DST failed to fall back on Nov 4, 2007

Our java version is 1.4.2_04-b04. We installed the DST OS patches 109809-04 and 108993-54. We also installed the tzupdater-1_0_0.zip.
When we tested the starting DST, the system time jumped from 1:59 AM to 3 AM on March 11. This is correct.
But for the ending DST testing, the system time did not fall back to 1:00 AM from 1:59 AM on Nov. 4.
Are there anything wrong with the patches?
Chung
Message was edited by:
DST_Nov7_2007
Message was edited by:
DST_Nov7_2007

Hi,
Your updated JRE should fall back at 2am - not 1:59 am on sunday morning night Nov4th. Have your test program print off a few hourly values around that time. -

Similar Messages

MPV: hwdec=vaapi fails and falls back to software decoding

I've always been confused by setting up hardware decoding - but a couple of recent threads reminded me of this nagging issue and I took another shot at it. Yet despite all the claims that mpv should support vaapi, it is simply not working here. I've followed the instructions here yet mpv falls back to software decoding every time. I've been searching for related issues, but I can't seem to find any reports from intel graphics users.
The output from mpv:
$ mpv --vo=opengl --hwdec=vaapi video.mpg
Playing: video.mpg
[stream] Video (+) --vid=1 (mpeg1video)
[vo/opengl/x11] X11 error: GLXBadFBConfig
[vo/opengl] Could not create GL3 context. Retrying with legacy context.
Using software decoding.
VO: [opengl] 720x480 => 853x480 yuv420p
V: 00:00:00 / 00:00:32 (2%) Dropped: 1
Exiting... (Quit)
Mpv's man page suggests that vo=vaapi should only be used for old hardware, though it doesn't specify how old. I gave that a try too. That avoids the GLX error, yet still falls back to software decoding:
$ mpv --vo=vaapi --hwdec=vaapi video.mpg
Playing: video.mpg
[stream] Video (+) --vid=1 (mpeg1video)
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_37
libva info: va_openDriver() returns 0
Using software decoding.
VO: [vaapi] 720x480 => 853x480 yuv420p
V: 00:00:00 / 00:00:32 (1%)
Exiting... (Quit)
My hardware:
$ lspci -vnn | grep -i vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
I have all the drivers/packages listed on the intel graphics wiki page.
I must be missing something obvious here - the guides seem to suggest this should 'just work' yet mpv keeps falling back to software decoding.

I was hoping you'd chime in on this one Gusar. Thanks to both of your for the suggestions. So far no joy, though. I installed libva-intel-driver-g45-h264 and tried again and received identical output as in my initial post. I also tried xf86-video-intel-git which also gave no change.
To be clear, the video plays just fine, but it just relies on software decoding.
The output from vainfo from after the updates:
$ vainfo
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_37
libva info: va_openDriver() returns 0
vainfo: VA-API version: 0.37 (libva 1.5.0)
vainfo: Driver version: Intel i965 driver for Intel(R) GM45 Express Chipset - 1.5.0
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointVLD
VAProfileH264Main : VAEntrypointVLD
VAProfileH264High : VAEntrypointVLD
edit: for reference/comparison I removed the new packages and got the "pre" vainfo (then reinstalled the aur packages again):
$ vainfo
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/dri/i965_drv_video.so
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit
As I'm pretty ignorant about video drivers, I'm curious if there are some video files that just would not be able to be hardware-decoded? I've tried a small number of different videos and am getting the same results with all of them, but if there are video-file constraints, are there any sample/testing videos around I should use for debugging?
Last edited by Trilby (2015-01-26 20:59:33)

ISE admin , PSN and monitoring node fail-over and fall back scenario

Hi Experts,
I have question about ISE failover .
I have two ISE appliaces in two different location . I am trying to understand the fail-over scenario and fall-back scenario
I have gone through document as well however still not clear.
my Primary ISE server would have primary admin role , primary monitoring node and secondary ISE would have secondary admin and secondary monitoring role .
In case of primary ISE appliance failure , I will have to login into secondary ISE node and make admin role as primary but how about if primary ISE comes back ? what would be scenario ?
during the primary failure will there any impact with users for authentication ? as far as PSN is available from secondary , it should work ...right ?
and what is the actual method to promote the secondary ISE admin node to primary ? do i have to even manually make monitoring node role changes ?
will i have to reboot the secondary ISE after promoting admin role to primary ?

