Download usb printing support

OK I have unfortunatly have windows 8.1 only because my old computer crashed and was forced to buy it. I hate it for my desktop. Aside from it having to restart IE all the time I am suddenly having problems with my printer. I have a HP Laserjet 1100. Yes its old but it prints wonderfully. People think I must own an expensive printer when they see the copies. Anyway, the last time I printed on my computer was in October of 2014 and it printed fine. Suddenly it won't print now. I tried removing and reinstalling to no avail. I Dled the HP print and scan doctor. It said the drivers were installed but that I needed to click the Get Installer button to DLed the USB printing support. I was expecting it to take me to a page where I could read a disclaimer and click a DL button but instead it to me to the main DL center page. So I did a search for USB printing support and tried DLing a couple different things but DR still says I need to DL the USB printing support. Can someone please get me off this ride. Thank you!

notgettingit
Welcome to the HP Community Forum.
I am not a Laser Printer Expert; I could possibly be wrong about this:
I do not see an answer that contradicts that you have already found: There is not a solution for Windows 8.1 for this vintage Printer.
I spent some time looking at the Windows 7 solution and even for that OS the possibilities are severely limited -- the scan features are stripped and much of the printer's functionality are no longer available. I would not recommend something so radical as downgrading to Windows 7 as a means to save the Printer. You could print, maybe, after a bit of work -- but the functionality is gone.
It might be time to consider an printer upgrade. Sigh. There are some good choices in new Laser Printers if you decide to give one of them a chance.
Good Luck.
Reference:
HP LaserJet 1100 Printer
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Similar Messages

DSL-2750B and USB Printer Support

I just got a DSL-2750B modem/router. In the specs on this page it says it supports a USB Printer:
https://teleproducts.verizon.com/fileshare/plm/brochure/DL2750BVOL_brochure.pdf
On the D-Link Site the manual for this router shows screens to configure it. but those screens don't match the screens I get when I log in to the router. The ones on the router are all branded with Verizon.
If I open the Verizondrive icon showing up in my network I see a folder for Drives and one for Printers. I have tested a USB drive in the USB port on the router, but can't configre a USB printer.
I have talked/chatted with the DSL support folks and they can't help. They told me I had to go to premium support and pay for the call. That doesn't seem right that I have to pay for information on how to configure a device you sold me for a feature that your web site says the device has.
Please tell me how to configure a usb printer for this DSL-2750B

TexasDSL wrote:
I have spent a couple of hours looking for the same information without success. I agree: this seems to me to be basic iinstruction, and Verizon support should provide it without charge .Is anyone at Verizon support listening? Thanks in advance for your help.
I think perhaps you are a bit confused. This is a peer-to-peer support forum. Posters are fellow end-users like you unless noted as a Verizon Employee via rank and/or avatar.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Lexmark does not support USB printing with Airport express

