DUPLEX PRINTING - HP Officejet 6500 E710a-f PRINTER

My HP Officejet 6500 E710a-f is fitted with a Gadget for Duplex Printing.
That notwithstanding, the Print Settings do not provide an option for automatic Duplex Printing. The Settings only provide for a "Print One Sided" under which there is a Sub-Option that provides for "Manually Print on Both Sides" with the Intruction "Reload Paper when prompted to print the second side".
Have I perhaps looked for the Duplex Printing Option at the wrong place OR would there perhaps be something wrong with my Printer/Software?
More to the point, do I need to do anything to activate the Duplex Printing capability??

Ensure that the driver knows that a duplex unit is present on the printer (assuming that one is):
For the printer instance in question, bring up the Printer properties dialogue.
Select the Device settings tab.
Ensure that the duplex unit is set to Installed rather than Not installed.

Similar Messages

[Solved] HPLIP unable to communicate HP printer Officejet 6500 E710A-F

Hi,
I have installed PyQt, CUPS and HPLIP and their dependencies from the Arch Repo. When I run "hp-setup", it reported
warning: Qt/PyQt 4 initialization failed.
error: hp-setup requires GUI support (try running with --qt3). Also, try using interactive (-i) mode.
I ran "hp-check -t", it reported
hp-check[24505]: info: :
hp-check[24505]: info: :HP Linux Imaging and Printing System (ver. 3.13.5)
hp-check[24505]: info: :Dependency/Version Check Utility ver. 15.1
hp-check[24505]: info: :
hp-check[24505]: info: :Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
hp-check[24505]: info: :This software comes with ABSOLUTELY NO WARRANTY.
hp-check[24505]: info: :This is free software, and you are welcome to distribute it
hp-check[24505]: info: :under certain conditions. See COPYING file for more details.
hp-check[24505]: info: :
hp-check[24505]: info: :Note: hp-check can be run in three modes:
hp-check[24505]: info: :1. Compile-time check mode (-c or --compile): Use this mode before compiling the
hp-check[24505]: info: :HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
hp-check[24505]: info: :are installed to successfully compile HPLIP.
hp-check[24505]: info: :2. Run-time check mode (-r or --run): Use this mode to determine if a distro
hp-check[24505]: info: :supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
hp-check[24505]: info: :has the proper dependencies installed to successfully run.
hp-check[24505]: info: :3. Both compile- and run-time check mode (-b or --both) (Default): This mode
hp-check[24505]: info: :will check both of the above cases (both compile- and run-time dependencies).
hp-check[24505]: info: :
hp-check[24505]: info: :Check types:
hp-check[24505]: info: :a. EXTERNALDEP - External Dependencies
hp-check[24505]: info: :b. GENERALDEP - General Dependencies (required both at compile and run time)
hp-check[24505]: info: :c. COMPILEDEP - Compile time Dependencies
hp-check[24505]: info: :d. [All are run-time checks]
hp-check[24505]: info: :PYEXT SCANCONF QUEUES PERMISSION
hp-check[24505]: info: :
hp-check[24505]: info: :Status Types:
hp-check[24505]: info: : OK
hp-check[24505]: info: : MISSING - Missing Dependency or Permission or Plug-in
hp-check[24505]: info: : INCOMPAT - Incompatible dependency-version or Plugin-version
hp-check[24505]: info: :
warning: arch distro is not found in AUTH_TYPES
warning: unknown-0.0 version is not supported. Using unknown-0 versions dependencies to verify and install...
hp-check[24505]: info: :
hp-check[24505]: info: :---------------
hp-check[24505]: info: :| SYSTEM INFO |
hp-check[24505]: info: :---------------
hp-check[24505]: info: :
hp-check[24505]: info: : Kernel: 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 GNU/Linux
Host: ddreamer_S3
Proc: 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 GNU/Linux
Distribution: unknown 0.0
hp-check[24505]: info: : Bitness: 64 bit
hp-check[24505]: info: :
hp-check[24505]: info: :-----------------------
hp-check[24505]: info: :| HPLIP CONFIGURATION |
