Domain and Browser Issues

My wife recently developed a website for her art gallery using iWeb. We upload the website using the mobileme client - which uploaded the website with no problems. A couple of days later we purchased a domain: www.intensebluegallery.com and would like to use that exclusively for the site.
Strangely, we can get to her website www.intensebluegallery through the Safari browser - but we're unable to get to the website using Internet Explorer.
Is there something we need to fix? Can anyone help? Thanks a million!

Welcome to the Apple Discussions.
but we're unable to get to the website using Internet Explorer.
What do you get when you try to load your site in IE? Does it just lock up?
IE is notoriously bad when it comes to adhering to web standards for code, etc. and iWeb sticks to them very closely. One of the issues with IE and iWeb sites is the navbar. It is javascript based. One of the suggestions to make iWeb more compatible with IE is to hide the iWeb navbar and create your own Text Based Navbar. However, it can be a pain to update every page if you add a page to the site.
One of our more experienced users here, Roddy, uses Web Site Maestro to optimize his files before uploading to the server. It can reduce a page's size by nearly 40 percent in some cases which is a big help with IE. IE will freeze if a page has a lot of images on it. I've started using it with some of my sites on MobileMe and it will optimize the files and upload only those that have been changed or added.
Look for some of Roddy's posts about Web Site Maestro or about Internet Explorer to get more info on the subject.
OT

Similar Messages

  • E72 Email and Browser Issue

    Hi Guys,
    I have recently updated to the newer firmware version in my Nokia E72.. It had been working well for the past few weeks. Now i have a problem in connecting to the internet using my WLAN network in the default web browser. I have added my WiFi connection to the internet group by going thro' Ctrl panel-->Settings-->Connection-->Destinations-->Internet and have also set it as the default connection. In the nokia web browser too, i have selected the access point as "Internet". But whenever i try to access any site, it says, "Connnection not available". What could be that??
    As for the issue with the email, it works fine.. i am able to downloiad and view mails.. but i am unable to change the access point settings. I have used my WLAN name as the default access point and unable to change it.
    One more thing that I found out just nw is that whenever i use email i.e as long as the WiFi connection remains live via email, i am able to browse the sites using the default web browser. but the moment i disconnect mail, the web browser returns the phrase, "Connection not available" as before. This sounds peculiar..and these two issues are someway connected to another..Doing a hard/soft reset may solve this issue.. but it would be better if someone can help me with a solution to this problem..
    Regards
    Robert

    Was reading this article before. I think RIM is aware of other competing browser's features, so they're taking steps to get the BlackBerry Browser up to date
    http://www.internetnews.com/mobility/article.php/3836386/BlackBerry+May+Have+New+Mobile+Browser+by+2...
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • .local domain and autodiscover issues

    I want to preface this by saying I am a new administrator.
    Our SSL cert recently expired, and since .local domains can no longer be on certs, were registered a CA cert with autodiscover.domain.com and mail.domain.com. This new cert was successfully applied, but whenever someones opens their e-mail they get a warning
    about the name on the server not matching the cert. I
    I'm pretty sure this is juts a few DNS records I need to update but I don't know which ones and really need some guidance.
    Thanks for your time.

    So what you are saying is that his current DNS for company.com (which his internal users use for external access) needs to be duplicated internally, then modified to support his internal email access?  I've set up many systems where internal DNS and
    external DNS hosted the same name, and it is far from simple as "a new zone takes less than a minute to create".  How do you handle internal access to external sites (which is currently working just fine with his external DNS)?
    To answer your question, my recommendation is that his internal clients use AutoDiscover to gain their internal settings. Keep in mind that while the Exchange server may be in the .local domain, the SMTP domain they host is a .com domain. And since his servers
    are in a domain, any domain-attached Outlook client will be able to access the mailbox successfully.
    Just create a new DNS record pointing to the external host.  Or get a new domain name that doesn't have external websites, then create a new DNS zone for that.
    Alright, so with your recommendation - he updates his clients to use Autodiscover, which they are likely already using, to gain internal settings.  And then what do you configure the internal URLs as?  
    For example - Autodiscover.
    You set the AutoDiscoverServiceInternalURI to servername.domain.local -> he still gets a cert prompt every time he opens Outlook.
    You set the AutoDiscoverServiceInternalURI to mail.domain.com to match the certificate -> Now ALL autodiscover requests from all clients are going out to the internet, then back into the Public VIP.  
    Same with EWS.  And this is assuming he's using RPC/TCP rather than HTTP.  So then he's either going to get prompts for cert every time he opens outlook and checks OOF or mailtips, or all internal clients are going to use the external VIP for Autodiscover
    and EWS. 