See email from Lexmark:
Hi Herman,
Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
Regards,
Arshad
Lexmark Technical Support
***Original Message***
On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
Dear Mamta,
Thank you very much for your support. I already tried what you
mention, but still without success. I downloaded again the x1100 all
in one driver but still I can't print.
Any suggestions?
Thank you,
Hernan
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, June 18, 2006 7:30 AM
To: hernan
Subject: Re:Lexmark Technical Support (Req# 942782055)
Dear Hernan,
Thank you for contacting us regarding this matter. I appreciate the
opportunity to assist you, and I hope my suggestions will provide a
resolution.
Please follow the steps given below:
1. Click on "Start," "Control Panel" and "Printers and Faxes."
2. Right click on the Lexmark printer icon.
3. Click on "Properties."
4. Click on "Ports" tab.
5. Place a check mark against "Enable Bidirectional Support."
6. Click on "OK."
You may copy and paste the web address given below to access the
Lexmark 1000/1100 Color Jet printer Windows XP driver:
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
1:0:1:0:0&emeafr
ame=&fileID=1580&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark 1100 Color Jet
printer Windows XP driver to your desktop:
1. Click on "Download Now."
2. On the "File Download" screen, choose "Save."
3. The next screen will be titled "Save As." Choose to "Save in
Desktop"
and click "OK."
4. You should see files being transferred.
***Note*** If your browser uses a different file downloading format
than specified above, you will need to resort to your browsers help
files for downloading instructions. The object of steps 1 - 4 is to
download the driver to your desktop. This way it is easily accessible.
5. Once the files have completed downloading, double click on the icon
with your file name.
6. On the "Win Zip Self-Extractor" screen click "OK."
7. To unzip the downloaded file choose "Unzip."
8. A screen will then display the number of files unzipped
successfully, click "OK."
9. Please follow the on screen instructions to complete installation
of your Lexmark printer.
If you have any more questions or concerns, please contact me at your
convenience and I will be happy to assist you. (If I am not available,
another representative will reply to you as soon as
possible.) To respond,
please select "Reply" in your e-mail software, and be sure that the
past e-mail is included in this reply.
[AOL Users: In order to include the previous e-mail, you must
highlight it with your mouse when you are replying.]
If you need to reply, please be sure to include in your message all
information from prior e-mail messages & replies. If your e-mail
client automatically deletes prior e-mail thread information, it will
cause a delay while we look up your support history. If this is the
case you may want to save the old e-mails as attachments and attach
them to the current e-mail.
Sincerely,
Mamta V
Lexmark eSupport Team
http://support.lexmark.com
Rate Your Support Experience! Your feedback is extremely valuable to
us.
Please click the link below to participate in the Lexmark Customer
Support Survey.
http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
07&getSurveyName
=
***Original Message***
On Sat Jun 17th 06:20:55 AM EST 2006,
hernan.>
I purchased the Apple airport express that connects
multiple
wireless-networked PCs to a usb printer.
is there a driver that can make this work?. I configured
the printer
according to the manual, received a test page and so on, but now it
takes ages to start printing and printing never gets to 100%
completion but to 99%. I am not able to cancel printing jobs and this
is a whole mess.
Best regards,
Hernan
vaio pcg-6c2l and IBM x40 Windows XP Both service pack2

Did you have a question?

Can SAPSprint support the printers without own IP address(USB printer)?

Dear all,
We want to switch SAPlpd to the new tool SAPSprint for Server based printing.
Our SAP version is 4.6C. We has SAPlpd on our print server (address is 192.168.214.222).
We have two kinds of printers.
One kind are network printers with own IP address.
The other kind are USB printers without own IP address, need to be connected to user's computer.
Now we have installed SAPSprint on a new server(address is 192.168.214.223).
We found that it is OK for network printer.
For example we have a network printer named NP1, NP1's output device in sap system(SPAD) is named NP01,
Host spool access method is 'S',
our old print server(SAPlpd installed on it) address is 192.168.214.222,
the new print server(SAPSprint installed on it) address is 192.168.214.223.
We install NP1 on the new print server(install driver for NP1 during this process),
then change the config of Destination host of output device NP01 in SPAD,
change it from 192.168.214.222 to 192.168.214.223.
(the config of Host printer we use the same name NP1,no need to change,also use Host spool access method 'S')
It is OK for NP1's using,
the SAPSprint replace SAPlpd to provide sap print service on the new server for NP1.
But for the USB printers, the SAPSprint seem not support.
We have a USB printer named UP1, UP1 is connect to a user computer named CP1,
UP1 is installed on CP1(install driver for UP1 on CP1),
and set UP1 for share as name UP1,
UP1's output device in sap system(SPAD) is named UP01,
Host spool access method is 'S'.
We add the printer UP1 on the old server(address is 192.168.214.222),
notice it is add not istall, printer UP1 is installed on CP1,
it will show as a name 'UP1 on CP1' in 'Printers and Fax' view.
our config of Host printer in SPAD is
CP1\UP1,
the config of Destination host is 192.168.214.222.
This setting is OK for SAPlpd environment.We can use UP1 sucessfully for sap print.
But when also add the printer on the new printer server(address is 192.168.214.223),
and change the config of Destination host from 192.168.214.222 to 192.168.214.223.
We found that this setting doesn't work in SAPSprint environment.
It will reply 'SAPlpd err'.In fact we are using SAPSprint on server 192.168.214.223.
We found the below important information in sapnote 894444:
All printers that SAPSprint uses must be installed on the SAPSprint computer.
In our case, the SAPSprint computer is the new server 192.168.214.223
Network printer NP1 is installed on the new server 192.168.214.223, NP1 can work well.
USB printer UP1 not installed on the new server 192.168.214.223,
it is installed on user computer named CP1, and is set share,
we add UP1 on the new server 192.168.214.223, UP1 doesn't work.
Is this means SAPSprint doesn't support the USB printers (without own IP address) in Server based printing conditon?
Any experienced please give your advice.
Regards
Allen
Edited by: allenGG on Sep 9, 2011 12:00 PM

