DQS Term-based relations value contains white space is not allowed

Hi
SQL Server 2012:
I have a term 'R & D' which i would like to replace with 'Research and Development'. How do i incorporate it in the DQS 2012 cleansing?
I want to replace 'I C G E B' with 'International Centre for Genetic Engineering and Biotechnology'. I created a Domain values. On cleasning, it corrected the source value 'Centre for Genetic Engineering
and Biotechnology, Cuba' with 'International Centre for Genetic Engineering and Biotechnology' with Confidence score was 81%. Not sure, why is it replacing. I have only one domain value. I have
no other rules or term-based relations during my testing. Probably it took the initials of 'I C G E B' and partially matched in 'Centre for Genetic Engineering and Biotechnology, Cuba'.
Any solution how to solve this.
Any help much appreciated.
Nikesh Shah
Nikesh Shah

Hi Nikesh, 
If I understood you correctly, it is correcting your string because you gave it a domain value and no rules to guide the correction behavior. This way, DQS is comparing everything with that domain value to check if it is similar, and that stringwas similar
enough, so DQS corrected it to the value you said "it was the only one valid in the domain"
You can implement that correction in two ways
- Using a term-based relation, specifying that every time DQS encounters the string "I C G E B" (even inside other strings) it will replace it with International Centre for Genetic Engineering and Biotechnology
- Specifying a correction in your domain values. Manually insert the value "I C G E B", mark it as an error and specify its correction with International Centre for Genetic Engineering and Biotechnology. 
Given your case, I'd rather take the first option, because we are talking about a replacement of initial letters, not about a correction. If you take the second option, you will get weird corrections as you have encountered already. 
Regards. 
Pau.

Similar Messages

  • Term Based Relations SLOW to edit.

    I have a Domain of Address line information, and am adding Term Based Relations to do things like change "St" to "Street". Fairly straight forward.
    But while adding values to the list, the interface is PAINFULLY slow. When I click the Add button and start typing in the box, the characters don't show up right away. I can be 10 characters typed ahead of the screen.
    Then when I click Apply Changes, the "In Process - Please wait..." message stays up for a couple of minutes.
    What is going on? I only added ONE ROW and it take three minutes to save it?
    THIS IS PAINFUL.
    How can I speed this up, if it is even possible? Is it dependent on the number of rows in the Domain? I have like 30,000 address rows. Is it checking all the TBR's against all the address rows? I thought it would only do that when you actually RAN the project,
    NOT when you are trying to DEFINE it.
    Plus, when I switch from one Domain in the Project to another, it takes like 10 or 15 seconds to bring it up.
    Todd C - MSCTS SQL Server 2005, MCITP BI Dev 2008 Please mark posts as answered where appropriate.

    Hi Nikesh, 
    If I understood you correctly, it is correcting your string because you gave it a domain value and no rules to guide the correction behavior. This way, DQS is comparing everything with that domain value to check if it is similar, and that stringwas similar
    enough, so DQS corrected it to the value you said "it was the only one valid in the domain"
    You can implement that correction in two ways
    - Using a term-based relation, specifying that every time DQS encounters the string "I C G E B" (even inside other strings) it will replace it with International Centre for Genetic Engineering and Biotechnology
    - Specifying a correction in your domain values. Manually insert the value "I C G E B", mark it as an error and specify its correction with International Centre for Genetic Engineering and Biotechnology. 
    Given your case, I'd rather take the first option, because we are talking about a replacement of initial letters, not about a correction. If you take the second option, you will get weird corrections as you have encountered already. 
    Regards. 
    Pau.

