DVD drive issues and other problems

Nothing but problems with my mac since day one. This is the reason why I went from PC to Mac to avoid all these problems.
Started with DVD drive problems. Took my computer in as they said wound need to replace the drive -and it would take a week.... sorry I can't be down for a week. Many of my businesses rely heavily on me have access to my computer.
There have been many small glitches since then also. Some times the display wont come back on after I have closed the lid and re-opened. Only way to get it working again is to do a manual restart.... and sometimes that doesn't even work.
<Title Edited by Host>

I forgot to mention that I have also cleared my PRAM (a few times) -- so that's probably not the culprit.

Similar Messages

DVD drive issue and permissions repair

Forgive me if I'm combining two issues in this posting. If they are not related I can separate them out.
I don't know if my drive is going, but I have a DVD for a tv show that I wanted to watch on my Macbook Pro running Snow Leopard (latest patches). For a while now I've had to keep reinserting the disc because it's not registering. I put it in, and can hear mechanisms, then it spits it back out.
I watched one disc, ejected it then tried to play another and it just would not load.
I thought of checking disk permissions, thinking maybe the OS had some permissions problems that may be preventing it from reliably reading the disc. The disk utility reported a number of permissions errors and owner errors, so I repaired the permissions and it reported that it was completed successfully. I thought I'd run the verify permissions again, just to make sure the errors had really been repaired, and they're still there - some of them were gone, but there were others reported. I ran the repair and verify a number of times now and nothing's changed.
My questions:
1. Could the problem I'm seeing with my DVD drive be related to permissions of some of the system files?
2. Do I have anything to worry about with the disk permissions not appearing to be repaired?
3. Would I gain anything by booting to install media and running the verify and repair from there?
Thanks much in advance!

Could the problem I'm seeing with my DVD drive be related to permissions of some of the system files?
If you've repaired permissions, and you still have the problem, then the answer is no.
Do I have anything to worry about with the disk permissions not appearing to be repaired?
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
Would I gain anything by booting to install media and running the verify and repair from there?
No.

Satellite L300D-11A - DVD-drive issue and Blue Screen

Hi
I'm going out of my mind :o//
My Satellite L300D-11A was delivered with a Windows Vista Home Premium, but I recently made a clean installation of the Windows 7 Home Premium 64 bits.
Since then I have had problems with "Blue screen error's" comming randomly. Have purchased and installed a Registry clean up program, but that did not fix the problem. Any one else with that problem - and a possible solution.
And now for my big problem. My CD and DVD drive is driving me crazy ;o) It's a Mat****a DVD-RAM UJ-850S ATA and from my search on the internet I have found that a lot of other Mat****a owners have had the same or similar problem(s). My drive will not regonize or play/read from CD's. DVD with movies or programs I can play. Burning CD's is not possible and burning DVD's is sometimes working, and other times not.
I have read about the different fixes that is posted - also here on the Toshiba forum - Non of the suggested solutions is working for me - any new solutions that I could try.
Seriously thinking about buying a external USB DVD drive/burner - but can someone please tell me why Toshiba does not get the fingers out off their B** and find a solution like it seams Sony has done.
Look forward to any reply ;o))
Someone once told me about this quote - "Don't wish it was easier - work on getting clever !" I need your help to get clever ;o))

> But I do not now how/where to get the registration keys! I have tried looking for them.
Are you talking about *Upper/Lower Filters* ?
Follow these instructions for clearing the Upper/Lower Filters:
Click on Start --> Run --> and type in 'regedit' followed by the enter key
Expand the "HKEY_LOCAL_MACHINE" key (looks like a folder) by double clicking it (or clicking the "+" next to it.)
Expand the "SYSTEM" Key
Expand the "CurrentControlSet" Key
Expand the "Control" Key
Expand the "Class" Key
Please look for a key containing the following string of letter and numbers:{4D36E965-E325-11CE-BFC1-08002BE10318}
High light this key by left clicking once on it
On the right hand side you are looking for "UpperFilters" and "LowerFilters" under the "Name" column, once you find these please delete them by right clicking on them and choosing "delete"
Please exit the registry by clicking on the "X" in the top right hand corner of the screen
Reboot your computer

Latency setting issues, and other problems.

