Due to ORA-01033, I could not start my BW 3.5 instance

Hello Friends,
I am not able to start up my BI 3.5 instance from SAP GUI.
Error in the SAP Manager console is
"Database: > ORA-01033: ORACLE initialization or shutdown in progress"
So I shutdown my oracle database,log on as sysdba and applied following commands.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 219749116 bytes
Fixed Size                   453372 bytes
Variable Size             134217728 bytes
Database Buffers           83886080 bytes
Redo Buffers                1191936 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
What is this ORA-01589 error all about?
I am still not able to start my BW instance.
Please help me with this.
Thanks & Regards,
-Hardik

Hi Hardik,
This error normally comes due to the inconsistent data file and can be recovered if you are having the current archive files in your oraarch folder.
Shutdown the database first then startup the database as follows:
connect / as sysdba
SQL>startup mount
SQL> RECOVER DATAFILE 'E:\ORACLE\S01\SAPDATA1\SYSTEM_\SYSTEM.DATA1';
Then open the database as below:
SQL>ALTER DATABASE OPEN;
I hope this will solve the problem provided the required archive files are available.
Regards,
Vinayak

Similar Messages

CONCSUB failed due to ORA-12154: TNS:could not resolve service name

Hiall,
While bringing up concurrent managers getting the below error.
Cause: CONCSUB failed due to ORA-12154: TNS:could not resolve service name
I just cloned the instance.
urgent help is appreciated as I am missing the dead line to complete clone.
Regards,
Siva

Pleas post OS and EBS version
Please check the listener is up and running on DB tier.
TROUBLESHOOTING GUIDE: ORA-12154 & TNS-12154 TNS:could not resolve service name [ID 114085.1
Edited by: 3Amigos on Nov 21, 2010 9:16 AM

Windows could not start DBConsole for new database instance

Hi,
I am getting this error "Windows could not start the OracleDBConsoleOracleInstance2 on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the system vendor, and refer to service-specific error code 1".
I installed Oracle 11g on Windows 7 and created my 1st database instance (oracleInstance1) successfully with a listener and service configured. I could access this database using DBconsole URL: https://hostname:1158/em.
I see the services started for:
OracleDBConsoleOracleInstance1
OracleOraDb11g_home1TNSListener
OracleServiceOracleInstance1
Next, I created a second database instance (oracleInstance2) and have configured a new service for this database. I am using the same listener as I intend to use one database instance at any point of time.
However, I got this warning message during configuration:
"Enterprise manager configuration succeeded with the following warning - Error starting Database Control. Please execute the following command(s).
1. Set the environment variable ORACLE_UNQNAME to Database unique name.
2. C:\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole"
To start the new database console, I stopped the previously running DBConsole, OracleDBConsoleOracle1 and started the new DBConsole OracleDBConsoleOracle2 and get the above error.
When I try to start dbconsole manually using "emctl dbconsole start", it starts OracleDBConsoleOracle1 instead.
I changed environment variables ORACLE_SID=oracle2 and ORACLE_UNQNAME=oracle2
What am I missing here. Please help!
Thank you.

