DTP: How to load a specific request?

I have created a DTP between two InfoCube objects. I would like to perform full loads of only a few selected requests from the source InfoCube.
I couldn't find the request number field in the DTP filter list. How can I accomplish my requirement?
Thank you for your time.

You cannot send request vise data.
Experts correct me if I am wrong.
Message was edited by:
Jr Roberto

Similar Messages

How to load a selective request from PSA to DSO using DTP?

Hi Gurus,
The PSA is having 3 requests, how to load the request number 2 from psa to DSO using DTP?
Thanks
SDP
Edited by: SDPSAP on Nov 15, 2011 7:58 PM

Let us say that requests are 1,2 and 3. 1 being the first one and 3 is the last one. Now you need to load request 2 in DSO from PSA.
- create a Delta DTP
- Tick "Only Get Delta Once"
- Tick "Get One Request Only"
- Untick "Reterive Until No More New Data"
- execute the DTP, it will load request 1 to DSO
- delete this request from DTP
- execute DTP again, it will load request 2 to DSO; this is what you need.
If DSO is write optimized, you do not need to untick "Reterive Until no More New Data"; just execute the DTP, it will create 3 requests in DSO, delete first and last and you will get only 2 in DSO.
I hope it helps.
Regards,
Gaurav

How to load a specific set of classes at runtime.

Howdy!
I want to load all the classes in a directory that implement a specific Interface, at runtime. Of course i can load all the classes if i know the String name.
Class t = Class.forName(ruleClass);
     cnst = t.getConstructor( new Class[] { Session.class } );
     try {
         Object obj = cnst.newInstance(new Object[] {
                                          m_fwkSession });
         IRules rule = (IRules)obj;
            ...................where IRule is an interface.
How do i get all the files in that directory and find the classes implementing that interfaces ?

You can either load all the classes and then test if they are assignable from IRule.class (isAssignableFrom())
(you could use a custom classloader if you wanted these classes to be garbage collected)
or
Open the class files and scan them to see if they contain
"myPackage/IRule"
(maybe you would have to parse the .class file, but just scanning it might be good enough)

How to delete a specific request from ODS

Hi all,
We have an ODS which we're loading invoices from legacy system. In legacy system, there are two tables for invoices. First one is daily records which is archived on last day of each month. As you guess, second table is for archive records. We need all of the records from both tables. Because of performance issue , we don't want to load both tables everyday . So we created two transformation. Since there is no delta option, we need to delete the first table request from data targets before extraction. And delete the request from the second table only last day of month. We're created process chain. But there is no option for deleting only the request from a specific data source or transformation. Are there any solution for this?
thanks,
Yigit

Hi,
Thanks for your code. But is there any function module to delete most recent request from the ODS.
I had 2 requirements...One in need to delete from ODS & Other one from Cube.
FM - 'RSSM_DELETE_REQUEST' will be used to delete from Cube only.
Can please you send FM & ABAP Code to delete request from ODS.
Thanks in advance.
Yigit
Message was edited by:
Yigit

How to delete a specific request out of the InfoProvider

Hi all,
we have a generic datasource to extract our CO-PA data. Unfortunately this datasource can not deliver any delta at the moment. This is why we need to have a full upload. In InfoPackage we select the single period 001, 002, or 003.
Now in March we only need to load the period 003 daily. In my process chain I would like to have a function that deletes only the request of this infopackage and not also the requests of the previous months, so I don't need to load all everyday, but only the current month.
Do you know such a process type?
Thanks in advance!

Hi Sandra,
1. Try "Delete Overlapping Requests from InfoCube" process type.
2. You can also do this in the InfoPackage. Goto Data Targets tab "Automatic Loading of Similar/Identical Requests"
These two are only possible for a Cube.
Anup.

How to load a specific view in a browser

Hi Guys,
In my application, I hav 3 views..I need to set particular view at window level..So How can I do that..Thanks in advance

Good day,
Please check my reply in the following thread.
Re: Change of default view in a web dynpro window
Regards and Best wishes.

How to delete cube old request by using abap code?