  • To be included jar path containing white space....

    hi,
    I have develop an application which is linked with some jar files at run time. Now those jars are in my application directory and as I have put my project in path c:\program files\proj(which contains white space) so while running the application its producing following error:
    Caused by: java.net.URISyntaxException: Illegal character in path at index 13: file:/C:/with space/repro-designer.dir/CO
    NSOLE-INF/lib/ant-1.7.0.jar
    at java.net.URI$Parser.fail(URI.java:2809)
    at java.net.URI$Parser.checkChars(URI.java:2982)
    at java.net.URI$Parser.parseHierarchical(URI.java:3066)
    at java.net.URI$Parser.parse(URI.java:3014)
    at java.net.URI.<init>(URI.java:578)
    at java.net.URI.create(URI.java:840)
    ... 21 more
    14:11:13,734 DEBUG [Application] Application destroying...
    14:11:13,734 DEBUG [Application] ContextFactory destroying...
    14:11:13,750 DEBUG [Application] ContextFactory destroyed.
    14:11:13,750 DEBUG [Application] Application destroyed.
    and if i put the project in such a path where isnt any white space, its working fine. Can any one help me out....
    regards
    Sudip

    try this :
    c:\program%20files\proj

  • I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

    I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it.  It has worked in the past but I downloaded the update today and photomerge will not work correctly.  Any ideas?

    hedger,
    How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTR

    Hi all,
    BAPI' BAPI_MATERIAL_SAVEDATA' throws error the below error while creating material.
    'The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTRL_CODE'
    Any idea abt this error.
    Regards,
    Thiyagu

    Hi,
    As this BAPI is triggered from external sytem that by client in production environment , I would not be able to dig it further.
    Thats why I asked if anybody confronted the same error previously.
    Thanks for suggestion.

  • Payment Terms based on Value Date (UDF)

    Hi, is it possible and if how? I want to create a new Payment Term based on a value date which is maybe months ahead. So the docduedate is after this value date but the document shall already go into accounting.
    how is this easily possible?

    Hello,
    If you mean that the payment due date in the payment terms should be calculated on the basis of some date specified in a udf, it is not possible.
    But what you can do is use formatted search to calculate the due date based on the udf. apply this formatted search in due date field.
    Rahul

  • If the LDAP "icsCalendar" value contains a space, an error will occur when creating events or tasks

    If a user's LDAP
    "icsCalendar" value
    contains a whitespace, the user will still be able to log in to the iPlanet
    Calendar Server(iCS). However, the user will receive a bad request
    error when creating events or tasks. The event or task is created,
    but the error will occur every time the user tries to save one.
    The "icsCalendar"
    preference cannot have a space in it. To avoid the above problem,
    the administrator must fix this value in LDAP.

    Hi Mahendra,
    check the following links:
    http://www.sapgenie.com/saptech/lsmw.htm
    http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
    May be u can find some help.
    Hope this helps you.
    Regards,
    Anuradha.B

  • Jquery - Accessing class name which contain white space

    Hi,
    My html table code is
    <- table class="t20Region t20ReportRegion" ....;>
    now I have to use the above class name "t20Region t20ReportRegion" in the below jquery . how to do this
    $header = $('table.class_name tr:first');
    how to substitute / enter class_name which has white space in them ( "t20Region t20ReportRegion" )
    Thanks in advance
    Shijesh

    I will be patient from next time.
    Thanks Dan,
    The changes made by you is working for standard template.
    However, when i created a custom report template in which I have two row for Colum Header ( Main
    Header and Sub Header), its not working.
    Credentials are the same.. and same page nos.
    How to change the code so that it will work for custome report template as well
    if a user click on total under Col1 or Col2 , i was trying to pass Header1 + ' ' + col1 or Header1 + ' ' + col2 ( concatenation of header1 and col1/2 with space in between)
    if a user click on total under Col3 or Col4 , i was trying to pass Header2 + ' ' + col3 or Header2 + ' ' + col4 ( concatenation of header2 and col3/4 with space in between)

  • Airport Utility doesn't see Airport Exteme (White space ship, NOT THE BLOCK

    Seems to be a 10.5 issue, my 10.4.11 machine and Airport Admin utility works fine BUT, my Leopard machines are online just fine and the Admin Utility or the Utility do not see the AEB--AGAIN, THIS IS A 802.11G WHITE SPACE STATION SHAPED AEB, NOT THE NEW BLOCK OF WOOD SHAPED AEB I've already read about the apple fix for reseting AND IT DOES WORK for this model.
    Any thoughts out there?
    G

