev trc,00000]    (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
    4 ETW000                                                                                                  30  0.005140
    4 ETW000  [     dev trc,00000]    (0.014) Tablesize calculation for HANA optimized (note 1952609)         25  0.005165
    4 ETW000  [     dev trc,00000]    (0.014) Native SQL UPSERT with DataAging (note 1897636)                 21  0.005186
    4 ETW000  [     dev trc,00000]    (0.014) DBSL supports HANA revision number up to 3 digits (note 1952701)
    4 ETW000                                                                                                  27  0.005213
    4 ETW000  [     dev trc,00000]    (0.010) Quotes missing by FAE with the hint dbsl_equi_join (note 1939234)
    4 ETW000                                                                                                  28  0.005241
    4 ETW000  [     dev trc,00000]    (0.007) Obsere deactivate aging flag (note 1897636)                     24  0.005265
    4 ETW000  [     dev trc,00000]    (0.007) Calculated record length for INSERT corrected (note 1897636)
    4 ETW000                                                                                                  27  0.005292
    4 ETW000  [     dev trc,00000]                                                                            15  0.005307
    4 ETW000  [     dev trc,00000]   -> init()                                                                21  0.005328
    4 ETW000  [     dev trc,00000]    STATEMENT_CACHE_SIZE = 1000                                            181  0.005509
    4 ETW000  [     dev trc,00000]   -> init()                                                               505  0.006014
    4 ETW000  [     dev trc,00000]   -> loadClientRuntime()                                                   27  0.006041
    4 ETW000  [     dev trc,00000]  Loading SQLDBC client runtime ...                                         19  0.006060
    4 ETW000  [     dev trc,00000]  SQLDBC Module  : C:\usr\sap\CM1\hdbclient\libSQLDBCHDB.dll               779  0.006839
    4 ETW000  [     dev trc,00000]  SQLDBC Runtime : libSQLDBCHDB 1.00.68 Build 0384084-1510                  74  0.006913
    4 ETW000  [     dev trc,00000]  SQLDBC client runtime is 1.00.68.0384084                                  45  0.006958
    4 ETW000  [     dev trc,00000]   -> getNewConnection()                                                    28  0.006986
    4 ETW000  [     dev trc,00000]   <- getNewConnection(con_hdl=0)                                           78  0.007064
    4 ETW000  [     dev trc,00000]   -> checkEnvironment(con_hdl=0)                                           34  0.007098
    4 ETW000  [     dev trc,00000]   -> connect(con_info_p=0000000000000000)                                  27  0.007125
    4 ETW000  [     dev trc,00000]  Try to connect via secure store (DEFAULT) on connection 0 ...             62  0.007187
    4 ETW000  [     dev trc,00000]   -> check_db_params(con_hdl=0)                                         61365  0.068552
    4 ETW000  [     dev trc,00000]  Attach to HDB : 1.00.68.384084 (NewDB100_REL)                           7595  0.076147
    4 ETW000  [     dev trc,00000]  Database release is HDB 1.00.68.384084                                    49  0.076196
    4 ETW000  [     dev trc,00000]  INFO : Database 'HDB/00' instance is running on 'hanaserver'            6867  0.083063
    4 ETW000  [     dev trc,00000]  INFO : Connect to DB as 'SAPCM1', connection_id=201064                 43659  0.126722
    4 ETW000  [     dev trc,00000]  DB max. input host variables  : 32767                                   6954  0.133676
    4 ETW000  [     dev trc,00000]  DB max. statement length      : 1048576                                   34  0.133710
    4 ETW000  [     dev trc,00000]  DB max. array size            : 100000                                    75  0.133785
    4 ETW000  [     dev trc,00000]  use decimal precision as length                                           21  0.133806
    4 ETW000  [     dev trc,00000]  ABAPVARCHARMODE is used                                                   19  0.133825
    4 ETW000  [     dev trc,00000]  INFO : DBSL buffer size = 1048576                                         20  0.133845
    4 ETW000  [     dev trc,00000]  Command info enabled                                                      19  0.133864
    4 ETW000  [     dev trc,00000]  Now I'm connected to HDB                                                  18  0.133882
    4 ETW000  [     dev trc,00000]  00: hanaserver-HDB/00, since=20140602134916, ABAP= <unknown> (0)          30  0.133912
    4 ETW000  [     dev trc,00000]  } DbSlHDBConnect(rc=0)                                                    18  0.133930
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=30,arg_p=0000000000000000)             24  0.133954
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.133972
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F460)             22  0.133994
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.134012
    4 ETW000  [     dev trc,00000]  Connection 0 opened (DBSL handle 0)                                       36  0.134048
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=7,arg_p=000000000205F4B0)              25  0.134073
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.134090
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=63,arg_p=000000000205F2B0)             23  0.134113
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.134131
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F300)          12214  0.146345
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    32  0.146377
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=11,arg_p=000000000205F420)             26  0.146403
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.146421
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=22,arg_p=000000000205F390)             23  0.146444
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    37  0.146481
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=13,arg_p=000000000205F260)             29  0.146510
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.146528
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=24,arg_p=000000000205F210)             37  0.146565
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    35  0.146600
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=51,arg_p=000000000205F200)             40  0.146640
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=15)                                                   31  0.146671
    4 ETW000  [     dev trc,00000]  { DbSlHDBPrepare(con_hdl=0,ss_p=000000000205F4E0,op=3,da_p=000000000205F540)