968952 wrote:
Hi,
I am getting this error "Windows could not start the OracleDBConsoleOracleInstance2 on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the system vendor, and refer to service-specific error code 1".
I installed Oracle 11g on Windows 7 and created my 1st database instance (oracleInstance1) successfully with a listener and service configured. I could access this database using DBconsole URL: https://hostname:1158/em.
I see the services started for:
OracleDBConsoleOracleInstance1
OracleOraDb11g_home1TNSListener
OracleServiceOracleInstance1
Next, I created a second database instance (oracleInstance2) and have configured a new service for this database. I am using the same listener as I intend to use one database instance at any point of time.
However, I got this warning message during configuration:
"Enterprise manager configuration succeeded with the following warning - Error starting Database Control. Please execute the following command(s).
1. Set the environment variable ORACLE_UNQNAME to Database unique name.
2. C:\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole"
To start the new database console, I stopped the previously running DBConsole, OracleDBConsoleOracle1
Why?
and started the new DBConsole OracleDBConsoleOracle2 and get the above error.
When I try to start dbconsole manually using "emctl dbconsole start", it starts OracleDBConsoleOracle1 instead.
I changed environment variables ORACLE_SID=oracle2 and ORACLE_UNQNAME=oracle2
What am I missing here. Please help!First thing you are missing is showing us what you did. Instead you just described it, and that leaves a lot of room for questions. Copy and paste from a command prompt can work wonders here.
From a command prompt, enter the following:
set ORACLE_SID=oracle2
set ORACLE_UNQNAME=oracle2
set | sort
net start
emctl start dbconsolecopy the entire session, commands and full responses, and paste back here.
>
Thank you.Just to take a side road ...
"I am using the same listener as I intend to use one database instance at any point of time. "
Doesn't' matter if you use one instance or 100. The listener was DESIGNED to service multiple instances of multiple versions running from multiple homes. It is nothing but a connection broker. A telephone switchboard, if you will. All you need is a single listener, with the default name of LISTENER, running on the default port of 1521. It will handle all the database instances you care to throw at it. More instances than anyone in their right mind would ever put on a single server. Your server will run out of capacity to host additional instances before the listener runs out of capacity to service them. Especially since your 'server' is really just a toy in the Oracle world.

Could not start the app due to a configuration problem - Launchpad issue

Hi,
When I try to launch a custom app from Fiori Launchpad I get an error could not start app due to configuration problem. Error 500- Internal Server Error.
App works correctly when I try to execute via URL http://XXX/sap/bc/ui5_ui5/sap/zmyfioriui5_v11.
Screenshot of Chrome debugging and lpd_cust attached.
It seems problem with ResolveLink but unable to conclude.
Any Suggestion how to proceed.
Thanks,
Mayank

Hi Mayank,
Few modifications :
For additional information field : ".component" at the end is not required.
Only keep : SAPUI5.Component=sap.ui.demo.myFiori
Check this screenshot :
Also, please don't keep Semantic object name and application alias as same name i.e. ymyfioriui5_v11. Its very confusing.
If above doesn't solve, please confirm below :
ZXXXLPD is your launchpad role in LPD_CUST tcode.
Please use TRANSACTIONAL instead of transactional (might be case sensitive)
Show your semantic object "ymyfioriui5_v11" created in /UI2/SEMOBJ
Regards,
Tejas

Error in Fiori Launchpad "could not start the app due..."

Hello everyone,
I am having a previously unseen (well, at least for me) error which raises on a click on the tile "Track Purchase Orders" on the SAP Fiori Launchpad:
"Could not start the app due to an internal error" (see the screenshot attached)
I haven't found any help on this error on Google and SAP portals.
The other applications work fine. So did this one before the implementation of SAP_UI 740 SP09 (before that it was SAP_UI 740 SP08). We applied all the notes specified in this post http://scn.sap.com/docs/DOC-56967
Components needed for Track Purchase Orders are patched to their maximum levels (UIX01EAP 100 SP03 and SRA020 600 SP05). OData and UI5 services are activated.
Plus, this error doesn't appear in the Gateway error logs (transaction /iwfnd/error_log) so troubleshooting is difficult.
The issue is systematically reproducible and has been reproduced on several computers.
Thanks a lot if you have any insight about this issue!
Best regards,
Guillaume