Dear experts,
Here is one thing need your help:
We have one cube need to delete the old request. This cube is loaded daily and only need to delete the request of that month.
I know there is one "Delete Overlap Requet" type in the process chain, but my concern is: in our DTP filter, different day the selection will have different values, let's say A and B, and A and B are not even overlap at all.
So my question is:
1. Can I still use "Delete Overlap Request" to delete the old request?
2. If so, I see it can be implemented by abap routine, can anyone give me some sample code? Like how to delete request only in this month. And how to delete request whose selection is equal to a specific value.
Note: one of the source cube is real time cube so can not delete the request from infopackage.
Any post will be appreciated and thank you all for your time in advance!
Regards.
Tim

Here is the intial code when I choose "Request Selection through Routine", please help me on how to choose the specific request and delete them in this routine.
program conversion_routine.
Type pools used by conversion program
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
    InfoCube        = ZPC_DEL_REQ_ZBPS_C01
form compute_ZPC_DEL_REQ_ZBPS_C01
tables l_t_request_to_delete structure rsreqdelstruc
using l_request like rsreqdone-rnr
changing p_subrc like sy-subrc.
*Insert Source Code to decide if requests should be deleted.
*All Requests in table l_t_request_to_delete will be deleted
*from Infocube ZPC_DEL_REQ_ZBPS_C01.
*Add new requests if you want to delete more (from this cube).
*Remove requests you did not want to be deleted.
$$ begin of routine - insert your code only below this line        -
     loop at l_t_request_to_delete.
     endloop.
     clear p_subrc.
$$ end of routine - insert your code only before this line         -
endform.

How to load the exist Data Mart Request in to cube.

Hi Friends,
I have a scenario... i got DSO and one Cube , iam loading the data from DSO to Cube .
The number of records are more in the DSO and due to some clculation in the routine i need to load the data year by year(i got 2007 and 2008 year daya). I have loaded the 2007 data to the Infocube and in the DSO i can see the Data Mart Symbal against the Request Id when th load is finished successfully.
When iam trying to load the 2008 data from DSO to Cube iam getting the "0" records. I realised that the Data Mart symbal is exist in the DSO.
How to load the 2008 data in this scenario. If i delete the data mart sysbel means iam deleting the Cube request.
Can any have an idea on this.
Thaks in advance.

HI,
Things are not clear.
How is loading happening if its delta or full load through DTP or you using 3.5 flow??
In any cases if you do a full load or full repair based on the year selection it should pick the records from the source...there is nothing to do with the data mart status in the case of full loads.
Data mart status will come into picture only when you schedule the delta loads.
Do a full load based on selections on year from the DSO to the cube...no need to delete the data mart or it will bring that request again delta is scheduled...does that request in DSO contains the data for 2008 only ...if yes then you can just delete the data mart status for that and do a delta...if not then do full loads as said.
Thanks
Ajeet

Self Load into infocube of a specific request

Hi all
I have to do a self load on a infocube, Can do load only for specific request?
For ex: Infocube->Manage->Requests I see 4 Requests, can I pick only one request out of those 4 and do a self load into infocube for that one request?

Hi,
Please do a fetched run in the DTP(i hope the option will get enabled for delta DTP) and reset the datamart status only for that particular request in the source which you need to load. Try loading it again?
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
Regards,
Syed
Edited by: shameer83in on Dec 2, 2011 7:56 AM

How to load data from PSA to CUBE & DSO at a time using DTP in BI 7 ?

HI all,
I am new to BI 7 . How to load the data at same time to DSO & INFO CUBE using DTP.
Please provide me steps to load & plz specify which update mode I have to use ( FULL OR DELTA ) which one is best.
Plz Suggest me.
Thanks & Regards,
Kiran m.
Message was edited by:
kiran manyam

Below are the basic steps which we follow in any BI 2004S system:
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
If you are loading data from one one data target to other, no need to use PSA, you can directly execute DTP in that case.
Data Source -> Transformation (IP/DTP) -> Data Target1 -> DTP ->Data Target 2
Use the below link for detailed example:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
Infosources are no more mandatory with BI 7.0, below is the link to scenarios where we use infosources:
http://help.sap.com/saphelp_nw04s/helpdata/en/44/0243dd8ae1603ae10000000a1553f6/content.htm
Full or delta depends on your requirement...
chk the below thread to know better
difference between the various loads
hope it helps
Message was edited by:
sriram viswanathan

How to load data from a ODS to CUBE Request ID - by - Request ID?

<i>How to load data from a ODS to CUBE Request ID - by - Request ID?</i>
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "<b>data mart status of request</b>" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.

Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley.