    4 ETW000                                                                                                  46  0.146717
    4 ETW000  [     dev trc,00000]   -> buildSQLStmt(stmt_p=000000000205F4B0,da_p=000000000205F540,for_explain=0,lock=0,op=3)
    4 ETW000                                                                                                  89  0.146806
    4 ETW000  [     dev trc,00000]   <- buildSQLStmt(len=27,op=3,#marker=0,#lob=0)                            33  0.146839
    4 ETW000  [     dev trc,00000]   -> stmt_prepare(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0)           75  0.146914
    4 ETW000  [     dev trc,00000]  sc_p=0000000003AEAC40,no=0,idc_p=0000000000000000,con=0,act=0,slen=27,smax=256,#vars=0,stmt=000000000AD913E0,table=SVERS                        
    4 ETW000                                                                                                  46  0.146960
    4 ETW000  [     dev trc,00000]  SELECT VERSION FROM SVERS  ;                                              23  0.146983
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 PREPARE on connection 0                                   21  0.147004
    4 ETW000  [     dev trc,00000]  } DbSlHDBPrepare(rc=0)                                                  6174  0.153178
    4 ETW000  [     dev trc,00000]  { DbSlHDBRead(con_hdl=0,ss_p=000000000205F4E0,da_p=000000000205F540)
    4 ETW000                                                                                                  53  0.153231
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     25  0.153256
    4 ETW000  [     dev trc,00000]   -> activate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540)          25  0.153281
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  30  0.153311
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=0,col_cnt=0)                                    21  0.153332
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  54  0.153386
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
    4 ETW000                                                                                                  33  0.153419
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  33  0.153452
    4 ETW000  [     dev trc,00000]   -> exec_modify(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,bulk=0,in_out=1,da_p=000000000205F540)
    4 ETW000                                                                                                  36  0.153488
    4 ETW000  [     dev trc,00000]   -> stmt_execute(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,in_out=1,da_p=000000000205F540)
    4 ETW000                                                                                                  95  0.153583
    4 ETW000  [     dev trc,00000]    OPEN CURSOR C_0000 on connection 0                                      28  0.153611
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 SET InputSize=1                                           23  0.153634
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 EXECUTE on connection 0                                   22  0.153656
    4 ETW000  [     dev trc,00000]    execute() of C_0000, #rec=0, rcSQL=0, rc=0                            6404  0.160060
    4 ETW000  [     dev trc,00000]    CURSOR C_0000, rc=0,#rec=0,#dbcount=0                                   36  0.160096
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  33  0.160129
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=1,col_cnt=1)                                    21  0.160150
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,types=000000000205F518,#col=1,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  37  0.160187
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=72,rec_lng=144,db_lng=144
    4 ETW000                                                                                                  31  0.160218
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=144, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  31  0.160249
    4 ETW000  [     dev trc,00000]   -> allocIndicator(in_out=1,row_cnt=1)                                    21  0.160270
    4 ETW000  [     dev trc,00000]   -> allocData(in_out=1,size=1048576)                                      21  0.160291
    4 ETW000  [     dev trc,00000]   -> bind_type_and_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,arr_size=1,types=000000000205F518,da_p=000000000205F540)
    4 ETW000                                                                                                  45  0.160336
    4 ETW000  [     dev trc,00000]   -> exec_fetch(sc_hdl=0000000003AEAC40,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  41  0.160377
    4 ETW000  [     dev trc,00000]      xcnt=1,row_i=0,row_pcnt=0                                             20  0.160397
    4 ETW000  [     dev trc,00000]   -> stmt_fetch(sc_hdl=0000000003AEAC40)                                   20  0.160417
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 FETCH (xcnt=1) on connection 0                            23  0.160440
    4 ETW000  [     dev trc,00000]    next() of C_0000, rc=0                                                  27  0.160467
    4 ETW000  [     dev trc,00000]    fetch() of C_0000, #rec=1, rc=0, rcSQL=0                                28  0.160495
    4 ETW000  [     dev trc,00000]   -> deactivate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540,rc=0)
    4 ETW000                                                                                                  91  0.160586
    4 ETW000  [     dev trc,00000]   -> StmtCacheFree(DBSL:C_0000)                                            24  0.160610
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 CLOSE resultset on connection 0                           20  0.160630
    4 ETW000  [     dev trc,00000]  } DbSlHDBRead(rc=0)                                                       34  0.160664
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=43,arg_p=00000001400FAB06)             25  0.160689
    4 ETW000  [     dev trc,00000]  INFO : SAP RELEASE (DB) = 740                                             19  0.160708
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    16  0.160724
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=41,arg_p=00000001400FAB98)             49  0.160773
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.160792
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002055888)             22  0.160814
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.160832
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002055880)             22  0.160854
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    26  0.160880
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=52,arg_p=00000000020558F0)             23  0.160903