In fact, finally we found SAPSprint can support the USB printers, but not good and stable enough.
Sometimes the SAP print request of USB printers not printed out, we didn't find why it happened.
And for the network printers, we found it is good working in SAPSprint environment.
We have more than 10 usb printers. They are used for our production department which is 24 hours running.
Since each printer is only used for each user computer(not for share),
so at the end we use front end printing method for these printers.

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

jeanfromisle-arné wrote:
I'm new to MacBook Pro.
My system is Mac OS X v.10.6.8.
I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
where do I find the exact version (in french)
For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

Can an Airport extend a wireless network and support a USB printer at the same time?

Can an Airport extend a wireless network and support a USB printer at the same time?

Yes, if the AirPort Express is extending the wireless signal produced by another Apple router. The Express cannot wirelessly extend a network produced by a non-Apple router.
In addition to extending the network and connecting a printer, AirPlay can also be enabled on the AirPort Express, with all services operating simultaneously.
Please note that only the print function will work if you connect an All-in-One type device to the USB port on the Express. Advanced features like copy, scan, mainentance, etc are not supported when an All-in-One device is connected to the USB port on an AirPort router.

Can I plug any USB printer that supports AirPrint into the AirPort Express?

I'm interested in getting the new AirPort Express to print from my iPhone. Will any Airprint printer work with my iPhone and iPad?

Hi autefrum,
It sounds like we are confusing AirPrint printers with printers capable of being used with an AirPort Express for wireless printing.
AirPrint capable printers have wireless built in so you can print "directly" from your iPhone, no AirPort Express needed.
The AirPort Express has a USB port to which you connect a "regular" USB printer so you can print to that wirelessly. Effectively, it makes your standard USB printer an AirPrint printer by supplying the wireless connection. So if you have a USB printer already, the AirPort Express may allow you to print to that.
From the spec page, "USB 2.0 port for connecting a USB printer" and "Wireless printing over USB requires a compatible printer and OS X v10.2.7 or later, Windows XP, Windows Vista, or Windows 7.
ivan