Thank you for replying.
I have inspected the element and clicked on the tile. The network tab is below:
The status seems OK.
The response for ResolveLink:
{"d":{"results":[{"__metadata":{"id":"http://<server>:<port>/sap/opu/odata/UI2/INTEROP/NavTargets('PurchaseOrder-track~68')","uri":"<server>:<port>/sap/opu/odata/UI2/INTEROP/NavTargets('PurchaseOrder-track~68')","type":"INTEROP.NavTarget"},"id":"PurchaseOrder-track~68","shellType":"FLP","postParameters":"","text":"Track Purchase Order","applicationData":"SAPUI5.Component=ui.s2p.mm.purord.tracking","applicationAlias":"TrackPurchaseOrder","applicationType":"URL","url":"/sap/bc/ui5_ui5/sap/mm_purord_tpo"}]}}
I'm surprised that gbapp_poapproval and sra001 OData services are called here (with an intriguing ";mo")... We have found these errors in our /iwfnd/error_log screen after the SAP_UI 740 SP09 patch. Seeing this, we have installed GBAPP002 600 SP6 and SRA001 600 SP4 and activated the OData services but have not tried to use the corresponding apps (meaning that we have not done any other app implementation tasks because we don't really intend to for the moment).
In case the two problems are related, these are the responses to these requests:
For gbapp_poapproval request
{"error":{"code":"GBAPP_APV_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB173F121613F0E1008000A87C135A","timestamp":"20140814124456.5404250","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
For gbapp_prapproval request
{"error":{"code":"GBAPP_APV_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB0B1112160FA0E1008000A87C135A","timestamp":"20140814124456.4449070","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
For sra001_pcapproval request
{"error":{"code":"SRA001_CMN_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB0E4512161140E1008000A87C135A","timestamp":"20140814124456.3244590","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"SRA001_CMN_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
Regards,
Guillaume

Could not start the app due to a configuration problem

Hi Gurus,
I have an issue to be resolved asap, need your assistance.
I have implemented SAP Fiori apps (Approve Purchase Order, Approve Purchase Contract, My Leave Request and Approve Leave Request)
We have only one Gateway system and 3 back end ECC systems.
Gateway Client 220 is integrated with ECC Dev and performed all the configurations and tested successfully.
We have created a new client 320 with a copy of client 220, Integrated 320 client to ECC quality system and performed necessary configurations and while testing Approve Purchase order and Approve Purchase Contract tiles are loading the count from ECC Quality system but when I click on the tile it throws an error "could not start the app due to a configuration problem" and when I click the error ot is being redirected to Client 220.
From the inspect element I found below error
2015-04-13 12:22:13 INTEROP service's ResolveLink operation returned 2 targets for hash '#PurchaseOrder-approve', first one is used. - used target: {"id":"PurchaseOrder-approve~652","shellType":"FLP","postParameters":"","text":"Approve Purchase Orders","applicationData":"SAPUI5.Component=ui.s2p.mm.purchorder.approve","applicationAlias":"ApprovePurchaseOrders","applicationType":"URL","url":"/sap/bc/ui5_ui5/sap/mm_po_apv"}
ignored target: {"id":"PurchaseOrder-approve~65k","shellType":"FLP","postParameters":"","text":"Approve Purchase Orders","applicationData":"SAPUI5.Component=ui.s2p.mm.purchorder.approve","applicationAlias":"ApprovePurchaseOrders","applicationType":"URL","url":"/sap/bc/ui5_ui5/sap/mm_po_apv"} sap.ushell_abap.adapters.abap.NavTargetResolutionAdapter
I did not found any duplicate # key entries in table USOBHASH.
Any response is highly appreciated, thanks in advance
Regards,
Srujan

Hi Michael,
Thanks for that, I have raised an OSS message to SAP, to seek their assistance on the solution I followed to fix the issue. I have reverted back the changes and reproduced the issue for SAP guys to investigate further, at last they concluded me there is an external alias defined for /sap/bc/ui5_ui5/sap in transaction SICF in GP1/320, which contains a hard-coded client 220.
This is responsible for the fact that the services are redirected/opened in client 220
After removing the client hard-coded in system alaises under /sap/bc/ui5_ui5/ in transaction SICF, I have reverted back the change from "Alternative Logon Procedure" to "standard" in logon procedure of each service and tested, now the issue got resolved.
This could help someone to resolve the similar issue.
Thanks everyone
Regards,
Srujan

Fiori leave request error "Could not start the app due to an internal error"