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.160920
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=20,arg_p=0000000141FC74F0)             99  0.161019
    4 ETW000  [     dev trc,00000]  INFO : STMT SIZE = 1048576                                                21  0.161040
    4 ETW000  [     dev trc,00000]  INFO : MARKER_CNT = 32767                                                 18  0.161058
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.161077
    4 ETW000  [     dev trc,00000]  NTAB: SELECT COMPCNT, UNICODELG FROM DDNTT WHERE TABNAME = 'SVERS'...
    4 ETW000                                                                                                  38  0.161115
    4 ETW000  [     dev trc,00000]  { DbSlHDBPrepare(con_hdl=0,ss_p=0000000002055160,op=3,da_p=00000000020551B0)
    4 ETW000                                                                                                  31  0.161146
    4 ETW000  [     dev trc,00000]   -> buildSQLStmt(stmt_p=0000000002055180,da_p=00000000020551B0,for_explain=0,lock=0,op=3)
    4 ETW000                                                                                                  32  0.161178
    4 ETW000  [     dev trc,00000]   <- buildSQLStmt(len=63,op=3,#marker=0,#lob=0)                            23  0.161201
    4 ETW000  [     dev trc,00000]   -> stmt_prepare(sc_hdl=0000000003AEACD8,ss_p=0000000002055160)           38  0.161239
    4 ETW000  [     dev trc,00000]  sc_p=0000000003AEACD8,no=1,idc_p=0000000000000000,con=0,act=0,slen=63,smax=256,#vars=0,stmt=000000000AE09690,table=DDNTT                        
    4 ETW000                                                                                                  38  0.161277
    4 ETW000  [     dev trc,00000]  SELECT COMPCNT, UNICODELG FROM "DDNTT" WHERE TABNAME = 'SVERS' ;          21  0.161298
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 PREPARE on connection 0                                   19  0.161317
    4 ETW000  [     dev trc,00000]  } DbSlHDBPrepare(rc=0)                                                  6453  0.167770
    4 ETW000  [     dev trc,00000]  db_con_test_and_open: 1 open cursors (delta=1)                            30  0.167800
    4 ETW000  [     dev trc,00000]  db_con_check_dirty: 1 open cursors, tx = NO , bc = NO                     18  0.167818
    4 ETW000  [     dev trc,00000]  db_con_check_dirty: db_con_dirty = YES                                    16  0.167834
    4 ETW000  [     dev trc,00000]  { DbSlHDBBegRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
    4 ETW000                                                                                                  35  0.167869
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     23  0.167892
    4 ETW000  [     dev trc,00000]   -> activate_stmt(sc_hdl=0000000003AEACD8,da_p=00000000020551B0)          23  0.167915
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.167947
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=0,col_cnt=0)                                    23  0.167970
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  34  0.168004
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
    4 ETW000                                                                                                  30  0.168034
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  31  0.168065
    4 ETW000  [     dev trc,00000]   -> exec_modify(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,bulk=0,in_out=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.168097
    4 ETW000  [     dev trc,00000]   -> stmt_execute(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,in_out=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.168129
    4 ETW000  [     dev trc,00000]    OPEN CURSOR C_0001 on connection 0                                      20  0.168149
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 SET InputSize=1                                           19  0.168168
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 EXECUTE on connection 0                                   20  0.168188
    4 ETW000  [     dev trc,00000]    execute() of C_0001, #rec=0, rcSQL=0, rc=0                            5712  0.173900
    4 ETW000  [     dev trc,00000]    CURSOR C_0001, rc=0,#rec=0,#dbcount=0                                   34  0.173934
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.173966
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=1,col_cnt=2)                                    21  0.173987
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,types=0000000002055240,#col=2,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  34  0.174021
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=2,#int=0,#llong=0,#uc=0,rec_lng=16,db_lng=4
    4 ETW000                                                                                                  30  0.174051
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=16, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=65536)
    4 ETW000                                                                                                  32  0.174083
    4 ETW000  [     dev trc,00000]   -> allocIndicator(in_out=1,row_cnt=65536)                                20  0.174103
    4 ETW000  [     dev trc,00000]   -> allocData(in_out=1,size=1048576)                                      30  0.174133
    4 ETW000  [     dev trc,00000]   -> bind_type_and_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,arr_size=65536,types=0000000002055240,da_p=00000000020551B0)
    4 ETW000                                                                                                  36  0.174169
    4 ETW000  [     dev trc,00000]  } DbSlHDBBegRead(rc=0)                                                    24  0.174193
    4 ETW000  [     dev trc,00000]  { DbSlHDBExeRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
    4 ETW000                                                                                                  35  0.174228
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     20  0.174248
    4 ETW000  [     dev trc,00000]   -> exec_fetch(sc_hdl=0000000003AEACD8,bulk=0,da_p=00000000020551B0)
    4 ETW000                                                                                                  33  0.174281
    4 ETW000  [     dev trc,00000]      xcnt=1,row_i=0,row_pcnt=0                                             20  0.174301
    4 ETW000  [     dev trc,00000]   -> stmt_fetch(sc_hdl=0000000003AEACD8)                                   20  0.174321
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 FETCH (xcnt=1) on connection 0                            20  0.174341
    4 ETW000&

