Drill-down to line items in drill-down report (FGI0)

Dear All,
I have a problem regarding executing drill down report in FGI0
When executing the drill down report FGI0 , I try to drill down to the line items from Goto-> line items but it's deemed & I can't run it.
I searched a lot and found only one link but didn't help
Customized drill-down report cannot go to line item level (FGI4 and FGI1)
Please help as it's very important issue

this is due to authorisation limit.
Ithink you do not have the access to view the 2009 GL balances.

Similar Messages

  • PO (Line Items wise) Payment Status Report

    Hi Friends,
    Is it possible to get a PO (Line Items wise) Payment Status Report.
    My client wants PO Line wise payment status as a MM report development.
    We have Down Payment, Residual & Retention money as a business practise with our vendors
    Following is the MM-FI flow in our company code..
    Create & Release PR u2013 MM - Creating PR
    Create & Release PO (ME21N) u2013 MM u2013 Creating PO
    F-47 Down Payment Request u2013 MM u2013 Creating DPR
    F-48 Post Vendor Down Payment u2013 FI - Posting DPR
    FBZ5 Print Check for Payment Document u2013 FI - For printing cheques for DP only
    MIGO/ML81N, GR u2013 MM u2013 SES/GR for PO
    MIR7/MIR6 IR - MM/FI u2013 Parking & IR
    F-44 Clear Vendor u2013 Linking advance with IR (as residual clearing)
    F-53/F-58 u2013 Posting Payments after deducting Retention
    F-04 Post with Clearing u2013 Clearing Outgoing account entries with Main account
    Thanks in advance.
    Regards,
    Vikrant Sood

    as per my knowledge you can configue a new Z table or prepare a Query using EKPO table you will your desired result.
    regards,
    Ninad Kshirsagar

  • How to copy line items from one expense report to the next

    I travel to the same project/destination every week so in PR05, I was able to just copy the previous expense report for the new week and edit the expense values. Now, when I book travel, the air line booking starts a new expense report entry.
    Is there a way to copy the employee-paid expenses to the GetThere-generated trip entry expense report, i.e. just copy the line items from one expense report to another that already exists. I guess that would be a merge function.

    Hi Tom,
    Here are two alternative solutions:
    Alternative 1:
    If you copy the expense report before you book the services (flight, hotel …)
    in GetThere, then the airline or hotel bookings will not start a new expense
    report but will be assigned to the copied expense report.
    Alternative 2:
    This alternative is a bit laborious.
    Shift the start date and end date of the expense
    report  that was automatically created by
    your flight booking for next week (e.g. Calendar Week (CW)  47) to the week after next week (e.g. CW 48).
    Copy the expense report of the previous week (e.g.
    46)
    Afterwards open the expense report that you
    moved to CW 48 and click on the tab strip itinerary
    Now assign the bookings (flight, hotel …) to the
    expense report of CW 47 by clicking on the button assign to existing trip
    Later delete the expense report in CW 48
    Get back to me if you have any questions concerning the alternatives outlined
    above.
    Note:
    These solution alternatives are only available for customes using HTML5 UIs.

  • Prevent user from view line item details in KSB1 report

    Hi,
    how to restricting user from view line item details by double-click on it or highlight an item click on Document?
    Regards,
    Kelvin

    Hi,
    This issue got resolved.
    SAP suggested to execute the program "FAGL_CORR_0001" for company code wise.
    In ECC 5.00 from support pack 10 onwards two new fields has been added to table FAGLFLEXA.  (earlier we are on support pack 9, recently we applied the latest support pack)
    If we can execute the above program FAGL_CORR_0001, the two new fields will filled with relevant data and then we can able to use drill down option.
    This is for your information.
    Message was edited by:
            prasad naga

  • How to display the number of line items in sap-script report?

