Downloading Business Package Business Unit Analyst

Hi All!..
I'm trying to download from SAP Service Marketplace the Business Unit Analyst Business Package, but when I open the zip that contains the package it only has an SCAN FILE, do any of you know what's happenning here? Do any of you has the actual version of this BPs...??
Thanks in advance!!!...
Maria

Hi Maria,
  when you say scan file, do yo mean an file called BPERP4BUA0.sca?  If so that is correct.  In EP6, the archive files you import are SCAs.  Just specify the sca file on the import screen when you go to bring in the BP.
Hope this helps.
John

Similar Messages

  • Offline doc : Business package for business unit analyst

    Hi experts,
    I'm looking for an offline doc for the business package "business unit analyst 2".
    I've found the online doc <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/5e/083f403f0a9354e10000000a155106/frameset.htm">here</a>, but I want something offline, printable.
    Does anybody knows where I can find that ?
    Regards
    Quentin

    Hi Sunil
    Your point about the prerequisites lead me to the solution. The settings were wrong in Virtual Room settings in the Visual Administrator and the Collaboration Room Backend Properties in the portal. These need to be correct as a virtual room is created by the system when the planning round is created.
    Thanks
    Fergus

  • Use of MSS or Business Unit Analyst for FICO Forms.

    Hi,
    Please let me know  about FICO following forms:-,
    1.Create Cost Center
    2.Create Profit Center
    3.Change Cost Center
    4.Change Profit Center.
    We could not get navigation for FICO forms in ESS/MSS package for Adobe Interactive forms.
    It shows that all FICO forms are available under this Business Package.
    From the SDN I could get information about "Business Package for Business Unit Analyst 2.0 (mySAP ERP)"
    http://help.sap.com/saphelp_erp2005/helpdata/en/5e/083f403f0a9354e10000000a155106/frameset.htm
    Kindly guide us on the FICO forms issue. Use of MSS or Business Unit Analyst.Please let me know also whether it is not adviced By SAP to use Profit center in Portal.
    Thank you,

    Solved

  • Business Unit Analyst

    Can we have a configureation document for +Business Package for Business Unit Analyst+
    Regards,
    Sujana

    Hi Sunil
    Your point about the prerequisites lead me to the solution. The settings were wrong in Virtual Room settings in the Visual Administrator and the Collaboration Room Backend Properties in the portal. These need to be correct as a virtual room is created by the system when the planning round is created.
    Thanks
    Fergus

  • Business Unit Analyst create planning round problem

    In the Business Unit Analyst 2.0 (mySAP ERP 2005) portal business package when creating a planning round I can go through to the 3rd screen "Review and Save", but when I hit save the following error appears on the screen and it does not save the planning round:
    java.rmi.RemoteException: Service call exception; nested exception is: java.net.ConnectException: Connection refused: connect
    I am using java version 1.4.2_12-b03.  The portal is NW2004s stack level  8.
    Has anyone found the same problem?
    Regards

    Hi Sunil
    Your point about the prerequisites lead me to the solution. The settings were wrong in Virtual Room settings in the Visual Administrator and the Collaboration Room Backend Properties in the portal. These need to be correct as a virtual room is created by the system when the planning round is created.
    Thanks
    Fergus

  • How to do download business packages?

    Hi,
    I want to download business packages from SDN ,please tell me the procedure.
    Thanks & Regards,
    Indhra.E

    Hi,
    To downmoad BP from SDN :
    go to SDN community -> SAP Netweaver -> Portal -> Portal Content Porfolio
    This is the direct link
    <a href="https://www.sdn.sap.com/irj/sdn/contentportfolio">https://www.sdn.sap.com/irj/sdn/contentportfolio</a>
    Hope this help
    Vincent

  • Unable to download Business Package for BI Administration

    I'm not able to download Business Package for BI Administration under Portal Content Portfolio.
    Can anyone help me?
    /Mikael

    May someone give me the path in the SAP marketplace to get it? 
    I have not been able to find it.
    Thanks,
    Juan

  • Unable to download Business Package for BI

    I'm not able to download Business Package for BI Administration under Portal Content Portfolio.
    Can anyone help me?
    /Mikael

    It was a temporarily problem at SAP marketplace.
    It is now solved.
    Edited by: Mikael Svedén on Jan 11, 2008 8:27 AM

  • Failed to download Business Package

    I would like to download Business Package ESS 50.4 MSS 60.1.5. But this week I can't download them from my ID. I can't find them in Service Marketplace either. Do you have any idea? Thanks a lot.
    PS. If you have these file, could you send to [email protected]?