hp-check[24505]: info: :-----------------------
hp-check[24505]: info: :
hp-check[24505]: info: :HPLIP-Version: HPLIP 3.13.5
hp-check[24505]: info: :HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro 0.0 version
hp-check[24505]: info: :
hp-check[24505]: info: :Current contents of '/etc/hp/hplip.conf' file:
hp-check[24505]: info: :# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.13.5
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.13.5
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.13.5
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
hp-check[24505]: info: :
hp-check[24505]: info: :Current contents of '/var/lib/hp/hplip.state' file:
hp-check[24505]: info: :Plugins are not installed. Could not access file: 沒有此一檔案或目錄
hp-check[24505]: info: :
hp-check[24505]: info: :Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: 沒有此一檔案或目錄
hp-check[24505]: info: : <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
hp-check[24505]: info: :
hp-check[24505]: info: :--------------------------
hp-check[24505]: info: :| External Dependencies |
hp-check[24505]: info: :--------------------------
hp-check[24505]: info: :
hp-check[24505]: info: : gs Ghostscript REQUIRED 7.05 9.07 OK -
hp-check[24505]: info: : network Network-wget OPTIONAL - 1.14 OK -
hp-check[24505]: info: : dbus DBus REQUIRED - 1.6.10 OK -
hp-check[24505]: info: : scanimage Shell-Scanning OPTIONAL 1.0 1.0.23 OK -
hp-check[24505]: info: : policykit Admin-Policy-framework OPTIONAL - 0.110 OK -
hp-check[24505]: info: : xsane SANE-GUI OPTIONAL 0.9 0.998 OK -
hp-check[24505]: info: : cups CUPS REQUIRED 1.1 1.6.2 OK 'CUPS Scheduler is running'
hp-check[24505]: info: :
hp-check[24505]: info: :-------------------------
hp-check[24505]: info: :| General Dependencies |
hp-check[24505]: info: :-------------------------
hp-check[24505]: info: :
hp-check[24505]: info: : error: reportlab Python-PDF-Lib OPTIONAL 2.0 - MISSING 'reportlab needs to be installed'
hp-check[24505]: info: : libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
hp-check[24505]: info: : pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
hp-check[24505]: info: : error: pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 - MISSING 'pyqt4-dbus needs to be installed'
hp-check[24505]: info: : libjpeg JPEG-Lib REQUIRED - - OK -
hp-check[24505]: info: : libpthread POSIX-Threads-Lib REQUIRED - 2.17 OK -
hp-check[24505]: info: : python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
hp-check[24505]: info: : python-devel Python-SDK REQUIRED 2.2 3.3.2 OK -
hp-check[24505]: info: : error: pyqt4 Python-Qt4 REQUIRED 4.0 - MISSING -
hp-check[24505]: info: : cups-devel CUPS-SDK REQUIRED - 1.6.2 OK -
hp-check[24505]: info: : sane-devel SANE-SDK REQUIRED - 1.0.23 OK -
hp-check[24505]: info: : libusb USB-Lib REQUIRED - 1.0 OK -
hp-check[24505]: info: : sane Scan-Lib REQUIRED - 1.0.23 OK -
hp-check[24505]: info: : cups-image CUPS-Image-Lib REQUIRED - 1.6.2 OK -
hp-check[24505]: info: : libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK -
hp-check[24505]: info: : python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
hp-check[24505]: info: : python-notify Desktop-notifications OPTIONAL - - OK -
hp-check[24505]: info: :
hp-check[24505]: info: :------------------------------
hp-check[24505]: info: :| Compile Time Dependencies |
hp-check[24505]: info: :------------------------------
hp-check[24505]: info: :
hp-check[24505]: info: : gcc gcc-Compiler REQUIRED - 4.8.1 OK -
hp-check[24505]: info: : libtool Build-tools REQUIRED - 2.4.2 OK -
hp-check[24505]: info: : make GNU-Build-tools REQUIRED 3.0 3.82 OK -
hp-check[24505]: info: :
hp-check[24505]: info: :----------------------
hp-check[24505]: info: :| Python Extentions |
hp-check[24505]: info: :----------------------
hp-check[24505]: info: :
hp-check[24505]: info: : cupsext CUPS-Extension REQUIRED - 3.13.5 OK -
hp-check[24505]: info: : pcardext PhotoCard-Extension REQUIRED - 3.13.5 OK -
hp-check[24505]: info: : hpmudext IO-Extension REQUIRED - 3.13.5 OK -
hp-check[24505]: info: :
