DOTNET SMTP EMail Configuration

Team,
I am trying to use the Groupwise email, in my Asp.net web application.
And use below configuration to create an smtp client ( this SMTP class is from dot net framework).
SmtpClient objMail = new SmtpClient("gwmail.occc.state.tx.us");
objMail.Port = int.Parse("25");
objMail.UseDefaultCredentials = false;
objMail.EnableSsl = true;
objMail.DeliveryMethod = SmtpDeliveryMethod.Network;
objMail.Credentials = new System.Net.NetworkCredential("MyWebclientUserName" , "MyWebclientPassword");
I am unable to send email using this configuration. Do i need to add additional parameters ? or Do I need to use any NovellGroupWise Libraries??
(Same configuration work for Gmail account, with respective gmail settings).
Please let us know.
Regards,
Chandra

* Log in to the Planning Application as the Planning owner.
* Give a valid email address under File>Preferences.
* Check the email server settings under Administration>Application Settings> Advanced Settings.
* Log in to the Planning Application as the Planning user.
* Give a valid email address under File>Preferences.
Both the Planning application owner and the User who is supposed to receive the mail should have the e-mail address filled up in Preferences.
HTH-
Jasmine.

Similar Messages

Testing email configuration

Hi experts,
Im trying to test my email configuration under maintenance menu in cfg connectivity option, but when i clic en test email button and after that i give sender and receiver email gives me a error message:
XCE078 The deployed IPO-Step instance currently is deactivated: /vPlatformIDE/com.sap.b1i.vplatform.ide/ipo/vPlatform.ide.ipo/TestEmailConfig
Recommendation
Check for the correctness of your activity or environment or ask your system-administrator for further help.
If you could help me about this ill appreciate

Hi Fernando,
This is a late reply to your post, but it is for the benefit of anyone reading this thread.
The documentation currently around the SMTP setup & troubleshooting is very poor.
You can resolve this error by going to 'Monitoring' then 'Process Control' and clicking the button 'Clear INCOMMIT Transactions'. It will say something like "1 INCOMMIT Transactions set to final state" and you will be able to keep emailing test emails thereafter.
Note: If you scroll to the bottom of the page mentioned above you will see 'TestEmailConfig' under the heading 'Framework Processes'. The button 'IPO Log' can give you additional details of the transaction.
Good luck!
Kind Regards,
George Mamacos

Email configuration for Samsung Bada 1.2

Hi, Do beehive support Bada 1.2, can anyone share the email configuration settings.

The answer is NO. Oracle Beehive only provides support for BlackBerry, iPhone and Android. Not even Windows phones :(
But yes you can configure Beehive email on any phone. You can see the settings here:
The information contained on this page will guide you to configure your Mobile Device device for use with Beehive Email.
Other mobile phones may be used, but will not be guaranteed to be compatible with Beehive.
Configuration Steps
Assuming your Mobile Device has an IMAP/SMTP Client, you may use the information below to get emails.
IMAP Configuration:
Server = stbeehive.oracle.com, port = 993, use SSL/TLS
Username = Beehive SSO username, eg. [email protected]
Password = Beehive SSO password
SMTP Configuration:
Server = stbeehive.oracle.com, port = 465, use SSL
Username = Beehive SSO username, eg. [email protected]
Password = Beehive SSO password
This works on my Nokia Phone and should work on your Samsung Bada as well!

Email Configuration Tool - Can not connect

Hi
I can't get the 'Nokia Email Configuration Tool' to connect to my phone.
I have a N70 phone. I am using a Nokia CA-53 USB cable.
The PC Suite version is 6.70.22
The Config. tool is version 1.0
The phone is connected to PC Suite and shows as such in my system tray and in PC Suite. Other functions seem to work ok, e.g. I can synchronize contacts etc..
I fill in the details in the Config. tool but get the message 'Phone isn't connected'.
My OS is MS Windows Professional Version 2002 SP2
My operator is T-Mobile.
Additionally, I previously tried to get settings sent to my phone using the 'send settings service'. However my email provider, UK2.NET, does not appear.
Thanks for your help
Chris