Hi,
I'm getting this error "Could not start the app due to an internal error" when accessing leave request application.
I don't get this error when I login and launch the app for the first time. when I go back to the home screen and select "My Leave Requests" app again, I get this error.
If I close the error message and do a browser refresh, everything is fine again for the first time, if I access the LR app again- same error .
Other apps are working fine.
I don't see any error in gateway or App logs.
below is the Request URI
/sap/opu/odata/UI2/INTEROP/ResolveLink?linkId=%27LeaveRequest-createLeaveRequest%27&shellType=%27FLP%27&formFactor=%27desktop%27
Service call info
Anyone with similar issue? any SAP notes?
we are on
UI2_731        100    0009    SAPK-10009INUI2731        SAP UI2 IMPL. FOR NW 7.31
UI2_FND        100    0009    SAPK-10009INUI2FND        SAP UI2 FOUNDATION
UI2_SRVC    100    0009    SAPK-10009INUI2SRVC        SAP UI INTEGRATION SERVICES
UI5_731        100    0009    SAPK-10009INUI5731        SAP UI5 TEAM PROVIDER ON 731
UISAPUI5    100    0009    SAPK-10009INUISAPUI5    SAP UI5
UI_INFRA    100    0009    SAPK-10009INUIINFRA        SAP UI INTEGRATION INFRASTRUCTURE
UIX01HCM    100    0003    SAPK-10003INUIX01HCM    UI for HCM Application
Tags edited by: Michael Appleby

Hi Masa,
We have required SAP notes now, we are on version 1.22.5.
It is still the same, working the first time I access the App, but subsequent access wont work until i refresh browser.
I've include the response and lpd/tile screens.
Thanks,
Phani

ORA-12154: TNS:could not ... for imported pl-sql function in Process Flow

Hi
I included in a process flow a PL-SQL function as user defined transformation.
This PL-SQL function resides in my source database, from where I imported it in OWB.
When I am trying the run the Process Flow (from control center manager) I get the following message upon executing that function.
ORA-12154: TNS:could not resolve the connect identifier specified
When I don't include that function my process flow works. Mappings in my process flow read from the same source database as where the function is.
So I don't think it is caused by a problem with tnsnames.ora..
Thanks in advance for anybodies help.
Hans

Hi Oleg,
Thanks for your reply. Indeed I didn't create a runtime repository.
However don't like to do that to for the source DB.
I wonder if I can get around that by executing a SQLplus script instead.
I tried this but my script does never complete when it is started from the process flow. If I run it in SQLplus it runs fine and completes instantly.
My script does:
update 1 column in one record of a table.
commit;
exit;
What do you think?
Thanks,
Hans

CRS could not start after reboot

I installed oracle 10g R2 RAC on RHEL4 U4 with 2 nodes. It runs fine on 2 nodes (without reboot after installation). But when I rebooted one node, I found that the CRS daemon could not start automatically. The boot menu show "Starting CRS" [OK]. The "init.crs start" command won't init the CRS daemon.
$ ./crs_stat
CRS-0184: Cannot communicate with the CRS daemon.
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA1/RAC/spfileRAC.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA1/RAC/spfileRAC.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
$ /etc/init.d/init.crs start
Startup will be queued to init within 90 seconds.
$ cat /etc/inittab
id:5:initdefault:
# Run xdm in runlevel 5
x:5:respawn:/etc/X11/prefdm -nodaemon
h1:35:respawn:/etc/init.d/init.evmd run >/dev/null 2>&1 </dev/null
h2:35:respawn:/etc/init.d/init.cssd fatal >/dev/null 2>&1 </dev/null
h3:35:respawn:/etc/init.d/init.crsd run >/dev/null 2>&1 </dev/null
$ ls /etc/rc5.d
K01tog-pegasus K35smb K85mdmpd S05openibd S18rpcidmapd S55sshd S96readahead
K02NetworkManager K35vncserver K87auditd S06cpuspeed S19rpcgssd S56rawdevices S97messagebus
K05saslauthd K35winbind K87ipmi S08arptables_jf S19vmware-tools S56xinetd S97rhnsd
K10dc_server K40smartd K89netplugd S08iptables S25netfs S58ntpd S98cups-config-daemon
K10psacct K50ibmasm K90bluetooth S09isdn S26apmd S80sendmail S98haldaemon
K12dc_client K50netdump K94diskdump S10network S26lm_sensors S85gpm S99local
K15httpd K50snmpd K96pcmcia S12syslog S27vasd S90crond
K20nfs K50snmptrapd S00microcode_ctl S13irqbalance S28autofs S90xfs
K24irda K50tux S01sysstat S13portmap S29oracleasm S95anacron
K25squid K73ypbind S04readahead_early S14nfslock S44acpid S95atd
K30spamassassin K74nscd S05kudzu S15mdmonitor S55cups S96init.crs
Do I miss any configuration to initialize the CRSD at boot?
thanks, ezlee

