Duplicate texts, and multiple songs playing at once
This has happened a couple of times now. If I need to restart my phone for any reason, my phone resends old texts. I am not sure if my phone is defective or if there is maybe a setting I can change?
And now a new problem. I was trying to listen to music through bluetooth, in my car and it started playing 2 songs at the same time.
@chloe43
Repair your phone with PCC and report back
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
Similar Messages
-
Audio problem- Multiple songs playing at once
Hello,
I have a problem with playing a song. Everything seems fine
until the song reaches about half way and then the same song starts
playing ontop of the same song. First you hear the song, then you
hear two songs, then three, and so on.
What am I doing wrong? I can't figure it out. Any help would
be great.
Thanks
BernieI would say that if you want the song to loop that it may be
better to use a Sound Object and a little code. so if you would be
interested in this route - remove the sound from the timeline.
first - set up the sound by selecting it in the library and
right-click select 'properties...' - then in the properties panel
check the 'export for ActionScript' box and give the sound an
'Indentifier' name - this will allow you to use the sound file
within the document and point to it in code by using the ID name.
next - make a new layer called 'actions' on the main timeline
if you don't have one already - select the first frame and enter
the code below - replace the 'IDname.mp3' with the ID name of your
sound file you've assigned.
see the 'sound.start()' method below - the second parameter
in it refers to the amount of 'loops' that it will run before
stopping - you can set this any way you would like.
more information on the Sound Object class is available
HERE -
Multiple songs playing at once!
If you get a song within 1-2 seconds of completion, and you press the left arrow key (to go back to the start), it starts playing the song over, as well as playing the next song in the playlist simultaneously!
I would say that if you want the song to loop that it may be
better to use a Sound Object and a little code. so if you would be
interested in this route - remove the sound from the timeline.
first - set up the sound by selecting it in the library and
right-click select 'properties...' - then in the properties panel
check the 'export for ActionScript' box and give the sound an
'Indentifier' name - this will allow you to use the sound file
within the document and point to it in code by using the ID name.
next - make a new layer called 'actions' on the main timeline
if you don't have one already - select the first frame and enter
the code below - replace the 'IDname.mp3' with the ID name of your
sound file you've assigned.
see the 'sound.start()' method below - the second parameter
in it refers to the amount of 'loops' that it will run before
stopping - you can set this any way you would like.
more information on the Sound Object class is available
HERE -
Why are some songs on my phone in pale text and I cannot play them
Why are some songs on my phone in pale text and I cannot play them
the songs are in the libraryI had the same problem when only about 5% of my 11,000 song collection on my Ipad would play after downloading OS 7.0. I re synced my Ipad with ITunes on my MacBook selecting no music and all of the music was erased from the Ipad. I then re-synched it selecting all music, all songs re-loaded, and all songs play just fine.
-
i brought an album and one song plays half way and then just stops playing and skips to the next song
- Try a reset. Nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Delete the songs and redownload by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Help...is there a way to send an entire text mesage thread to my email? My phone is sending duplicate texts and everything I am reading says to delete message threads. I have an IPhone 4. thanks
You can try an app like PhoneView (Mac) or TouchCopy (Mac or PC). Both will allow you to archive text messages to your computer.
-
Just downloaded a music video to my iPad and the song plays but the video seems to be frozen, any suggestions?
Play music videos back in the video app to see the video.
-
Multiple copies of music on iPad, and some songs play as a different song
Hi,
I've been having this weird problem that I have been looking into for many times and never have found a straight answer.
I've been finding that I have multiple copies of the same song on my Music (built-in) app on the iPad 2. I don't know why it's been doing this. Yesterday, I finally got a chance to restore my iPad 2. After the restore, the same problem consisted. Not only has that been happening, but I also have been having another weird problem with the music app too. I have a song that I want to play , but it ends up playing a different song. For example, choose the song "we are the champions" or some song, and then it plays a different song like "We will rock you" or some other song. (it's not these songs, I don't have them in my library. They are just examples) but it keeps the name. So when the iPad "says" it's playing "we are the champions" it is actually playing "we will rock you" or any other song.
