Down Payment Posting in Assets Under Construction

Hi
In case of AuC, when we post the down payment, the standard Accounting entry created is:
Vendor Advance A/c Dr
Asset Under Construction (Down Payment) Dr
     To Bank A/c
     To Asset Clearing A/c
When we Post the invoice , the A/c entry passed is
Asset under Construction A/c Dr
      To vendor A/c Cr
When we clear the down payment against the invoice
Vendor A/c Dr
Asset Clearing A/c Dr
     To Vendor Advance A/c
     To Asset under Construction (Down Payment)
My issue is:
1. Why the Asset account should be involved for making down payments? At the time of down payments, the accounting entry that should be passed by the system showuld be
Vendor A/c Dr
    To Bank A/c
2. What happens in the case of year end activities? Why does system create two entries for current assets?
regards
Sanil Bhandari

Similar Messages

Settlement of WBS element down payments to an asset under constructions

The down payment (of the transactions tcode F-47 and tcode F-110), are
always settlement wbs element (tcode CJ88), we do not want to post down
payments to the receiving asset under construction (transaction type
180 or 181).
In the down payments are always taken into account in the settlement to
an asset. The settlement of the down payment is the actual reason for
the previous update of down payments in FI (Transaction type group
15). Furthermore, the settlement of down payments to assets should
not be capitalize.

When you search on this forum try to put Date range "ALL" to get more results. Please read below threads and you will get the solution.
MIRO:Transaction in area 15 contradicts the net book value rule
Transaction in area 01 contradicts the NBV
Looks like you have a negative balance in your WBS which you are trying to settle to FA.

Down payments request for Asset Under Construction

Hello Expert
while Down Payment request to vendors - for Asset Under Construction, system showing error.
Contact your system administrator (table error)
Message no. AA866
Diagnosis
No account has been entered for posting down payments in area 01 under the account assignment key IN95 (chart of accounts YAIN).
Procedure
Enter the account using the Customizing menu.
Pls Reply frinds.
regards,
Riten patel

Dear:
First check in OAYB that have AUC class been specified for down payments and then go to transaction AO90 and maintain the GL account for depreciation are 01 under the Balance Sheet account in the field Acquisition: Down Payment. It will resolve your issue.
Regards

Problem of Down Payment for the Asset under Construction

Hi All:
My problem is, after do down payment for the AuC, we got an additional amount under the values booked of AuC, double checked the accounting document, found that system generated two items when doing actual settlement with t-code CJ88, for example, when display asset value, system lists the value as follows:
Net book value: 194,325 (Normally only has this value under the AuC)
Down payment: 93,950
I don't know why? And how to balance the asset values? Please give me some hint, thanks in advance.
Thanks
Kai
Edited by: Kai Jiang on Jan 14, 2009 6:52 AM

Hi,
I think the system behavior is right ! When posting the final invoice and clearing the down payment the additional items (Down payment: 93,950) were cleared. Go ahead!
Good luck
Tao

Down payment with PO (asset number brought from PO)

Hi experts,
The problem is that when we post down payment in F-48 with PO number, asset number and internal order numbers are brought from PO to FI as well.
However, the assets are not AUC. We actually do not need to trace down payment in asset side.
1) Do we have the option of not having effect to FI-AA?
2) For the IO, would the budget be affected?
Also, the system requires to give default cost element for down payment (OKEP).
3) What kinds of cost element are expected?
Thanks in advanced!

As I do not want down payment posted to asset as well, I changed the message to warning and asset number field hidden. No effect will be posted to AA then.

Down payments for Asset Under Construction

Hi Experts,
Urgent!
My client paying advances to vendors, thru TC-F-48.
Previously there is no PO requirement ,now asper client requirement I put PO fild as requirement in posting key 29.
1)There is no problem for payment to vendors -for Raw materials.
2)while paying advance to vendors - for Asset Under Construction, system showing error.
*Error is:
Contact your system administrator (table error)
Message no. AA866
Diagnosis
No account has been entered for posting down payments in area 01 under the account assignment key 4800 (chart of accounts FTL).
Procedure
Enter the account using the Customizing menu.
Pls Reply frinds.
Regards
vinod

Hi Vinod,
I hope that you are following Valuated goods receipt concept.
Valuated goods receipt: Asset will be debited at the time of goods receipt
Non valuated good receipt: Asset will be debited at the time of invoice receipt
If you follow valuated goods receipt concept, then at the time of making down payment, AUC should not be debited (whatever the value date/ capitalization date be). Please refer SAP note number 310368 (valuated goods receipt paragraph) for reference. In that they have clearly mentioned the steps to make down payment against asset under construction Purchase Order without debiting to AUC and without any error message. You have to make F5 378 message number from error message to warning message and in posting key 29 and 39, you have to supress the asset related fields. If you have done the above settings, then system will not show any error message to update G/L account in AO90 transaction code for the Acquisition: down payments and Down payment clearing - 2nd and 4th field or for AUC related fields.
Hope this helps. Assign points if useful.
Regards
Dwarak.