hp-check[24505]: info: :-----------------------
hp-check[24505]: info: :| Scan Configuration |
hp-check[24505]: info: :-----------------------
hp-check[24505]: info: :
hp-check[24505]: info: : error: hpaio HPLIP-SANE-Backend REQUIRED - 3.13.5 MISSING 'hpaio not found in /etc/sane.d/dll.conf. hpaio needs to be added in this file.'
hp-check[24505]: info: : scanext Scan-SANE-Extension REQUIRED - 3.13.5 OK -
hp-check[24505]: info: :
hp-check[24505]: info: :------------------------------
hp-check[24505]: info: :| DISCOVERED SCANNER DEVICES |
hp-check[24505]: info: :------------------------------
hp-check[24505]: info: :
hp-check[24505]: info: :device `v4l:/dev/video0' is a Noname HD WebCam virtual device
hp-check[24505]: info: :
hp-check[24505]: info: :--------------------------
hp-check[24505]: info: :| DISCOVERED USB DEVICES |
hp-check[24505]: info: :--------------------------
hp-check[24505]: info: :
hp-check[24505]: info: :No devices found.
hp-check[24505]: info: :
hp-check[24505]: info: :---------------------------------
hp-check[24505]: info: :| INSTALLED CUPS PRINTER QUEUES |
hp-check[24505]: info: :---------------------------------
hp-check[24505]: info: :
hp-check[24505]: info: :
hp-check[24505]: info: :Officejet_6500_E710a-f
hp-check[24505]: info: :----------------------
hp-check[24505]: info: :Type: Printer
hp-check[24505]: info: :Device URI: hp:/net/Officejet_6500_E710a-f?zc=HP61A705
hp-check[24505]: info: :PPD: /etc/cups/ppd/Officejet_6500_E710a-f.ppd
hp-check[24505]: info: :PPD Description: HP Officejet 6500 e710a-f hpijs, 3.13.5
hp-check[24505]: info: :Printer status: printer Officejet_6500_E710a-f is idle. enabled since 西元2013年06月22日 (週六) 23時23分50秒
error: Unable to communicate with device (code=12): hp:/net/Officejet_6500_E710a-f?zc=HP61A705
error: unable to open channel
error: Communication status: Failed
hp-check[24505]: info: :
hp-check[24505]: info: :Officejet_6500_E710a-f_fax
hp-check[24505]: info: :--------------------------
hp-check[24505]: info: :Type: Fax
hp-check[24505]: info: :Device URI: hpfax:/net/Officejet_6500_E710a-f?zc=HP61A705
hp-check[24505]: info: :PPD: /etc/cups/ppd/Officejet_6500_E710a-f_fax.ppd
hp-check[24505]: info: :PPD Description: HP Fax4 hpcups
hp-check[24505]: info: :Printer status: printer Officejet_6500_E710a-f_fax is idle. enabled since 西元2013年06月22日 (週六) 23時24分08秒
error: Unable to communicate with device (code=12): hpfax:/net/Officejet_6500_E710a-f?zc=HP61A705
error: unable to open channel
error: Communication status: Failed
hp-check[24505]: info: :
hp-check[24505]: info: :
hp-check[24505]: info: :--------------
hp-check[24505]: info: :| PERMISSION |
hp-check[24505]: info: :--------------
hp-check[24505]: info: :
hp-check[24505]: info: :groups user-groups Required - - OK root bin daemon sys adm disk lp wheel log
hp-check[24505]: info: :
hp-check[24505]: info: :-----------
hp-check[24505]: info: :| SUMMARY |
hp-check[24505]: info: :-----------
hp-check[24505]: info: :
hp-check[24505]: info: :Missing Required Dependencies
hp-check[24505]: info: :-----------------------------
error: 'hpaio' package is missing/incompatible
hp-check[24505]: info: :
hp-check[24505]: info: :Missing Optional Dependencies
hp-check[24505]: info: :-----------------------------
hp-check[24505]: info: :None
hp-check[24505]: info: :
hp-check[24505]: info: :Total Errors: 6
hp-check[24505]: info: :Total Warnings: 1
hp-check[24505]: info: :
hp-check[24505]: info: :Re-run 'hp-doctor' command to prompt and fix the issues.
hp-check[24505]: info: :
hp-check[24505]: info: :Done.
Seems that I have to install pyqt4-dbus, but "pacman -S pyqt4-dbus" gave an error message that no package found.
You may suggest me to run hp-setup in an text-mode by "hp-setup -i". I have gone through that without any error message. Somehow, hplip still couldn't communicate with the printer. That's why I try to set up the printer in a graphic mode.
I just don't know how to setup the GUI mode for hplip. I have spent 2 whole days. Any useful help is appreciated.
Last edited by ddreamer (2013-06-26 17:38:42)