Sorry if I haven't made this clear enough. I tried the best I could. I have never had this problem until I updated to iOS 5. I am currently running iOS 5.0.1
Is there any way I can fix this problem I have been having? I already tried the restore. I don't know what else to do.I'm not sure about the playing a different song when you choose a nother, but I Just figured out the multiple copies issue.I had been having the same problem and realize that some of the songs in that album were marked as "part of a compilation." SO i went to each individual song in that album and unchecked the box (when you go to th e"get info" screen) Hope that helps.
-
Basically, I've already described the problem. Some songs play perfectly fine in itunes but the same songs corrupt when placed on different devices of varying age. Therefore, I don't think there's something wrong with the original file and I don't think there's something wrong with all of my devices. Why is this happening and how can I fix it?
Hello there klundie,
I was researching the issue you are experiencing, and have come to the conclusion that the songs in question may need to be converted and re imported. This article, iTunes: How to convert a song to a different file format outlines how to re import songs that are already in your itunes library, which I believe will resolve the issue.
You can find the article here: http://support.apple.com/kb/HT1550
To convert a song's file format:
Open iTunes Preferences.
Windows: Choose Edit > Preferences.
Mac: Choose iTunes > Preferences.
Click the General button, then click the Importing Settings button in the second section of the window.
From the Import Using pop-up menu, choose the encoding format that you want to convert the song to, then click OK to save the settings.
Select one or more songs in your library, then from the Advanced menu, choose one of the following (The menu item changes to show what's selected in your Importing preferences):
Create MP3 version
Create AAC version
Create AIFF version
Create WAV version
Create Apple Lossless version
If you haven't imported some songs into iTunes yet, you can import and convert them at the same time. This will create a converted copy of the file in your iTunes Library based on your iTunes preferences. To convert all the songs in a folder or on a disk, hold down the Option key (Mac) or Shift key (Windows) and choose Advanced > ConvertImport preference setting. The Import preference setting will match what you chose in step 3. iTunes will prompt you for the location of the folder or disk you want to import and convert. All the songs in the folder or on the disk will be converted. Note: Some purchased songs are encoded using a protected AAC format that prevents them from being converted. iTunes Plus purchases are not protected and can be converted.
The song in its original format and the newly converted song appear in your library.
All the best,
Sterling -
I am having problems with Apple TV scrambling albums while playing from iTunes. The track listing remains correct but the songs play out of order and not all of the songs seem to in place, I.e. a song that played previously under one title will play as a different title. Any thoughts or help? Thanks.
A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile. -
How to Improve Design for HTML, Plain Text and Multiple Recipients?
Hello there,
JavaMail programming is so fun! I first start off mixing the JavaMail code inside a servlet and then refactored it to two separate classes.
Mailer is the independent class which uses JNDI to look up config parameters, sends e-mails, and then closes the connection with the protocol.
public class Mailer {
private Session mailSession;
protected void sendMsg(String email, String subject, String body)
throws MessagingException, NamingException {
Properties props = new Properties();
InitialContext ictx = new InitialContext(props);
Session mailSession = (Session) ictx.lookup("java:/Mail");
String username = (String) props.get("mail.smtps.user");
String password = (String) props.get("mail.smtps.password");
MimeMessage message = new MimeMessage(mailSession);
message.setSubject(subject);
message.setRecipients(javax.mail.Message.RecipientType.TO,
javax.mail.internet.InternetAddress.parse(email, false));
message.setText(body);
message.saveChanges();
Transport transport = mailSession.getTransport("smtps");
try {
transport.connect(username, password);
transport.sendMessage(message, message.getAllRecipients());
Logger.getLogger(this.getClass()).warn("Message sent");
finally {
transport.close();
}MailController is just a simple Java servlet where a Mailer object is instantiated and a String is passed inside the Mailer.sendMsg() method.