We have the same set up across an OTV link and have tested this scenario out multiple times. You don't have to do anything if communication is broken between the prim and secondary nodes. The secondary will automatically start authenticating devices that it is in contact with. If you promote the secondary to primary after the link is broke it will assume the primary role when the link is restored and force the former primary nodes to secondary.

TS3540 iTunes 11.0.4 (62) Fails to recognize iOS devices - Fall back to previous iTunes

Sometimes Apple releases an application that has a serious flaw in it like the new iTunes 11.0.4 (62) which is not recognizing iOS devices. There are over 56,000 users who have reported this in many threads on the Apple discussion support forum.
There needs to be an easy way in the MacOS (and iOS) to fall back to the previous revision of the software. Otherwise we can't trust the automatic updater which means we can use auto-update which means when new software comes out we'll wait for months to see if problems are reported before daring to upgrade which divides the Apple ecosystem and increases support loads on Apple which costs Apple's investor's money. All bad things.
I should be able to simply REVERT to the previous version of iTunes which worked perfectly fine.

This seems to have fixed the issue: on your desktop, hold down the [OPT] key and click on "Go" in the menu bar; holding down the [OPT] click on Library, find Preferences, and then delete all the files that start with "com.apple.itunes.XXXX.plist" where the "XXX" is whatever other things may exist - as long as they end in "plist". From my experience, preference files are rebuilt by the system after the next restart, so you have very little worry of losing any important data; the worst that could happen )and NOT in this instance, but for other plist files) is that you may have to reset the application "preferences" again when you next start it up, to act or appear in a "preferred" customized way for you.
Once you delete the .plist files, empty the Trash, and either log out or restart the computer. Once you're back up and operational, start iTunes and your iDevices should reappear in the sidebar (if that's open) and/or at the top of the screen (if that view is enabled).
Hope that helps. It definitely fixed my problem!

Hard drive failure message, and Short DST fail

Hello, and thanks
alright, this is the first time i have had this issue.
only thing on the computer that was changed recently was a windows update yesterday, it came up automatically, shut the computer down, and restarted automatically. Java has wanted to update for a couple days
if its worth anything, the error came up when i was watching instant streaming on netflix.
half a year old (maybe) Pavilion dm1
windows 7 64 bit
AMD E-350 precessor
product ID 00359-OEM-8992687-00010
gave me a warning message that hard disk drive failure was eminant, and adviced me to back up everything. computer seems to be functioning normal other than the error/warning message.
when i restarted the computer and ran the test that comes up i ended up with this, it says it may take over an hour, but this comes up after about a minute.
testing drive : 1
SMART Check: Passed
Short DST: Failed
Failure ID: 9LNF2M-5K55RT-MFH14J-60WA03
Product ID: XY961UA#ABA
Hard Disk 1
not sure where to go from here with it.
only other thing i have had happen with it is video driver crashes when i have a stale youtube video left in a tab. i assume that is unrelated, and i just trained myself to avoid that.
thanks! i appreciate the help.
matthew

Hello Frederic45.
You need to replace your hard drive. You should be able to purchase the parts on the notebook's HP Parts Surfer Page.
Had you previously created any Recovery Media such as a thumbdrive? Without this you'll be unable to reinstall the operating system when you replace your hard drive. You'll need to contact HP Support in order to get one of these kits. The number for US/Canadian customers is 1-800-474-6836. If you're in another part of the world you'll need to visit HP Support Worldwide to get your region's contact information.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Is it possible to only allow HD content when HDCP is present, otherwise fall back to SD?