Mac OS 10.10 Yosemite and HP Printer Support

With the release of the New Mac OS 10.10 Yosemite, HP has provided a list of supported HP Printers, and an FAQ with Yosemite related content.
HP Supported Printers in OS 10.10 Yosemite and FAQ
If you already have an HP Printer installed and working on Mac 10.9 Mavericks, you should have no issues with upgrading to 10.10 Yosemite and still be able to print/scan.
All HP Printers that were previously supported in 10.9 Mavericks, will continue to be supported in 10.10 Yosemite.
If an HP Printer had an Apple in OS driver, it will have a driver for 10.10 Yosemite.
If there was an HP Full Feature Software for your HP Printer in 10.9 Mavericks, then an HP Full Feature Software will be available for 10.10 Yosemite. The amount of time may vary to complete, so please remember to check your specific product page on hp.com in the future to see if an updated HP Full Feature Software is available for 10.10 Yosemite.
Troubleshooting Steps for your HP Printer and Mac OS X 10.10 Yosemite
If your HP Printer is connected to your Network and you are experiencing Communication Issues, and your HP Printer has an Embedded Web Server (EWS) then check the Bonjour Highest Priority Service is set to “9100 Printing”. If this is not your issue, or you are connected via USB, then proceed to “Check Apple for Updates (ASU) listed further down.
Bonjour Highest Priority Service
1. Print a Network Configuration Page from your HP Printer, check hp.com for specific steps for your printer to complete this
NOTE: If your printer does not have an IP address, then you will need to follow Network troubleshooting steps from your HP Printer Product Page.
2. Enter the IP Address of your HP Printer from the Network Configuration Page into Safari or other supported Web Browsers on your Mac
3. Check for a Network tab and click
4. Click on Bonjour on the left side (Click Advanced or Advanced settings if you do not see Bonjour)
5. Locate the “Bonjour Highest Priority Service” drop down and choose “9100 Printing”
6. Click on “Apply” and or “OK” this step may vary – follow prompts to approve changes
If the above steps resolved your issue, you do not have to continue troubleshooting any further. If you are still having issues, please continue to the next steps.
10.10 Yosemite, first off, ensure you have the latest Updates, this includes Apple Updates as well as HP Updates through Apple Software Update (ASU), presently HP Printer Software Update Ver3.0
Check Apple for Updates (ASU)
1. Click on the Apple in the top left menu bar
2. Click on “About This Mac”
3. Click on the “Software Updates…” button
4. Ensure the “Updates” icon is selected, click on “Store” from top menu
5. Click on “Reload Page”
6. Install any HP Updates (Look for the Latest “HP Printer Software Update” by version number)
Note: If you are unable to Print or Scan if this is a multi-function HP Printer, then follow the steps below.
Remove The HP Printer from the Printer Queue
1. Click on System Preferences
2. Click on Printers & Scanners
3. Click your HP Printer to highlight, then click the “-“ symbol below to remove from queue
4. Click the “Delete Printer” button to confirm
Add the HP Printer back into the Printer Queue
1. Click the “+” symbol on the lower left
2. If a drop down listed with printers appears, simply click on “Add Printer or Scanner…”
3. Select your HP Printer or series printer (this depends on the type of connection, USB/Ethernet/Wireless, so choose your HP Printer with the correct connection , IE Bonjour for single function printers, and Bonjour Multifunction for a multifunction printer)
4. After the lower part populate, click on the dropdown for “Use:” and select your HP Printer Series
5. Click on the “Add” button
If the above steps resolved your issue, you do not have to continue troubleshooting any further. If you are still having issues, please continue to the next steps.
Before Continuing, the following steps will remove ALL Printers from Printers & Scanners, you may need your Software/Drivers for those printers to re-install if it is not part of the Apple Software Updates.
Reset Printing System:
1. Open System Preferences
2. Open Printers & Scanners
3. On the left side where printers would be listed, right click and select "Reset printing system..."
4. Click the "Reset" button when asked to confirm
5. Enter your Password and click OK (if prompted)
6. When complete, (notifications may not pop up) you will simply see the blank "Printers & Scanners", simply close
Remove HP/Hewlett-Packard Software:
1. Go to "Finder"
2. Go to "Applications"
3. Locate and open the "Hewlett-Packard" folder
4. If you see an "HP Uninstaller" listed here then run the Uninstaller, if not, then skip to step 8
5. Click on the "Continue" button
6. Enter your Password and click OK (if prompted)
7. When complete, click "Quit"
8. Remove HP or Hewlett-Packard folder (if still listed after uninstall) drag folder to the trash can
9. Right click the Trash Can in the dock, click "Empty" - then confirm to Empty Trash
Repair Disk Permissions
1. Still in Finder, click on Applications
2. Open Utilities folder
3. Double-Click on Disk Utility
4. On the left side, click on the Hard Drive that has 10.10 Yosemite installed on to highlight it
5. Click on the "Repair Disk Permissions" near the lower middle of the window (the amount of time can vary to complete)
6. When Repair is finished, a message near the bottom window "Permissions repair complete”, now you can close Disk Utility
7. Click on the Apple in the left top corner, click on "Restart" to Restart your Mac
Manually Install HP Printer Drivers v3.0
1.This link will take you directly to Apples download for HP Printer Drivers v3.0
2. Click on the "Download" button (remember where your download is if your downloads are not on the dock)
3. Open the "HPPrinterDrviers3.0.dmg"
4. Double-click the "HewlettPackardPrinterDrivers.pkg”
5. Click on the "Continue" button
6. After reading the license agreement, click on the "Continue" button
7. Click on the "Agree" button if you agree
8. Click on the Hard Drive that 10.10 Yosemite is installed on and click Continue
9. Click the "Install" button (this will install the HP Drivers to your Mac)
10. Enter your Password and click the "Install Software" button (if prompted)
11. Click the "Close" button when "The installation was successful." message appears
Add Printer to Print Queue
1. Open System Preferences
2. Open Printers & Scanners
3. Click the "+" symbol
4. Click "Add Printer or Scanner..."
5. Click on "Photosmart Plus B210 series"
6. Click the dropdown for "Use:" and choose "HP Photosmart Plus B210 series"
7. Click on the "Add" button
If these steps did not resolve your issue, you may need to start a new thread with your specific issue, along with Operating System Information, Mac Information, and the HP Printer you are having issues with, along with the type of connection.
Thanks,
Double-U-Dee
Don't forget to give Kudos where Kudos is Due - OR - if a Response Resolved your Issue, Click the "Accept as Solution"
I am an HP employee, but my posts and replies are my own and do not reflect the opinion of HP.