    Hi friends,
    I need a help regarding the SAP Script. In my script (report) I create two pages and created three windows (MAIN, HEADER, FOOTER) for each pages. Now the problem is while displaying the fewer line item which can come under the main window of the 1st page these line items are comming perfectly but for the remaining line items that comes on the second page the table headings and the boexs are not comming.
    Also it is displaying the total and the amount in text in every pages that should be display in last page.
    Here if I eleminate or comments the total and the amount in text for the first page the same is reflected in second page. Also I need to display the page-nor for each pages to displayed.
    I am requesting all the people out there kindly help me to solve this issues.
    Thanks and Regards

    There is no pre built solution for this. But we can show total pages in the report body.
    one way is Create a other column in the report with code sum(count(1))/25. that gives you total number of pages. 25 here is no of rows in each page. The code you can write in narrative "Total pages in the report are @5" and out put may be "Total Pages in the report are 30".
    If you are using pivot tables, you can try this.
    http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/
    - Madan

  • Line item missing from FBL3N report

    Line item is missing from FBL3N report. I am selecting correct parameters for FBL3N report.
    The correct balance is shown in the FS10N report.
    I have checked the document, it is not reversed.
    Can anyone please tell me the reason for the same?

    HI ,
    If its related to 2009 and are you sure that you have selected fiscal year or date in which that document falls .
    Can you Do one thing Please go to Dynamic selection of FBL3N and put that document number in Document number field and then find out whether that documents  come or not .
    if it does then please look at posting date and GL accounts etc for that  and check the header data as well.
    May document is related to different company code .
    One more thing Please check when you run FS10N display line item can you see document there if you can then definatley you will be able to see .
    Please attached the screen shot of document with header data .
    Many Thanks
    Regards.

  • Plan cost line items for cost centers report

    Hello,
    I am displaying the report: Plan cost line items for cost centers and when I display the details of a line item it appears a document number, where could I display this document?
    I have tried to display it in FB03 transaction but it seems not to be this kind of document.
    On the other hand in the field Business transaction it appears RKP6, what is the meaning of this field?
    Thank you very much

    Hi Beatriz Amezua ,
    For displaying plan line items for cost center - KSBP and for display of individual plan document : KABP
    RKP6 means "Planning Activity Dependent Costs"
    Like in FI module, the business transaction have been codified and the list you can find in KANK transaction , mention your controlling area, menu -- Groups --  Display Groups
    Srikanth Munnaluri

  • Disable line item display in KE30 Reports

    Hi,
    Has any one tried disabling line item display in a KE30 Report? Which authorization object can be used to disable the access to line items?
    Thanks for your time.
    Regards,
    SAP_CO1

    Hi,
    When you create user-defined authorization objects for reporting, all their fields will be checked when you execute a report, even if they are not used in the report. It is not necessary to have all fields in the report definition, but you will need at least authorization ':' to get the aggregated figures.
    Example:
    Authorization object contains fields WW001, WW002
    Report uses field WW001 as drilldown characteristic, but not WW002.
    To execute the report, the user needs authorization '*' for field WW001 and ':' for WW002.
    If he does not have authorization for WW001 then he can execute KE30 but cannot drilldown to line items
    For more information how authorization checks for user-defined authorization objects work, you can refer to the IMG documentation via CO-PA -> Tools -> Authorization Management ->CO-PA specific Authorization objects -> Define authorization objects for the information system.
    You may use transaction SU24 in order to check the assignment of authorization objects to transaction KE30.
    regards
    Waman

  • FBL5N: missing one line item while viewing the report in spool

    Hi Experts,
    I 've got a problem while viewing FBL5N report in spool. The report is missing one line item, but when I
    execute it in foreground, the report was ok.
    Can somebody explain?
    TQ.

    Hello,
    It seems you should implement notes 1100728 and  1166251 !
    Best Regards,
    Glayds xing

  • Deleted line item appears in BI report

    Helllo Gurus,
    How can we take care of deleted line items or sales order in sap BI.
    One of teh user came up to me and said even though i delete the line item in ECC but i am able to see in BI report.I thought it has something to do with ROCANCEL Field.
    In addition to  that my flow is 3.5 and we are reporting on DSO.So can you suggest how to take care of it.
    Thanks in advance.,
    Regards,
    AL