For any of the proposed ideas here, you will have to package your content twice, where each stream would require its own license:
1 package for SD bitrates
1 package for HD bitrates
[ Try to play & react if necessary ]
When the user wants to play HD content, attempt to do a license acquisition for the HD stream. If it fails with an error code indicating that the device doesn't not have the needed output protection requirements (DRMErrorEvent 3338 – 3342), the client would then fall back and play the SD stream, which would trigger a license acquisition of a license that doesn't require Output Protection enabled.
[ License Preview ]
When the user wants to play content, perform a "License Preview" of the HD stream to determine if the license can be consumed & enforced by the device (DRMManager.loadPreviewVoucher()). If the result of loading this Preview license fails with a DRM Error event around Output Protection requirements (#3338-3342), then play the SD stream.
[ Leverage an existing front-load license request that you're using to preemptively initialize the DRM system ]
This is similar to "License Preview", but attempts to front-load that check and retain the result for later use.
In our whitepaper to optimize "start to playback" experience (http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/video/pdfs/start-to-p layback-adobe-access.pdf), one of the things we recommended was to front-load a license acquisition on a non-existent content very early in the user workflow (Optimization #2). Doing this would initialize the DRM system so that when the real license acquisition happened later on, Adobe Access would already be primed.
To take this a step further, if you have this in place, since you already are doing a license acquisition ahead of time, you could use a policy that requires Output Protection. In your client, when it attempts to acquire a license, it can record whether or not the operation was successful. If it was successful, the client could have logic to show HD content options to the viewer. If the acquisition was unsuccessful, then the client could restrict viewing to only the SD content.

ok great thats what i thought
How do I check if I am running moutain lion
about this mack gives me Mac OS X
Version 10.7.5
I am running Software UPdate as I type
assuming that I have Moutain Lion how do I link the two ecternal HD's ?

Hard Disk Short DST: FAILED Failure ID: MC05BK-6KP7H9-MFPWW1-60VN03

Hard Disk can't be read anymore.
Failure ID: MC05BK-6KP7H9-MFPWW1-60VN03
What does this ID exactly mean?
I know so far that the hard disk has to be replaced. But as usual there is unsaved data to be rescued ...
One year warranty by HP has expired but there still ist two years German "Gewährleistung"
Some more informations:
Error "3F1"
HP PC Hardware Diagnostics UEFI 4.3.3.0
HP Hard Disk Test
Testing Drive: 1
Hard Disk SMART Check: PASSED
Hard Disk Short DST: FAILED
Hard Disk Test: FAILED
Failure ID: MC05BK-6KP7H9-MFPWW1-60VN03
Product ID: D6Y76EA#ABD (HP Pavilion g7-2306sg Notebook)
BIOS F.23 (12/27/2012)
HDD:
Modell: ST500LM012 HN-M500MBB
Firmware: 2AR10002
MS Windows 8.1 (64-bit)

Whenever the Hard Disk Short DST test fails with a 24 Digit Error Code "MC05BK-6KP7H9-MFPWW1-60VN03" that indicates that the Hard Disk Drive has failed and that requires a replacement to resolve the issue
This issue could be due to Application or driver conflicts, virus issues, file corruptions due to incompatible applications, improper shutdowns, update failures due to conflicts, sudden power surges, if notebook is dropped etc..
HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby
Please make sure you are getting at least equal capacity as the original one in order to use Recovery Disks. If you need you can buy a larger, but not smaller capacity Hard Disk Drive. For example if you have a 500GB Hard Disk Drive you can upgrade it to 750GB Hard Disk Drive but not 320GB Hard Disk Drive
Please try the below shown troubleshooting steps once:
Step 01. Remove the battery and unplug the AC/Power Adapter
Step 02. Press and hold the Power button for more than 30 Seconds
Step 03. Plug in the AC/Power Adapter (leave the Battery out for now)
Step 04. Press the Power button and check if the Unit works normal
If the above mentioned steps does not help, then you can try reseating the Hard Drive on your Notebook
If the issue persists again please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media)
Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files. You can also refer to the below shown link for further support
http://www.wikihow.com/Recover-Data-from-the-Hard-Drive-of-a-Dead-Laptop
Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :
http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf
You can Check your warranty Here to verify the status and Click Here to order a new Hard Drive
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

