DOWN PAYMENT FOR CUSTOMERS
Hi
Can anyone send me a write up on the standard down payment creation, reciept and clearing the same against customer invoice in SAP?
My email id is [email protected]
Regards
Sanil Bhandari
1 - Down Payment Request for Customers Use TC: F-37
Here you create Noted Item this line item you can use wile creating Down Payment
2 - Down Payment Use TC:F-29
3 - Transfor SP Gl to Normal by Clearing of SP GL Use TC: F-39
4 - By clearing of Normal Gl : F-32
5 - Incoming Payment Use TC: F-28
These are the Process for Down Payment for Customers,
i hope you this is use ful for you,
Thanks,
TML
Similar Messages
-
Hi,
I have one purchase order which has an asset under construction. i want to make down payment for a vendor for this particular purchase order. But when i go for F-47 and enter spl. gl : A and give reference of Purchase order it gives me an error that down payment not possible for this class of assets.
I also tried for for spl GL B and M. but not working. Pls help.
sonali.Dear Sonali,
Please check if you have maintained GL account assignment for Down Payments clearing account in AO90.
Assign points, if useful. -
Problem of Down Payment for the Asset under Construction
Hi All:
My problem is, after do down payment for the AuC, we got an additional amount under the values booked of AuC, double checked the accounting document, found that system generated two items when doing actual settlement with t-code CJ88, for example, when display asset value, system lists the value as follows:
Net book value: 194,325 (Normally only has this value under the AuC)
Down payment: 93,950
I don't know why? And how to balance the asset values? Please give me some hint, thanks in advance.
Thanks
Kai
Edited by: Kai Jiang on Jan 14, 2009 6:52 AMHi,
I think the system behavior is right ! When posting the final invoice and clearing the down payment the additional items (Down payment: 93,950) were cleared. Go ahead!
Good luck
Tao -
Payment Wizard :outgoing payments for customers
Hi,
it would be very nice if the payment wizard could handle outgoing payments for customers.
I can pay a credit memo for customers manually but not by payment wizard.
For example:
1 invoice +1000u20AC
1 credit note -1500u20AC
total = -500u20AC
--> payment wizard should create outgoing payment about 500u20AC.
best regards
MarkusThis Requirement is very important. I can't understand that the payment wizard can't handle this case.
-
MIRO Down Payment for PUrchase order ********* Exist
Dear all,
I have made PO with three line items in that third line item i have done the down payment.
i have made GRN and done Invoice for all the three line items.
My question user is again doing the miro for the same particular po. Now system throwing a error message saying that
Down Payment for PUrchase order ********* Exist M8138.
But my user id i was trying to do the same its not showing anything.
What could be the reason and SPRO Invoice verification--sytem attribute message i was checking there. It was not maintained this error message How system will bring this message in MIRO.
Could you pls clarify my doubt.Thanks Kunal.
If duplicate entry exist also why its showing for only one User. Becos my user id its not showing that error message.
Then above message i have told that i havnt maintained any message M8. But where its picking this error message -
Down payment for Normal Assets
Dear Experts,
I have an issue on Down payment for Fixed Asset.
User created an Fixed Asset (Normal Asset) which is not a AUC Asset.Created a P.O and Assigned that Asset into the P.O. Now he want to post the downpayment request for the same through F-47. Now they are getting the below error.
You cannot use this transaction type to post to this asset
Message no. AA 834
Diagnosis
The transaction type entered belomgs to transaction type group 15. It has been specified for this transaction type group, that it is only allowed to post to asset classes for which it has been explicitly allowed (for example, the asset class for assets under construction). The asset to which you are posting belongs to class 46 (chart of depreciation XXX). You cannot post to this asset class using the transaction type entered.
Procedure
Check the asset number you entered. You may want to allow posting to this asset class using this transaction type group.
here i have the below doubts.
1. Can we assign the other than AUC Asset Class in OAYB for down payment (Group 15). but the system is showing the AUC Asset Classes only.
2. Can we assign GL Accounts for Down payment and down payment clearing accounts in AO85 other than AUC Asset Classes also? becasue if i check F1 help for those fields its saying only for AUC Asset Classes.