Delta Init DTP DSO- Cube loads all requests

Hi,
i've loaded several Full Request to a DSO (Datasource 2LIS_02_ITM).
I had to to fragment it to 3 months per Full load because otherwise the data volume was too much for the rollback segment.
Now i want to load these requests from the DSO to a Cube.
I created a Delta DTP and selected the "All new data by request" option.
The DTP starts as a Delta Init but selects all open requests at once and crashes with a "ORA-01555: snapshot too old..." error.
As a workaround i created several Full DTPs that only load part of the data but i really want to understand why the Delta Init doesn't work as expected and documented (to load request by request in a new process).
thanks
Carsten

Hemant Khemani wrote:>
> Please check if you have selected the option "Get All New Data Request by Request" in the Delta DTP.
> If you have selected this option then the delta DTP will select only one request (oldest - yet to be updated to the target) from the DSO.
That's the option i've selected.
When monitoring the DTP-Request i see in the head data that all requests from the DSO are selected at once.

How to load hierrarchies using dtp using flat file in bw ineed clear ste

how to load hierrarchies using dtp using flat file in bw ineed clear steps

Hi,
If you want to load InfoObjects in the form of hierarchies, you have to activate the indicator with hierarchies for each of the relevant InfoObjects in the InfoObject maintenance. If necessary, you need to specify whether the whole hierarchy or the hierarchy structure is to be time-dependent, whether the hierarchy can contain intervals, whether additional node attributes are allowed (only when loading using a PSA), and which characteristics are allowed.
1.Defining the source system from which you want to load data:
Choose Source System Tree ® Root (Source System) ® Context menu (Right Mouse Button) ® Create.
For a flat file, choose: File System, Manual Metadata; Data via File Interface.
2.Defining the InfoSource for which you want to load data:
Optional: Choose InfoSource Tree ®Root (InfoSources) ® Context Menu (Right Mouse Button) ® Create Application Component.
Choose InfoSource Tree ® Your Application Component ® Context Menu (Right Mouse Button) ® Create InfoSource ® Direct Update
Choose an InfoObject from the proposal list, and specify a name and a description.
3.Assigning the source system to the InfoSource
Choose InfoSource tree ® Your Application Component ® One of your InfoSources ® Context Menu (Right Mouse Button) ® Assign Source System. You are taken automatically to the transfer structure maintenance.
The system automatically generates DataSources for the three different data types to which you can load data.
      Attributes
      Texts
      Hierarchies (if the InfoObject has access to hierarchies)
The system automatically generates the transfer structure, the transfer rules, and the communication structure (for attributes and texts).
4.Maintaining the transfer structure / transfer rules
Choose the DataSource to be able to upload hierarchies.
Idoc transfer method: The system automatically generates a proposal for the DataSource and the transfer structure. This consists of an entry for the InfoObject, for which hierarchies are loaded. With this transfer method, during loading, the structure is converted to the structure of the PSA, which affects performance.
PSA transfer method: The transfer methods and the communication structure are also generated here.
5.Maintaining the hierarchy:
Choose Hierarchy Maintenance, and specify a technical name and a description of the hierarchy.
PSA Transfer Method: You have the option here to set the Remove Leaf Value and Node InfoObjects indicator. As a result, characteristic values are not transferred into the hierarchy fields NODENAME, LEAFFROM and LEAFTO as is normally the case, but in their own transfer structure fields. This option allows you to load characteristic values having a length greater than 32 characters.
Characteristic values with a length > 32 can be loaded into the PSA, but they cannot be updated in characteristics that have a length >32.
The node names for pure text nodes remain restricted to 32 characters in the hierarchy (0HIER_NODE characteristic).
The system automatically generates a table with the following hierarchy format (for sorted hierarchies without removed leaf values and node InfoObjects):
Description
Field Name
Length
Type
Node ID
NODEID
8
NUMC
InfoObject name
INFOOBJECT
30
CHAR
Node name
NODENAME
32
CHAR
Catalog ID
LINK
1
CHAR
Parent node
PARENTID
8
NUMC
First subnode
CHILDID
8
NUMC
Next adjacent node
NEXTID
8
NUMC
Language key
LANGU
1
CHAR
Description - short
TXTSH
20
CHAR
Description - medium
TXTMD
40
CHAR
Description- long
TXTLG
60
CHAR
The system transfers the settings for the intervals and for time-dependency from the InfoObject maintenance. Depending on which settings you have defined in the InfoObject maintenance, further table fields can be generated from the system.
The valid from and valid to field is filled if you select Total Hierarchy Time-dependent in the InfoObject maintenance. The time-dependent indicator is activated if you select the Hierarchy Nodes Time-dependent option in the InfoObject maintenance.
6.Save your entries.
Depending on which settings you defined in the InfoObject maintenance, additional fields can be generated from the system. Also note the detailed description for Structure of a Flat Hierarchy File for Loading via an IDoc and for Structure of a Flat Hierarchy File for Loading via a PSA.
Also find the below blog for your reference...
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
You can load hierarchy using process chain...
Find the below step by step procedure to load hierarchy using process chain...
http://help.sap.com/saphelp_nw70/helpdata/EN/3d/320e3d89195c59e10000000a114084/frameset.htm
Assign points if this helps u...
Regards,
KK.
Edited by: koundinya karanam on Apr 8, 2008 1:08 PM
Edited by: koundinya karanam on Apr 8, 2008 1:09 PM