pyqt and python2-gobject2 have been installed. python-pyqt4 cannot be found in repo.
Installing python2-qt showed
Lots of curl errors: Not Found
curl: (22) The requested URL returned error: 404 Not Found
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: ftp.tsukuba.wide.ad.jp
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
curl: (22) The requested URL returned error: 404 Not Found
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:01 --:--:-- 0
curl: (22) The requested URL returned error: 404 Not Found
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
curl: (22) The requested URL returned error: 404 Not Found
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:01 --:--:-- 0
curl: (22) The requested URL returned error: 404 Not Found
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2547k 100 2547k 0 0 629k 0 0:00:04 0:00:04 --:--:-- 629k
(2/2) 正在檢查鑰匙圈中的鑰匙 [#####################] 100%
(2/2) 正在檢查軟體包完整性 [#####################] 100%
錯誤：python2-sip: signature from "Andrea Scarpino (Arch Linux) <[email protected]>" is invalid
:: /var/cache/pacman/pkg/python2-sip-4.14.6-1-x86_64.pkg.tar.xz 檔案毀損(套件不正確或損毀 (PGP 簽章))。
你要刪除它嗎? [Y/n]
This is my pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
#UseDelta = 0.7
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#Color
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist
#[multilib]
#Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs
[archlinuxfr]
SigLevel = Never
Server = http://repo.archlinux.fr/$arch
This is my /etc/pacman.d/mirrorlist
## Arch Linux repository mirrorlist
## Sorted by mirror score from mirror status page
## Generated on 2013-05-01
Server = http://archlinux.cs.nctu.edu.tw/$repo/os/$arch
Server = http://ftp.tku.edu.tw/Linux/ArchLinux/$repo/os/$arch
Server = http://lug.mtu.edu/archlinux/$repo/os/$arch
Server = http://archlinux.polymorf.fr/$repo/os/$arch
## Score: 0.5, Germany
Server = http://mirror.de.leaseweb.net/archlinux/$repo/os/$arch
## Score: 0.5, Netherlands
Server = http://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch
## Score: 0.5, France
Server = http://archlinux.polymorf.fr/$repo/os/$arch
## Score: 0.5, Poland
Server = http://mirror.chmuri.net/archmirror/$repo/os/$arch
## Score: 0.7, Germany
Server = http://ftp.tuxdroid.org/archlinux/$repo/os/$arch
## Score: 0.7, United States
Server = http://lug.mtu.edu/archlinux/$repo/os/$arch
## Score: 0.7, Germany
Server = http://archlinux.limun.org/$repo/os/$arch
## Score: 0.8, Belarus
Server = http://mirror.datacenter.by/pub/archlinux/$repo/os/$arch
## Score: 0.9, United States
Server = http://hive.ist.unomaha.edu/archlinux/$repo/os/$arch
## Score: 0.9, United Kingdom
Server = http://mirror.bytemark.co.uk/archlinux/$repo/os/$arch
## Score: 0.9, Germany
Server = http://mirror.1favre.de/$repo/os/$arch
## Score: 0.9, Germany
Server = http://mirror.unitedcolo.de/archlinux/$repo/os/$arch
## Score: 0.9, France
Server = http://miroir.ezvan.fr/archlinux/$repo/os/$arch
## Score: 0.9, Germany
Server = http://mirrors.n-ix.net/archlinux/$repo/os/$arch
## Score: 0.9, Netherlands
Server = http://arch.apt-get.eu/$repo/os/$arch
## Score: 0.9, United Kingdom
Server = http://archlinux.mirrors.uk2.net/$repo/os/$arch
## Score: 0.9, Germany
Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
## Score: 1.0, Greece
Server = http://foss.aueb.gr/mirrors/linux/archlinux/$repo/os/$arch
## Score: 1.0, United States
Server = http://mirror.rit.edu/archlinux/$repo/os/$arch
## Score: 1.0, Italy
Server = http://archlinux.openlabto.org/archlinux/$repo/os/$arch
## Score: 1.0, Germany
Server = http://mirror.selfnet.de/archlinux/$repo/os/$arch
## Score: 1.0, Taiwan, Province of China
Server = http://ftp.tku.edu.tw/Linux/ArchLinux/$repo/os/$arch
## Score: 1.0, France
Server = http://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/$arch
## Score: 1.0, Sweden
Server = http://ftp.lysator.liu.se/pub/archlinux/$repo/os/$arch
## Score: 1.0, Denmark
Server = http://mirrors.dotsrc.org/archlinux/$repo/os/$arch
## Score: 1.1, United States
Server = http://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
## Score: 1.1, Poland
Server = http://ftp.vectranet.pl/archlinux/$repo/os/$arch
## Score: 1.1, Netherlands
Server = http://fruk.org/archlinux/$repo/os/$arch
## Score: 1.1, Austria
Server = http://mirror1.htu.tugraz.at/archlinux/$repo/os/$arch
## Score: 1.2, Switzerland
Server = http://archlinux.puzzle.ch/$repo/os/$arch
## Score: 1.2, Czech Republic
Server = http://mirror.vpsfree.cz/archlinux/$repo/os/$arch
## Score: 1.2, Netherlands
Server = http://ftp.snt.utwente.nl/pub/os/linux/archlinux/$repo/os/$arch
## Score: 1.2, Russian Federation
Server = http://mirror.yandex.ru/archlinux/$repo/os/$arch
## Score: 1.2, France
Server = http://mir.archlinux.fr/$repo/os/$arch
## Score: 1.2, Norway
Server = http://mirror.archlinux.no/$repo/os/$arch
