Dump file has larger size than the import location

Hi,
Im very new to Export and Import level logical backup.
I have an export file which is around 80GB of space in my database say(dev db),I just need to import the same file into another schema in another database say(testdb)which has no adequate space to import.
So What are all the steps i need to perform inorder to import the exported file .
I'm using RHEL4 OS
Oracle 11.2.0.2
Kindly advice me on this.
Thanks in advance
Regards,
Faiz

Hello,
It may be a way.
You may pre-create the Default Tablespace used by the User/Schema of the Target Database with the option COMPRESS FOR OLTP:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17120/tspaces002.htm#CIHGCFBB
Then, assuming you use DATAPUMP, you Import with the parameter below so that the imported Tables can inherit from the option of the Schema's Default Tablespace:
transform=segment_attribute:n:tableBut, there's no warranty about the compression rate.
So, as previously posted, it would be better to get enough place on the Target Database.
Hope this help.
Best regards,
Jean-Valentin

Similar Messages

Whenever you try to save a PDF file to a location other than the default location ('My Documents'), Firefox freezes & you have to go to the 'Task Manager' to exit Firefox and stop the error, so you can load Firefox again.

Whenever you try to save a PDF file to a location other than the default location ('My Documents'), Firefox freezes & you have to go to the 'Task Manager' to exit Firefox and stop the error. I have Windows XP (Media Center Edition) and all updates (Firefox, Adobe PDF, Microsoft, virus protection, etc) are installed. This has only been a problem since Firefox 4, and isn't a problem in Internet Explorer.

Hi David,
Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
Do you have any stored preferences for PDF files in Firefox?
*[[Applications panel - Set how Firefox handles different types of files]]

Export dump file of 8.x unable to Import in 9i

Hi,
I have Oracle 8.x version export dump file.
When i try to import this file in Oracle 9i db, it fails everytime. I have tried with all possible options in import utility. When i start import it shows as a active jobs in the jobs list but after few seconds it disappears from active tab and goes to failed list. It doesnot even gives the reason for failure. No error messages also. I don't know what shoud i do as i want to upgrade my 8.x data to 9i. I have currently only 9i installed on windows 2000 Server.
Please reply to my query as sson as possible.
Thanks

i beleive, u are using OEM or any other tool to do the export and import.
FIRST make sure, u have configured OEM properly to handle the batch jobs.
easiest way is to use the command line utilities.
use exp of lower version to export the source database.
create similiar users and tablespaces ( tablespace names is not a must) in target database.
use the same lower version of imp to import into target database.

Aperture import plug-in won't run. After examining my library the number of image files stays at "undetermined" and the import button stays greyed out. Any thoughts?

Aperture import plug-in won't run. After examining my library the number of image files stays at "undetermined" and the import button stays greyed out. Any thoughts?

Others have the same issue, with the import button being grayed out. My trail copy expired, but I believe by poking around in the options and selecting another Aperture library and re-selecting, I was able to continue.
The problem is common enough, that hopefully Adobe will address. In the mean time, try repairing your Aperture library, checking permissions, exporting a subset of your library for a test, or try putting that library subset on an external drive. (Can usually avoid permissions issues.)

Downstream server has less updates than the Upstream server.

Hi, I have a DSS (Downstream server) that syncs the metadata from a USS(Upstream server) at our place. I counted the number of updates in the database using the `IsLatestRevision` field in the revision table. They are different on both the WSUS servers.
The DSS has less updates than the USS. The query is as follows.
SELECT COUNT(*)
FROM [SUSDB].[dbo].[tbRevision]
where IsLatestRevision=1
Is this the proper way to count the number of updates, if yes, why there is a mismatch.
Please help, i am confused on this. Any help appreciated.