public class MailController extends HttpServlet {
/** static final HTML setting for content type */
private static final String HTML = "text/html";
myapp/** static final HTML setting for content type */
private static final String PLAIN = "text/plain";
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
doPost(request, response);
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType(PLAIN);
PrintWriter out = response.getWriter();
String mailToken = TokenUtil.getEncryptedKey();
String body = "Hello there, " + "\n\n"
+ "Wanna play a game of golf?" + "\n\n"
+ "Please confirm: https://localhost:8443/myapp/confirm?token="
+ mailToken + "\n\n" + "-Golf USA";
Mailer mailer = new Mailer();
try {
mailer.sendMsg("[email protected]", "Golf Invitation!", body);
out.println("Message Sent");
catch (MessagingException e) {
e.printStackTrace();
catch (NamingException e) {
e.printStackTrace();
}Have some design issues...
If you can notice, I manually place the body of the e-mail (as a String) from inside the client (in this case, a Java Servlet). Also, I manually have to switch the content type inside the doPost().
Question(s):
(1) How can the Mailer class be set up, so it can send both HTML and plain text messages?
(2) How can the Mailer class be structured to send e-mail to multiple recipients or one user?
(3) Would both of these features / actions require writing two overloaded methods for sendMsg()?
Would appreciate it if someone could help me...
Happy programming,
MichaelOkay, I came up with this single method:
Mailer.java:
public class Mailer
private Session mailSession;
protected void sendMessage(String email, String recipient, String subject,
String plainText, String htmlText)
throws MessagingException, NamingException
Properties props = new Properties();
InitialContext ictx = new InitialContext(props);
Session mailSession = (Session) ictx.lookup("java:/Mail");
String username = (String) props.get("mail.smtps.user");
String password = (String) props.get("mail.smtps.password");
MimeMessage message = new MimeMessage(mailSession);
InternetAddress from = new InternetAddress(email);
InternetAddress to = new InternetAddress(recipient);
message.setSubject(subject);
message.setFrom(from);
message.addRecipient(Message.RecipientType.TO, to);
Multipart multipart = new MimeMultipart();
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(plainText);
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
messageBodyPart.setContent(htmlText, "text/html");
multipart.addBodyPart(messageBodyPart);
message.setContent(multipart);
Transport transport = mailSession.getTransport("smtps");
try {
transport.connect(username, password);
transport.sendMessage(message, message.getAllRecipients());
Logger.getLogger(this.getClass()).info("Message sent");
catch (Throwable t) {
Logger.getLogger(this.getClass()).error("Unable to Send Message");
t.printStackTrace();
finally {
transport.close();
}Created a MailController class to instantiate and run the Mailer class.
public class MailController extends HttpServlet {
// doPost() method()
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType(PLAIN);
PrintWriter out = response.getWriter();
String mailToken = TokenUtil.getEncryptedKey();
String plainText = "Hello there, " + "\n\n"
+ "I wanna invite you to a game of golf!" + "\n\n"
+ "Please confirm: https://localhost:8443/myapp/confirm?token="
+ mailToken + "\n\n" + "-Golf USA";
String htmlText = "<H1>Golfer Challenge!</H1>";
Mailer mailer = new Mailer();
try {
String from = "[email protected]";
String recipient = "[email protected]";
String subject = "Golf Challenge";
mailer.sendMessage(from, recipient, subject, plainText, htmlText);
Logger.getLogger(
this.getClass()).info("Message Sent to: " + recipient
+ " from: " + email);
out.println("Message Sent to: " +
recipient + "\n" + " from: " + email);
catch (MessagingException e) {
e.printStackTrace();
catch (NamingException e) {
e.printStackTrace();
}Question(s):
(1) How come the Multipart Alternative only supports HTML for the second part? Can I specify it to send HTML first and plainText second?
(2) How would I send in multiple recipients? Would I have to pass in an array reference (surrounded by a for loop) inside sendMessage() as follows:
mailer.sendMessage(from, myArray, subject, plainText, htmlText);
Thank you for all of your help!
