DON'T WASTE YOUR MONEY ON CREATIVE PRODU

i am writing this to let everyone know that creative is taking your money on ALL of there soundcard models with the connector for the front panel audio. they claim ac'97 compliant front audio panels are not supported. there are very limited number of cases on the market today with a hi def front audio panel. i wonder how come my inputs do not work when they should. more to the point, why is it that the onboard sound from all of the mobo's i have ever had work with both ac 97 and hi def, but this sound card will not. where is it shown on the box that this is not compliant with ac97? well i think that this is baad on the part of creative to sell something without making thiws clear on the box, instead they wish to send you an article saying it was incompatible? i am the customer i bought this product to replace my onboard, well if my onboard wroks better and i get my front audio panels then why waste my money on a POS that does not even work as it should? i got an instruction manual in the box like one that comes with an inteld945gtplr motherboard with one exception (intel instruction manual had english instructions, and had more pictured details)? not even in this fold out "instruction manual" did it state that this sound card was incompatible with ac97 connectors. i am going back to onboard and saving myself 00.00?in the process,? and i WILL NOT be buying another creative product because they are obviously not concerned about their customers,?i have seen numerous cases designed for gamers and only like 2 have a high def front panel, and all of the stuff i have found on front audio panels show that you CAN use ac97 compliant on intel hi def according to creative this is not the case at all. well my evga 680i is an intel hi def compatible header and my ac97 works on it. save yourselves some money and do not buy a creative product. don't even waste your money on a more expensi've model with the front dri've bay (why would you want to use 970 and 80's /4 inch heaphone jack which is not the standard)? creative dropped the ball on this one. if you have an extreme gamer sound card and have your front panel audio working by all means share (via e-mail so creative does not get away with knowing how to get it to work right) creative should pay a fee for this information as we spent money on this product and it does not work with most our cases and it is not made clear from the start.

the point is creti've states that the extreme gamer card will NOT work with an ac'97 case. creative needs to do some research on this, if you hook them up correctly it boils down to how to set it up in audio manager and they do not have a clue. i got this working on my own with no tech support. i would like to see evga get into the sound card market, i have their mobo (nvidia 680i reference board) and their video card 640 Mb 8800GTS (hopefully will have a second one soon in sli config). and i have had no issues but at least evga has taken time to help by researching to give the best tech support. creative does not even know that the front panel hi-def plug will in fact work with ac'97 compliant audio header dongles, even intel has a schematic on how to connect ac'97 dongles to hi-def panel connectors.
to creative:? do some research on this issue and learn what your own product is capable of. since according to you ac'97 compliant connectors do not work with this sound card i have no choice but to recommend to my customers not to buy these products and seeing as how all of the x-fi's i have seen with the bay mount panel use a /4" jack i will not recommend them as this is not standard, there is no one here that sells headphones with a /4" jack (except goodwill stores) and most of my customers do not like the use of adapters on their headphones to make it compatible.
i also no longer recommend asus products to my customers for the exact same reason, no tech support, did not know their own products, except asus just wanted to blame another manufacturer. if you at creative do not realise that the extreme gamer is ac'97 compliant (my case is ac'97 and it now my front panel works off of the card) you need to do some more reaserch on your product. build a system with an ac'97 front header dongle, and figure out the correct audio manager setting and let you customers know. there are more users with ac'97 compliant cases than hi def, to date i know of no custom cases except for 2 which are high def front panels, and most of these cases are manufactured 05 to current.

