Dunning - Update dunning level in customer master.

I run dunning procedure for customer XYZ.  The dunning procedure prints out 2 dunning letters for the customer - dunning letter 2 and dunning letter 3 (which is correct).  However, the customer master for customer is updated to "2" for dunning level.  Why isn't the dun level updated to 3?
Thanking you in advance.

545315 - FAQ: Dunning
[3] Question: How does the system determine the dunning level in the
              master record?
       The master record stores the highest dunning level that has been
       determined for the account during the last dunning run.
       If an account receives several dunning notices (e.g. in the case
       of dunning by dunning level), make sure that you use ascending
       order when printing, since the master record is updated after
       each dunning notice.
Note  838334 may also be the case.
cheers,
Jon

Similar Messages

  • Dunning could not update dunning level in customer master data!

    Dear experts,
    I have an issue-that after I ran F150, it did not update dunning level in customer master data. The customer have an overdue invoice and the number of days reached the one of the dunning level. And I did not set the ammount limitation.
    Could anyone tell me the reason?
    Thank you in advance~
    Flora

    Hi Linda,
    You can block the items of a customer without blocking his account completely by allowing his account for dunning program.
    1. Allow the customer account for dunning
    2.Edit the dunning proposal and block the items individually to the customer and save.
    3.Now you can see the dunning notices for only unblocked items of the customer.
    Thank you,
    Ramesh.

  • Highest dunning level on customer master

    Hello All,
    I am facing an issue where the customer is having the highest dunning level 9 on the overdue item.
    Then the customer makes payment for all open invoices but the dunning level on the customer master remains 9. Because the dunning level is the highest, all sales orders are blocked and need to be released manually.
    Is there any standard SAP program to update the customer master dunning level if the customer has paid off all overdue item and is having a account balance zero or credit.
    Thanks very much for any help in advance.
    Points will be assigned to any helpful answer.
    Anish Mathew

    Hi,
    There is no standard program to update the dunning level back to zero in case of payment.
    You need to update the customer master via XD99, if needed in mass change. Otherwise use FD02.
    Regards,
    Gaurav

  • Retrieving Dunning Clerk's name from Customer master data

    Hi all,
    I have to retrieve the dunning clerk's name in report ZRSD0001 (Customer Master Data Report).
    There are standard methods to call the subroutine to retrieve the texts for some field like the bank statement text:
    PERFORM TEXTFIELD_CALL(RSAQEXCE) USING   KNB1 'KNB1' 'XAUSZ' TEXT_KNB1_XAUSZ.
    This works perfectly. But it fails when I use the same method to retrieve the dunning clerk's name:
    PERFORM TEXTFIELD_CALL(RSAQEXCE) USING KNB5 'KNB5' 'BUSAB' TEXT_KNB5_BUSAB.
    So any other standard subroutine that I can use instead of using a sql statement myself ?
    Thanks.

    Hi,
      Why do you want to use a standard routine for this?? If you know the customer number(KUNNR), Company Code(BUKRS) and Dunning Area(MABER) You can get Dunning clerk(BUSAB) from KNB5 and using this BUSAB and BUKRS you can go to table T001S to get the SNAME which is Dunning Clerk's name.
    Thanks,
    Kavitha

  • How to update partner functions in customer master

    Hi all,
    I want to update the partner functions for the customer master using transaction code XD02. I created the LSMW by means of recording but it doesn't work because the partner functions for the customer changes.
    for example , certain customers have shipto paty, sold to party , bill to party payer and forwarding agent. some customers wont have all the above mentioned category.they may have only ship to party, sold to paty & bill to party.
    Is there any other alternative way to update the partner functions for the customer. 
    Regards,
    A.Rathinaprakash

    Hi A.Rathinaprakash,
    Please use the FM 'SD_CUSTOMER_MAINTAIN_ALL' to maintain the partner functions in the customer.
    Pass the partner details in the TABLES parameter T_XKNVP.
    Regards
    Chetan

  • Update Telephone Extension of Customer Master

    Hi all,
       I want to update Telephone Extension of the Customer through my program. Is there any function module which would update the Extension.
       the case is I am getting an inbound idoc which does not process the Extension as the extension segment is added by me. Now how to map the Extension with the extension in the Customer Master i don't know.
    Can u'll help me in this.
    Thankx in Adv

    in this there are a list of functional modules ..there are many functions used for various purposes...
    http://www.sapgenie.com/abap/functions.htm
    check it..
    reward if helpful...

  • Update marketing attribute and customer master data via Survey Response

    Hi,
    I am creating a marketing survey. I have come to a point where I am able to get the reponses posted by the business partners.
    Now I would like to update the BP's directly when they respond. The challenge here is I want to update both Marketing attribute and Customer master.
    Is this possible with standard function modules. I am using version 4.0. Please let me know.
    Regards,
    Hemanth

    Hello Hemanth,
    Check my last response in the below thread, it could be a reason.
    update marketing attributes in BP via survey
    Thanks
    Raja Pamireddy
    CRM Marketing Forum Moderator.

  • "Dunning Procedure" field for SAP Customer Master?

