Dual Ethernet Ports, and Air Port Wifi

I have a early 2008 and 2009 Mac Pro and was wondering if there was a way to connect both ethernet ports and the airport wifi as one "adress" so i would essentially have 3x the bandwith for downloading/uploading, etc.
This is in both Snow Leopard and Win XP Via Boot Camp

You might start by reviewing this thread and associated links:
http://www.insanelymac.com/forum/index.php?showtopic=57382.
Apparently it should be possible to link the ethernet ports together but not the wireless.

Similar Messages

  • Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet.

    Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks

    I did not say it is not possible.
    I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
    Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
    Maybe you can get on the Internet over Ethernet.
    You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac).

  • What are the dashed  line in air port express and air port extrem

    what are the dashed line in  air port express and air port Extrem

    The dashed line represents a wireless connection between the base stations.

  • "in port" and "out port" VIs are not in the functions palette!

    Hi,
    I am using LabVIEW 2012 on a Win 7 64 bit. I want to read a digital input (3.5V) using PC parallel port. I also read this white paper:
    http://digital.ni.com/public.nsf/allkb/B937AC4D8664E37886257206000551CB
    I searched all the functions palette for “in port” and “out port” VIs but I could not find them. Apparently they are not supported in 64bit OS. What are my alternatives for reading digital input via PC parallel port?
    Thanks.

    They have not been supported for quite some time. What happens when you use the recommended VISA api?

  • How to revert p4 port and telnet port from 50204 to default?

    Hi,
    i changed the p4 port and telenet port to 50204 using Visual Administrator. Now Visual Administrator and the J2EE server are both down. Is there some way I could revert back my ports to the default ports?
    Also, my J2EE dispatcher process is down with an exit code of -11113. Could someone let me know how to change the port settings for telnet and p4 please?

    Hi,
    You can do this through "ConfigTool". It is a offline tool and comes handy when JAVA system is down. It requires only database up.
    Start configtool.ba from the directory "<Drive>:\usr\sap\<SID>/JC01\j2ee\configtool.
    Then select the node Cluster Data->Instance_<No.>->Dispatcher_ID<No.>->
    1). P4->Local Properties
    In the port you have to mention 5<instance no.>04
    if you instance number is 01 then it should be 50104
    2). telnet->Local Properties
    in the port you have to mention 5<instance no.>08
    if your instance number is 01 then you have to mention 50108.
    Then try to restart the JAVA system.
    Best regards,
    sheo

  • Can I use "accesshw.zip" to make the in port and out port VIs work (for NT) for Labview 6.0.2.

    I am trying to write to the parallel port using labview 6.0.2 (vi attatched). It does not seem to be working with NT though it does with Win 98.
    The information about the software (accesshw.zip)mentions versions 4.x and 5.x only.
    Please refer to the link given below:
    http://zone.ni.com/devzone/explprog.nsf/6c163603265406328625682a006ed37d/49664743ded6f1da862564bc004e3a7f?OpenDocument
    thanks.
    Pari.

    Hi Rob,
    I cannot completely agree..... Please find attached a
    accesshw_lv6.llb. Originally it was made for LV5; now in LV6-version) This .llb contains accesshw-files for use under NT & W2k. These files work, if you store them (!! including the sub.vi's !!) into: C:\Program Files\National Instruments\LabVIEW 6\vi.lib\platform\system.llb (this should be the typical path). The "old" In Port and Out Port vi's have to be substituted. Find in addition a simple test-program for use with scope in order to test
    the execution speed / toggeling of bits.....see the scope-picture copied into diagram. In addition I strictly recommend the use of buffer-circuits in order not to destroy the mainboard-IC's by accident. If somebody needs schematics or programs rela
    ted to parallel port - example see jpeg-file please mail to: [email protected]
    regards
    wha
    Attachments:
    accesshw_lv6.llb ‏171 KB
    printer_port_test.llb ‏135 KB
    8255_diagram.jpg ‏186 KB

  • Cisco 5 port and 8 port gigabit unmanaged switches

    I am looking for 5 port and 8 port gigabit unmanaged switches in Cisco. Please provide the BoM for the same. As per my understanding the following switches can suffice the requirement (SG100D-05 and SG100D-080) however I am not sure about the DC power, whether they can be used in normal AC environments.
     

    The SG100D-05 and SG100D-08 are too small and their power requirements are too low to justify building an AC power supply into them like the larger SGx00 switches have, so they are wired to accept DC power and use an external power adapter (included) for connection to an AC environment.
    There are really no optional components to these devices, so the BOM would be as follows:
    5-port SG100D swich: SG100D-05
    8-port SG100D swich: SG100D-08

  • Diff between the J2ee port,webdispatcher port and ICM port

    HI All,
    Can some one please explain the diff between the web dispatcher port and J2ee port, I am able to under stand the diff between the web dispatcher port and the ICM port. What I understood is that all the requests will be passed to ICM through the web dispatcher , but what is the j2ee port refers ?
    Thanks & Regard
    Rajesh Meda

    Hi Rajesh,
    The Webdispatcher,ICM servers as services to reach the ABAP and Java stack respectively. ICM is thread oriented.
    Any communication flows through Webdispatcher ---> ICM ---> ABAP/Java Stack.
    Every instance has a ICM process in it. Webdispatcher is mainly used for load balancing and to be placed in DMZ zone for more protection of the communication channel. All the communication happens via port . Each of the service can be reached by independent ports or via Webdispatcher>ICM> J2ee.
    Like direct port for J2ee we also have direct port for ABAP message server.
    Hope this clarrifies. Kindly let me know in case of further queries.

  • Apple tv and air port?

    do i need apple tv if i have air port and my new tv can connect to the internet?