  • Java and browser issues - anyone use Webtrends?

    I switched from pc to mac 2 months ago. Have a website and view my web traffic reports with Webtrends as provided by my host. Both Safari and Firefox use version of Java that don't allow prior/older versions to function. Therefore, the Webtrends reports, which work on an older version of Java, aren't viewable. Apple's suggestion was that I try loading Internet Explorer and using that. Does anyone have any experience with the problem and know of a work-around? There must be loads of web developers who have figured out how to massage this. I'm not a techie or geek by any means, merely a dilettante : ) Any simply explained solutions or suggestions would be appreciated.

    The
    solution: switching hosts tout d'suite.
    That sounds like the best idea. A web host who is using 5 year old software and isn't upgrading? Would make me very nervous. It means they are lazy, cheap or incompetent. Maybe all three. Doesn't inspire confidence that they can keep things going or have any kind of protection at all from hackers. If their security is 5 years old too then just about anyone could walk around in your stuff.

  • Nokia 500 and Belle Refresh: browser issues.

    Greetings.
    The Belle Refresh was indeed a welcome refresh for this low-to-midrange phone. However, there is a serious issue with the browser.
    With the update to Qt 4.8, you inherited QtWebKit, an amazing browser I know very well. In a desktop, it's fast, although it eats more memory than Firefox. However, in a cell phone like the 500, with limited amounts of RAM, this browser freezes the phone, due to the lack of memory. I'm also sure this browser can and will break phones with more memory and Belle FPx, since I've made QtWebKit use more than 1 GB of RAM in a computer running KDE.
    There is a way to avoid this, called "user agent". Opera Mobile avoids this scenario by telling pages through user agent "hey, don't be hard on me, I'm browsing this from a cell phone", and pages adjust themselves to that scenario. However, you didn't tweak the user agent in your browser.
    If you add no user agent tweaking, full HTML5 support, Flash Lite support (the much higher specced iPhone 4S doesn't support Flash), and low memory, you get a nightmare scenario.
    1. The webpages send their complete, full featured DESKTOP versions to my Nokia 500.
    2. QtWebKit supports everything, so, it makes a faithful attempt to properly render the page, even with Flash apps.
    3. Nokia 500 has only 70-80 MB of RAM free for apps to use.
    4. Boom.
    Can you release a hotfix for Belle Refresh, changing the user agent of Nokia Browser to something that can trigger the mobile version of web pages? In that scenario, QtWebKit will eat much less memory and everyone will be happy. And please, can you do this for everyone using Belle Refresh?

    I can confirm serious browser issues with the Belle refresh on a C6-01 device. The crash is so severe that only taking out the battery helps. It typically occurs when scrolling larger, feature-rich (and image-rich) webpages, so far I've seen this only on mobile connections (Edge, Umts), but that may be due to lack of testing with WLAN. (Where I've got WLAN I've usually a more powerful device as well..

  • Cache and performance issue in browsing SSAS cube using Excel for first time

    Hello Group Members,
    I am facing a cache and performance issue for the first time, when I try to open a SSAS cube connection using Excel (using Data tab  -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users
    system (8 GB RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
    We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cubes - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after
    daily cube refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (16 GB RAM), it takes 2 odd minutes to open the cube.
    Is there, any way we could reduce the time taken for first attempt ?
    Best Regards, Arka Mitra.

    Thanks Richard and Charlie,
    We have implemented the solution/suggestions in our DEV environment and we have seen a definite improvement. We are waiting this to be deployed in UAT environment to note down the actual performance and time improvement while browsing the cube for the
    first time after daily cube refresh.
    Guys,
    This is what we have done:
    We have 4 cube databases and each cube db has 1-8 cubes.
    1. We are doing daily cube refresh using SQL jobs as follows:
    <Batch xmlns="http://schemas.microsoft.com/analysisservices/2003/engine">
    <Parallel>
    <Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
    <Object>
    <DatabaseID>FINANCE CUBES</DatabaseID>
    </Object>
    <Type>ProcessFull</Type>
    <WriteBackTableCreation>UseExisting</WriteBackTableCreation>
    </Process>
    </Parallel>
    </Batch>
    2. Next we are creating a separate SQL job (Cache Warming - Profitability Analysis) for cube cache warming for each single cube in each cube db like:
    CREATE CACHE FOR [Profit Analysis] AS
    {[Measures].members}
    *[TIME].[FINANCIAL QUARTER].[FINANCIAL QUARTER]
    3. Finally after each cube refresh step, we are creating a new step of type T-SQL where we are calling these individual steps:
    EXEC dbo.sp_start_job N'Cache Warming - Profit Analysis';
    GO
    I will update the post after I receive the actual im[provement from UAT/ Production environment.
    Best Regards, Arka Mitra.