## Score: 1.3, Germany
Server = http://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch
## Score: 1.4, Belgium
Server = http://archlinux.mirror.kangaroot.net/$repo/os/$arch
## Score: 1.4, Australia
Server = http://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch
## Score: 1.4, Germany
Server = http://ftp.neutrinopower.de/archlinux/$repo/os/$arch
## Score: 1.4, Brazil
Server = http://www.las.ic.unicamp.br/pub/archlinux/$repo/os/$arch
## Score: 1.5, Germany
Server = http://mirror.michael-eckert.net/archlinux/$repo/os/$arch
## Score: 1.6, Japan
Server = http://ftp.jaist.ac.jp/pub/Linux/ArchLinux/$repo/os/$arch
## Score: 1.6, Germany
Server = http://mirror.fluxent.de/archlinux/$repo/os/$arch
## Score: 1.6, United States
Server = http://mirror.nexcess.net/archlinux/$repo/os/$arch
## Score: 1.6, United States
Server = http://mirrors.cat.pdx.edu/archlinux/$repo/os/$arch
## Score: 1.6, Macedonia, The Former Yugoslav Republic of
Server = http://arch.linux.net.mk/archlinux/$repo/os/$arch
## Score: 1.6, Brazil
Server = http://pet.inf.ufsc.br/mirrors/archlinux/$repo/os/$arch
## Score: 1.6, Germany
Server = http://mirror.netcologne.de/archlinux/$repo/os/$arch
## Score: 1.7, Belarus
Server = http://ftp.byfly.by/pub/archlinux/$repo/os/$arch
## Score: 1.7, Finland
Server = http://mirror.archlinux.fi/archlinux/$repo/os/$arch
## Score: 1.7, United States
Server = http://cake.lib.fit.edu/archlinux/$repo/os/$arch
## Score: 1.7, United States
Server = http://mirror.umd.edu/archlinux/$repo/os/$arch
## Score: 1.7, Worldwide
Server = http://mirror.brainfork.me/archlinux/$repo/os/$arch
## Score: 1.7, Sweden
Server = http://ftp.portlane.com/pub/os/linux/archlinux/$repo/os/$arch
## Score: 1.7, Brazil
Server = http://archlinux.c3sl.ufpr.br/$repo/os/$arch
## Score: 1.8, Hungary
Server = http://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/$arch
## Score: 1.8, United States
Server = http://www.gtlib.gatech.edu/pub/archlinux/$repo/os/$arch
## Score: 1.9, United States
Server = http://mirror.jmu.edu/pub/archlinux/$repo/os/$arch
## Score: 1.9, United States
Server = http://archlinux.surlyjake.com/archlinux/$repo/os/$arch
## Score: 1.9, United States
Server = http://mirrors.aggregate.org/archlinux/$repo/os/$arch
## Score: 1.9, United States
Server = http://mirror.cc.columbia.edu/pub/linux/archlinux/$repo/os/$arch
## Score: 1.9, Czech Republic
Server = http://archlinux.mirror.dkm.cz/pub/archlinux/$repo/os/$arch
## Score: 1.9, Germany
Server = http://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch
## Score: 2.0, Luxembourg
Server = http://archlinux.mirror.root.lu/$repo/os/$arch
## Score: 2.0, Canada
Server = http://archlinux.mirror.rafal.ca/$repo/os/$arch
## Score: 2.0, Latvia
Server = http://archlinux.goodsoft.lv/$repo/os/$arch
## Score: 2.1, United Kingdom
Server = http://mirror.cinosure.com/archlinux/$repo/os/$arch
## Score: 2.3, United States
Server = http://mirrors.liquidweb.com/archlinux/$repo/os/$arch
## Score: 2.3, Canada
Server = http://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/$arch
## Score: 2.3, United Kingdom
Server = http://mirror.lividpenguin.com/pub/archlinux/$repo/os/$arch
## Score: 2.3, Australia
Server = http://ftp.swin.edu.au/archlinux/$repo/os/$arch
## Score: 2.4, Israel
Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/$arch
## Score: 2.5, Finland
Server = http://mirror.academica.fi/archlinux/$repo/os/$arch
## Score: 2.5, Viet Nam
Server = http://mirror-fpt-telecom.fpt.net/archlinux/$repo/os/$arch
## Score: 2.5, Germany
Server = http://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch
## Score: 2.5, Colombia
Server = http://www.laqee.unal.edu.co/archlinux/$repo/os/$arch
## Score: 2.6, Italy
Server = http://mirrors.prometeus.net/archlinux/$repo/os/$arch
## Score: 2.6, United States
Server = http://mirrors.kernel.org/archlinux/$repo/os/$arch
## Score: 2.7, Estonia
Server = http://ftp.eenet.ee/pub/archlinux/$repo/os/$arch
## Score: 2.7, Norway
Server = http://archlinux.uib.no/$repo/os/$arch
## Score: 2.7, Netherlands
Server = http://mirror.i3d.net/pub/archlinux/$repo/os/$arch
## Score: 2.7, Greece
Server = http://ftp.otenet.gr/linux/archlinux/$repo/os/$arch
## Score: 2.8, Serbia
Server = http://mirror.pmf.kg.ac.rs/archlinux/$repo/os/$arch
## Score: 3.0, United States
Server = http://mirrors.gigenet.com/archlinux/$repo/os/$arch
## Score: 3.1, United States
Server = http://mirror.ancl.hawaii.edu/linux/archlinux/$repo/os/$arch
## Score: 3.2, Greece
Server = http://ftp.ntua.gr/pub/linux/archlinux/$repo/os/$arch
## Score: 3.2, Greece
Server = http://ftp.cc.uoc.gr/mirrors/linux/archlinux/$repo/os/$arch
## Score: 3.2, Portugal
Server = http://ftp.rnl.ist.utl.pt/pub/archlinux/$repo/os/$arch
## Score: 3.2, United States
Server = http://mirrors.rutgers.edu/archlinux/$repo/os/$arch