    Network person here.... the apple tv box, wireless router and my laptop ( on same wireless network ) are all connected.   The Apple TV and my Laptop both getting ip from wireless router thru DHCP and both showing the same network mask of 192.168.0.    .129 for apple tv and .130 for Laptop... sub 255/24 with a Gateway of 192.168.0.254, but, I can't ping apple tv from laptop?  No ports are blocked and my firewall/antiv on  laptop are both off.  Wondering, Sue has an apple router at home and this unit works there.  When we hardwire the apple tv into the wireless router here it connects and pings just fine,  Only difference left is the Wireless mode could be different on a Netgear and and Apple router. Currently we are using 2.4GHZ band 11ng.  Is this compatible with the Apple TV?

  • OS X Mavericks and Air Port base station

    i just got a air port base station, an old one, and ive just updated my macbook pro to os x mavericks.
    when i try to connect to the air port, it says that i cannot configure the air port with the version of air port utillity. apon downloading an older version of the utility, i cannot install it because i get a masseage saying 'the version of mac os x on this volume is not supported'. i would just like to know how i can install the older version of air port utillity tobe able to get my air port to work.
    thanks for any help.

    I already have the wired router for the phone, and want to go wireless.
    You can use the AirPort Extreme base station (AEBS) or AirPort Express. Configure it so that the option to distribute IP addresses is DISABLED. Connect it to one of the LAN ports on your existing router.
    You can also use any other wireless access point.

  • Air Port vs Air Port Express

    Are they the same thing??
    My Mac Book comes with Air Port, and I am having difficutly connecting to the internet. The Air Port signal is strong. I can access the Internet if I bypass my Dlink router and connect directly to the cable modem.

    Cable modems usually need to be "blanked" before you can connect a new router or computer to it.
    Power down the cable modem.
    Wait 30 minutes (go and have a cup of tea or something).
    Connect the cable modem to the ethernet port of the D-Link Router.
    Switch on the cable modem.
    Switch on the D-Link Router.
    Wait five minutes.
    Switch on the Mac.
    Use a browser to configure the D-Link Router.
    iFelix

  • Write to serial port and digital port at the same time

    hello,
    I need to write to the digital port and the serial port at the same time. Right now I have the two vi's (to write to the serial port, write to the digital port) in the sequence structure. First I write the digital port, then write the serial port. Using the oscilloscope, the interval between these two executions is 10 ms; and I need to reduce this interval to as small as possible. I would appreciate help in any way. Thank you.

    Hello;
    This is a little tricky. Since the transition from one sequence to another is completely Software timed, and windows manages all tasks that are running at one given time, there isn't a method to reduce that transition time.
    The most you can do is try to optimize your code so all the time expent on the transition is due only to the task management.
    Hope this helps.
    Filipe A.
    Applications Engineer
    National Instruments

  • Nas-port and nas-port-type

    I recently replaced my home 1721 running 12.4(3g) with a demo UC520 running 12.4(11r)XW from work to become more familiar with it. I had my 1721 setup for PPTP dial-in with RADIUS authentication back to an SBS 2008 and everything worked great. When I swapped out for the UC520 with the same AAA settings it would not connect. Further inspection found that the nas-port-type and nas-port aaa attributes were not being passed to the RADIUS server so the VPN Access Policy was not being used. Is this a bug or do I need to tweak a few things for this version of IOS?
    Any tips would be appreciated.
    I recently replaced my home 1721 running 12.4(3g) with a demo UC520 running 12.4(11r)XW from work to get more familiar with it. I had my 1721 setup for PPTP dial-in with RADIUS authentication back to an SBS 2008 and everything worked great. When I swapped out for the 520 with the same AAA settings it would not connect. Further inspection found that the nas-port-type and nas-port aaa attributes were not being passed to the RADIUS server so the VPN Access Policy was not being used. Is this a bug or do I need to tweak a few things for this version of IOS?
    Any tips would be appreciated.

    Make sure that you have configured the ISAKMP policy in UC520.

  • Esata Port and USB Ports Not working

    My USB ports have not been working for a long time. They will charge my phone, but windows doesnt pick them up nor any other device I connect via any of the USB ports. I recently took my computer into a shop to have them fix a wire that had come undone
    and asked them to look at my USB ports and figure out why they werent working. When I got it back they told me the USB ports were connected to the motherboard and to get them to work they would need to replace the motherboard. They said however that the Esata
    port worked and I asked them if I could use that to connect my USB from my iPhone in order to connect to itunes. They said with an adapter it should work. So I bought the adapter and of course when I connect the USB in to it, the computer wont recognize the
    device. I even tried connecting the USB directly into the Esata port and still nothing, but it will charge the phone, just not recognize it. 
    Any advice would be much appreciated.
    The computer is a Dell Inspiron N7010 running Windows 7

    Hi,
    Obviously, you can't connect USB directly into Esata port, for they are not compatible.
    Attempt to install your phone usb driver and then check if it works.
    If not, it should be related to your adater, not all adapters support data transfer.
    Andy Altmann
    TechNet Community Support

  • LACP between optical port and RJ45 port ?

    Dear all:
    I got one problem about lacp.This is the case:
    Our core switch is cisco 4506e switch, and recently we got one huawei s5700-28C-EI which uplink to our cisco 4506. We want to enable lacp between them. But there is one problem, my s5700 and 4506e all just leave one 10GE port. I know they cannot support lacp between 10GE and 1GE now. So  I want to enable lacp between 1GE optical port and 1GE RJ45 port.  May I ?

    Etherchannel does not care about the media in use as long as the speeds/duplex etc. are the same so you should be able to mix copper and fibre into the same etherchannel.
    Jon

Maybe you are looking for