    Hi,
    Could you check for SAP Note   1952701 - DBSL supports new HANA version number
    Regards,
    Gaurav

  • Webelements : does not support when i add the data sourcce& view in HTML

    hi Masters,
    i am using sap crystal reports 2008 and when i add the data source and add tables to the report and i use web elements functions as my selection screen then it does not show i mean the script remains as it is and when i take out my data source
    then it works when i view it in HTML VIEWR.
    how can i make it to work despite me using the data soruce.
    thank you,
    pasala

    hi Pasala,
    this is due to the sap integration kit which does not support pass-through html. webelements require pass-through html in order to show up as html.
    here's what you can try though:
    1) install the latest sap integration kit on your boe system machine(s)
    2) if the above does not solve the issue follow the steps at the bottom of [this thread|WebElements: HTML not rendering when using Bex Query as Source]
    3) if 2 above doesn't work then see [this thread |Re: WebElements only show HTML tags (even after following WebElement guides)]as a last resort
    hopefully step 1 & step 2 will solve the issue.
    jamie

  • Creative's Vista support is so bad - My horrible experience

    All,?Have used Creative products for years, but how they are handling Vista is bordering on criminal. I do not understand how they basically tell good customers to take a hike with such terribly bad Vista support. Here is my story:?Using my SB Li've card in XP. Works GREAT!? Fantastic card, no problems. Not that old of a card either. Seems Creative will not be making Vista drivers for it. WHY??So go and buy a Audigy SE card. Plug in, can not get to work. Find there is no Vista driver.
    Go out and buy a X-Fi Extreme Audio card, as I saw there was a Vista driver for it. Get home, find out that is not true, only for 32bit, not 64bit.
    Wait, find this section. Find the Audigy SE has a beta Vista driver, whoops only 32bit again.
    Vista (released version) has been out for several months (I have had my Microsoft Developers Network Release Canidate running now for well over a month). And beta's have been out forever.
    There is NO excuse for a company as big as Creative not to have drivers working and ready for all current cards, and fairly recent cards (like SB Li've) by at least the public release date. None at all.
    Funny thing, plugged in the built in sound module on my DFI nF4 SLI-DR motherboard (I kept it unplugged while I used the SB Li've card). Booted Vista, and drivers loaded without my doing a thing!? Works fine...
    - John ConnorMessage Edited by asterix22 on 02-03-200702:02 PM
    Message Edited by asterix22 on 02-03-200702:03 PM

