Dump(DYNPRO_MSG_IN_HELP)  while taking print out in J1IA102.

Hi All,
While pressing the Print button in both the transactions its showing the following details:
ShrtText
Screen: Illegal message
What happened?
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
Error analysis
During "Exit Command" processing, the program tried to send a " " message.
This is not allowed at this point in processing.
The program had to be terminated.
Screen name.............. "SAPLJ1IEX"
Screen number............ 0001
Trigger Location of Runtime Error
Program SAPLSZA0
Include LSZA0F21
Row 30
Module type (FORM)
Module Name CHECK_PARA1_XOR_PARA2
FORM check_para1_xor_para2
USING para1
para2
check_type.
CASE check_type.
WHEN C_A_INDEX_A_NUMBER.
IF PARA1 = 0 AND PARA2 = SPACE
OR PARA1 0 AND PARA2 SPACE.
MESSAGE E052 RAISING PARAMETER_ERROR.
ENDIF.
WHEN c_a_handle_a_number.
IF para1 = space AND para2 = space
OR para1 space AND para2 space.
MESSAGE e053 RAISING parameter_error.
ENDIF.
>>> WHEN c_p_handle_p_number.
IF para1 = space AND para2 = space
OR para1 space AND para2 space.
MESSAGE e054 RAISING parameter_error.
ENDIF.
WHEN OTHERS.
ENDCASE.
ENDFORM. "CHECK_PARA1_XOR_PARA2
PLease help.
Regards
VIjju

Hi ,
better to check for sap notes.
regards
Prabhu

Similar Messages

  • Quantity doubling while taking print out

    hi,
    when a print out of invoice is taken for eg if the quantity is 50 and amount is 500 in invoice it is comming as quantity 100 and amount 1000, when the print out is taken for the second time every thing is comming correct, this is happening only for very few invoices not able to analyse the senario as it is not a happening regularly. but when we see the invoice document it is showing correct values.
    please assist me in this senario how to get this fixed.
    thanks

    hi shakeer,
    you have two options here:
    1. limit your print outs it might get over right from one another.
    2. DEBUGG the same and check the Program where went wrong
    hope this clears your issue
    balajia

  • SAP Font Too Small While Takeing Print Out

    Helo All...
    This is regarding SRET reports. When I display SRET report, the font is OK, but when I take a printout , the font is appearing too small.
    What could be the reason? and how to increase the font?
    <<Text removed by moderator>>
    Thanks...
    Edited by: Matt on Nov 14, 2008 10:20 AM - Please do NOT offer points

    hi friend,
    Plz provide the details in ur report
    which Function Module u can use for output?
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    or
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    & using any layout set in ur report?
    Regards,
    K.S.Kannan.

  • How to use the t-code vf31 tor taking print out of invoice

    Hi,
      How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
    venu

    Hi,
    Please find the steps
    Output type                     RD00
    Transmission medium             1
    Sort order                      01
    Processing mode                 1
    Please give the oppropriate fields,
    if the still error persists  check the configuration in NACE transaction code.
    thanks
    Kuntla

  • Pages button  in printer dialog box  is deactivating while taking print ?

    Hello exports,
    while taking print abap reports (developed using smartforms) pages buttoon (from- to) in printer dialog box
    is by default is deactivating .How to activate this button ? who will do this one (Abaper or basis guy).
    pls help me in this.

    Hi,
    So, as you see a field "from ... to ...", I think you are talking about the "background print parameters" dialog (this is not the smart forms print dialog, which contains field "page selection").
    I don't understand. "Pages from ... to ..." is always displayed, and the user can enter them manually. Do you want to enter pages programmatically?
    What is your code or the steps to display this dialog? Is it fully standard or do you use GET_PRINT_PARAMETERS programmatically?
    Sandra

  • Taking print out allignment problem(urgent)

    Dear all,
    I am faching an allignment problem while taking printout,i didnt face this problem before , i didnt able to find solution for this problem so anybody help me to solve this problem .
    and also give me the solution why this problem arise.
    thanks & regards,
    Hari Baskar.I

    Hi friend,
    There must be some problem in printer settings
    or
    Try reducing the size of the box and see because of the size also printer may avoid the boxes.
    Just try these both i think either one of the both must be a problem.
    Still did not get the desired output please revert back to me. I will help you.
    Thanks,
    Sri Hari

  • Boxes are not printing after taking print out

    Dear All,
    i have developed a script ,which contains some rows and columns.To display rows and columns i have used BOX command.In print preview all boxes are coming properly,but if i take Print out(Even in PDF view also) some boxes are not printing.What would be the problem here?
    with regards
    Naresh

    Hi friend,
    There must be some problem in printer settings
    or
    Try reducing the size of the box and see because of the size also printer may avoid the boxes.
    Just try these both i think either one of the both must be a problem.
    Still did not get the desired output please revert back to me. I will help you.
    Thanks,
    Sri Hari

  • Issue while giving Print out

    Hi all,
             I have a user who has all the administrative rights and also the rights for purchasing. When he tries to take print outs of GRPO, the system gives a message that the user is not permitted to do this action. Also, the user has full authorisations for the print preferences?? Can anyone plesae suggest me how to handle this??  We are on SAP 2005 B PL 26.
    Best Regards,
    Amon

    Hi Jeyakanthan,
                           Thanks for the reply. I checked it and the user has full authorization for the same. But there is no such option for printing in purchase?? How do i handle this now ? Also Jeyakanthan, when i give full authorization to the user, he can take print outs. The moment i give selective authorizations, the problem arises.
    Thanks,
    Amon

  • Taking Print out in the Time schema.