    Hi,
    I have worked with similar scenarios and my understanding is that whenever a order line is deleted, delta comes properly through LO data sources.
    You are using 2LIS_11_VAITM which should have a ROCANCEL field which you will need to load delta properly specially in case of deleted records.
    In your DSO, add 0RECORDMODE info object and map it to ROCANCEL (you will have to add this object in your info source as well as you are using 3.5 flow).
    Now, you do not need to worry about anything, if a order line is deleted in ECC and you are doing a delta load using 2LIS_11_VAITM, you will get the deletion record and it will delete the record in your DSO (I should say ODS as you are using 3.5) also.
    The keys of your DSO must be Sales Order Number and Sales Order Line Item.
    As far as I remember, deletion record comes with a value of R in ROCANCEL and X is used for Before Image.
    Regards,
    Gaurav

  • GL/Cost element -line item based in the report

    Hi FI gurus
    Is it possible to drill down based on the GL account / cost element level -according to the project structure in
    the report painter report like - 12KST1D , 12KST1J .
    While using the report- need to display at each item level like project based network activity level.- could be the network can have one components or more and also cost based activity element.
    Kindly advise on the above requirement
    Thanks
    PP

    Hi FI gurus
    Is it possible to drill down based on the GL account / cost element level -according to the project structure in
    the report painter report like - 12KST1D , 12KST1J .
    While using the report- need to display at each item level like project based network activity level.- could be the network can have one components or more and also cost based activity element.
    Kindly advise on the above requirement
    Thanks
    PP

  • View the actual sales order (VA03, Display Mode) by double clicking on the Document Number of any line item displayed in the report.

       CLASS LCL_HANDLE_EVENTS DEFINITION.
      PUBLIC SECTION.
        METHODS:ON_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_SALV_EVENTS_TABLE
        IMPORTING ROW COLUMN.
    ENDCLASS. "lcl_handle_events DEFINITION
    DATA: EVENT_HANDLER TYPE REF TO LCL_HANDLE_EVENTS.
    *       CLASS lcl_handle_events IMPLEMENTATION
    CLASS LCL_HANDLE_EVENTS IMPLEMENTATION.
      METHOD ON_DOUBLE_CLICK.
        CASE COLUMN.
          WHEN C_VBELN.
            READ TABLE T_FINAL INTO WA_FINAL INDEX ROW.
            IF SY-SUBRC = 0.
              SET PARAMETER ID: C_AUN FIELD WA_FINAL-VBELN.
              CALL TRANSACTION C_VA03 AND SKIP FIRST SCREEN. "#EC CI_CALLTA
            ENDIF.
        ENDCASE.
      ENDMETHOD. "on_double_click
    ENDCLASS. "lcl_handle_events IMPLEMENTATION
    Is Something Wrong With The Code?

    If you are using ABAP for the report this will fulfill your requirement.
    Take a close look at the ZUSEREXIT program.
    When you execute it you enter the t-code e.g. VA01.
    It will display the enhancements available in VA01.
    Now you can click on the user exit name and you will
    automatically be transferred to SMOD t-code with the
    selected enhancement as a parameter.
    You can see in the below code how simple it is to implement this.
    You will not call SMOD but VA03 t-code on click.
    You can use this code to execute it in SE38 and see how it works.
    CODE STARTS BELOW:
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
              tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
        select single * from tadir where pgmid = 'R3TR'
                         and object = 'PROG'
                         and obj_name = tstc-pgmna.
        move : tadir-devclass to v_devclass.
           if sy-subrc ne 0.
              select single * from trdir where name = tstc-pgmna.
              if trdir-subc eq 'F'.
                 select single * from tfdir where pname = tstc-pgmna.
                 select single * from enlfdir where funcname =
                 tfdir-funcname.
                 select single * from tadir where pgmid = 'R3TR'
                                    and object = 'FUGR'
                                    and obj_name eq enlfdir-area.
                 move : tadir-devclass to v_devclass.
               endif.
            endif.
            select * from tadir into table jtab
                          where pgmid = 'R3TR'
                            and object = 'SMOD'
                            and devclass = v_devclass.
             select single * from tstct where sprsl eq sy-langu and
                                              tcode eq p_tcode.
             format color col_positive intensified off.
             write:/(19) 'Transakcija - ',
                  20(20) p_tcode,
                  45(50) tstct-ttext.
                         skip.
             if not jtab[] is initial.
                write:/(95) sy-uline.
                format color col_heading intensified on.
                write:/1 sy-vline,
                       2 'Naziv exita',
                      21 sy-vline ,
                      22 'Opis exita',
                      95 sy-vline.
                write:/(95) sy-uline.
                loop at jtab.
                   select single * from modsapt
                          where sprsl = sy-langu and
                                 name = jtab-obj_name.
                        format color col_normal intensified off.
                        write:/1 sy-vline,
                               2 jtab-obj_name hotspot on,
                              21 sy-vline ,
                              22 modsapt-modtext,
                              95 sy-vline.
                endloop.
                write:/(95) sy-uline.
                describe table jtab.
                skip.
                format color col_total intensified on.
                write:/ 'Broj exita:' , sy-tfill.
             else.
                format color col_negative intensified on.
                write:/(95) 'Nema user exita za ovu transakciju'.
             endif.
           else.
               format color col_negative intensified on.
               write:/(95) 'Transakcija ne postoji'.
           endif.
    at line-selection.
        get cursor field field1.
        check field1(4) eq 'JTAB'.
        set parameter id 'MON' field sy-lisel+1(10).
        call transaction 'SMOD' and skip first screen.