Hi Omar,
I hope we can help get through this, & Thank You! So since at this point it seems the software did have problems, either from being removed previously or just the combination of a few things, upgrade, install, and uninstall.
If this is the only printer you have, then I suggest the following.
1. Go to System Preferences
2. Go to Printers & Scanners
3. (This step will remove all printers from the print queue) Right click on your printer on the left and choose "Reset Printing System"
4. Close out of Pritners & Scanners and System Preferences
5. Open Finder
6. Click on "Applications" on the left side
7. Move the HP or Hewlett-Packard folder to the Trash
8. Click "Finder" on the top menu by the Apple symbol, click on "Empty Trash" (then click Empty Trash to confirm)
9. Close Finder
10. Find the downloaded Full Feature software "HP-Inkjet-SW-OSX-Mavericks_v12.34.40" and attempt to install again
Note: Step 10 is under the assumption that your printer is still on the wireless network, and the mac is also on that same network.
11. Follow the onscreen instructions, including on the 3rd screen (Customer Install) to CHECK the box for "HP Scan".
12. Continue following instructions to install.
If the Printer was not on the wireless network still, then simply plug the USB cable in before running the installer, and choose to install USB to Wireless. When that install is complete and you have added the Printer Queue for Bonjour, you will then want to remove the printer queue for the USB printer.
Please post back your results. (I hope I answered the questions, if I missed something, please let me know)
Thanks,
Double-U-Dee
Don't forget to give Kudos where Kudos is Due - OR - if a Response Resolved your Issue, Click the "Accept as Solution"
I am an HP employee, but my posts and replies are my own and do not reflect the opinion of HP.

Install USB printer on Network Router as network printer

Dear,
I have HP colour laserjet pro cp 1025 printer. It is an usb printer. I want to install it on network using print server.
can i print from devices such as iPad, iPhone, and iPods?
Please help me for this..

Hello JayeshDeshmukh,
Welcome to the HP Support Forums.
Regarding the HP Laserjet CP1025nw being able to print from iOS devices, it has the ability to do so after an firmware update.
You can download the update from the HP LaserJet Pro CP1025nw Color Printer Drivers page. Select the Operating System of computer, download Firmware and use the USB cable connection to install the update onto the printer.
Once the update is installed this HP document: Printing from an Apple Mobile Device should be a great guide to help print from the iOS devices.
Let me know if this helps.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HT4260 Can I make a USB printer wireless with a bridged Airport Extreme?

I am trying to make my USB printer wireless, and am using my AE as a bridged router. Is there a way for the printer to work when connected to it?

The fact that the AE is bridged should not stop the printer being available to the network when plugged into AE..
If you are having issues, are you setting up the network printer correctly.
One big lack in the new utility is the missing printer section.. which is available in the old utility.
There are methods to load 5.6 utility into ML so you can actually see what is going on. Very helpful to have it.. strange to miss it out.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

Intel iMac Postscript printer support

Am considering a new Intel based iMac but have read that not all device drivers in the PPC version of OS X 10.4.4 are supported by the Intel version. Specifically, I have an Apple LaserWriter 16/600 PS and an Imation USB SuperDisk that I wish to continue using. I've heard that the necessary PPDs for the LaserWriter are not included with the Intel based systems. Anyone know if they are supported by the Intel iMac or of a documentation from Apple on that subject? Will buy an iMac G5 if the support isn't there for the Intel. Don't want to find out after I open the box.
eMac 1.25 Mac OS X (10.4.4)

Download Guten Print
http://www.versiontracker.com/dyn/moreinfo/macosx/15970
it has the lastest drivers for the HP printers, yours included. I hope it'll work.
Antonio

Is there a difference between AirPrint and printing via usb printer plugged into an airport extreme?