    Mark, I'm sorry to seem obtuse, but I remain confused. Since no one else is jumping in to help you, please help me understand.
    The link you referenced doesn't seem to have anything to do with the 802.11n AEBS. That unit has its own forum and this isn't it. Apple hasn't made things easier by giving two different Airport units the same name, but since yours is not an 801.11n AEBS, don't get sidetracked by it.
    The Apple procedure for resetting the AEBS that you have is detailed here. You said it works for your model AEBS which it certainly should. How were you able to determine this?
    Next, if you're getting online with all your computers, and the issue is just that your Leopard clients can't see the AEBS in Airport Utility, I'd begin to suspect something is wrong with a Preference file related to Airport Utility. I don't have Leopard, but there must be a file that corresponds to something like the following:
    ~Library/Preferences/com.apple.airport.airportutility.plist
    Try dragging it to the Desktop, log out, log in again, and see if that changes anything. If it doesn't, try the same technique with the following Preferences file:
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    You'll have to recreate your System Preferences > Network settings after this one.
    If it mucks up things even worse, you can always drag those files back and undo those steps, but I think a Preferences file somewhere is to blame.

  • Terms of payment for Special G/L transactions not allowed - FB60

    Hi all,
    I'm facing a problem regarding FB60. When using Special G/L code in FB60, the field "Payt Terms" (BSEG-ZTERM) doesn't appear in "Payment" window.
    I've found a SAP Note (9344) about the same problem, but I don't know if the issue was solved.
    If anyone knows how to solve this, it would be great. Thanks a lot.

    Hi Atif,
    I've made all the changes that you have suggested, but the problem still remains. For Reconciliation account that I'm using, I've changed Field Status Group from Payment to "Optional", and the same to posting keys for Special G/L transaction.
    The Note 9344 is about this problem. Do you know if it still remains?
    Thanks!

  • Keep white spaces and carriage returns?

    I'm viewing a column -VARCHAR2(4000)- in a standard report column.
    The column value contains white spaces and carriage returns.
    I put "white-space:pre;" in CSS Style, but it still skips carriage returns...
    What can I do to view white spaces and carriage returns?
    I'm using apex 3.0 and IE 7.
    Saad.

    I'm using apex 3.0 and IE 7.There's your problem...
    IE6 (and, since there don't seem to be any docs saying anything different, presumably IE7) don't support white-space: pre in quirks mode. Don't ask me why - probably in one of MS efforts to "not break the web".
    All the APEX built-in templates are rendered in quirks mode as they don't supply complete DOCTYPEs. If you are using a standard APEX template or a custom template without a complete DOCTYPE declaration you are probably seeing this quirks behaviour.
    It looks like this will change in IE8.

  • White spaces in bind variables

    While calling a Report(based on sql with a bind variable) from a Form and passing a value with white space to the bind variable gives the following error:-
    Error: An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)
    Also, attempting to translate white spaces is not helpful for bind variable.
    Any help would be appreciated.
    Thanks,
    Gopi.

    Thanks for you replay Reddi,
      Let me explain the scenario: The scenario is RFC --> XI  --> JDBC, one of the element of the FM sometimes could be have the value "      ", when this occurrs in the SXMB_MONI TC I see the value null in the element, that is the tag is <Element />, in this case I need to preserve this white space in the element. The message could be something like this:
    <root>
      <element1>value 1</element1>
      <element2>value 2</element2>
      <element3>      </element3>
    </root> 
    but I see the message in this form:
    <root>
      <element1>value 1</element1>
      <element2>value 2</element2>
      <element3 />
    </root>
    In the message mapping tool I assign the string value "      " and the problem still the same.
      Any Idea?