HP Pavilion g6-2230ew Start-Up Test and Hard Disk Short DST: Failed

Hello community,
As you can see, my notebook model is HP Pavilion g6-2230ew.
I bought it one year ago, and it keeps freezing and hangs for about few months.
I've searched what i could do and I did a Start-Up Test to check if its the hard disk problem.
The result was that everything passed, but hard disk short DST failed.
I saw replies for similiar problem with other HP notebooks and solution was a new hard disk.
My warranty is still actual, but I want to ask if there is any other solution than exchanging my hard disk, and if that's what I should do - how long I would have to wait for such service.
Looking for reply.

Well the hard drive has to be replaced and it sounds like it is overdue. The ordinary means to do that under warranty is to send the laptop to a Service Center. We have heard that, sometimes, when the moon is full and the Call Center rep is in a good mood, they will send you a hard drive, charge your credit card 2 or 3 times what it is worth at retail and refund when you return the defective drive. But that is purely a matter of grace and they do not have to do that. Turn around time varies all over the map from 3 working days to a couple weeks or more and there is no way to predict. A hard drive replacement should fall at the low end of that range since they should always have hard drives for replacement and it is a very easy fix.
On hard drive replacement under warranty, given that a new hard drive is well less than $100, I might be tempted not to lose 4 or 5 days' use of my laptop and come out of pocket myself but that's me and your cost/benefit analysis could be different and likely is.
They will return it to you restored to factory specs and will make no effort to preserve any of your data. When I do send them in for repair I always try to image the drive, if it is not too dead.

I get a "Short DST" failed error when running test. Laptop will not boot up. Any ideas?

I get a Short DST failed error when I ran a test. The laptop won't bootup. All I get is a black screen

Hi,
Certainly, the error code will be a Smart or Disk Self Test failure - in either case, it would indicate that the Hard Drive is failing and needs to be replaced. This is also consistent with the start-up issue.
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your existing files.

AP Fall back issue for WLC

Hi,
i have two WLC 4402 with same ios 4.2.99.0
& configured fail over based on below link
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml#c5
AP failover occurred but the fall back option like primary WLC comes up it does not register with primary all the ap still in secondary. I enable Fall back option also as per the document.
could you guide me how i can troubleshoot this issue..
Thanks..

hi,
the meaning is the secondary WLC is not realsing the IP's for client eventhough the SSId match with extract DHCP scope. DHCP scope is not overlap...
Important.
Primary box is new one with 4.2.99 but the old box had 4.1.x b4 the failover the old box was working & released the DHCP scope for the client. Once we upgraded the old box with 4.2.99 (Failover we need to have both the box with same version) even it is not releasing the DHCP scope if i used as standalone device also.
My doubt is
1. New box if i used as a stand alone it is releasing the DHCP scope for the client
2. Both the new & old box has the same configuration
3. If i used old box as a stand alone device why it is not releasing the DHCP scope (with the same IOS & configuration working perfectly on new box)
4. This issue occured after upgrade the IOS on old box.
Can anyone help me out at earliest.
Thanks

AS5400 IP fall back routing without Call Manager

Hi guys
my system is using AS5400+SLT+PGW, but without call manager.so i guess i have limited functions of Cisco voip, but so far all is well
my question is:
how can i do IP fall back routing to the same destination, with 2 target IPs.lets say my destination with 2 target IP1:192.168.1.1 and IP2:192.168.1.2
primary IP is 1.1 and is in dial-peer 1
calls will be sent via dial-peer 1.
in the event of IP1 fail, how can IP2 will take over as the new primary target?
and when IP1 back to service, it will re route backt to IP1
came across of using dial-preference, but not sure how it works and if it fits my scenario
currently , just pointing to IP1.dont have IP2 configured anywhere.and the only fall-back routing i have now is frm my PSTN switch (which is different frm IP switches)
thanks in advance
brendan

Brendan,
Use preference command under dial peers.
dial-peer voice 1 voip
preference 0 (default)
session target ipv4:
dial-peer voice 2 voip
preference 1 (lower priority)
session target ipv4:
HTH
Sankar
PS: please remember to rate posts!