Settlement of an Internal Order to Asset Under Construction

We are running SAP 4.7 and Iam trying to settle an Internal order to AUC and I get the following error
You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class 18000 (chart of depreciation SEEF). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
**Please take note that the costs which have come on the internal oder are through GR( Goods receipt) and not down payment. Also note that last month, the order settled without any problems!**

Hi,
thanks for your answer.
I want to do that because of some french tax rules.
These rules say that goods, hours or services produced internally for the contruction of an asset can be "delivered" to itself.
So you can register output tax based on the value produced but you have also to register input tax for the same amount.
Finally the balance for VAT amount is 0.
I was interested to know if that was possible to automize. If not, there is still the possibility to make a separate postings at month end or year end.
Best Regards

Down payment for Normal Assets

Dear Experts,
I have an issue on Down payment for Fixed Asset.
User created an Fixed Asset (Normal Asset) which is not a AUC Asset.Created a P.O and Assigned that Asset into the P.O. Now he want to post the downpayment request for the same through F-47. Now they are getting the below error.
You cannot use this transaction type to post to this asset
Message no. AA 834
Diagnosis
The transaction type entered belomgs to transaction type group 15. It has been specified for this transaction type group, that it is only allowed to post to asset classes for which it has been explicitly allowed (for example, the asset class for assets under construction). The asset to which you are posting belongs to class 46 (chart of depreciation XXX). You cannot post to this asset class using the transaction type entered.
Procedure
Check the asset number you entered. You may want to allow posting to this asset class using this transaction type group.
here i have the below doubts.
1. Can we assign the other than AUC Asset Class in OAYB for down payment (Group 15). but the system is showing the AUC Asset Classes only.
2. Can we assign GL Accounts for Down payment and down payment clearing accounts in AO85 other than AUC Asset Classes also? becasue if i check F1 help for those fields its saying only for AUC Asset Classes.
Kindly help me for how to do the down payment for Normal Assets.
regards,
Gopi.P

Hi,
I have a simple solution for you, which treats your down payments made to asset POs also same manner as down payments to normal POs.
Please check the below thread.
[Asset Downpayment;
Regards,
Srinu

Down payment for leased assets

Dear Friends,
I am unable to create Advance payment request for Capital Goods using F-
47 Transation code.
Whether we can post down payment or not?
Pls suggest
Ragards
Babu

Prerequisites
Specify that down payment can be posted ( transaction type groups 15 and 16) in asset classes for asset under construction through t-code OAYB.
hope this help.

Steps for completing Asset under Construction

hi,
i have created the AUC asset class with line settlement checked.
will somebody be kind enough to show me the futher steps involved in customization along with postings and settlement procedure....
regards
sayeed

Hi,
You can manage the asset under construction in the system in two different ways, depending on the types of functions that you need. The asset under construction can be either a normal asset record, or a master record with line item management. As a result, the transfer from the asset under construction to completed fixed assets can be handled in one of two ways:
·        Summary transfer from a normal asset master record to the receiver assets (transaction type 348/349)
·        Line item settlement of an asset under construction that has line item management
The Investment Management (IM) component is recommended for handling large-scale capital investments. Using the IM component, you can manage a capital investment in parallel: for financial accounting purposes as an asset under construction, and for controlling purposes as an internal order or project. For more information, see the documentation for the Investment Management component.
Assets under Construction Without Line Item Management
The procedure corresponds to the procedure for the transfer between two assets within the same company code (see Posting the Splitting or Moving of an Asset). Before carrying out a full transfer of an asset under construction, you have to reverse any down payments that were posted in the current fiscal year. Down payments are ignored for a partial transfer.
Special transaction types for the transfer of assets under construction allow for transfers to be displayed in the asset history sheet as acquisitions to fixed assets.
Assets under Construction with Line Item Management
In the FI-AA component, you can accumulate costs under purely technical aspects in an asset under construction. You do not need to consider the later creation of fixed assets at this point. During the construction phase, you can accumulate all acquisitions for an investment in a single asset. These acquisitions include
·        External activity (acquisition from vendor)
·        Internal activity (internal order)
·        Stock material (withdrawal from warehouse)
in a single asset. When using this 'collective management' of assets under construction, it is possible to manage the individual acquisitions as open items over the course of several fiscal years. At completion, the line items must be cleared and then distributed to the various receivers. The system activates open item management when an asset under construction is created, if you set the corresponding indicator in the asset class. In addition, you have to assign a settlement profile to the company codes involved, in Customizing for Asset Accounting, in order for the line item settlement to work (see Define Settlement Profile in the Implementation Guide). The main function of the settlement profile is to specify the allowed receivers (such as, assets or cost centers).
Hope this helps you. Let me know if you need any other information.
Rgds
Manish

Asset under Construction - Is it possible to calculate depreciation?