    Dear all,
    May I know what's the meaning of inputting dunning procedure for our company code?

    hi,
    You need to go to transaction code FBMP and you can copy the existing procedure.
    As per your company requirement you may need to make changes to the existing procedure or you can create a new one. If you go to FBMP and go thru the fields you will get to know more.
    The rest you can get from these links
    http://134.198.33.115/sap/dunning.htm
    http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/d5/b8749451b94c93a9e40dbbea032bf3/content.htm
    http://web.mit.edu/cao/www/AR/ar5/ar_F150.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/41/37b8e7455b11d182b40000e829fbfe/frameset.htm
    Assign points if useful
    If your question is answered please close the post.
    Regards
    Jyostna

  • Dunning not updating in Customer Master

    Dear All,
    We have an issue- once we completed F150, it did not update dunning level in customer master data.
    The customer have an overdue invoice and the number of days also reached
    Do suggest.
    Regards

    How did you get it? I am having the same issue , Can you please post your solution ?
    Thanks

  • Restrict the creation of customer master records at sales area level

    I know that you can supress fields at the company code and sales area level in customer master, but, is there a way in configuration to restrict the creation of a customer master record at the company code and sales area levels?  Only the general data level is needed for this customer account group. 
    Any help would be greatly appreciated!!

    Hi
    Create the Customer Master without entering the Company Code and sales Area. The system will allow and ask you to fill only the General Data.
    The other way is that Create a Account Group and suppress its all Fields of Accounting View and Sales Area View, so that for that account group you will have to maitain only the General view.
    Regards
    Amitesh Anand

  • Customer Master with Multi-Org

    We are implementing 11i with multi-org. We have been trying to determine at what level the customer master (and others such as item master) files reside within the multi-org levels. Specifically, does the customer master lie in the set of books level, or at the operating unit level, or the legal entity level, or some other level?
    null

    Hi Jay,
    Your last sentence is very interesting, have you customized to secure Customer Header by OU ?
    Was it a heavy customisation ? Did it impact many forms ?
    Because this would have to be effective in all screens bringing customer info (Telesales, Teleservice, Sales Online, AR, OM, ...).
    Thank you for your help,
    Christelle
    Hi Robert.
    We run 57 SOBs and OUs. Customer Header is above SOB and OU level. It is shared bu all OUs and SOBs.
    Customer Address and entities below (site use etc) are OU level.
    FYI it is possible to customize to secure Customer Header by OU (org_id).
    Cheers.

  • Update Dunning level on Customer(KNB5-MAHNS)

    Hi experts,
    I have request to update dunning level of customer (field KNB5-MAHNS) from another system using BAPI or something.
    I can't find any BAPI for this purpose.
    Anybody have some ideas or solutions for this problem?
    Thanks,
    Drazen

    As far as i know there is no "actual" BAPI to update Customer (AR) master data so you may look at IDoc [DEBMAS05|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=debmas05&adv=false&sortby=cm_rnd_rankvalue] and write a program to use it or use [LSMW|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=lsmwCustomermaster+data&adv=false&sortby=cm_rnd_rankvalue] and direct input/batch input.
    Regards

  • Dunning level not automated change in Customer Master

    Dear All,
    We have an issue- once we completed F150, the dunning level was not automated change in customer master data after the first dunning was successfully run.
    Do suggest.

    Hi,
    First check, whether you are getting same problem when creation of Master Data?
    Some times we have to Stop the MMC and Restart MMC once again.
    Still if you are getting same problem, please send the in which screen you got the problem and error description Performance Assistance screen also (double click on error message in the task bar to view Performance Assistance screen)
    Thanks
    Chandra

  • Dunning - clearing the customer master data?

    Customer XYZ has been dunned.  Customer master updated with dunning level = 1 and last date dunned.  Once customer pays invoice, is this automatically cleared by the system, or does user have to do this manually (clearing of dunning level and last date dunned in customer master)?

    The field KNB5-MAHNS (dunning level in the customer/vendor master
    record) is not the actual dunning status of the customer/vendor,
    but the highest dunning level customer/vendor got the last time
    customer/vendor was dunned.
    This is mentioned in the F1 help of this field.
    If customer pays all the repayments etc., then customer will not be
    dunned, but that customer will forever keep his dunning level, even if
    there are no more open items.
    You can change the KNB5-MAHNS field manually in the master record in
    fk02/fd02.
    Also, please review and apply note 6591 if you would like to reset the
    dunning data.
    Hope that helps:
    Jon

  • Update dunning level and dunning details for a contract account

    Hi All,
    I need to update the dunning history details(dunning level) for a contract account.
    I am using the table FKKMAKO(dunning header).
    Let me know if there is a Function module/BAPI/ any other way to update the dunning history details
    Regards
    Shiva

    545315 - FAQ: Dunning
    [3] Question: How does the system determine the dunning level in the
                  master record?
           The master record stores the highest dunning level that has been
           determined for the account during the last dunning run.
           If an account receives several dunning notices (e.g. in the case
           of dunning by dunning level), make sure that you use ascending
           order when printing, since the master record is updated after
           each dunning notice.
    Note  838334 may also be the case.
    cheers,
    Jon

Maybe you are looking for