did you run cluster verification utility for node connectivity?
http://docs.oracle.com/cd/E11882_01/rac.112/e16794/cvu.htm#autoId19
also check the logs ad $GRID_HOME/log/<hostname>/...
starting with alert.log, then the ones its referencing

ORA-12154: TNS:could not resolve service name

Hi Guru's
i applied Maintainacepack 3480000 patch on my application for upgrading 11.5.7 to11.5.10.2, after completion of patch, I run the autoconfig it has given bellow error, please anybody can help me, i need to finish my task immediately, please provide me the solution.
autoConfig Profile Phase
Running Profile Process 1 of 1 for CLN_TOP
Executing script in InstantiateFile:
/sgmtemp/prodcomn/admin/install/MSBEP004_dcpsr006osm/clnadmprf.sh
script returned:
clnadmprf.sh started at Sun Feb 17 06:24:13 WST 2008
The environment settings are as follows ...
ORACLE_HOME : /sgmtemp/prodora/8.0.6
ORACLE_SID :
TWO_TASK : msbep004
PATH : /sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/8.0.6/bin:/sgmtemp/prodappl/fnd/11.5.0/bin:/sgmtemp/prodappl/ad/11.5.0/bin:/sgmtemp/prodcomn/util/jre/1.1.8/bin:/sgmtemp/prodcomn/util/unzip/unzip::/sgmtemp/prodora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/8.0.6/bin:/sgmtemp/prodcomn/util/jre/1.1.8/bin:/sgmtemp/prodcomn/util/unzip/unzip:/sgmtemp/prodora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/java14/jre/bin:/usr/java14/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/sgmtemp/prodappl/bin:/usr/bin/X11:/sbin:/usr/lpp/pd/bin:.
LD_LIBRARY_PATH : /sgmtemp/prodora/8.0.6/network/jre11/lib/aix/native_threads:/sgmtemp/prodappl/cz/11.5.0/bin:/sgmtemp/prodora/8.0.6/lib:/usr/dt/lib:/usr/openwin/lib
Executable : /sgmtemp/prodora/8.0.6/bin/sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Feb 17 06:24:13 2008
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve service name
clnadmprf.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
thanks

Please Apply "Patch 5985992 - TXK AUTOCONFIG ROLLUP PATCH Q (JUL/AUG 2007)", run AutoConfig, and check then.

Regarding ORA-01102 ORACLE COULD NOT MOUNT DATABASE IN EXCLUSIVE MODE.

Hellow Friends,
I was testing my recovery strategy for control file. Out of two my control files I deleted one and tried to start when oracle gave me error that could not find so and so file in such and such location. I than copied first member which is in other location to the deleted file location. Since than I could not start my database gving me same error ORA-01102.
Yes I can recreate control file because I am having all my other files intact.
Now is there anybody who share knowledge with me to feel me pride of such honour.
Thanks All.
Your Friend.
Sumeet.