How to stop Gdm & fall back in console to edit the Gdm-login settings.

Unfortunately, I didnt configure, Gdm-user-login settings and started Gdm to play.
Now, Gdm prompts to login, but i cant, login with the username or as root.
so please somebody reply , how to stop Gdm & fall back in console to edit the Gdm-user-login settings.

ewaller wrote:Well, if I catch you before you waste your time, try rebooting, edit the kernel command line in grub and add '3' at the end.
Or boot from your install media, mount / at /mnt, and edit your /etc/inittab or /etc/rc.conf, depending on how you are staring GDM.
Grub bootloader failed to be installed on my system. so i have installed Syslinux. And in Syslinux, i did'nt find any option to edit.
However, i have re-installed Arch and now Arch-gnome up & running.

Online banking statement and credit card statements will not display in FF 4.0 on either Win 7 or XP. Falling back to 3.6 fixes problem on both computers and sites.

After upgrading to FF 4.0 I am not able to access or display my bank statements or credit card statements. I have a laptop running Win 7 and a desktop running Win XP and have same problem on both. Statements are in Adobe PDF. Upgraded Adobe to vers. 10 at banks suggestion but did not help. I have now fallen back to FF 3.6 on both PC's, and it now works on both PC's, one running Adobe Reader 9 and the other running Adobe 10.
Additionally, my email provider (bbwi.net) "Squirrel Mail" times out and logs me off every 15 minutes or so in FF 4.0, even when I am actively composing mail. Falling back to FF 3.6 also fixed this problem

1st, you will not be able to activate your PPro1.5 on ANY new computer, see next link for the special version you MUST use
CS2 (and earlier) Activation Server http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
2nd, you already mentioned Virtual XP, so if a direct install doesn't work, that would be the way to go... or, to just do what SHOULD work from the start, just do Virtual XP

Error when installing Lion on empy HD: "Couldn't find app store version, falling back to hardcoded"

I've run in to a problem that is making me tear the hair from my head. I'm hoping for your help!
Short story:
I'm trying to install OS X Lion on my 27" iMac.
I've erased the HD using Disc Tool in recovery.
HD shows no errors.
I've tried Internet Recovery (it loads up, but wont start the installation)
I've tried creating a recovery usb on another similar iMac, and use it on this. Same error, only differance is it keeps "loading" when installing, but nothing happens. Same error in log.
When I try to start the Reinstall I get an error in the installation log that goes something like this:
Install Mac OS X Lion[354:9c03] Couldn't find app store version, falling back to hardcoded
Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Apple Care suggested:
Trying another network (doesn't work).
Install with the original Snow Leopard DVD first, then upgrade (can't do that, the DVD is lost and a DVD from another friend is not working)
What can I do to get around this error?
Someone suggested buying a usb with Snow Leopard from the apple store. Do I really have to buy a NEW operating system because the recovery doesn't work? Would I have to pay to upgrade to Lion again?

Follow AppleCare's instructions on re-installing Snow Leopard and re-installing Lion. Your friends disc won't work because the discs are machine specific. You will have to get a replacement set of your original Install Discs from AppleCare for a nominal cost.

Upgraded to 6.0.2, IBM Lotus Notes doesn't work correctly. Can I fall back to a previous FireFox?

I've been using previous versions of FireFox for years on XP machines. Recently bought a Win-7 machine and upgraded both to FF 6.0.2. I can't get scroll bars on the side when using my company's IBM Lotus Domino. I've had to drop back to IE, which I do not like. Is there some way to fall back to an earlier version of FF? The site with the problem requires UID/PW to login, so I can't show you the problem I'm experiencing.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file
See also:
*http://kb.mozillazine.org/Lost_bookmarks
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
*http://kb.mozillazine.org/Profile_backup

DST failed to fall back on Nov 4, 2007

Similar Messages

Maybe you are looking for