    There are several users reporting this problem.
    Try downloading them directly:
    Business Package for Employee Self-Service 4.6C - 4.7 50.4:
    https://websmp205.sap-ag.de/~swdc/011000358700005104712004D/BPESS46C504_0-20000613.ZIP?_ACTION=DL_DIRECT
    Business Package for Employee Self-Service 4.6B 50.4:
    https://websmp204.sap-ag.de/~swdc/011000358700005104692004D/BPESS46B504_0-20000612.ZIP?_ACTION=DL_DIRECT
    Business Package for Manager Self-Service 60.1.5:
    https://smpdl.sap-ag.de/~swdc/002007974700000001482005D/BPMSS601_5-20000629.zip?_ACTION=DL_DIRECT
    Support Package for Manager Self-Service 60.1.5:
    https://smpdl.sap-ag.de/~swdc/002007974700000001472005D/SPMSS601_5-20000629.zip?_ACTION=DL_DIRECT
    Regards, Karsten

  • Report of all sales orders for a business unit

    I am analyzing revenue, and I would like to run a report that would list all sales orders and the value of those orders in a particular business unit.
    I require the value of each and every sales contract during a certain period. Can I run a report that lists all sales contracts opened during a particular period?

    Hello,
      from the standard SAP menu, under: "Logistics --> Sales and Distribution  --> Sales --> Information System  --> Orders" you can find some transactions reporting sales orders lists, such as VA05 or SDO1, which perhaps could fit your requirements. Otherwise you can create a query to merge the tables containing the information that you need. As of my knowledge there's not an organizational level called "Business unit" in SAP, so you should check if in the transaction mentioned above the field you use to identify the "Business unit" is available.
    Hope to be useful.
    Best regards,
    Andrea

  • Questions on setting up PeopleSoft FIN AP Business Unit for India with TDS

    Hi,
    Does anyone here have some advice for me on how to handle AP transactions for a business unit set up for India with TDS (withholding) and statutory reporting.
    We are configuring AP BU for India in our existing database which has other BUs for other countries not using withholding. For India the way we understood on statutory is that all invoices must be recognised for withholding at the time of invoice entry or payment which ever ealiest. For PeopleSoft we always have to create voucher before we can make mayment so the earliest occurace will be at voucher entry that withholding should be deducted (at voucher post).
    The problem that we are encountering is that if we have prepayment invoice, we can use prepaid voucher to record this. However, when we receive the final invouce and entered into PeopleSoft the voucher post reversed the original withholding lines and recreate in the final invoice with final invoice amount. This could be in different period. As for the India rule the way we understood this is that the entries that created at prepaid should not be reversed, also those withholding might already be paid to the goverment in prior period before receiving the final invoice. The final invoice should have withholding calculate just for the difference of the invoice balance.
    Our other problem is on the statutory reporting that all transactions should be recorded in that particular period. Our current setup has AP close period at the end of each month which means we cannot enter invoices raised in previous period or have adjustments put in the period that already closed.
    Any help and advice on how companies that has India AP business unit deal with the above mentioned issues are much appreciated.
    Thank you.

    Thanks Marc Sachdeva.
    I don't mean where to set up withholding. I have alredy configured all withholding details and everything works fine in AP.
    However, as India statutory comes in, I'd like to know how other companies handle cases like accounting entries for transactions in specific period if your system has AP/GL closed periods. Normal cases would be put entries in the next accounting period. But as my understanding on the Indian rules is that withholding must be recorded at the time of entering the invoice. So how should adjustment be made.
    Another thing is the prepayment invoices, using PeopleSoft Prepaid voucher would cause the accounting entries for withholding lines to be reversed and then re-recorded when posting the final invoice (that matches with the prepaid). I would like to know how companies are dealing with such case as the TDS lines could be revsersed and recalculate in different accounting period. Also if the period that it revsered the TDS % could have changed and when the reverse happens it will recalculate withholding based on the new rate for the whole of invoice amt.
    For example an invoice of 10000 INR, 50% is to be recorded and paid in advance so raise the invoice of 5000 INR in Feb. TDS is 10%.
    - So vendor will be paid 4500 and 500 is for withholding.
    - In April then receive final invoice of 10000 INR, record into PS as 10000 but matched to prepaid so the remaining invoice is 5000. withholding rate in Apr is now 15% so 15% should be applied to the remaining invoice of 5000 INR. As the prepaid voucher option reversed withholding lines and recalculate with final invoice total so the withholding to be deducted is calculated at 15% = 1500 (10000 * 15%).
    - As the prepaid invoice withholding might have already been paid in March before the rate changed, the final invoice should have withholding of 750.
    I'm not sure if my understanding of recording withholding for India is correct and whether it really needs to be recorded in the month that invoice is raised. As the way I understood and have been told it has to be recorded in that month. I.e. invoice received on 30 April must be entered into accounting period of April. Our business close AP/GL about a week before the end of month so if we receive invoice on 30th April but our AP/GL already closed on 25th Apr then 30th Apr invoice should go to May accounting period. As statutury requirement is to record this into April. How does anyone handle this?
    Thanks.

