Don't believe what you read... there's no error.

The only error I've found w/ iWeb is it SAYING there's an error...
If you publish your site and get the dreaded error massage just leave iWeb open and sync your iDisk completely then close iWeb and sync your iDisk one more time, just to make sure.
Make sure you empty your Browser cache files and I clear my History too, then look at your site.
Even though I get the error message my site is still updated as long as my iDisk is synced-up. In fact I did a little remodel on some of my pages at http://www.iWebTricks.com last night and ALL the changes went through despite the "fake" error message.
It's true the next time you Publish it creates the "red" pages over but it doesn't seem to upload those pages given that when looking at the files that are synced to the iDisk it appears as though only changes since the last time you Published (error or no-error) are synced.
I'm happy enough that I can at least get my site updated for the time being until Apple gets this fixed but the main thing is getting your site out there which still can be done w/ iWeb although somewhat troublesome. But then again manually inserting HTML onto every page after every Publish isn't a walk in the park either...

I've tried this advice and the advice on your website, but I STILL can't get the website to publish!
Now on iWeb the icons are blue, which should show mean it has published, but I've checked the website on Safari both using the 'visit site' button and entering the url (I'd cleared the cache and the history), as well as checking it from Netscape on this computer and from IE on another computer.
Am at end of my tether, as have paid for .mac membership but am not getting what I want from it.
I've tried publishing at various times of day but no luck.... I've not been able to publish anything at all on the website yet, have got 1.1.1 and all the work on the website has been done on 1.1.1.
Any help would be much appreciated!
MBP Mac OS X (10.4.6)

Similar Messages

Lied to by customer retention - Don't believe what you are being told

I called in on July 2, 2015 to cancel my account as my 1 year deal was about to expire and my rates were to nearly double. I was transferred to customer retention and was told they would upgrade me from u200 to u300 for 3 months but keep my bill at the same rate. My new bill arrived yesterday and it was doubled. I called customer service who explained that there must have been a miscommunication or that I must have misunderstood what the offer was. I couldn't have been more explicit about not wanting to increase my bill and the account representative couldn't have been clearer that my bill was not going to go up. I am reporting this fraud to the FCC today and cancelling my account.

I could care less about having U300 which is what I told customer service to begin with. They told me they could upgrade me to U300 and I would pay the same rate as U200. I agreed. It wasn't until the end of the conversation that I was told it would only last for 90 days and that I would need to call back in to see about another offer.

Hello, what if forgot my MacBook Pro's password and my iPhone's password. i just don't know what to do. there so many necessary thing on my phone. help me please as soon as possible.

hello, what if forgot my MacBook Pro's password and my iPhone's password. i just don't know what to do. there so many necessary thing on my phone. help me please as soon as possible.

Here is how to reset login password for MacBook:
http://www.macworld.com/article/2013764/how-to-reset-a-login-password.html
and here is how for iPhone:
http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e

Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

Have you printed to this printer from 10.10 before? If so, check your connections.

Adobe reader: there was an error opening this document. this file cannot be found.

Windows XP Professional sp2 machine
512 memory
ie sp2
when opening two pdfs from a website links receive the error, "there was an error opening this document. this file cannot be found"
If you save the file to the pc, then open the .pdf it opens ok
other pdfs open ok from browser from same website and different websites
had customer try on another's machine; the two pdfs opened ok
tried Adobe Reader 8.1, 9.0, and Adobe Professional 8.0
uninstalled reader and professional; deleted directories; reinstalled reader and professional(placed into a separate directory); same error
On the machine tried admin accounts, under customer's profile made admin account, renamed the customer's account so that another account was freshly generated, all generated the same error.
Ran ccleaner to clean up files in the registry and temporary internet files, then repaired adobe - same error
repaired internet explorer - same error
scoured web for same error but most were applications trying to open the pdfs, a few errors were for programming php, a lot of questions but few answers in context of current issue. the ccleaner and repairing ie were resolutions i found on the web.
nothing was listed in msoft's ie knowledgebased searched.
any help would be appreciated.

I get the same message when I try to open a pdf attachment in my free AOL e-mail account. This problem just started today for some unknown reason. I have Adobe Reader 9 and never had a problem before. If I forward e-mails with a pdf attachment to my Road Runner account, I can open it with no problem. I can't seem to find any answers to this problem. Frustrating! HELP!!!

HT201320 I use my college's email address through outlook and I don't know what you use for the incoming and outgoing host?