  • White Space in Table

    Hi all,
    I have created a gallery http://www.davewharton-toastmaster.co.uk/new_site/gallery1.html but the white space is not consistent, there is more vertically than horizontally and looking at the HTML and CSS I can't see what is causing it, could someone let me know how to get it consistent?
    Many thanks
    Nick

    Hi John,
    Thats fantastic, sorted thank you.
    Just a side note though, all the pages I've designed in Dreamweaver display just <!doctype html> is it better that they have <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    Many thanks
    Nick

  • Unwanted white space in Illustrator CS3 EPS

    Hai All
    I am facing a problem with the specific image find the attahced.
    There is no white space in images (87862fig2_3.eps) if we open it in “Adobe Illustrator CS3”. We have imported the same image in “In Design CS3”, but there was some white space exists in top and bottom of the image. I have opened the same image in the Adobe Illustrator CS3 and "Save As" the same now the white space is not appearing around the image.
    Please advice why i am facing this problem
    Thanks in advance
    Mathew

    I downloaded the eps and I opened it in AI and there was no problem I saved it as an AI file and placed it in ID and had no problem I then saved it as a eps and had no problem when placing it in ID. This would be on a Mac.
    I do however get the same result when I place your eps in ID it goes away when I open in AI and then save it out again from AI as an eps or ai file.
    This is with CS 4.but I do not recall ever seeing this problem in CS 3? I attached the files I saved from AI CS 4 see if there still exist the problem when you place these files in ID or AI? I think the problem will not be present.
    What are your setting when saving from AI as an eps?

  • How to raise an error message when duplicate value is entered in a tabular field column? Basically not allow duplicate value at the form level.

    Hi all,
    I have created a form with one data block MATURED_FD_DTL which looks like below:
    ACCT_FD_NO
    CUST_CODE
    FD_AMT
    FD_INT_BAL
    TDS
    CHQ_NO
    ADD_FD_AMT
    P_SAP_CODE
    P_TYPE
    CREATE TABLE MATURED_FD_DTL
      ACCT_FD_NO    VARCHAR2(17 BYTE)               NOT NULL,
      CUST_CODE     NUMBER(9),
      FD_AMT        NUMBER(15),
      FD_INT_BAL    NUMBER(15),
      TDS           NUMBER(15),
      CHQ_NO        NUMBER(10),
      ADD_FD_AMT    NUMBER(15),
      P_SAP_CODE    NUMBER(10),
      P_TYPE        VARCHAR2(1 BYTE)
    For MATURED_FD_DT.ACCT_FD_NO, Trigger: KEY_NEXT_ITEM, I have written the following code:
    DECLARE
    V1 NUMBER;
    V2 NUMBER;
    BEGIN
    V1:=:MATURED_FD_DTL.ACCT_FD_NO;
    MESSAGE('V1:'||V1);
    MESSAGE(' ');
    END;
         GO_ITEM('MATURED_FD_DTL.CUST_CODE');
    This is just a dummy code.
    When ever i enter the value in the field of ACCT_FD_NO, it pops up a message saying "V1:Value of ACCT_FD_NO",
    So i want to store that value .
    Compare them & if it is egual, it should pop up a message saying duplicate value is entered and must not allow to enter, at form_level.
    So how can I compare the ACCT_FD_NO value between FIRST_RECORD and NEXT_RECORD ??
    Help Me .
    Thank You.
    Oracle Forms 6i.
    Oracle 9i.

    Thank You HamidHelal.
    Actually before posting the code, I went through the first link you have mentioned. I tried also, it is quite tedious procedure, however i dint get the proper result, may be i have done some mistake. Anyways , can you tell me how do i check in database table, if a value exists OR IF VALUE FOUND & then message and raise form trigger failure; something like below.
    IF :MATURED_FD_DTL.ACCT_FD_NO EXISTS
    THEN MESSAGE('YOU HAVE ENTERED AN EXISTING OR DUPLICATE VALUE');
              MESSAGE(' ');
    RAISE FORM_TRIGGER_FAILURE;
    END;
    OR
    IF :MATURED_FD_DTL.ACCT_FD_NO FOUND
    THEN MESSAGE('YOU HAVE ENTERED AN EXISTING OR DUPLICATE VALUE');
              MESSAGE(' ');
    RAISE FORM_TRIGGER_FAILURE;
    END;
    Is there any equivalent in the form in oracle forms 6i?? Please let me know how do i do this??

Maybe you are looking for