## Score: 3.3, China
Server = http://mirrors.neusoft.edu.cn/archlinux/$repo/os/$arch
## Score: 3.4, China
Server = http://mirror.bjtu.edu.cn/archlinux/$repo/os/$arch
## Score: 3.5, China
Server = http://mirror6.bjtu.edu.cn/archlinux/$repo/os/$arch
## Score: 3.6, China
Server = http://mirrors.tuna.tsinghua.edu.cn/archlinux/$repo/os/$arch
## Score: 3.6, United States
Server = http://cosmos.cites.illinois.edu/pub/archlinux/$repo/os/$arch
## Score: 3.6, Germany
Server = http://linux.rz.rub.de/archlinux/$repo/os/$arch
## Score: 3.8, Germany
Server = http://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch
## Score: 3.8, Sweden
Server = http://ftp.df.lth.se/pub/archlinux/$repo/os/$arch
## Score: 3.9, Ireland
Server = http://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/$arch
## Score: 4.0, Kazakhstan
Server = http://archlinux.kz/$repo/os/$arch
## Score: 4.1, United States
Server = http://mirrors.lax1.thegcloud.com/arch/$repo/os/$arch
## Score: 4.1, South Africa
Server = http://ftp.wa.co.za/pub/archlinux/$repo/os/$arch
## Score: 4.1, Romania
Server = http://mirror.archlinux.ro/archlinux/$repo/os/$arch
## Score: 4.1, France
Server = http://mirror.archlinux.ikoula.com/archlinux/$repo/os/$arch
## Score: 4.4, Bulgaria
Server = http://archlinux.igor.onlinedirect.bg/$repo/os/$arch
## Score: 4.8, Singapore
Server = http://mirror.nus.edu.sg/archlinux/$repo/os/$arch
## Score: 4.8, New Caledonia
Server = http://archlinux.nautile.nc/archlinux/$repo/os/$arch
## Score: 4.8, Australia
Server = http://mirror.optus.net/archlinux/$repo/os/$arch
## Score: 5.0, United Kingdom
Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/$arch
## Score: 5.1, Sweden
Server = http://ftp.availo.se/archlinux/$repo/os/$arch
## Score: 5.1, France
Server = http://archlinux.mirrors.ovh.net/archlinux/$repo/os/$arch
## Score: 5.2, New Zealand
Server = http://mirror.xnet.co.nz/pub/archlinux/$repo/os/$arch
## Score: 5.2, Russian Federation
Server = http://mirror.rol.ru/archlinux/$repo/os/$arch
## Score: 5.5, China
Server = http://mirrors.stuhome.net/archlinux/$repo/os/$arch
## Score: 5.5, China
Server = http://mirrors.ustc.edu.cn/archlinux/$repo/os/$arch
## Score: 5.5, India
Server = http://mirror.cse.iitk.ac.in/archlinux/$repo/os/$arch
## Score: 5.7, China
Server = http://mirrors6.ustc.edu.cn/archlinux/$repo/os/$arch
## Score: 6.8, United States
Server = http://ftp.osuosl.org/pub/archlinux/$repo/os/$arch
## Score: 7.4, United States
Server = http://mirrors.xmission.com/archlinux/$repo/os/$arch
## Score: 7.4, Australia
Server = http://mirror.internode.on.net/pub/archlinux/$repo/os/$arch
## Score: 7.4, Spain
Server = http://sunsite.rediris.es/mirror/archlinux/$repo/os/$arch
## Score: 7.5, China
Server = http://mirrors.163.com/archlinux/$repo/os/$arch
## Score: 7.6, Japan
Server = http://ftp.tsukuba.wide.ad.jp/Linux/archlinux/$repo/os/$arch
## Score: 7.9, Taiwan, Province of China
Server = http://archlinux.cs.nctu.edu.tw/$repo/os/$arch
## Score: 8.6, Turkey
Server = http://ftp.linux.org.tr/archlinux/$repo/os/$arch
## Score: 8.7, United States
Server = http://mirror.metrocast.net/archlinux/$repo/os/$arch
## Score: 8.8, Ukraine
Server = http://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/$arch
## Score: 9.4, Indonesia
Server = http://mirror.unej.ac.id/archlinux/$repo/os/$arch
## Score: 10.2, United States
Server = http://archlinux.supsec.org/$repo/os/$arch
## Score: 12.5, Germany
Server = http://artfiles.org/archlinux.org/$repo/os/$arch
## Score: 12.5, Kazakhstan
Server = http://mirror.neolabs.kz/archlinux/$repo/os/$arch
## Score: 12.6, Australia
Server = http://ftp.iinet.net.au/pub/archlinux/$repo/os/$arch
## Score: 12.7, Netherlands
Server = http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/$repo/os/$arch
## Score: 12.7, Germany
Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch
## Score: 12.9, Canada
Server = http://archlinux.mirror.vexxhost.com/$repo/os/$arch
## Score: 12.9, Ukraine
Server = http://mirrors.mithril.org.ua/linux/archlinux/$repo/os/$arch
## Score: 13.1, Germany
Server = http://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch
## Score: 13.3, Spain
Server = http://osl.ugr.es/archlinux/$repo/os/$arch
## Score: 13.3, Sweden
Server = http://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/$arch
## Score: 13.4, Germany
Server = http://ftp.uni-bayreuth.de/linux/archlinux/$repo/os/$arch
## Score: 13.6, Slovakia
Server = http://mirror.lnx.sk/pub/linux/archlinux/$repo/os/$arch
## Score: 15.3, Korea, Republic of
Server = http://ftp.kaist.ac.kr/ArchLinux/$repo/os/$arch
## Score: 16.6, Chile
Server = http://mirror.archlinux.cl/$repo/os/$arch
## Score: 22.4, Uzbekistan
Server = http://mirrors.st.uz/archlinux/$repo/os/$arch
## Score: 58.1, Sri Lanka
Server = http://mirror.learn.ac.lk/archlinux/$repo/os/$arch
Why should I do ?