Hello, this is my first time posting on a forum, and I wouldn't be here if I didn't think this was an interesting problem.
My computer (Hardware listings below) has a microphone lag issue. I tested it by plugging in my microphone and recording the recording through speakers, and it is very clearly lag. I am in need of a solution to that, but that is just where my problem starts. Whenever I try and load in an MPEG4 audio file, it seems to play and then all of my sound goes out on my system. Sometimes the sound goes out immediately after opening the program. The way I treat it is by putting my computer to sleep and waking it up, and the sound then returns until the program decides to randomly shut it down again. The mixing tables are reacting on screen, but there are no system sounds coming out at all. On top of that, when trying to fix my latency issues, it didn't help enough moving it down to 30 on the hardware options for the MME settings. It could be my computer is too slow or something, but I also tried switching it to asio. I have ASIO4all and I don't know if I should be running it, as I don't know too much about how my system would interact with all of these programs. I run Audition 5.5 fully legally, and I can update with whatever. I just want to be able to overdub without any lag, and everything I do to try and fix it makes a new problem happen. I am using a microphone plugged into the 3.5mm microphone slot on the motherboard. It's a Sure mic plugged in through an SLR to Quarter Inch male cable
SYSTEM:
Built
OS: Windows 7
Motherboard: EVGA P55 FTW 200 SLI
Processor: Intel I-5 760 quad core
RAM: 16 gigs Corsair XMS3
Video card: EVGA GTX 460 SE
Hard drive: W.D. Caviar Black 7200 RPM 1TB
Coolermaster storm scout case
Disc drive and Corsair power supply
If anybody knows any part in fixing or at least telling me why I have issues with all of the information I provided, I would love to hear it. I just want to record so badly after spending all of this money on the software and hardware and cables and etc...
Thank You

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

40RV525U HDMI issues, and other problems

I'm using the 40RV525U model, and none of the HDMI ports work consistently, if at all. It's been like this since I bought the TV, but I (unfortunately) didn't take it back because I could use component cables with the PS3...it's primary purpose. I recently bought a PS4, and there are no component cables available, and converters don't work. Surpringly, I was able to get the HDMI 1 port to work after changing the PS4's output to 720p, but it wasn't consistent. It worked great for about 3 days, no problems at all. And then last night, it started losing the handshake every 30 seconds or so. I would get the dreaded snow screen (snow looks great in HD, btw) and black screen, and then it would re-connect and I'd have picture for a minute.
The fact that I was able to get it to work for 3 days without the slightest problem leads me to believe that it's a firmware issue. I'm on 1.05, the latest firmware version that I can find. Are there any further updates? The problems with this TV are numerous, but I like the picture, and I can't really afford to buy a new TV.
Thanks

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

G50-70: empty DVD-drive clicking and freezing other drives for about 30 seconds all the time

Hello board. Big problem. Seem to be the only one having this after searching the board:
Brand new G50-70: When using OS from the SSD or using OS from the SSD and doing things with a USB-drive, the empty internal DVD-drive making clicking sound and sometimes freezing SSD read/write operation for about 30 seconds but all the time freezing USB-storage read/write operation for about 30 seconds.
When freezing there's always clicking. But when clicking there's not always freezing except when using USB-storage.
OS is Win81-64.
An example scenario: connect USB stick, open terminal, type diskpart, dvd-drive clicks and freezes opening of diskpart for about 30 seconds, then the same may or may not happen when entering commands like clear the stick and format the stick.
Any clues, why I have this issue? Thank you very much for reading.
Solved!
Go to Solution.

hi georg43,
it's possible that there's a software running on startup that's accessing the ODD when the machine is being used (especially if the ODD LED blinks when it's being accessed)..
To check, you can perform a clean boot to temporarily disable apps & services running on startup. If the machine functions properly on a clean boot, you will need to enable the startup services/programs that you have disabled in groups of two or three (trial and error) to find the culprit. You can start by enabling the lenovo services and apps first followed by the Intel ones and observe.
In addition, you can also try to disable the DVD-drive under device manager and observe.
- Link to picture
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Toshiba Satellite a505-6005 hard drive issue and questions regarding options I may have

Issue: start up computer and windows does not start. It eventually goes to a startup repair screen and eventually says "resolving disk errors...", and that's if it even gets to that screen. Unfortunately I never made a recovery disk or system image discs (I know that was not smart). I did however kept my files backed up so that was good.
Steps I took: Took it to Best Buy and the tech advised me that the Black Tie 2 year protection had expired on Jan 30th 2012, and so it could not be repaired for free. I asked the tech there how much it would cost to fix and they had advised me that it was most likely a hard drive issue and that it would cost nearly $400 to replace/fix it. So I decided to buy a new Asus K53E-BBR14 laptop since it was not much more. When I got home and loaded everything up and got the computer to how I want, I went ahead and made a recovery disc and system image disc's. I tried using the recovery disc that I had made with my Asus in the Toshiba laptop and boot it from the dvd drive and it did not get anywhere. So I ASSUME that it really is a hard drive error because the RAM worked just fine in my new laptop and "repairing disk errors.." means something is wrong with the hard drive:
Now that you know the background of what has happened my questions are as followed:
1. Can I buy a new hard drive for the Toshiba and use the recovery and system image disc's i created on the new hard drive that i install in the toshiba? and just removed the bloatware from Asus (or does that not even get added to the disc's I created)?
2. If so, will it prompt me to enter the Windows 7 product key? and therefore using the product key located on the bottom of the toshiba?
3. What other steps could I take to make this toshiba laptop salvageable? This way i can turn around and sell it.
Thanks,
Russell States