Similar Messages

Misled and disappointed - don't waste your time with this "player"

Frankly, I feel extremely misled by the description of AMP on its product page. Calling it a Media Player and all the talk of being able to watch what you want, when you want and streaming and downloading video - all you can *actually* do is watch stuff from the signed up content providers, or that you've already got on your hard drive (and have presumably got a player for already, that will almost certainly take up a lot less screen estate than this beast). Oh, and there's some mention of adding RSS feeds of videos - though looking at other posts here whether that works is debatable. Anything else might as well not exist.
I had hoped that it would be a way of watching embedded streamed flash videos without having to have the whole webpage that they're on open - this would give you just the video, so would be more compact, and would be resizeable so you could watch it at any size you liked, not just the default or full-screen. After all, coming from Adobe, there would be no problem about having to reverse engineer the RTMP format.
Maybe even (though I thought it unlikely) being able to download videos where the provider permitted it - no worry though, there are other tools for that.
Also - the design. A massive window, not resizeable at all except to minimise / maximise. Appalling contrast - it's like being in a cave, everything's so black. I couldn't even see that there were scroll bars - just waved my mouse around where I thought they should be.
It's like having the worst, most useless part of RealPlayer (the download centre, or whatever they call it) and not the player itself. This is *not* a media player - a client, maybe.
Frankly, the only reason I can see for installing this is if there is some content that it has that you can't get anywhere else. If not, don't waste your time - use something else.
Like I say, I'm disappointed. I feel like I've been lied to and had my time wasted. Unless I'm *really* missing something??
Now we'll see how easily it uninstalls...

"DITTO".
JUST ABOUT EVERYONE IS HAVING THE SAME PROBLEMS WITH ADOBE MEDIA PLAYER (AMP) AND OTHER RELATED PRODUCTS!
INSTALLATION ERRORS!
UNINSTALL ERRORS!
SOMETHING IS SERIOUSLY GONE AMUCK AND GOOFY WITH THIS OUTFIT.
IT IS JUST THE LOUSIEST AND SHABBIEST WAY THE ADOBE MAKES ITS SHAMEFULLY LOW QUALITY (SOFTWARE???) PRODUCTS.
MOST EVERYTHING, ALMOST NEVER WORK RIGHT.
JUST A TERRIBLE WASTE OF EVERYONE'S TIME AND EFFORTS.
ADOBE SEEMS TO HAVE BECOME JUST ANOTHER VENUE PUSHER FOR INTERNET SPAM AD-PUSHERS.
SAD.
VERY SAD.
I AM GOING TO DE-INSTALL EVERY DAMNED ADOBE SHABBY SOFTWARE PRODUCT.
TOO MUCH HASSEL.
TOO MUCH WASTE OF EVERYONE'S TIME AND EFFORTS.
** NOTE **
FIND OTHER RELIABLE SOFTWARE FIRMS THAT HAVE DEVELOPED *.FLV FILE PLAYERS -- FOR THE TIME BEING -- UNTIL ALL *.FLV FILES HAVE BEEN CONVERTED TO *.MWV OR SOMETHING THAT WORKS FLAWLESSLY.
THE *.FLV FILES SHOULD BE BANNED FROM ALL OF THE INTERNET WEBSITES AS UNSTABLE AND SHABBY.
AND SAY GOODBYE TO ALL SHABBY, LOUSY, ROTTEN ADOBE PRODUCTS.
IT IS QUITE EVIDENT THAT LAZY, DEAF, DUMB, BLIND FOLKS (WITH PANTS AROUND THE ANKLES) AT THIS SHABBY OUTFIT ARE NOT GOING TO WORK HARD ENOUGH TO EVER PRODUCE QUALITY PRODUCTS.
SO, SAY GOODBYE TO IT AND ITS SHABBY PRODUCTS AND FIND ALTERNATE RELIABLE, QUALITY SOURCES THAT MEET OUR, THE CUSTOMERS, NEEDS.
IF YOU READ THIS OUTFIT'S GOOFY LICENSING TEXT, IT CLEARLY STATES THAT: ". . . IT DOES NOT WARRANTY THE OPERABILITY, OR MERCHANTABILITY, FOR ANY INTENDED PURPOSES . . .".
MEANING, EVEN THIS OUTFIT ITSELF DOESN'T BELIEVE IN THE QUALITY OR PERFORMANCE OF ITS OWN SHABBY PRODUCTS.
IMAGINE THAT, FOLKS.
WHAT OTHER PROOF ANYONE NEEDS THAT THIS OUTFIT MAKES THINGS THAT YOU THINK WOULD WORK.
WHAT A JOKE.
ACTIONS:
WEB SEARCH FOR:
*.FLV PLAYERS, OTHER THAN ADOBE.
*.FLV FILE CONVERTERS.
WHAT A GOOFUS.
+++++++++++++++++++++
+++++++++++++++++++++
7-ZipeMuleAzureusAres Galaxy
http://www.UberDownloads.com
Batch Convert any File Format
Convert many files at the same time.
You can convert any audio or video file format into any other audio or video format.
Convert many files at the same time.
Quickly Convert to Mobile Device Formats.
Add video clips to your DVD by dropping them onto DVD styler.
Organize and change the order of the video clips too!
Convert files and put them on your iPod, Apple TV, Zune and PSP!
Convert Audio Files to Other Formats with:
Convert any video or audio file to another format.
Convert files for iPod, Zune, PSP, & Apple TV!
Free Open-Source Version,
Free Unlimited Use and Updates!
Clicking this Download button starts InstallIQ, it will manage your installation.
Learn More.
What is MediaCoder?
MediaCoder is a FREE universal batch media transcoder!
This means MediaCoder can convert any audio or video file format into any other video or audio file format.
You can use MediaCoder to convert your .AVI files to .MPG files.
You can convert your .WMA files to .MP3 files.
Why would anyone ever need this?
Well certain audio and video players may only play certain formats.
Let's say you have a great movie you want to watch on your iPod while at the gym.
But your video is in .WMV format, and your iPOD doesn't play this type of movie!
Well you can use MediaCoder to convert your .WMV file to a MPEG-4 file, then just sync to your ipod.
You can do this for your iPod, Zune, PSP and Apple TV; all through a simple interface.
Supported Formats:
MP3, Vorbis, AAC, AAC+, AAC+v2, MusePack, Speex, AMR, WMA, RealAudio, mp3PRO*,
FLAC, WavPack, Monkey's Audio, OptimFrog, AAC Lossless, TTA, WAV/PCM, Waveform,
H.264, XviD, DivX, MPEG 1/2/4, Theora, Flash Video, Dirac, 3ivx*, RealVideo*, Windows Media Video (*.WMV), AVI,
MPEG/VOB, Matroska, MP4, PMP, RealMedia*, ASF, Quicktime*, OGM*, CD, DVD, VCD, SVCD, CUESheet*, HTTP*, FTP*, RTSP*, UDP*
Requirements
Windows 98/Me/NT/2000/XP/2003 Server/Vista
About MediaCoder
MediaCoder is open source software and is made freely availble for personal use.
Source code and license information for DVD styler can be found here:
MediaCoder Project Page
http://www.UberDownloads.com
© 2008. All Rights Reserved.