Thanks for replying quickly. The link is:
http://www.nokia.co.uk/nokia/0,,75924,00.html
but I see now the tool is not specified for the N70 phone.
However I resorted to this tool as I can not send email. I can receive email ok.
My operator is T-mobile
my email supplier is uk2.net
I use smtp authentication
email it is POP3
smtp should use port 443
I notice that there is a security port configuration option but it is present and does not offer port 443.
Please can you advise how I can specify my own settings.
Thanks
Chris

SMTP Email Error 54

Hi all,
Why does SMTP Email vi does NOT work? I searched the forums but could not find the answer. I am using LabVIEW 11 development suite on Windows 7.
Here is what I tried:
1. I put in the IP address of our SMTP server obtained from our IT department - didn't work (btw, the format for this IP address is xx.x.xx.xx
2. I put in stmp.mycompany.com (where obviously mycompany is the name of my company - again this info was provided by our IT department) - didn't work
3. I put in my personal gmail address, and smtp.gmail.com - didn't work
In each case I get Error 54. Why is this happening? Are there certain LabVIEW settings that I am not setting correctly? The error message says to check if I have DSN properly configured.
Does this mean that I need to setup something in Win7 that allows LabVIEW to communicate with the outside world (ie, send an email)?

I suggest to forget about your company environment for now. There is a more iminent problem which is that you can not even able to send emails via a known good service. So I would concentrate on resolving the problem with gmail, it may resolve your problem with your company server immediately.
The IP address as we see it is a decimal representation of four hexadecimal numbers. It doesnt matter if you write "1" instead of "001", its still gonna be 0x01, so dont worry about that. You can use the trailing zeros if that makes you more comfortable.
Firewalls also can block suspiciuos programs running on your computer. You must check, maybe LabVIEW is blocked at this moment. Google it, or just click to the link, I did it for you. (http://goo.gl/zExBL7)
BTW: http://digital.ni.com/public.nsf/allkb/4AB126AEEE00008386256B1B004A2FB8
Attach your VI let me check it (the VI you want to use for gmail, so the LV2011 example). I have LV 2013, I believe the example is changed for this version.)

SMTP Email Destination Default Settings Valid

Can some one help me how to set the SMTP Email Destination Default Settings Valid status in metrics tab of DesktopJob Server from false to true?

In the CMC:
1. Go to Servers.
2. Right-click on the Destination Job Server and select Properties.
3. Select "Destination".
4. Make sure that "Email" is one of the configured destinations. If it's not, you'll need to add it. If it is, you need to make sure it's configured correctly.
5. Right-click on the Crystal Job Server and select Properties.
6. Select 'Destination".
7. Make sure that "Email" is one of the configured destinations. If it's not, you'll need to add it. If it is, you need to make sure it's configured correctly.
Now you can reschedule your report.
have a look into below link. This may also help you out.
http://www.forumtopics.com/busobj/viewtopic.php?t=166577&start=0&postdays=0&postorder=asc&sid=9c78ea57cbde41c740bdd27054a42ce9
it is necessary to enable the targer email in the following Servers
- AdaptiveJobServer
- DestinationJobServer
- PublicationJobServer

SMTP Email Implementation..?

Hi All,
i tried to impement SMTP Email in ATG using smtp.gmail.com but getting following exception.. giving valid username and password
DEBUG SMTP: useEhlo true, useAuth false
DEBUG SMTP: trying to connect to host "202.63.96.1", port 125, isSSL false
Thanks,
VishnuVardhan

Make sure you have correctly configured SMTPEmail component to use with Gmail SMTP server, details of which are mentioned here:
http://support.google.com/mail/answer/13287?hl=en
Also try disabling 2-step verification in Gmail if you have enabled that. You may also want to refer this thread for enabling SSL or TLS:
Re: unable to trigger email - STARTTLS error

SMTP Email ..Sent items no there in Sentitems Folder

i m using SMTP email setting on my application...
If i use a gmail account , whenever i sent an email from my application i can see it in my sent folder in GMAIL.
But, if i use my corporate account email is sending...but i could not able to find the copy of sent email in SENT ITEMS folder...
How to resolve this, expert advise is required.. please
Hai