Hi all
On this - it had me vexed for a while, I was installing
8.1.7 on Solaris 2.9 - but when I went to prep the db,
kept on getting the error 01102.
Found out that if I shut down the db (immediate),
changed the 'remote_password' param to shared then went back in to svrmgr - reshut the database and redid startup pfile=$ORACLE_HOME/etc it cured the problem.
Suspect this is a hangover from 7, when Oracle kept enforcing defaults on setting up dbs, bit like their catalog and catproc scripts, they still have errors that were there in the
year dot.
Cheers

MSDAORA,IIS,ORA-12154: TNS:could not resolve service name

Hi All,
I have a Web Service that coded in VS2008, using ORACLE DB(9i).
At a time the application working fine and I can access and do everything with database.
Some other time database server is down for scheduled maintenance. If I try to run the application at this point of time it will raise err "ORA-12154: TNS:could not resolve service name".
When i reset iis it start to work fine for a while.Then same problem occurs again.
My connection string is connectionString="provider=MSDAORA.1;data source=***;user id=***;password=***;"
is there any solution?
i tried that;
If theire is multiple copies of OCIW32.dll you have to make sure that there is only one copy of OCIW32.dll which should be in /Bin folder of the oracle home folder.
Add the IUSR_machine name account and the IWAM_machine name account to the Oracle home folder. Give both accounts full control.
Create empty file tnsnames.ora in same directory as aspnet_wp.exe,

Hi,
The issue doesnt make much sense on the surface at least. 12154 means the client couldnt figure out what you were referring to with your Data Source= entry. If the database was taken down, I'd expect an "oracle not available" or some other sort of error, as the client should have still be able to resolve the entry at least, even if the database wasnt up at the time.
What do you mean by "When i reset iis it start to work fine for a while.Then same problem occurs again."? The same problem meaning you get 12154 when you take the database down? Or you get 12154 without a db restart?
Are you using TNSNames.ora for client naming resolution, or something else (ldap, for example)?
Greg

CRS-0215: Could not start resource

Hello
This is my first time installing clusterware. However, i have not been too successful at it. This is my configuration:
Operating System: RHES 5.3
Oracle Database 11gR1
OpenFiler used to configure shared disks
After several attempts, i was able to run the root.sh script on both nodes.
Output on first node:
[root@vx0301 oracle]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory to 770.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete
[root@vx0301 oracle]# /u01/crs11g/root.sh
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: vx0301 vx0301-priv vx0301
node 2: vx0302 vx0302-priv vx0302
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
vx0301
Cluster Synchronization Services is inactive on these nodes.
vx0302
Local node checking complete. Run root.sh on remaining nodes to start CRS daemons.
Output on second node:
[root@vx0301 oracle]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory to 770.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete
[root@vx0301 oracle]# /u01/crs11g/root.sh
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: vx0301 vx0301-priv vx0301
node 2: vx0302 vx0302-priv vx0302
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
vx0301
vx0302
I also got the errors:
Starting GSD application resource on (2) nodes1:CRS-0215: Could not start resource 'ora.vx0301.gsd'
Starting ONS application resource on (2) nodes1:CRS-0215: Could not start resource 'ora.vx0301.ons'
There were no log files.
When i clicked ok on the execute scripts page, i got the following errors in the configuration assistants page:
Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
Command = /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
The ONS configuration failed to create
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
The "/u01/crs11g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
Command = /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
The ONS configuration failed to create
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
The "/u01/crs11g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Notification Server Configuration Assistant" (attempt 2):
Command = /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
The ONS configuration failed to create
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
The "/u01/crs11g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Contents of the /u01/crs11g/cfgtoollogs/configToolFailedCommands script:
[oracle@vx0301 ~]$ cat /u01/crs11g/cfgtoollogs/configToolFailedCommands
# Copyright (c) 1999, 2007, Oracle. All rights reserved.
/u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
/u01/crs11g/bin/oifcfg setif -global eth0/172.30.4.0:public eth1/192.168.1.0:cluster_interconnect
/u01/crs11g/bin/cluvfy stage -post crsinst -n vx0301,vx0302
I tried running /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251 manually from the terminal:
[root@vx0301 oracle]# /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
The ONS configuration failed to create
Output of the ons.log file:
[root@vx0301 oracle]# cat /u01/crs11g/log/vx0301/racg/ons.log
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2010-01-25 13:59:15.786: [    RACG][3055679168] [10113][3055679168][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
2010-01-25 13:59:33.359: [    RACG][3055584960] [10229][3055584960][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
2010-01-25 14:01:00.319: [    RACG][3086849728] [10734][3086849728][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
2010-01-25 14:02:02.723: [    RACG][3086628544] [11105][3086628544][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
[root@vx0301 oracle]#
I am absoutely stumped as to what to do next. Any help is greatly appreciated.