My email is though the college where I work. We use Outlook, and I am trying to set up my email but I am not sure what to use for my incoming and outgoing host information.

Ask your college. Most likely the same settings as you have set in Outlook.

Bookmark window disapears. WHen I klick on it it is transparent, it is possble to klick on the links in it. But you don't see what you are klicking.

I open the bookmarks ant then the window whit all of the links will be there for a milisec.
Then it is just open but transperend.
I can click on the links but i don't see whitch link it is.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"

Why do I need this update?? I don't understand what you are offering

I'm afraid that this system will be too complex for my limited ability on computers. All I want is to be able to get my mail without too much difficulty and find my desk top unchanged.,

QuickTime Player 7 was released in April, 2005 and if you purchased a Pro upgrade it is still valid today.
Updating QuickTime Player will not remove your Pro upgrade.

What happens if there is an error during a commit?

What happens if an error occurs while committing a transactional resource?
          For example, say the transaction manager successfully sends a commit
          notification to two transactional resources at the end of a transaction, but
          then gets an error while trying to commit a third one. It can't rollback the
          first two because they've already been committed. Is it up to the client to
          perform forensics in this case, or is it too rare to account for?
          Bob


Bob,
          This is exactly the problem that is solved by "2 phase commit" of transactions.
          The JTA transaction manager will not tell the 3 resources to commit. Instead,
          it will tell them all to "prepare" - it is the resources' responsibility to
          confirm that they have prepared only when they have written the post transaction
          stast to disk and KNOW that they can commit, if required, in the future.
          When all 3 prepares have returned OK, the transaction manager writes a record to
          disk confirming its decision to commit. Only then will it go ahead and tell the
          resources to commit.
          Hence, in your secnario, the 3rd prepare will fail and the transaction manager
          will tell the other 2 resources to roll back.
          Of course, if something catastrophic happened (disk head crash, fire...) then a
          commit may fail, leaving the results inconsistent as in your scenario. This is
          termed a "Heuristic completion" and you need to send in the DBAs to take care of
          the forenzics that you are worried about.
          For a more detailled discussion of this, take a look at
          http://dev2dev.bea.com/articlesnews/discussion/thread.jsp?forum=1&thread=106
          I hope that helps,
          Peter.
          Got a Question? Ask BEA at http://askbea.bea.com
          The views expressed in this posting are solely those of the author, and BEA
          Systems, Inc. does not endorse any of these views.
          BEA Systems, Inc. is not responsible for the accuracy or completeness of the
          information provided
          and assumes no duty to correct, expand upon, delete or update any of the
          information contained in this posting.
          Bob Lee wrote:
          > What happens if an error occurs while committing a transactional resource?
          >
          > For example, say the transaction manager successfully sends a commit
          > notification to two transactional resources at the end of a transaction, but
          > then gets an error while trying to commit a third one. It can't rollback the
          > first two because they've already been committed. Is it up to the client to
          > perform forensics in this case, or is it too rare to account for?
          >
          > Bob
          >
          >
          >

I downloaded the latest Lion firmware update and now all pdf's I download show this error in Adobe Reader "There was an error opening this document. There was a problem reading this document (14)."

Can anyone help me?

Same error here - started a couple of weeks ago.
Surely Apple are able to help fix this, it's driving me nuts!
I've deleted Adobe reader and re-installed to no avail.
Files display correcly in Safari but not in Adobe or Preview.
Very frustrating.
Cheers.

What do you read?

Other than each other's posts in the Adobe forum, I was wonder what you read to keep current (magazines, web sites, books, etc.).
I have a subscription to VideoMaker magazine and periodically hit up the
Digital Video Editing website. I like Videomaker. Although sometimes simple, simple is sometimes refreshing (I still play solitaire on the PC). Plus, it's easier to take the magazine into the bathroom than to try and lug the desktop in to surf....