Hello Expecrts,
I have a question and in need to get aswers for that- is it possible to calculated depreciation for AuC. And in case of Down payment too.
Please let me know- 1. General senario
2. Diffierent possibilities on depreciation calculation.
Thank you to check the new thread.
Cordially,
partha
[email protected]

Hi Partha Saradhi...
Ordinary depreciation is not allowed for assets under construction in most countries. You reflect this limitation by choosing a depreciation key that does not allow ordinary depreciation in the book depreciation area. To ensure that this depreciation key is protected during master data maintenance, select the asset class as the maintenance level for the book depreciation area.For certain assets under construction, special tax depreciation is allowed. In this case you also enter corresponding keys in the asset class, to be used as mandatory default values.
reward points if u so fit
Dasharathi

Error in dep run - Asset under construction

Hi!
Could someone please help me with the following:
My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
2) Executed depreciation in background.
3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
Please help!
I am very thankful for any help!
Many many thanks in advance!
with regards,
Prabhakar

Hi,
I had the similar situation couple of months back. I followed below mentioned process and it worked out well.
1) Maintain GL account for depreciation in AO90
2) restart depreciation run for the relevant period
3) change the depreciation key to 0000
4) repeat depreciation run for the same period (It will post a reverse entry in the same month itself. So the net impact of depreciation in the same month is zero).
By the way I have a suggestion to prevent this issue in future.
You may not be able to detect this issue on test run if you execute on foreground mode because the test run execution is restricted to 1000 assets. If the error is on 1001th asset, you will not know.
Hence, always execute depreciation test run on background mode, check for any errors and execute production run only if there are no errors.
Hope this helps....
Best Regards,
Madhu

Error in depreciation run - assets under construction

Hi!
Could someone please help me with the following:
My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
2) Executed depreciation in background.
3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
Please help!
I am very thankful for any help!
Many many thanks in advance!

Hi, Can you please how the issue is solved because i have the same problem which i need to resolve immediately. Please reply me as soon as possible
with regards,
Prabhakar

Asset Under Construction(AUC),During month end settlement run(via KO8G)

Hi Guys ,
please hlep on this AUC :
During month end settlement run (via tcode KO8G), if there are -ve (credit) values to be settled to an Asset Under Construction (AUC) asset which does not have sufficient +ve value in the current FY, the settlement run will prompt an error message "Balance for transaction type group 10 negative for the area 01". The TT posted via the settlement run is TT115. To get around, user has to raise a manual journal (via doc type AT) to post the -ve value to the same AUC asset via TT101. TT 115 and 101 are configured differently (see attached).
Since the Fixed Assets system does accept credit posting to AUC via a journal, is there a solution to make posting go through via the settlement run?
Regards,
Narra

You can settle the AUC value in one period and posting can be made in another period. in the same you can give the different asset value date in KO88 screen. The only limitation is this possible only if the fiscal year is same.
Give the asset value date as 15.07.2007 in KO88
Hope this will work
Radha

Asset under Construction for Investment Measures

Hi all
This is my client requirement
how to do asset under Construction for Investment Measures
configration
pls send configration

Hi
These are the steps to be followed:
1. Create a asset class for CWIP (Auc) - OAOA: In this select Investment Measure under Status of AuC.
2. Define Investment Profile (OITA) - Give AuC Asset class as invest measure asset class.
3. Create Internal Order Type for Investments: Normally standard 0650 order type will take care of the requirement. We need not to create anything.
4. Create Asset (AS01) under normal asset class i.e., buildings or vehicles etc... (You cannot create under AuC Asset Class)
5. Create Internal Order (KO01): Give Object class as investment and under Investments tab give investment profile created in step 2.
Go to settlement profile tab and give category as FXA and settlement receiver the asset no. and give 100%.
6. Change asset master to incorporate the internal order number under Origin Tab. Give no. in Investment order field.
7. Release the Internal Order (KO02)
8. Post the transactions through different T.Codes by referring Internal Order as account assignment.
9. Go to Internal Order through KO02 and complete TECO under control data.
10. Go to T.Code KO88 (internal order settlement) and settle the order.
Hope this will help you.

Down Payment Posting in Assets Under Construction

Similar Messages

Maybe you are looking for