I tried running ruclufvy.sh stage -post crsinst -n vx0301,vx0302 -verbose. Here is the output:
[oracle@vx0301 clusterware]$ ./runcluvfy.sh stage -post crsinst -n vx0301,vx0302 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "vx0301"
Destination Node Reachable?
vx0301 yes
vx0302 yes
Result: Node reachability check passed from node "vx0301".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
vx0302 passed
vx0301 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
vx0302 running
vx0301 running
Result: Daemon status check passed for "CSS daemon".
Cluster manager integrity check passed.
Checking cluster integrity...
Node Name
vx0301
vx0302
Cluster integrity check passed
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations.
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
ERROR:
OCR integrity is invalid.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name Running
vx0302 yes
vx0301 yes
Result: Liveness check passed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name Running
vx0302 yes
vx0301 yes
Result: Liveness check passed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name Running
vx0302 yes
vx0301 yes
Result: Liveness check passed for "EVM daemon".
Liveness of all the daemons
Node Name CRS daemon CSS daemon EVM daemon
vx0302 yes yes yes
vx0301 yes yes yes
Checking CRS health...
Check: Health of CRS
Node Name CRS OK?
vx0302 yes
vx0301 unknown
Result: CRS health check failed.
CRS integrity check failed.
Checking node application existence...
Checking existence of VIP node application
Node Name Required Status Comment
vx0302 yes exists passed
vx0301 yes exists passed
Result: Check passed.
Checking existence of ONS node application
Node Name Required Status Comment
vx0302 no exists passed
vx0301 no exists passed
Result: Check passed.
Checking existence of GSD node application
Node Name Required Status Comment
vx0302 no exists passed
vx0301 no exists passed
Result: Check passed.
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@vx0301 clusterware]$
I also tried running ./ocrchek on both nodes. Here is the output:
[oracle@vx0301 bin]$ ./ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 2
Total space (kbytes) : 3306636
Used space (kbytes) : 2056
Available space (kbytes) : 3304580
ID : 1425438992
Device/File Name : /dev/sdb1
Device/File integrity check failed
Device/File not configured
Cluster registry integrity check failed
[oracle@vx0301 bin]$ ssh vx0302
Last login: Mon Jan 25 13:52:03 2010 from vx0301
[oracle@vx0302 ~]$ cd /u01/crs11g/bin/
[oracle@vx0302 bin]$ ./ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 2
Total space (kbytes) : 3306636
Used space (kbytes) : 2056
Available space (kbytes) : 3304580
ID : 1425438992
Device/File Name : /dev/sdb1
Device/File integrity check failed
Device/File not configured
Cluster registry integrity check failed
[oracle@vx0302 bin]$
From the results, the ids are the same, and so is the OCR disk. But the integrity check has failed. How do i interpret this output?

MDM Adapter: MDM Adapter listener could not start (MdmSecureSocketFactory)

Hi there,
We are running the following versions of the PI MDM adapter:
MDM_ADAPTER 710.700 SP7 (1000.710.700.7.0.20110411174317)
MDM_JAVA_API 710 SP5 (1000.710.0.5.111.20101227095400)
com.sap.mdm.tech.apireset 710 (710.20101227094734.0000)
com.sap.mdm.tech.connector 710 (710.20101227094734.0000)
com.sap.mdm.tech.mdm4j 710 (710.20101227094734.0000)
tc/mdm/adapter/svc 710.700 (8917411)
And the following versions on the MDM Server itself:
SHARED_COMP 7.1.05.104
MDS 7.1.05.104
MDIS 7.1.05.104
MDSS 7.1.05.106
MDLS 7.1.05.99
All the MDM adapters have the same error now:
MDM Adapter listener could not start due to:
com/sap/mdm/net/MdmSecureSocketFactory
Does anyone know what this error means?
Any help would be greatly appreciated
Lynton