If my peak "physical memory" usage is around 50%, is adding more RAM a waste of money?

I have a W700-DS with the T9600 dual-core and an SSD, and when running 4GB of RAM I'd notice that memory usage tended to rarely exceed 50%. Just for the heck of it, I just upgraded to 8GB of RAM, and now I'm curious as to whether I wasted my money, as the 4GB usage never hit 100%. One thing I did notice is that my "Windows Experience Index" went from 5.9 to 6.4, but I'm guessing maybe that's just marketing BS from Microsoft.
Thanks for your opinions.

If you haven't checked it out already, take a look at what the Resource Monitor tells you. I'm "using" only abpit 3GB out of 12 right now, but 9GB is marked "standby" -- memory filled by SuperFetch with items I'm most likely to need. The memory is still availalbe for something else if Windows/SuperFetch guessed wrong, but if it guessed right, it's already there and ready to go. Thus the boost to your Experience Index isn't total BS. You may actually be find your system more responsive. For example, if you always start your morning reading email, then check a website, then finally open your primary work applications, having more RAM allows SuperFetch to predictively load more of this while you're doing something else.
Interstingly, as I was typing this, my In Use dropped to 2.7G, Standby has filled the remainign 9.3G and free is down to 0 (Hardware Reserved is a negligible 113MB).
You don't mention exactly what OS you're using, but I'm going to presume Windows 7 x64... with a 32-bit OS, you definitely would have been wasting your money with its nominal 3GB limit. SuperFetch wasn't quite as good with Vista, but there would still be some benefit there, I think. I have no experience with XP x64.