  • Using Firefox, I can login and browse my financial institution (NFCU) but I cannot pay bills. When I click the bill pay tab, the tab loads 66% and then hangs. Has anyone else reported having this issue?

    Using Firefox, I can login and browse my financial institution website (NFCU) but I cannot pay bills. When I click the bill pay tab, the tab loads about 66% and then hangs (loading). I have let it load until NFCU asks me if I want to cancel the session, a much to long of a load time. Has anyone else reported having this issue with NFCU or Mozilla Firefox 3.6.18?
    I have also posed the question to NFCU, currently awaiting response and will share what was given.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Yahoo Homepage is in EST and not PST like my seetings are in. It changes to the next day when it is not midnight yet. Please fix. Yahoo say it is a browser issue!

    On the Yahoo Homepage the day, date, and time are in EST and I am in PST. The day, month, time, and date, changes to the next day at 9pm and it is not midnight yet.
    Example: Monday, February 13, 2012, then at 9pm tonight, it will change to Tuesday, February 14, 2012, before it hits midnight on Tuesday, February 14, 2012. Please fix.
    I have been in contact with AT&T and Yahoo for the past month trying to get this fixed so it doesn't affect my e-mail time. Now both are saying it is a browser issue, and that is you guys. I can't believe I am going through all this just to get something fixed....it is amazing! Our e-mail is:[email protected]
    Thanks,
    Tim

    Try http://kb.mozillazine.org/Time_and_time_zone_settings

  • Browser and email issues with OS 10.9.4

    Had a problem that I thought had been solved.  See thread here: Just installed OSX 10.9.4 - have browser and email issues
    Now a week or so later, it's back.  Same symptoms.  I have followed the procedure posted by Linc Davis.  Anybody have further ideas?
    Don Hutchins

    If you are using Safari, try going to Safari/Preferences/Advanced and set the develop menu to show. Go to the develop menu and select Empty Caches.
    If that doesn't work, Safari/Reset Safari/Remove all web site data.
    For Mail, try:
    Do a backup.
    Quit Mail.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Go to Library/Containers/com.apple.mail.  Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    Restart, re-launch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. You can then put the folder in the Trash. If the problem remains, return the folder to where you got it replacing the one that is there. 
    Information learned from Linc Davis. Thanks to leonie for some information contained in this.

  • Just installed OSX 10.9.4 - have browser and email issues

    After updating the OS to X 10.9.4, I am now getting sporadic browser and email issues.
    Email will send one message from each account, then locks up and the message is "authentication refused".
    Browser will bring up an internet page or sometimes several, then will lock up and no further URLs can be accessed.
    Both issues are temporarily solved by rebooting the machine - but recur almost immediately.
    I am pulling my hair out.  Any thoughts?
    Don Hutchins

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Domain Splitting and iDisk issues

    First, my apologies if my question has been answered previously. I did search the forums, but didn't find anything promising.
    I have split my large domain.sites file into four separate domain.sites file, following the guidance of folks on this forum. Each domain.sites file contains two sites; a one-page "index" site with links to all my sites and one of my "real" sites. (the index site has a slightly different name in each domain.sites file so I don't ovewrite).
    But now I'm having a dickens of a time keeping all the sites online at the same time. I did some searching in these forums and discovered that I have to do two rounds of "publish all." Since these were existing files, the first time I told one domain file to "publish all," it erased the sites I had deleted from that file. After the second round of publishing, the sites have all come back (except for my biggest one, which I haven't published a second time; I'll do that overnight).
    It looked like I have everything working...until I synced my iDisk. Then one of my sites disappeared again! Plus, some of my sites that I can access on-line don't show up on my iDisk.
    I typically leave my iDisk mounted on my desktop. Do I need to change this if I'm working with multiple domain.sites files?
    Thanks for any help you can provide!

    Thanks to both of you for your help. I after one last publish last night, I got all my sites on line.
    Syncing my iDisk didn't work as well, though. Somehow I ended up with two copies of my iDisk on my desktop: one with the typical globe icon and another with a generic "drive" icon. The globe one was supposedly the current one, saying it had sinced this morning, but it only had some of my sites on it. (Oddly enough, it had each of the index sites, from all four domain.sites files, but not all the "real" sites from those files) The plain "drive" icon idisk had all the files on it. I couldn't get rid of either of them without restarting. But restarting seemed to set things to rights.
    I've taken Varkgirl's advice and don't have my iDisk on my desktop. I didn't really access it much anyway.
    Would it be of benefit to others for me to spell out the steps I took to split my domains and have a site index always show up as the site for the short url? I'd adjust it with some of the things I've learned in the process. I know there are good instructions for domain splitting in this forum already, but I don't know that my approach to a sites index with multiple domains has appeared on the forums before.