Duplexing unit for Officejet 6500

I've got hold of an Officejet 6500 to take to university with me next month. I'm thinking that a duplexing unit would be useful but HP UK don't have any and I can't find any online elsewhere (except HP USA, which would be a bit too expensive I reckon). The part number is CB057-67001, anyone know of a place where I might be able to get hold of one?

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system is this?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Officejet 6500 wakes up and don't go to sleep again

I have an Officejet 6500 E710a-f on my office, and it's connected by LAN to the router.
My PC is connected by LAN to the router.
My laptop is connected by WIRELESS to the router.
During day time, everything works like a charm. Sometimes the printer goes to sleep, wakes up when printing or receiving faxes, etc.
At the end of the day, I turn off PC and laptop and go home. The router stays ON.
When I arrive in the morning, the printer is awake...
No faxes received, no pcs turned on...
Already flashed last firmware, can't think of anything else.
Any ideas?

You have an option to turn off sleep mode.
Press set up(wrench icon) on printer front panel, go to preferences (5) ,then go to energy save mode to turn it off.
You will have to manually turn off the printer if not in use to conserve energy.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Officejet 6500 duplex printing paper jam

Every time I run duplex printing, paper stucks inside duplexing unit. It just gets smashed.
Is there a solution for that?

I have just bought an OfficeJet 6500 and am also having major problems if I try to use automatic duplex printing. The first side prints ok then waits a while to dry but when it tries to print the second side the printer jams every time. When I remove the duplexing unit the paper is always concertina'ed between the unit and the rollers inside the printer. If anyone can point me in the right direction I'd be really grateful! This is one of the features I was hoping to make use of.

OfficeJet 6500 709n and MicroSoft Office 2010 duplex print problem

I have an OfficeJet 6500 709n and was able to automatically duplex print with Windows 2003 no problems. I upgraded to Windows 2010 and now it won't see the automatic duplex printing. I can only select single page printing and manual duplex printing. Any ideas what I need to correct???? HELP PLEASE!!

Hello,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Wireless officejet 6500 duplex printing issue

duplex printing works fine until i have a document that is 6, 8, 10 pages long. that's when duplex printing would be the most efficient. but after 2-4 pages, it stops, the printer displays a "print cancelled" message & i have to start over where it left off. then i can get another 2-4 pages.
i recently did my win7 upgrade (from vista) but that has not helped any.
what makes it stop in the middle??