    I'm on the side of Creative Labs here, and I'll say what they're probably thinking as they desperately work to get things up to speed for us. For starters, I assumed that if you chose to be one of the first to purchase Windows Vista (like myself), you were prepared to undergo a rocky compatibility period with some of your hardware, and were willing to wait it out. After numerous new versions of Windows....well hell, I figured?we all have come to expect this kind of thing at first launch. I guess I was wrong.
    Secondly, I assumed that if you chose to be one of the first to purchase Windows Vista, but you were NOT prepared to undergo a rocky compatibility period with some of your hardware, than you would have perused this website's news, forums, drivers page, etc. for a little while?after the Vista release date to verify that everything?is?going to work?the way you "need" it to before you even put that Vista installation DVD in your dri've. And third....you consumers aren't working in the Creative Labs office. You've never attended their meetings. You've never been in on exactly how much work goes into keeping communication going with Microsoft, and you?dam sure don't know exactly what has to go into making these sound cards work with the types of Directsound changes that Microsoft has made. Don't sit there remotely from your apartment and tell a Creative Labs employee what they've been doing with THEIR time since they got the final info from Microsoft they needed to get to work on the new drivers. You say "fix it!" They say "we're working on it." What the hell else do you want?Fourth....don't forget that there are plenty of Creative Labs employees who have home computers with creative labs hardware in them, and those employees want their stuff working just as much as you. So here's your solution if this compatibility issue is really slowing down your life. Uninstall Vista. Put your XP back on. Enjoy your fully functional sound just the way you had it and meanwhile, keep checking back here periodically for updates on their progress. CL and CL mods.... I trust you. You've been around for years and you've offered up excellent hardware and software for as many OS's as I can remember. I'm not an expert in your field, so I'm not going to sit here, like some, and conjure up some self-gratifying scenario in my head of you guys doing piss poor work when I don't know jack about what it takes to get up to speed, especially if Microsoft has had you switching gears up until November. Your track record speaks for itself. You've always provided the best in sound. Guys, give CL a break. They've earned their stripes. In the meantime, go back to XP or thank them for the beta drivers and the EAX workaround. They did it for YOU. P.S. But Creative...just one thing. For now on, could you try to make your list of drivers and software updates for each card a little less confusing on the drivers pages? The XP driver/softwares sections are a mess! <img height="6[/img] width="6" src="http://forums.creative.com/i/smilies/6x6_smiley-wink.gif">

  • I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

    i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

    Try downloading the trial. It ought to detect that you have a 64-bit system.
    You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

Maybe you are looking for

  • Site error only on my G5 iMac

    I previously posted this question and am still missing something. I'm reposting in hopes someone can further explain to me what the problem is. This is the original topic: http://discussions.apple.com/thread.jspa?threadID=771703&tstart=150 I created

  • Call Function in CRM to fetch invoice no. for given cancelled invoice no.,

    Hi,    Can anybody suggest me Function module in CRM that gives details of billing document when its corresponding cancelled billing no. is given as input. Ex. Invoice no. is 'X'.       When 'X' gets cancelled , a document gets generated of type canc

  • Take 2 digits after the comma of a number of type float

    Hello everybody, I want to take 2 digits after the comma of a number of type 'float'. For example I want to get 3,57 instead of  3.5714285714285716E+00 Thanks & Regards

  • Long distance from exchange

    Hi. currently live about 9 miles from main exchange have been told to far to get any broadband. A bt inifinity (green Box) is about 3.5miles from me, does any one know how far infinity can go or if the distance will expand.    Or will this boost bt t

  • How do I stop it printing 1/6 (bottom RH corner) of page 6 times instead of printing the whole page?

    When I print a PDF downloaded from the internet it chops the bottom RH corner of the page and reproduces it 6x (2x across the page and 3x down the page), instead of printing the whole page, this is driving me mad, does anyone know how to stop it? I h