-Michael -
BEST SETTING FOR MOTION ANIMATED TEXT AND GRAPHIC TO PLAY FROM STANDARD DVD
Hey all,
I have a motion background with some animated text that I want to play as a loop on a HD plasma.
The content will play off a standard sony dvd player. clip is about 5 mins long but I want it to loop.
Questions-
What format should I compress the animated squence in before using DVD studio pro.
Content will have no menu.
Is there another format then NTSC DV i can try and use mpeg4 or something most players will accept that is less compressed the mpeg2 or 4?
Thanksfound it myself in myself made my own compressor setting.
-
Making multiple songs play during a slideshow
I have a slideshow I created in iDVD 6 that is approximately 35 minutes. I would like to have several different songs cycle through as the slideshow runs. I created a playlist in iTunes with the songs I want. When I'm editing the slideshow and I click the media button and then the audio button, it gives me my iTunes song list, but not any of the playlists I've created in iTunes. What am I doing incorrectly? As it is, I can only get a single song to play on a loop during the slideshow. Thanks for any guidance.
Welcome to discussions, Chris
Burn your Playlist to an audio CD.
Then open that CD in iTunes.
Highlight all of the songs.
Go to Advanced and select Join CD Tracks.
That will make one long song in your iTunes library that you can import into your project.
:)Sue -
Multiple videos playing at once.
Can iMovie makes videos with multiple different video playing together as one? Because I am doing this vocal thing while I need multiple records down together as they play. If iMovie doesn't do the job, what other programs can I try?
Boattt wrote:
... If iMovie doesn't do the job, what other programs can I try?
if you mean that 'Brady Bunch'-effect, you have two options
Quicktime Pro, which costs 30$, and is a little geeky..
Kirk, is your excellent eBook still avail?
It tells EVERYTHING you have to know about QT ...
and frequent contributor Jon shares his insights in his screencasts
http://web.me.com/jrwalker4/QuickNotes/QT_Pro/Archive.html
(#013 shows multiple videos on one)
Plan B)
FinalCut/Express ... 199$ .. 1400pgs manual, but muuuuch easier (for me) -
How to search for text inside multiple pdf file at once in ipad
Hi
I am student and i need search a word or subject or sentences on my all pdf files,i have tested some applications like ibook, ipdf, addobe reader, good reader ,.... But couldn't find what i need to have.
Please kindly help me to find the best application.
ThanksI found an article, that claims PDF Expert does exactly what you are asking.
Article: http://www.imore.com/pdf-expert-ipad-brings-full-text-search-pdf-library
PDF Expert: https://itunes.apple.com/us/app/pdf-expert-fill-forms-annotate/id393316844?mt=8
Maybe you are looking for
-
How to install forms and reports 6i
I am facing a problem while installing Forms 6i. The following are the details. I successfully installed Oracle 9i first under F:\oracle\ora90. While installing Forms 6i, I selected the "Typical" and gave the path as "F:\oracle\ora90" and clicked on
-
Claims Payment and Claims Reserve Datasources
Hello All, I understand that claims Payment(0ISCM_PAYMENT_01) and Claims Reserve (0ISCM_RESERVE_03) extracts claims for which payments and reserves exist. These claims may be open or may not be. I am looking for Claims which are open but there are no
-
How to search apps in the popular mode only
I would like to set my search for Apps to Most popular as a default. The other thing is every time I download an app and go back,I have to start at the beginning of the apps search, **** annoying!
-
Warehouse 001 does not exist to copy from in our ERP system
Trying to create a new warehouse in warehouse management. Went to the class SCM630, they said to copy from warehouse 001. But we don't have warehouse 001 to copy from in our ECC 6.1. Where can we go to acquire that warehouse 001 setup?
-
I've recently experienced an issue with the Apple Retail store. I have been told by 2 different retail stores that my machine must wait at the store for 5 days before being repaired. Although the parts are in stock - that is how long the line is.