Hi Suraj,
is the downstream server configured in autonomous mode (the default), or is it in replica mode? It's only in replica mode that all of the updates will be replicated.
If you find the answer of assistance please "Vote as Helpful"and/or "Mark as Answer" where applicable. This helps others to find solutions for there issues, and recognises contributions made to the community :)

The error threshold has been exceeded. The receive location is shutting down

I am doing polling using SQL adapter......For small records polling is succesful......but for large recorde i am getting following error..
The receive location "RcvSqlDataLoc" with URL "" is shutting down. Details:"The error threshold has been exceeded. The receive location is shutting down.".

Hi
You might have resolved this issue, However I would not read all those records in one go! Instead I would read them in batches and pass to BizTalk.
I would use
Scatter and Gather Pattern to distribute the records to multiple orchestration instance for processing and execute them using more than one BizTalk host instance?
If you have already resolved the issue, Then it would be great if you share the solution with us!
HTH,
Naushad Alam (MCC,MCTS,BizTalk Server)
If this is helpful or answers your question - please
mark accordingly!
alamnaushad.wordpress.com|
My new TechNet Wiki
"BizTalk Server: Performance Tuning & Optimization"

"This file cannot be exported to the selected location" Error always appear

Dear All,
when am trying to Export an excel sheet as a contract file, i click save as and i get the error ( This file cannot be exported to the selected location ) on some clients computers not all of them, any advice please?
Regards

The vast majority of the time, when user interface issues present in Contract Management, it is due to an incompatible Java Runtime Environment (JRE) installed on the client machine.
Each version of Contract Management has a Tested Configurations document.
Proactively ensuring client configuration specifications conform to those outlined in the Tested Configurations document, will enable Contract Management to function as designed, without negative impact to user productivity.
Additional References:
I. Contract Management documentation including Tested Configurations is available on the Oracle Technology Network:
http://www.oracle.com/technetwork/documentation/primaverapcm-087479.html
See Client & Browser tab in Tested Configurations document.
II. My Oracle Support > KnowledgeBase Note 897644.1 - Nothing Happens When Clicking: All Projects > Customize Text, or Folders, or Administer Views > Modify or Advanced Print lists many commonly encountered issues when the JRE on the client is not compatible with Contract Management. This note also lists certified JRE versions and includes a link where to download the correct JRE, as needed.

Non-image files are not copied to the Backup Location

I'm on Aperture 3.0.3... I just noticed that non-image files (e.g., WAV files) are not copied into the Backup Location, although they are copied into the main folder location during an import. Does anyone else see this behavior?

Shawnsat,
Yes you can still stream from the host computer, the knowledge base article that describes this is http://docs.info.apple.com/article.html?artnum=305098. If you are attempting to display Photos on Apple TV, they must be synced to the Apple TV, per knowledge base article http://docs.info.apple.com/article.html?artnum=305139.
Cheers,
John

File is not picking from the source location.

Hi all,
File is not picking from the source location. FTP is working properly and file is also placed in source location. I am new the XI, if anybody can give me the solution it would be really helpfull.
Thanks to all.
Korean

Hi Majin,
Check the folder path properly, check the file name( file name is case sensitive) you have given correct or not. See that your communication channel is active. Also check the cache status and check adapter status also by that you will come to know wht is the problem.
Thanks,
Ranjeeth.

8 MB dump file is becoming more than 10GB after importing

Hi,
I have got a dump to load into the database. the Dump file size was only about 8MB
But while importing it to a database it is becaming more than 10GB.
I have given extend up to 10GB. So that Import command was terminated with an error.
Now, What may be the problem and how to rectify that.
Kindly Suggest.
Thanks in advance
Regards
Gatha