Kindly help me for how to do the down payment for Normal Assets.
regards,
Gopi.PHi,
I have a simple solution for you, which treats your down payments made to asset POs also same manner as down payments to normal POs.
Please check the below thread.
[Asset Downpayment;
Regards,
Srinu -
Workflow for approval of down payment for outward freight
Can somebody suggest if is there any standard workflow available or not for approval of down payment for outward freight in SAP system? I want to build a workflow for this purpose upto two level of approval.
Thanks & Regards,
ManasHi Manas,
There is business object BSEG for down payment request. Try to use that and u can find workflow as Arghadip said in other thread. In PFTC u can go for F4 and search. -
Depreciation is calculated on Down payment for asset
Dear friends,
While i am making down payment for Asset to the vendor through transaction code F-48, the depreciation is calculated on the advance amount what i posted.
Please advice me ???
Regards
MrutyunjayaDear Bernhard,
This setting is for new document. what about my old document which has already been given advance to the vendor and depreciation is calculated.
Ex- I have given Advance to the vendor for Asset on 22.01.2009 of Rs 165000 and depreciation rate is 4.75%, and on 16.02.2009 i receive the Asset from the vendor and invoice cleared against advance. System is showing bellow value.
Date Amount Dep Value
22.01.2009 Rs. 165000 Rs. 1959-
16.02.2009 Rs. 165000 Rs. 1959
Please advice me how to make rectification of depreciation amount on that asset.
Regards
Mrutyunjaya -
How to create down payment for contract
Hi Gurus,
Can any one tell me the process of Initial Down Payment
for Value Contract?Hi Marcin,
As far I know, the functionality of entering down payment in header will not allow you to post the DPR at header level, it has been given an option to enter the DPR as against at line item level available before.
Looking from a logical point of view, if a PO has more than one line item then then how to determine against which item the DPR has been entered, there may be line items with different delivery dates say one line item requires a down payment to be made, and the other doesn't and also it may come in much before than the item against which the DPR has been made, then it will be a mess for Finance to decide whether to pay for this item or balance the invoice against DPR.
Regards
Chandra Shekhar -
Down payment for asset plant and machinery
Dear Experts,
Can any body help me, i have one issue user posted one asset po , in po asset is assigned, now they are posting to that po some advance through f-48, my asset class is plant and machinery, with No AUC option , this advance amount is posting to asset also and caluting deprection, it should not post to asset and calculate depreciation.
regards
chanduDear AP,
thanks for your reply, my p.o account assignment is asset "A". i need to track the down payament in P.O history.
In t.code F-48 second screen p.o reference we are giving automatically what we asset no. assing in p.o that is displaying. If i revome also again it is coming and posting to asset and caluclting depreciation. please suggest without post asset how to do the down payment for asset p.o.
please suggest
Regards
Chandu. -
Down payment for Serivice Call!
Hi all!
I have a problem a bout services call. This is senarior of my customer.
Before create Service Call, they have Down payment for service (not for Item) and then they create Service Call in next step.
When they delivery some item( For Item) for Service Call and finish this service Call. Finaly, they want to create A/R invoice for this Service Call.
Now, i don't know apply down payment that done before for this A/R invoice for Service Call.
Can you help me what way to solve this problem???
Thank you!Hi Tien,
You can use the std Downpayment Invoice feature for your scenario.
1. Create Service type A/R Downpayment invoice
2. Receive downpayment from Customer
2. After completion of service, Create an A/R invoice and apply the Downpayment Invoice before adding the invoice.
System allows even if the A/R invoice is item and the A/R Downpayment invoice is of service type.
Hope this helps.
Regards,
Hamsa -
Down payment for Stock Vendors
Hi,
I need to create a down payment for stock vendors, If I create an invoicing plan but then I get this error saying "Invoicing plan not possible in case of GR-based invoice verification".
My scenario is that do make down payments to Stock vendors based on POs, is there any other way of nadling down payments for stock vendors.
thanksUse transaction F-48 to create the down payment for Vendor.
than once you post the invoice it will know off the downpayment amount when the FI people clearing the invoice you posted.