My printer does not show up in the add a printer option on my iMac when plugged into the extreme. I have a HP officejet 5610 All-in-One. I want to be able to print wirelessly using my Airport Extreme. Thank you

Is there a difference between AirPrint and printing via usb printer plugged into an AirPort Exreme?
Big difference.
AirPrint for one will not work via USB, so you will not be able to print from an iOS device like an iPhone or iPad using this type of connection unless you look at additional software....that may or may not allow this option.
Assuming that you get the All-in-One setup using the USB port on the AirPort.......only printing is supported.
You will not be able to use any other advanced features like maintenance, scan, copy, fax, etc when the device is connected to the USB port on an AirPort.
If you plan to use the HP for other things, I would strongly recommend that you connect it to your computer.
My printer does not show up in the add a printer option on my iMac when plugged into the extreme.
This usually indicates that your printer model is not supported. Check with HP Support to see if they have any updated Macintosh drivers for the 5610 that you could download and install that might allow this.
HP Officejet 5610 All-in-One Printer Drivers - Hewlett Packard

Generic IEEE 1284.4 printing support [ Edited ]Re: Generic IEEE 1284.4 printing support [ Edited ]

Hi, I am following this post as I am having the same problem that I am trying to install LaserJet 1300 on my Window XP computer. I see the post indicates IEEE 1284.4 printer support is included in Windows 7. Does that mean I installed wrong printer driver? From the device driver page, I only see driver for XP 64 bits, Windows 7 and Windows 8 and I selected Windows 7 32bits (because I have Windows XP 32 bits system). or if there is IEEE 1284.4 printer support driver for Windows XP can download?

The basic print driver for your printer are already included within Windows 7 32 bit OS.
1. Plug a USB cable from your printer to your PC.
2. Windows 7 is suppose to automatically detect and install built in drivers.
NOTE: Computer may need to be connected to the internet in order for Windows to automatically download the updated built-in driver list.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&cc=us&dlc=en&lc=en&os=4062&product=899...
By the way, IEEE 1284.4 printing support refers to the much older bi-directional parallel port printers.
http://en.wikipedia.org/wiki/IEEE_1284
Windows may be generically calling it that because it does not yet recognize your printer.
Let me know if this helps.
Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
I am an HP employee.

Generic IEEE 1284.4 printing support

I have Windows 7 32bit and HP Officejet 5110 all-in-one printer. Install of Generic IEEE 1284.4 printing support driver is failed and i can't install my printer. Any ideas to solve this problem?

The basic print driver for your printer are already included within Windows 7 32 bit OS.
1. Plug a USB cable from your printer to your PC.
2. Windows 7 is suppose to automatically detect and install built in drivers.
NOTE: Computer may need to be connected to the internet in order for Windows to automatically download the updated built-in driver list.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&cc=us&dlc=en&lc=en&os=4062&product=899...
By the way, IEEE 1284.4 printing support refers to the much older bi-directional parallel port printers.
http://en.wikipedia.org/wiki/IEEE_1284
Windows may be generically calling it that because it does not yet recognize your printer.
Let me know if this helps.
Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
I am an HP employee.

EA3500 and usb printer

Hello.
I read this manual Connecting a USB printer through the Cisco VUSB software on a Windows-based computer.
And i have last firmware on device.
But when i run CISCOVUSB, i see empty window and error: server is unavailable.
Firewall if off.
What is wrong?
I have Windows 8.1 and HP M1214

Hi 5exi!
I believe it's not supporting yet Windows 8.1. However, you can select the compatibility that you're going to use.
After downloading the Cisco VUSB on you desktop, right it, choose Compatibility, then select Windows 7 or XP.

Download usb printing support

Similar Messages

Maybe you are looking for