Hi,
The oracle version is 10.2.0.1
Data has been imported using IMP command.
Since the tablespace has been filled it shows an error
IMP-00017: following statement failed with ORACLE error 1658:
"CREATE TABLE "USTTAXTRANSACTION" ("ACCOUNT_NUM" VARCHAR2(20) NOT NULL ENABL"
"E, "BILL_SEQ" NUMBER(9, 0) NOT NULL ENABLE, "BILL_VERSION" NUMBER(3, 0) NOT"
" NULL ENABLE, "TAX_TRANSACTION_ID" NUMBER(9, 0) NOT NULL ENABLE, "UST_TAX_T"
"RANSACTION_TYPE" NUMBER(1, 0) NOT NULL ENABLE, "CUSTOMER_REF" VARCHAR2(20) "
"NOT NULL ENABLE, "BILL_TO" VARCHAR2(18), "BILL_TO_TYPE" NUMBER(9, 0), "ORIG"
"IN" VARCHAR2(18), "ORIGIN_TYPE" NUMBER(9, 0), "TERM" VARCHAR2(18), "TERM_TY"
"PE" NUMBER(9, 0), "SHIP_TO" VARCHAR2(18), "SHIP_TO_TYPE" NUMBER(9, 0), "SHI"
"P_FROM" VARCHAR2(18), "SHIP_FROM_TYPE" NUMBER(9, 0), "ORDER_ACCEPT" VARCHAR"
"2(18), "ORDER_ACCEPT_TYPE" NUMBER(9, 0), "TAXATION_DAT" DATE NOT NULL ENABL"
"E, "TAXABLE_AMOUNT_MNY" NUMBER(18, 0), "EVENT_MINUTES" NUMBER(9, 0), "UST_C"
"ATEGORY_ID" NUMBER(9, 0) NOT NULL ENABLE, "UST_CODE_ID" NUMBER(9, 0) NOT NU"
"LL ENABLE, "UST_CHARGE_GROUP_ID" NUMBER(9, 0) NOT NULL ENABLE, "UST_INCITY_"
"BOO" VARCHAR2(1) NOT NULL ENABLE, "BUSINESS_BOO" VARCHAR2(1), "ENDCUST_BOO""
" VARCHAR2(1), "REGULATED_BOO" VARCHAR2(1), "DEBIT_CARD_BOO" VARCHAR2(1), "N"
"UMBER_OF_LINES" NUMBER(9, 0), "NUMBER_OF_LOCATIONS" NUMBER(9, 0), "FEDERAL_"
"EXEMPT_BOO" VARCHAR2(1), "STATE_EXEMPT_BOO" VARCHAR2(1), "COUNTY_EXEMPT_BOO"
"" VARCHAR2(1), "CITY_EXEMPT_BOO" VARCHAR2(1), "EVENT_SOURCE" VARCHAR2(40), "
""LEVYING_PERIOD_NUM" NUMBER(3, 0), "EXTERNAL_TRANSACTION_ATTRS" VARCHAR2(40"
")) PCTFREE 10 PCTUSED 40 INITRANS 19 MAXTRANS 255 STORAGE(INITIAL 65536 FR"
"EELISTS 23 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) "
" LOGGING NOCOMPRESS"
IMP-00003: ORACLE error 1658 encountered
ORA-01658: unable to create INITIAL extent for segment in tablespace GENEVA
Import terminated successfully with warnings.
Kindly Help me out.
Thanks.
Regards
Gatha

.ipa file has 100 times of the the original file size

For the last 1 1/2 years I've been working on a digital songbook. Each article has audio files (2mb), overlays, pdf scores and html content.
With DPS App Builder I finally made the distribution app (.zip) and the developer app (.ipa) which I couldn't download, because the .ipa file was incredibly large and I always got the message that my macbook has not enough memory.
So I build a second folio with just 10 articles and total of approximately 20 MB file size (mp3, pdf, html content).
Now I could download the .ipa file from DPS app builder, but the file size is 2,12 GB - more than 100 times larger than the size of the files used in this 10 articles.
To be quite honest: i don't know what to do, because I never was expecting that. What big mistake do I make?

The most likely problem is that at least one of your Web Content overlays points to an .html file in a Documents folder or Desktop folder. With Web Content overlays, DPS uploads the entire contents of the folder (and all subfolders) in which the .html file appears. So check to make sure that the HTML files you link to are properly isolated.