  • Using a Mac, Firefox does not allow me to use the vertical scroll bar real-time in Godaddy webmail. It lags and jumps. Godaddy says it is a browser issue. Does not happen in Safari with Mac OS 10.4.11 or on PC w/windows vista.

    The problem is not my server (Comcast) as it does not happen on Safari when trying different websites as well as Godaddy.com or my Godaddy webmail. The problem is only when using my Mac OS X 10.4.11 (not my Windows Vista PC) in Firefox. I only began noticing this recently. Godaddy says this is a browser issue with my Mac as they cannot replicate it.
    == URL of affected sites ==
    https://login.secureserver.net/index.php?app=wbe&clearcookies=1

    The problem is not my server (Comcast) as it does not happen on Safari when trying different websites as well as Godaddy.com or my Godaddy webmail. The problem is only when using my Mac OS X 10.4.11 (not my Windows Vista PC) in Firefox. I only began noticing this recently. Godaddy says this is a browser issue with my Mac as they cannot replicate it.
    == URL of affected sites ==
    https://login.secureserver.net/index.php?app=wbe&clearcookies=1

  • .Mac and Safari issue (no other browser)

    I am running Safari 3.1 on Mac OS X 10.5.2 and the issue I am having is Safari related, and is not the fault of .Mac. The problem does not exist in Firefox.
    The problem is viewing synced .mac bookmarks. System Preferences is set to automatically synchronize my .mac bookmark data, but when I use Safari and log into www.mac.com, and click on the bookmark link on the top, I click "Open Bookmarks" and Safari redirects to the .mac homepage instead of showing my list of bookmarks. It has happened sometime after the 3.1 update, but I cannot say exactly when.
    I have removed the Safari folder inside the User Library, and also the Preferences file, both to no effect.
    But I have made a new user, logged into my account and Safari has worked properly.
    Does anyone know what might be causing this problem, or what I can remove to fix it.

    I am having a similar issue. Have you found a solution for this?

  • "Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

    Team,
    I am trying to Install Exchange on my Lab, getting below error
    message.
    The Schema Role is installed on Root Domain and trying to install
    exchange on Child domain.
    1 Root Domain - 1 Child domain. both are located on single site.
    “Setup encountered a problem while validating
    the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
    replication to complete.”
    Followed below articles:
    http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
    http://www.petenetlive.com/KB/Article/0000793.htm
    transferred the schema roles to different server on root domain, still no luck.
    can someone please help me.
    regards
    Srinivasa k
    Srinivasa K

    Hi Srinivasa,
    I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
    1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    After finishing this,
    2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
    3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
    4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
    5. Finally, run the setup program
    Hope this will help you
    Regards from Visit ExchangeOnline |
    Visit WindowsAdmin

  • IWeb pages reverting to older version- not a browser issue, deleting prefs/caches no help

    Hi everyone, forgive me if this is a newb question but I've scoured the internet for answers and all of them I've already tried with no luck. I'm using iWeb and encountering a problem that has me completely stumped. I'm trying to publish changes to my site, (I do not use mobileme, I publish to disk and upload files via Fetch) and for some reason something is changing my html files when I try to upload them. The html files are correct on my hard drive when I publish them, and yet when I upload them, they revert to the older version. This is not a browser issue, as I've cleared my cache, refreshed and tried using Safari, Firefox and Chrome with no luck. I've also tried 're-setting' iWeb by deleting iWeb preferences/cache, and tried moving the domain file from application support, creating a new website, deleting it and then re-loading the old site. Nothing, still the old site. It's new in iWeb, new when I open the html files on my drive, and old as soon as I upload.
    I seem to remember having this problem before, and what I found was iWeb's cache kept replacing my new pages with the old ones every time I wanted to upload them. 'Re-setting' iWeb did the trick then, but it's not doing it now. Any ideas on what is going on? It's a little disconcerting seeing a file correct on the disk and then change itself, while uploading, into an incorrect version.
    Using:
    iWeb 3.0.3
    Mac OS 10.6.7
    Mac Pro 2.66 Dual core

    If you make changes to a page there are files in the Scripts folder that get updated and must be uploaded also.  Depending on what you're using to up load the files it can be setup to upload just those new or modified files.
    Cyberduck is a free FTP client that works very well and if used in conjunction with this tutorial will upload only those new or modified files: #2 - Uploading only those new or newly edited and published files when using a 3rd party FTP client
    OT

Maybe you are looking for