MyFi?? You need a special card for Verizon "3G" - Don't waste time, get ATT

I spent time in line and got a Verizon 3G Ipad2 today. I was told at the store, "plug it into a computer with Itunes and select your plan..." My Ipad2 wont do that, I don't have a Wifi signal. So, after 5 hours on the phone with both Apple and Verizon (Neither would just give a straight answer, "This is what's going on...") a Customer Service Rep at Verizon tells me about "MyFi", a special little card that allows the Ipad2l to work with Verizon. No one told me anything about this, neither at the Apple Store or at the Verizon Corporate Store I bought this at (Verizon Cor. Store told me, "It's a new product...it's going to have glitches", meaning even the people at Verizon don't know what "Myfi" is...!!)
Bottom line-
The Ipad2 will not work with '3G' unless I have this little "myfi" card. AT&T Ipad2s have it pre-installed()...
So, I am supposed to keep track of this little 'connector card' to stay connected???
"It's really small...", the Verizon rep says...
Kind of defeats the purpose of the Ipad2 to have to carry a little card on my person....what if I lose it?
Don't waste your time, like I did (5 hours on the phone!!!! Was told to go back to the Verizon store, which was just closing, told, "Sorry, come back tomorrow at 9AM..." after spending a $1K)
just get the AT&T Ipad2!

he said specifically that the Verizon model does NOT have a Mifi internally
Correct. It does not. It has a 3G chip inside that allow it to connect to the Verizon CDMA cell network.
only the At&T model does have it in it
The ATT version does not have mifi in it either. It is not needed because it has a 3G chip inside that allow it to connect to the ATT GSM cell network. The ATT iPad also requires an ATT microsim card,network gives it the identification to use the ATT network. Verizon does not require a microsim.
that is why you need Mifi to run Verizon with an Ipad2...
You do not need mifi to use a Verizon 3GiPad 2. It has a 3G chip inside, the same as a cell phone.
Mifi is a small, completely separate device about the size of a pack of cigarettes. It connects to a cell network and creates a "wifi hotspot" which allows wifi only devices (Verizon iPad 2 is not wifi only) to connect to the Internet when there is no wifi around.
The 1st gen iPad could not connect to the Verizon network, so Verizon sold the wifi only version with a mifi device. This is not needed with a Verizon iPad 2.

Did I waste my money?

ok so i bought the Isight a few months back and have yet to use it. I am an AOL user so I have a aol account. I want to go on line and meet people and have video chats with the people I meet. is this possible and how? are there certain groups or chats that are exlcusive to isight members? can i only do this by meeting other Ichat users with i sights? I have almost given up on this thing. it is my least favorite apple purchase. please advise.

Tony,
I want to help you get your money's worth with regards to your recent iSight web cam purchase. No you did not waste your money. In time it will be one of the most valuable tools on your computer. But you do have to configure it properly for it to work.
Please provide a few more details:
1. Confirm your current OS. Is it X.4? If it is, you may want to consider updating to the most current OS.
2. Have you set up an AIM account? If not, then you need to do this. (see Ralph Johns' posts on how to do this or refer to the readme, or ichat help menu).
3. What happens when you start up the computer, and then plug in the camera after it is booted up? Does ichatav launch by itself (yes/no)? If not then set your pref's up accordingly under ichat "video".
4. Also set your video pref's in ichat to "none".
5. How are you connected to the internet? Is it via airport or ethernet? Airport works ok but it can be slightly more problematic than a direct ethernet connection.
iChat AV mandates a high speed connection. For example I use cox cable HS (coaxial) at about 4 mb/sec.
6. Also check Ralph Johns' site for a list of places where you can test you web cam. He mentions all of them. But if you still can't find then, then feel free to test with me via AIM: SDMacuser1
7. Depending on how your system is connected to the internet, it may be necessary to address certain port settings if you are unable access ichatav. For example, i use a toshiba pcx2500 cox cable modem. That in turn is connected to a Belkin Gateway 4 port roughter (which mandates i address certain ports for ichatav to work properly... like port 5060) You may have to do likewise in a similar situation. It just depends on your own setup.
Give us as many details as possible on how your system connects to the internet so we can further troubleshoot with you.
It all sounds complicated but with a few simple steps, in time your system will be up and working as expected.
Good Luck