I have just bought an OfficeJet 6500 and am also having major problems if I try to use automatic duplex printing. The first side prints ok then waits a while to dry but when it tries to print the second side the printer jams every time. When I remove the duplexing unit the paper is always concertina'ed between the unit and the rollers inside the printer. If anyone can point me in the right direction I'd be really grateful! This is one of the features I was hoping to make use of.

Officejet 6500 E709 Double-sided printing to Mac OS 10.9.2

I am switching from a Windows PC to the MAC, and I no longer have an option to print double-sided listed in my print menu. I am using driver version 4.1.2. Is there a different driver or another way to get the ability to print double-sided on the Mac? Thank you very much for any help!!

After reading other questions, I thought I should expand on my question above. My Officejet 6500 is not a duplex printer. My Windows print driver/interface had a two-sided print option that allowed one to print the odd pages first and then prompted me on how to orient the pages and reinsert them into the printer for printing of the even pages. On my Mac, I do not have such a software option to enable one to print two-sided in two printer passes. Thanks for any help!

HP Officejet 6500 won't print in black

I noticed that my black ink started to streak so I replaced the black ink cartridge, cleaned printheads, and completed an alignment page. All the colors showed on the test pages, except black, and the black characters that did show up were incomplete and streaked. I tried printing in black and white, and the pages shoot out of the printer blank. I've exhausted all the trouble shooting on HP and have had no luck. Any ideas about what else I can try?
This question was solved.
View Solution.

There are 5 different versions of the Officejet 6500. I went with a basic model (E710a) to supply a troubleshooting quality document for poor printer output. This link will give troubleshooting steps to try and resolve the issue it lists some that you have mentioned doing but there are steps that listed that were not mentioned in the above post.
If still having the problem, I would do a manual cleaning of the contacts on the printhead and on the print cartridges to ensure that build up is not an issue. Pages 117-121 of the user manual outline the print head cleaning process. Page 234 in the manual gives instructions to clean the contacts on the cartridges too. I hope that this helps
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

How do I print #12 envelopes with HP Officejet 6500 E709n Series printer?

When I try to print 4.75" x 11" (#12 envelopes) on my HP Officejet 6500 E709n Series printer, it gives an error msg. and will not print. Is there a work around for this, or do I have to use #10 size and make it do?
Win XP pro, MS word.

You could try creating 'paper' the size of the #12 envelope, and try that possibly.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Our hp officejet 6500 e710 printer will not print. it is networked, i can print a test page

We have a Officejet 6500 E710 printer connected to a HP Pavilion dv7 latop via our home network. Windows 7 op sytsem.
I can not get documents to print from the laptop.
The network connection appears to be good.
I can prnt a test page from the laptop and get it to scan but can not get it tp print any document or web pages.
It shows Status "Error printing"
Any advice would be appreciated.
Thanks

Hello wombat61,
Please download and run the HP Print and Scan Doctor using the below link, which should resolve the issue ..
www.hp.com/go/tools
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Print driver for hp officejet 6500 unavailable with Windows 8.1

I have an Asus laptop running Windows 8.1. Every few days I can not print on our Officejet 6500 e709n. The message says the print driver is unavailable. I must then uninstall and reinstall the print driver. We have a Dell laptop running Windows 7 and a Macbook also connected wirelessly that we have no problems with this issue. How do I correct the issue so I do not have to uninstall/reinstall every few days?
Thanks.

Hi,
Where do you install from ? Please try the following driver (dated Aug-28-2014):
http://ftp.hp.com/pub/softlib/software12/COL31304/mp-110035-2/OJ_AIO_6500_E709_Full_Win_WW_140_408-4...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I print Double A4 with HP Officejet 6500? I only get the first page...

I try to print a large photo in "landscape" Double A4 with my HP Officejet 6500.
I can select "Double A4" to print but I only get the first page. So I only have half a photo.
What should I do?

chris
You can not attach a multi-page .pdf document to Pages.
Just create a folder in which you enclose both your Pages letter and the .pdf.
Peter

How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)

How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work (on prior iPhones) before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)
I don't get it, I read one post about why would we have to buy an AirPrint Printer when we have used the "print to a wifi printer" just fine in the past? Yes I feel that's exactly what's happening to me now too. I want to print from my iPhone and iPad to my WiFi Printer which is also now connected to my Airport Express WiFi network just fine. No problems.

Very glad you added that bit of information because I see different problems similar to this. I want to share with them what you did and hopefully you not only fixed your specific problem but you can lend some more advice to others with problems like this. Thanks!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time. This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail! Any help?

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

DUPLEX PRINTING - HP Officejet 6500 E710a-f PRINTER

Similar Messages

Maybe you are looking for