How to load specific driver for specific device not having PnP-ID?

Hello,
as mentoined in a previous post I'm up to adapt an exisiting PCMCIA-based PC Card driver so that it can be used with a PCMCIA/USB adaptor (by using it's driver's IOCTLs), and already had
some success on it: My driver loads and I can read files (for example, in Windows Explorer) from the card as it did before in "PCMCIA version" (I intend to support both with the same driver, which seems
to work at the moment). As it did before, the driver currently creates a MTD (memory technology device). My main "problem" is how to load the driver.
The situation is a bit complicated, I try to give as much details as possible.
For better understanding
The PCMCIA/USB adaptor's driver usually has following device stack: PCMCIA/SUB adaptors driver -> USB mass storage device (USBSTOR.SYS) -> Diskdrive (DISK.SYS [->PARTMGR.SYS]). For more ease - to see if my driver works in general - I installed my driver
via INF using the PnP ID of the "USB mass storage device", with other words I "replaced" the USB mass storage driver with my own driver.
This is my problem
This means - and that is currently my problem - that may driver gets loaded regardless of what is attached to the PCMCIA/USB adaptor. Usually, when attached to PCMCIA, the PC card has a PnP ID the driver can be assigned to. In my case, I have no PnP ID for
the PC card, and the driver may stop because the attached device is not supported The driver will unload properly, but the device remains with error code (in device manager).
What I want to avoid
I already thought about filter drivers between USBSTOR and the PCMCIA/USB adaptor's driver (#1), or above the USB mass storage device (#2). If I'm correct, that means that I have to handle URB/CBW requests for case #1 or at least SCSI requests for case #2 -
but I'm currently not familiar with filter drivers, URB/CBW and/or SCSI. Porting the driver was quiete frustating until yet and I had to get familiar with a couple of technologies that belongs to the driver's functinaliy itselfs -
I hope you understand that I want to avoid getting familiar with more technologies than required.
I think there must be a way to check the device (PC card) at the PCMCIA/USB adaptor
before my driver will be loaded, as well as removing the deivce completely if the PC card was removed (so that it disappears in device manager). But I'm currently have no idea how to do that. Is it possible to
load my driver along the device/driver stack usually created by the PCMCIA/USB adaptor's driver?
Some answerers likes to refer to WDK documentation and samples. In such case - because of their complexity, it would be nice to get a hint about where to start.
Have much thanks in before for any suggestions!
Regards,
Willi K.

Today's memory cards (like CFC) manage their FTL (flash translation layer) in their firmware. Our PC card is quiete old technology and does not have such firmware, this is why Windows cannot recognize the file system (FAT). For example, a request to offset
0 may be somewhere else on our PC Card.
I followed your suggestion and used the HWID of device that appears "above" the USB mass storage device, and my driver seems to work as it did before - OK, made no difference.
But if my driver does not recognize the card (because it is not present or it is another PCMCIA device -> STATUS_NOT_SUPPORTED or STATUS_NO_MEDIA in driver entry), and the device is shown with exclamation mark in device manager.
Two questions remain:
- How can I ensure that other drivers may attach if my driver does not support the device inserted in the adapter?
- How can I force a "re-check" of my driver if there was no card present when driver was loaded?? -> Note: A disk drive always appears in device manager - regardless if a device is attached to the apator or not

Can I load a specific camera/lens profile into LR and if so how?

Can I load a specific camera/lens profile into LR and if so how?

If the camera profile or lens profile is in a Lightroom compatible format (i.e. created by the DNG Profile Editor or Lens Profile Creator) then you can load the profile into LR by putting it into the following folder and restarting LR.
Windows Vista or 7—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.

DTP: How to load a specific request?

Similar Messages

Maybe you are looking for