Reading is one of the areas I have to say I hate my computer for. I used to be an avid reader (n.b that's small a avid, not big A Avid). I'd read just about anything. Now my reading has dried up to the point of almost non-existence. In the last six months I think I could count the number of books I've read on one hand, maybe two.
Non-Linear Editing: Storytelling, Aesthetics and Craft by Bryce Button.
In the Blink of an Eye by Walter Murch.
Sam's Teach Yourself 3D Studio MAX 3 in 24 Hours by... Sam?
A Brief History of Time (reread) by Stephen Hawking
Narrative Fiction: Contemporary Poetics by Shlomith Rimmon-Kenan. An old University textbook I thought I should finally get around to reading.
E=MC2: The Great Ideas that Shaped our World by Pete Moore.
Egyptian Mythology. A present from my Mother-in-law to be.
There's also a couple of comic series, but they're over in 20 minutes each episode, so they hardly count.
For me that's a serious downturn on reading matter. That said, I've just ordered a copy of
The Hero with 1000 Faces by Joseph Campbell, so a bit of narrative study is on the cards.

I'm trying to re-activate my software because of "repair" issues and don't know what to put for "request code"

I'm trying to re-activate my software because of "repair" issues. I have had it for 6 years and when I logged in today, it suddenly said that I needed to re-activate within 5 days. It won't allow me to do it online due to an error so it said that I needed to call and activate, but then when I called it said to go online to adobe/go/activate, which I did and have entered my serial number, but it also wants a request code and I don't know what to put there. Please help???

The request code is something that PS generates when you ask it to do the Phone activation, right? Isn't there a choice on PS when you try to activate that is to not do it online and to use a phone call and there is also a button to press to generate a request code. I don't have any way to try this myself, anymore, but I seem to remember something like that happening long ago.

Whenever I try to sync my ipod, it'll say that it's syncing and then "waiting for changes to be applied" when it reaches step 5, then it closes and nothing happens. I don't know what to do :(

Whenever I try to sync my ipod, it'll say that it's syncing and then "waiting for changes to be applied" when it reaches step 5, then it closes and nothing happens. I don't know what to do

Hi, There
What do you mean nothing happends? because after step 5/5 the sync is complete and it should go back to the normal top screen of itunes. Is this what is happning? of is it freezing on step 5?
Message was edited by: Scott\'y

I messed up my links and don't know what I did.

Hello All
On my home page I created all my links by going through the "page properties" to set the color and the no underline thing. I tested it in my browser and they all work out fine, So I realize doing it that was would take to long so when I got to the "About us" page i decided to try and do the CSS thing. When I tested it in my browser, none of my links work (ie, no rollover or color changes). what did i do wrong? My home page links all work, I even tried to apply links to another page (in my site) and they too are not working in my browser.
Thanks
CS3 MAC
Why_atl

Honestly don't know what you mean by "inks don't work."
When you test a page in browser and click on a link what happens? Do you get an error message?
Have all site pages been saved to your local site folder in Dreamweaver? If you don't know what that means, Read this tutorial:
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
If none of those things, Copy & Paste your HTML and CSS code into a reply. Use the Double Blue Arrow icon >> Syntax Highlighting > Plain.
It should look like this
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

HT1222 I CAN'T install the iOS 7.0.2 in my iphone 4. There's an error occured in downloading iOS 7.0.2. What should I do?

I can't install iOS 7.0.2 in my iphone 4. There's an error occured in downloading iOS 7.0.2. What should I do? but my software already iOS 7.tnx

Are you using iTunes to do the update OTA on your iPhone? If its on iTunes and its giving you the error
I reccomend creating a iCloud backup and then downloading the iOS 7.0.2 .ipsw file and installing it manually from your PC. So follow these steps below to do this. (these instructions are for Windows i dont have a Mac so i don't know what you do haha but if you need it i could help and try.
Connect your iPhone to your PC and open iTunes.
If your iPhone uses AT&T or i think T-Moblie download the file here http://appldnld.apple.com/iOS7/091-9871.20130924.7imYu/iPhone3,1_7.0.2_11A501_Re store.ipsw (its large! about 1.2 GB)
If its a 8 GB AT&T iPhone use this link http://appldnld.apple.com/iOS7/091-9821.20130924.jJ61o/iPhone3,2_7.0.2_11A501_Re store.ipsw
If its Sprint or Verizon use this link http://appldnld.apple.com/iOS7/091-9794.20130924.umlNu/iPhone3,3_7.0.2_11A501_Re store.ipsw
Now once it's downloaded go to iTunes while your iPhone 4 is connected and hold SHIFT AND CLICK "Check for update" and then find where you downloaded the .ipsw file and select it.
It should work if there is a problem please reply and tell me the issue. Oh and btw MAKE SURE YOY DO A BACKUP TO iCloud

Don't believe what you read... there's no error.

Similar Messages

Maybe you are looking for