You can post down payment aginst vendor with PO also. -
Hi,
I am having a query in Asset Down Payment for AUC
I have configured for both Acquisition: down payments and Down-payments clearing account in 'AO90' in asset module.
But I am still not clear why Down-payments clearing account account needs to be configured.
The entry I am getting are
1. F-47 DP request - I enter the Asset number here. Noted item.
2. F-48 -DP- an entry is created as follows:
Vendor Dr 1000
Bank Cr 1000
Acquisition: down payments Dr 1000
Down-payments clearing account Cr 1000
3. Now the Down-payments clearing account shows a credit balance all the time.
How should this be rectified
rgds
VidhyaHi Vidya,
Option 1: When you follow based on your example, ie., asset debited during down payment entry, asset entry will be reversed when you adjust down payment against invoice.
Option 2: Down payment request and down payment made against AUC asset with reference to Purchase order:
With reference to PO: Please refer sap note number 310368 valuated goods receipt paragraph and they have clearly mentioned about making down payments against asset/AUC purchase order without getting debited to asset account.
You have to make F5 378 message number to be a warning message instead of error message and you have to suppress asset related settings in OB41 posting keys 29 and 39. Posting key 39 is useful when you have down payment request.
If you have done this, then it will show only warning message during down payment that "purchase order is related to asset" and it will not be debited to asset account. Also after following the above steps, it is not necessary for you to give Acquisition: down payments G/L and Down payment clearing G/L in AO90 transaction code.
Hope this helps. Assign points if useful.
Regards,
Dwarak. -
Over payments/Under payments for customers
COnfigured the foll for over payments/underpayments for customer:
OBA3 - Maintained toerlances
OBBE - Configured reason code -check marked "charge off difference via separate GL account
OBXL- Assigned reason code to GL account XXXXXX
Ran F-28, still the over payment does not post to the GL account XXXXXX. All it does is it credits the customer for the overpayment amount in new line item.
what am I missing here. we want the over payments and under payments to go this GL account XXXXXX, not to customer account.
The gl account created also has been "Post automaticallyonly" check marked.
please help.yes it is defined as P&L account.it is posting now to gl account for over payment only. when i do an underpayment like $99 and invocie amount is $100, it gives message "difference is too large for clearing". I have configured tolerances, still it throws this message for Under Payments only. Is there any separate place where we configure the under payments for customers. we have only one gl account to whcih we want to post both over payments and under payments
-
One down payments for two customers
I have one payment received for one bank account and it is for the two customers.
Ex : Down payment received USD 100
Customer A USD 75
Customer B USD 25
How can I post these values for both of these customers & bank account from one entry by using f-29
Or is there any other method if F-29 is not possible.
Thanks
NadeeshaDear,
Please use the transaction code F-02 to post as per your requirement. You have to give the posting key as 29 and customer code with special GL indicator , and the same next line then 50 bank account 100. Check your document type give DZ.
Maybe you are looking for
-
On a 5s with 64G, my storage went from under 3Gs to 21Gs after upgrade to iO 8.1. What to do about it?
-
Hi there, We use MainStage 3 to play backing tracks for my daughters shows. From time to time I either have to add a tracks (like a back up vocalist who is joining her for the evening) or I have to make a change to a track that already exist in all
-
Hi I have a problem when i connect my MacBookPro 13 - 2011 to my HDTV Philips PFL8404 through HDMI. Adaptor and the cable work correctly on other HDTV (samsung, Innohit) The issue is that after a few minutes i have a green screen, and than it seems t
-
Where are my apps in the new itunes version?
I cannot find any of my apps on the new itunes version that I downloaded, I can only see what apps I currently have on my phone, but where are all of my previously purchased/downloaded apps?
-
Hi everyone, Can someone explain me why I'm wrong with this code (doesn't work.. not aligned..) : <mx:Canvas width="100%" height="100%"> <mx:constraintColumns> <mx:ConstraintColumn id="col1" width="200"/> <mx:ConstraintColumn id="col2" width="300"/>