  • AR Transaction Data vs Line Item

    Hello,
    I have need to generate a report with some degree of detail and I am having an issue understanding the correlation between AR Transaction Data and Line Item.  In a report I would like to show sales for the period and AR balances and I need to be able to drill down on these (at Profit center level or Business Area Level both Characteristics have been added to the extractor and are being populated).
    How is Sales for Period derived in Transaction Data?  Can I create this same Key Figure at the Line Item Level?
    Any assistance is greatly appreciated.
    MK

    Sales are derived from the posting key used to post a AR document
    The posting key is either sales/turnover relevant or not
    As peopel use posting keys for all sorts of thingss- this is not the ideal solution to report Sales
    it also includes VAT
    ow ar eyou planning to add Profit Centre -?
    Conside the following document
    Dr Debtors £117.50
    Cr Reveneu Prfit centre 1  £50
    Cr reveneue Profit Centre 2  £50
    Cr VAT £17.50
    how are you going to get the profit centre onto the debtors postings?
    You can't... you can see the data in 0EC_PCA_4 or you can join Ar4 ODS to the GL ODS via an infoset

  • PO - Line Items Payment Status Report

    Hi Friends,
    Is it possible to get a PO (Line Items wise) Payment Status Report.
    My client wants PO Line wise payment status as a MM report development.
    We have Down Payment, Residual & Retention money as a business practise with our vendors
    Following is the MM-FI flow in our company code..
    Create & Release PR u2013 MM - Creating PR
    Create & Release PO (ME21N) u2013 MM u2013 Creating PO
    F-47 Down Payment Request u2013 MM u2013 Creating DPR
    F-48 Post Vendor Down Payment u2013 FI - Posting DPR
    FBZ5 Print Check for Payment Document u2013 FI - For printing cheques for DP only
    MIGO/ML81N, GR u2013 MM u2013 SES/GR for PO
    MIR7/MIR6 IR - MM/FI u2013 Parking & IR
    F-44 Clear Vendor u2013 Linking advance with IR (as residual clearing)
    F-53/F-58 u2013 Posting Payments after deducting Retention
    F-04 Post with Clearing u2013 Clearing Outgoing account entries with Main account
    Thanks in advance.
    Regards,
    Vikrant Sood
    Moderator: This thread has been locked due to crossposting.
                       Please do not post the same question in different forums.

    hi
    there is no sap standard report available you have to develop your z report.

  • In report painter report, line item level drilldown report requirment

    Dear All,
    I created one report in GRR1, when I execute the report i am not getting line item wise drilldown option. For example one cost center no of line itemwise posting ( g/ls wise)posting is there. By double clicking on that specific line item we will go that ledger and see the data available in that ledger.In standard reports that option available but my own reports I unable to go drilldown at ledger level cost reports.
    Please sugget anyone, where I am doing mistake in report creation level.
    Thanks
    M Srinivasa reddy
    Ph : 9637399076

    Thank you,
    I attached reports to Library based on that I am able to drilldown line item level of the report.Is it corret or any other way for line item level drilldown option for report painter reports
    Thanks
    M Srinivasa reddy

Maybe you are looking for