Existing Replica MDF file size is increased in size than the New replica install

Please I need help here.I really really appreciate your help.
Here are my scenarios:
We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to
the publications on the master db.
1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs.
I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.
2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs.
I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool.
The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
Why it is allocating the space differently? This is effecting our initiall replica set up times. Any input will be greatly appreciated.
Thanks,
Asha.

https://technet.microsoft.com/en-us/library/ms151791(v=sql.110).aspx

Why do copied files show different file sizes than the original files?

When I copy files (to another drive, folder, etc.) some show the same file size as the original, but others don't.
I'm guessing this is not abnormal, but what causes it?
Thanks.

Hi dymar,
Copying to another Drive is understandable, they may have a differentnumber of Blocks allocated per file, for insnce a one Byte file might take up 512 bytes, 1024 Bytes, etc, but a Get info should show the actual size of the file within that/those blocks.
If copying to another Format, like MS-DOS, Forks may be lost also.
There are ways to actually Compare the files...
http://www.hutsby.net/2008/01/apple-mac-osx-compare-files-and-folders.html
http://www.deltopia.com/compare-merge-sync/macosx/
http://www.macworld.com/article/49584/2006/03/cmpfldr.html
http://www.araxis.com/merge_mac/index.html
Or the most expensive one & my favorite, but far more useful, Tri-Backup...
http://www.tri-edre.com/english/tribackup.html

Corrupt dump file, foreign keys not generated on import

Hi,
In our refresh job, we get the dump file from production and use it to refresh the schema in UAT.
The dump file thus we got from production seems to be corrupt - as its giving error - "IMP-00008: unrecognized statement in the export file: "
But the error we are getting is for few users, while other users are being imported fine. For the users which got imported fine, the foreign keys are missing !!!
There is no "error" in the import log regarding the foreign keys.
We tried to get the indexfile and it has all "Create Table" statements, along with indexes, primary key, check constraints etc .... only the FOREIGN KEYS are missing.
How can this be explained ?
With Regards,
Shalini.

Some suggestions:
1. Check Note:111384.1 if you are trying to import from the tape directly.
2. You can set a bigger buffer size and check whether the error reappears.
3. If you are trying to perform a full import and the error always seemed to be happening when it tried to import the 56th user, you set init.ora parameter license_max_users (which is set to 55) to a bigger value.
These are apart from the main reason for this error, i.e., corrupted export file or Import internal bug.

Animation - plays in larger size than specified

Has anyone experienced this issue, or can please advise me on
what I can do?
I have inserted several swf animations into a course, and the
animation has been specified in constraints as 300 x 300. The
constraints are also "locked" at 300 x 300.
When I run the course, the animation plays at a larger size,
"spilling" outwards in all 4 directions, so that I can see the all
the rough edges of the animation. I guess that what I see is what a
Flash programmer would see when editing the animation in Flash.
Any ideas would be great thanks!

I have to wonder what you mean by "rough edges of the
animation," and constraints locked at 300 x 300.
If you want the finished project to display at 300 x 300
pixels, then you must define that 300 x 300 area at the very
beginning. Then, only images 300 x 300 or smaller can be brought
into the project.
When you publish the project as an SWF, then it will only
display 300 x 300 pixels. The HTML file Captivate publishes along
with the SWF (assuming you allowed that) embeds the movie with the
300 x 300 dimensions within the browser. If you choose not to
publish the HTML file, then opening the SWF directly will generally
cause it to fill the browser window, as you seemed to describe.
The "rough edges" thing really has me perplexed. It's almost
as if you expect to be able to mask off a portion of the screen and
see only that masked area -- not the full dimensions of the movie.
That's definitely not possible in Captivate.
If I misunderstand what your problem is, you might try
again.

Dump file has larger size than the import location

Similar Messages

Maybe you are looking for