    Dear All,
    I just want to take a printout in time schema TM00. with all rules which embedded with the schema,
    I heard there is a report to get it. Pls any one can tell me what is tat report.
    Thanks.
    Dinesh.

    Hi,
    You can do this
    Just go to PE01 -
    > enter schema name TM00 --> click on the 7 icon to view the structural view
    --> click on display
    In the menu bar  in the Schema sub menu click on the print
    or use RPDASC00 for schema & RPUCYD00 for PCR's
    Regards
    Hemant V. Mahale

  • Alv report Print out Problem

    Hi Experts,
       I am having problem while taking print out of Alv report format. In that report, 1 column contains  Unit  Values.
    Eg.  Unit value - 'LE' , AFTER USING CONVERSION EXIT LOGIC it is converted into 'AU'  which is finally displayed in the Alv -Report display format. 
    while taking Print-out of that report , that field Unit Value 'AU' is Shown in this format  "****'.
    Please give me your Valuable Suggestions.
    Thanks and Regards
    BalaNarasimman M

    while defining filed catalog define the data type also
      clear l_fieldcat.
      l_fieldcat-fieldname  = 'MEINS'.
      l_fieldcat-datatype = 'UNIT'.
    l_fieldcat-no_out     = ' '.
      l_fieldcat-do_sum = 'X'.
      l_fieldcat-seltext_l  = 'UOM'.
      append l_fieldcat to p_fieldtab.
    may be it would help.
    anya

  • Purchase Order quantity is rounding off in Print out

    HI ALL,
    In the Purchase Order quantity is rounding off while taking print out. I gave the quantity 10.450 LIT and it is rounding off to 10 LIT and if I gave 10.560 LIT is rounding off 11 LIT while taking print out. I am thinking some note we have to add.We are using ECC 5.0 version. Please give me the solution.
    We are using standard functionalitieslike program(SAPFM06P) and form (MEDRUCK) only. The system is rounding off the quantity in standard functionalities itself while taking print out. Please give me the solution.
    Thanks once again.

    Hi,
        I think in standard 'MEDRUCK' the order quantity(RM06P-PRMG1) is printed without decimal places. Copy the MEDRUCK sapscript into a custom sapscript and change the Quantity fields declaration.
    Thanks & Regards
    Bala Krishna

  • Problem in PI Sheet Print out

    Dear PP Guys
    I am facing a problem while taking Print out of PI sheet in PDF format...
    The Contents of the PI sheet are getting out of the std A4 size paper.
    How can we fit the PI sheet content to a A4 size paper while taking print
    We are using EHP 4.0 pack and SAP R/3 ECC6.4
    Regds
    RB

    hi Kunal
    The solution i identified for this error ,
    If i give some othere number in serial number display befor goint to printer selection screen
    Its not showing any error .
    but if i giv same challan number in serial number befor printer selection screen , then its showing error
    If u have any idea , y its not allowing , ..?? u can explain me
    Thanks

  • PO PRINT OUT DIFFICULTIES

    Dear SAP MMIANS,
    Here i a facing problem while po print out . in material master creation we have given description for the said material in purchase order text. but it is not appearing in po print out.bcs it is important to vendor know the details of item.
    ex; we create a LAMP as material the description of this lamp i.e brand , type, voltage , wattage be mentioned in purchasing text in material master . but it is not appearing in po print out .
    thanks regards,
    srinivas kona

    Pls check whether there is NO MATERIAL TEXT indicator selected in the PIR for Vendor/Mtrl combination...
    Due to this mostly it happens,...
    Regards
    Priyanka.P
    AWARD IF HELPFULL
    Edited by: Priyanka Paltanwale on Sep 1, 2008 12:47 PM

  • Print out of Schedule Lines & Material reqt at subcontractor end.

    Hi experts,
    Presently we are using ME9E report for taking print out of scheduling agreement.  In scheduling agreement, material wise / date wise R.M requirement at Subcontractor end is displayed as well as schedule lines material wise / date wise is displayed. 
    We do not find it user friendly.  We are searching for following reports :
    1. Datewise / Material wise requirement of R.M at subcontractor end should be displayed separately.
    2. Schedule line qty date wise / material wise  should be displayed separately.
    Solutions / Suggestions will be highly appreciated.
    Regards,
    ( Rajneesh Gulati )

    hi,
    pl go with Y program

  • Print out issue for Goods issue document

    Dear Friends,
    I am trying to take a print out for good issue document (Mov. 541)
    -     Necessary settings have been done in customizing of output details WA01 with print parameters Plant/storage location (also maintained same at config. level)
    -     MN21 master data maintained but every time I have to define output device by changing the document details in MB02
    -     When taking print out inMB90 system proposes no document found for processing
    Can anybody help in this regards
    SG

    If the output TYPE is configured, and created in MN21 but the output record is not automatically created for each document, you may be missing config in <B>Output Determination</B>.  (In MM02, you can select the output type from a drop-down and process without error)<BR><BR>Please check the following:<BR><BR>SPRO path: <I>Materials Management > Inventory Management and Physical Inventory > Output Determination > Maintain Output Determination Procedures.</I> <BR><BR>Your output type must be assigned to the procedure used by your document. If it is not here, it will not automatically propose the output record.

Maybe you are looking for