What i did is.... i used my
company account ([email protected]) in .NET Application to send emails..
Thanks for the update. I thought you are using Outlook as your mail client in my first reply. From the quoted sentence, you are using a .NET application as your mail client rather than Microsoft Outlook. If this is the case, you may need to contact the designer
of the application for further assistance because this forum focuses on general questions and feedback related to Office 2010, and we are not familiar with the .NET application you are using.
Thank you for your understanding.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Executable build failing with no error message with smtp email VIs

I have a VI which I want to build into a .exe which will be used as an HMI for a real-time system. I am using the SMTP VIs to text/email me various notifications about the system state. The main VI works fine if run but will not build into an .exe. The error message comes back blank so no help there (LabView 2010). If I just simply disable the portion of the code in the HMI.VI which contains the email VI code, the application builds. I searched for anwers and was unable to resolve the problem. Any ideas? Do I need to include anything in the build that is specific to the LabView SMTP VIs? I'm new to building .exe's so I appologize for any rookie mistakes I may have made.
Thanks.

mikeporter wrote:
You said you searched for answers (on the forum?).
Yes.
What did you find?
I found a bunch of topics on email send errors after the application was built but nothing related to .exe building failures (related to the SMTP/email VIs). I also found topics dicussing the bug that fails to report an (any) error during the .exe build (for 2011). The solution was to install the service pack. if that's my problem then I will have to go through the motions to get that done (corporate computers / lack of persmissons and such).
What have you tried? This question has been answered many, many, many times.
I tried what I stated in the OP. If I disable the portion of the code which contains the email SMTP VIs, the application builds, otherwise, the build fails and no error code or description is given.
PS: probably has nothing to do with the SMTP drivers, per se.
If the answer has been given many, many times, then I appologize for not being able to find it before posting. Trust me, the last thing I want to is waste my time fishing for answers on the forum, especially when I get a response from forum members who would rather point out that my mis-identified problem has been answered many, many times, rather then just helping me out.

I am losing my carriage returns when sending emails. How to keep? uses SMTP Email MIME Text Content-Type.vi

I am losing my carriage returns when sending emails using the Internet email vi's.
All carriage returns are stripped out and I get one long word wrapped paragraph.
I want to avoid html.
Ideally, using the vi's for rich text would be perfect, but a simple text message with carriage returns and line feeds in any font ok.
uses SMTP Email MIME Text Content-Type.vi
i have tried text/plain, text/html, and mixed yada something

You need to use Line feed constant and then use concatenate function.See the screen shot.
Naqqash
Attachments:
Using Line feed.png ‏15 KB

Exchange 2013 mail contact in Active Directory missing SMTP email address but has a primary email address

Outlook 2010 Distribution Group contact member "Al" is not showing an email address. In Active Directory "Al" is showing an email address but it's not a SMTP email address that is created when you add a new Mail contact using EAC.
When the DG owner sends out an email using DG email account, the mail bounces back as undeliverable.
Exchange Admin Center is not showing the member. The only way to fix the member is by deleting the contact. Re-add contact in EAC then add to Distribution Group. We have over 30 DGs that are missing the SMTP email addresses.
Can a Powershell command fix this issue or is there a sync issue between AD and Exchange?

Hi,
From your description, the contact you specified should be contact not mail contact. Contact and mail contact are two different things. If you create a contact in ADUC, you need to mail-enable it and then set the primary SMTP address for it.
For more information, here is an article for your reference.
Recipients
http://technet.microsoft.com/en-us/library/bb201680(v=exchg.150).aspx
Hope my clarification can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Error 1172 occurred when sending smtp email via labview