Was just a version issue, the MDM java API and MDM adapter had different versions.....un-deploying and re-deploying solved the issue.
Lynton

Could not start disp+work.exe dispatcher on IDES4.7

could not start disp+work.exe dispatcher on IDES4.7
Messageserver is running
All services of oracle r running

trc file: "dev_disp", trc level: 1, release: "620"
Wed Sep 19 13:50:26 2007
systemid   560 (PC with Windows NT)
relno      6200
patchlevel 0
patchno    251
intno      20020600
pid        3352
***LOG Q00=> DpSapEnvInit, DPStart (00 3352) [dpxxdisp.c   966]
     shared lib "dw_xml.dll" version 252 successfully loaded
     shared lib "dw_xtc.dll" version 252 successfully loaded
     shared lib "dw_stl.dll" version 252 successfully loaded
Wed Sep 19 13:50:31 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3140]
MtxInit: -2 0 0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 608 MB
<ES> 607 blocks reserved for free list.
ES initialized.
Wed Sep 19 13:50:32 2007
***LOG Q0K=> DpMsAttach, mscon ( mysap) [dpxxdisp.c   8832]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Wed Sep 19 13:51:12 2007
ERROR => W0 (pid 3412) died [dpxxdisp.c   11210]
ERROR => W1 (pid 3420) died [dpxxdisp.c   11210]
ERROR => W2 (pid 3428) died [dpxxdisp.c   11210]
ERROR => W3 (pid 3436) died [dpxxdisp.c   11210]
ERROR => W4 (pid 3444) died [dpxxdisp.c   11210]
ERROR => W5 (pid 3452) died [dpxxdisp.c   11210]
ERROR => W6 (pid 3460) died [dpxxdisp.c   11210]
ERROR => W7 (pid 3468) died [dpxxdisp.c   11210]
ERROR => W8 (pid 3476) died [dpxxdisp.c   11210]
ERROR => W9 (pid 3484) died [dpxxdisp.c   11210]
ERROR => W10 (pid 3492) died [dpxxdisp.c   11210]
ERROR => W11 (pid 3500) died [dpxxdisp.c   11210]
ERROR => W12 (pid 3508) died [dpxxdisp.c   11210]
ERROR => W13 (pid 3516) died [dpxxdisp.c   11210]
ERROR => W14 (pid 3524) died [dpxxdisp.c   11210]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c   503]
ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c   13129]
Wed Sep 19 13:51:15 2007
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9058]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3352) [dpxxdisp.c   7637]
******************************************************************************************************************************88
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Wed Sep 19 13:50:46 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\ECC\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\ECC\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\ECC\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.112)
B New connection 0 created
M systemid   560 (PC with Windows NT)
M relno      6200
M patchlevel 0
M patchno    251
M intno      20020600
M pid        3412
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3412) [dpxxdisp.c   1016]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora81 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPECC's password
C Connecting as /@ECC on connection 0 ...
C Attaching to DB Server ECC (con_hdl=0,svchp=06A497F8,svrhp=06A49604)
C
C Wed Sep 19 13:50:47 2007
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c      3566]
C *** ERROR => CONNECT failed with sql error '12541'
[dboci.c      9536]
C Try to connect with default password
C Connecting as SAPECC/<pwd>@ECC on connection 0 ...
C Attaching to DB Server ECC (con_hdl=0,svchp=06A497F8,svrhp=06A49410)
C
C Wed Sep 19 13:50:48 2007
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c      3566]
C *** ERROR => CONNECT failed with sql error '12541'
[dboci.c      9536]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 962] [dbsh    0962 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 962] [dbsh    0962 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   8277]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = -1
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    rfc_req = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server mysap_ECC_00 on host mysap (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Wed Sep 19 13:50:48 2007
M * RELEASE     620
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        8408
M * COUNTER     1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3412) [dpnttool.c   345]

Due to ORA-01033, I could not start my BW 3.5 instance

Similar Messages

Maybe you are looking for