  • How to set up Pymnt Method for different business units

    Hi,
    Can anyone shed some light as to how to set up P Method in FBZP in a way that one type can be identified according to its Business Unit?
    To clarify, FBZP is currently set up in a repeated way:
    Pymnt Methods:
    T - Transfer - Business Oil
    S - Transfer - Business Engineering
    V - Transfer - Business Equipment
    A - Boleto - Business Oil
    N - Boleto - Business Engineering
    C - Boleto - Business Equipment
    As you can see, we are repeating same payment method as it is needed for business to identify which business unit this refers to.
    Is there a way of setting up only one type of Transfer and one type of Boleto and how this will categorize the type of Business Unit ??
    Any input is welcome
    Regards
    Roger

    Hi Roger:
    How about some enhancement on F110? The logic would be something like read all the proposal lines, group by profit center and then re-assign the payment method based on profit center. There are couple of user exits available starting with RFFOX###, depending on the payment method and the program you using.
    Something similar to substitution rules user exit.
    Not sure if there is any other standard configuration to combine lines by profit center.
    Thanks.
    Rahul

  • How to Capture Multiple Cost centres and Business Unit information in a project?

    Dear Experts,
    With the help of UDA functionality in project super responsibility, I have captured Cost centre and Business unit information and this info will be used/reflected in CC and BU segments of all transactions gets recorded against that project.
    Now, our user wish to have multiple cost centres and business units to be tracked in the same one project. How is this feasible? Below example describes my requirement in a summary, please advise.
    An Indirect project is created when a defect on a machine reported from client's customer and all subsequent activities (purchases, travel to customer site to analyse and troubleshoot, purchases for any in-house analysis etc..involves costs spending internally) in resolving that defect/project involves 6 to 7 different departments (Sales, Tech Support, Quality team etc.,who actually work/travel and spend costs against project until defect resolution). And, each of the above departments will have 1 dedicated owner (project owners) to manage that project and each of these 6 or 7 owners owners will have their own cost centres (eg: 2345 - Sales team) against which they wish to see their transactions (travel, purchases during defect resolution) globally.
    So, all I want to know is how can I make one single project to accommodate multiple cost centresand business unit information to be assigned using UDA? Please let me know if I am not clear.
    Regards
    Venkat

    I think you should use the expenditure organization on the transaction itself to derive the CC/BU. Have AA lookups and define AA rules where you look at a Exp Org to BU or Cost Center to derive accounting.

  • Unable to Create Contract Templates In Other Business Units In Fusion Contract Management

    Hi All.
    I am working on Fusion PPM Release 9.
    I Have set Profile Options HZ_DEFAULT_BU_CRM to SH-Business Unit & HZ_ENABLE_MULTIPLE_BU_CRM to Yes in task Manage Administrator Profile Values.
    But LOV is showing only SH-Business Unit. I am not able to get other Business Units In LOV & Not able to create contract Template.
    Any help regarding above issue is Appreciable 
    Thanks
    Shaan

    Hi Vara,
    Check the basic settings for Student Contract accounting. Are you using "Create RFC Destination for Automatic Creation and Update" functionality? Please check that whether you have maintained any RFC or not. If yes, then remove that.
    The automatic creation function causes the system to automatically create a student account with the account-specific master data when it creates student master data. Check this in SAP_CM_ACCOUNT_DATA_UPDATE.
    The automatic update function causes the system to automatically update the relevant account data when it updates account-specific student master data.
    You can activate and deactivate the automatic creation and change function. You make this setting in the IMG activity (De)Activate Automatic Student Account Creation and Update.
    Regards
    Vinod Kumar

  • Payments are not allowed for business unit ..... (6000,568)

    Hello,
    Did anyone ever have the same error message 'Payments are not allowed for business unit (6000,568)' so that he can tell me what I did wrong?
    I get this message when I click on 'add' on the regular or epress deposit pages
    I have set up the payment options at BU Level so I have no idea what to do know.
    Regards,
    Stijn

    I forgot to creae the group type P ....

Maybe you are looking for