I found these two useful vi example to send smtp email using Labview:
http://decibel.ni.com/content/docs/DOC-7451
http://decibel.ni.com/content/docs/DOC-2401
However, I got error 1172 saying "No connection could be made because the target machine actively refused it 74.125.91.109:587". I'm using gmail to send emails and pretty sure that all the settings in the VI are correct. According to http://mail.google.com/support/bin/answer.py?answer=13287, I tried both 587 and 465 as the port, and nothing would help. 587 will give the 1172 error and 465 will hang the vi for a while after stopping it. This 1172 error is unlikely due to the suggestion from the 2nd link, "Note: If you receive Error -1172 with this example, try logging into the Gmail account with your browser. This error can occur with Gmail accounts that have been inactive for a period of time. You must log in with a browser and verify CAPTCHA text to reactivate the account." because the error kept on even when I login to my gmail account.
I got myself a solution from http://stackoverflow.com/questions/2737823/unable-to-send-smtp-mail-with-net-network-issue, which says to turn off the antivirus software. I turned off McAfee on my PC and it did work. Now, I'm able to send email, even when I log out my account. However, I'm not happy since I have to keep my antivirus off. My question is, is there any way to walk around this issue? i.e. being able to send email with antivirus on?
My 2nd question: how to send message to multiple recipients? The string array to the "recipient" does not work, and the form of "[email protected];[email protected]" does not work neither. Do I have to create multiple property nodes for the recipients or better way to do it?
Many thanks
Message Edited by holyna on 06-14-2010 11:34 PM

Hi Bhuvanesh,
I noticed that the original thread here hasn't been updated in over a year. In the future, it will be helpful if you begin a new topic for your issue.
I will first address your second question concerning sending SMS messages using LabVIEW. The only way LabVIEW can send an SMS text message is by passing an e-mail to the appropriate SMS gateway service. This gateway will vary by cellular provider. You will need to obtain the SMS gateway service information for each carrier you wish to push text messages to.
As far as the error you are receiving, we will need more information in order to narrow down your problem. What is the exact error message you're receiving? Are you receiving "1172: No connection..." or some other variation? A screen capture of your code would also be very useful.
Regards,
Andy C.
Applications Engineering
National Instruments

Can we provide UN and pwd Authentication 4r SMTP Mail Configuration

Dear All,
Previously we are able to send the mails from SAP to Outside World. After chaning the Mail Server to MS Exchange 2003
We enabled the Port the 25.
We are facing a problem While configuring a mail via SMTP for Exchange Server 2003.
Throws an Error Message:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 > : Recipient add
As per network Team :
Unless we provide a Username and password, the Send/Receive process does not happen.
Is there any option in SAP - SMTP Mail Configuration to Provide user and password Authentication.
I searched in SDN as well as in market place. but i could not succeed. Please guide me the process.
Regards
SNB.

Hi we are configuring Google SMTP getting below error..
No delivery to xxx.com, authentication required
Message no. XS856
Diagnosis
The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
Information from external system (if available)
smtp.gmail.com:587
530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
Procedure
Enter the logon data in the SAPconnect node.
Using Gmail SMTP server using "smtp.gmail.com" with port 587
Please advise.
Regards,
Sudarshan

CRM Email Router & Email Configuration

Hi All,
I have some question related email router & email configuration in MS CRM 2015. I test using gmail account for both CRM email and contact email (different gmail account).
1. I try send from my gmail to CRM directly, the result is the email not received in CRM. but if I try from CRM to my gmail using email activities first, after email received in my gmail inbox and reply back the email, I have received new email activities
in CRM. my question is why the email not received if I try to send directly?
2. what is email server profile use for? is there any article/link is easy to understand?
thanks.

hi Erro,
why I asked is to check if email router machine account is added into the priv user group.
http://msdn.microsoft.com/en-us/library/hh550195(v=crm.6).aspx
regards
Jithesh

EWA Email Configuration

Dear all,
I need your help in sending the EWA Report automatically.
I have added the Email recipient in T-code DSWP under my solution.
Also I have configured in T-code SCOT.
For test purpose I manually generated a EWA Report and after the background job SM :EXEC SERVICES, I checked the status of the mail in T-code SCOT,the mail is in waiting state for a long time but when I click on "Start Send proc for Selection", the mail is getting delivered.
Now what should be done to make it automatic?
Thanks,
Regards,
Hasan
NOTE : i referred this thread too.
EarlyWatch Individual Email Configuration - configure email transmission

Dear all,
The Issue is solved now.
I can able to send email to the corresponding recipient automatically.
I had problem with two things which created this issue.
Firstly i re-scheduled the SAPCONNECT job in T-code SCOT and then I scheduled the background job SM : EXEC SERVICES correctly, which turned the bottle icon into a report icon after few minutes. N later the Email was sent.
Thank You for all your support
Regards,
Hasan

DOTNET SMTP EMail Configuration

Similar Messages

Maybe you are looking for