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
To help avoid future transgressions set the Restrictions for In-App Purchases...
Settings > General > Restrictions
Understanding Restrictions > http://support.apple.com/kb/HT4213

HT1657 If you don't watch a rented movie do you get your money back

If you don't watch a rented movie do you get your money back

No, no more than you would get your money back from Blockbuster if you rent a DVD from them but don't watch it.
Regards.

Support for Third Party Apps when they take your money and don't respond

Does Blackberry App do anything about third party apps that take your money and then don't give you what you paid for or respond? I paid $4.99 for Jeweled game from getempower, it downloaded and worked a bit, then it said I needed to Register. When I clicked Register, nothing happened, it just said "checking registriation" forever. I clicked on the Support Email provided and it returned an error saying "We get too much spam so you can't email us anymore, so please go to our website for support." So I went to the website www.getempower.com, and got to the Support form and filled it out, and it said "you cannot submit form until you choose the app" but when I tried to choose the app it wouldn't let me. I can't see anywhere else on the web page to contact them. So I paid for the game but it won't let me get to it. I looked at the reviews and it looks like several other people have had this same problem. I guess I thought buying something through App World would be trustworthy - App World, do you stand behind the vendors you allow to sell on your site?

Hi and Welcome to the Community!
Firstly, as a user-to-user community, no one here can answer your question with any level of authority whatsoever. This site is not a channel for any formal communications with RIM. All support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into RIM at no charge to the end user...and that is the required path for formal support for issues such as yours (including requests for refund, if you choose to go that route). So, your escalation path is not here, in these forums.
But, have you tried removing and resinstalling the app? And/or clearing the AppWorld cache?
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT4311 Hi, I am trying to use my phone in Japan. It is a PAYG phone purchased directly from the Apple web store currently with Vodafone. Have tried to purchase a sim in Japan but can not do. Help please! I feel as if I have wasted my money! Bought 5 iPads

Hi again,
I have purchased 5 iPads and 1 iPhone 4S in the UK thinking if I invest in an Apple top of the range I am covered worldwide for usage. Apparently not!
Got the phone as a PAYG and use with vodaphone, but got it direct from Apple.
Any help to buy a microchip from Japan would be much appreciated.
I feel as if I have wasted my money.
David

Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add.

IPod 1st generation....did I waste my money?

I just purchased an iPad 1st generation and can't install very many,if any apps from the app store because of the iOS not being 6 or 7. There doesn't seem to be a way to upgrade the iOS. Any helpful advice or did I just waste my money?

The first gen iPad only supports up to iOS 5.1.1 - is that what you have (Settings > General > About > Version) ?
Some developers allow you to download previous compatible versions of their apps. If it's a free app then try downloading the current version of it on your computer's iTunes so that the app is in your account's purchase history, and then on your iPad see if you can download a previous compatible version via the Purchased tab in the App Store app. If it's a paid-for app then try contacting the app's developer first (there should be a link to their website on the app's description page in the store) and see if that will work for their app - don't just buy it just in case they don't support it.

HT204053 I have 2 Itunes accounts, one I don't use with money in the account, can I combine that money or account into the account I currently use?

I have 2 Itunes accounts, one I don't use with money in the account, can I combine that money or account into the account I currently use?

You can access, usually under the Apple (icon) menu in the main desktop
window, note item with name "About this Mac" & click on that, to see more
information about your computer, its OS X version, and other. The system
version and build model are there. Do not post a serial number.
If you are setting up Mail in a Mavericks OS X 10.9.x system, there often
is access to information in the Help viewer from the main menu bar, or
in an open mail application. If you have a Gmail or other account, that
info is often on their home page where setup and help are located.
The settings of each email account may vary according to their provider;
so you would have to change your computer to accept them. An older
link to a general look at that issue, change IMAP to POP, is covered here:
https://discussions.apple.com/message/16770816#16770816
While that may not answer your question, you could use the info in
your Mac OS X system Help viewer and use its search; or maybe
a Spotlight search to see an answer online.
You have to learn some basic things in order to actually use these...
and it helps to expand that so you won't have to pay for tech service
on things you can do yourself in a few minutes, beyond easy stuff.
Of course, you're hearing this from a guy with no ISP email, ever.
So mine are web-mail only; & I never save email to a computer.
PS: If you have a new Mac with an AppleCare plan, you may be able
contact Support for help. Ask someone (for 90 days, or up to 3 years
if the Plan was extended) there at AppleCare, for their guidance.
http://www.apple.com/support/contact/
Good luck & happy computing!
edited

Is it possible to easily run Microsoft office 2010 with access on a MacBook pro or have I wasted my money ?

Okay , first off thanks for any help in advance . I just purchased a MacBook pro for my daughter for college . ( finance major ) . Her class requires Microsoft office 2010 with access . As you probably already know , and I have just learned , that is no offered for Mac. Is there an easy way To run ms office with access on a MacBook pro or have I wasted my money ?

All that matters is file compatibility. The documents look the same. I've been a professor, so I don't see any issues here at all.
Another option you may want to consider is this: Run Windows on the Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I had just got my ipod back the newest generation and i disabled it because i haven't had it in awhile. I also do not have the primary computer i synced it on so now i cant get on at all. I don't have much money to go to the professionals. What to do?

I just got my iPod back it about a week ago. It's been about 5 months? I don't have the computer I first synced it on due to the fact the whole thing just broke on me. So I can't restore it that way. On top of that I don't remember any type of passcode/word I had it's just been awhile. I don't have much money to go to Apple if they do charge me to reset it...really I don't have money at all to pay for anything like that. Is there any other way I could reset the whole iPod and start over? Can anyone help me?

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I put my card num in here so I could buy sum things wen I didn't have the money but I don't have any money on my card so I went n bought a $25 card n now it won't work cyz I can't get my 1 card num off here it won't let me.. How do I get that card num of.

I put my card num in here so I could buy sum things wen I didn't have the money but I don't have any money on my card so I went n bought a $25 card n now it won't work cyz I can't get my 1 card num off here it won't let me.. How do I get that card num off!!

i the top right corner of the iTunes store click on your account, log in and go to billing info. Hope this helps

Texas Hold'em bug : last 2 tables crash and take your money

I just encountered a pretty nasty bug with with the Hold'em game. After accumulating around 300k I went to try my luck at the 50k table. The game took me back to the menu of the Hold'em game. I tried again, same thing. I decided to try the last table instead and it once again took me to the menu. The kicker though is that the game took my money before booting me back to the menu.
I lost all my winnings. Pretty annoying. If anything it would be nice if the game could validate that the table loaded properly before taking your money for it.
Some details:
- I was playing my own music with headphones on, in other words, the game sounds were not active. (It might have reached the end of the playlist at the time though, I don't remember)
- It was my first time trying to play those two tables.
- It was not the first table I played in the session. I played a couple of tournaments on the Vegas table first.
- I tried all other tables at some point and none ever did this. Only the last two.
Message was edited by: AmpleMousse
Message was edited by: AmpleMousse

There is a way to get you rmoney back that may also work for your situation.
If you are unhappy loosing, when you return to the statistics screen hold down the home button until the application unloads. None of the statistics are saved and when you restart you have all your money back.

DON'T WASTE YOUR MONEY ON CREATIVE PRODU

Similar Messages

Maybe you are looking for