Also,
I noticed that i can purchase (well pay the shipping anyways) recovery media from Toshiba. Can I use that on a new hard drive installed in the toshiba?
BTW ran the Windows Memory Diagnostics Tool and no problems were found with the memory. and i do not care about the old hard drive as I have MY files backed up. I just want to try to get this toshiba laptop back to being "like new".
Thanks,
Russell

ITunes for 64bit Windows 7 Driver/CD/DVD/Drive Issues-

Hi There
I am sure that there are many many users out there suffering the same frustration as me in regard to ITunes just not working properly with Windoews 7 (64Bit).
I have been trying to solve the mystery of "ITunes for Windows Registry Settings Warning When Opening Itunes.
I have tried all the recommended actions to correct this problem without any success and I do mean ALL.
Below is a screen shot of my registry, can anyone see anything wrong with it?
In the meantime (Last four months) I have stopped using ITunes and instead have used Digital 7, this will be my very last attempt to get ITunes working properly, failure will mean consigning ITunes to the same place as any other Software that does not do wshat it says on the can.
I hope someone can help.

That's good that it is in device manager, but what about in Computer with the rest of the drivers?
Also, are the drives listed in Computer and device manager or just device manager?
I want to verify if the symptoms are present for a particular software issue before looking at other issues. I really doubt it is a driver issue at this point. If it was, then I suspect the issue would be present from day one.
It could be that the lens has dust buildup preventing it from working properly. They do make CD cleaning kits that have a special CD designed to clean the laser as it passes over the lens. If you happen to have one of these, or access to one, I recommend trying this step to make sure it isn't as simple as dust buildup interfering with the laser.
It could also be hardware failure, but I would like to try a few other steps before coming to that conclusion.
It may be worth reviewing this document as it covers a lot of the most common issues behind DVD drive issues. Feel free to skip any steps you have already tried.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I still have Cd/DVD drive issues

The CD is ejected after a short while and never mounted. I have cleaned the optics of the CD drive and reset my PRAM.
Has anybody discovered a complete solution for this problem.

That's good that it is in device manager, but what about in Computer with the rest of the drivers?
Also, are the drives listed in Computer and device manager or just device manager?
I want to verify if the symptoms are present for a particular software issue before looking at other issues. I really doubt it is a driver issue at this point. If it was, then I suspect the issue would be present from day one.
It could be that the lens has dust buildup preventing it from working properly. They do make CD cleaning kits that have a special CD designed to clean the laser as it passes over the lens. If you happen to have one of these, or access to one, I recommend trying this step to make sure it isn't as simple as dust buildup interfering with the laser.
It could also be hardware failure, but I would like to try a few other steps before coming to that conclusion.
It may be worth reviewing this document as it covers a lot of the most common issues behind DVD drive issues. Feel free to skip any steps you have already tried.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error

ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error

Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive?

Any solution to DVD drive issue post Lion install yet?

Any solution to DVD drive issue post Lion install yet?

Since installing Lion no DVDs are being read by the superdrive, this is a problem that has been highlighted by quite a lot of people.
CDs are being read fine.
After inserting the DVD there is some noise, sounds like it is trying to pickup the DVD then spits it back out.
Previous posts from other people:
http://www.mac-forums.com/forums/os-x-operating-system/245917-heads-up-lion-supe rdrive-fake-glitch-possibly.html
https://discussions.apple.com/thread/3199297?start=15&tstart=0

BOSD, Battery issues and Heating problem after iOS 8 upgrade

i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

Question
How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" if you want to restore multiple windows. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Serious Mac Mini DVD Drive issue!

Ok guys, having big troubles with my Minis disc drive at the minute!
Heres what happened…
Tried to copy some files off a DVD so that I could make several copies of it for my grandfather. The Disc is a home made one that he made himself, complete with a label over the top of the disc.
When I put the disc in, it was a little noisy, but nothing unusual. When spinning the disc to take the files off however, the whirring became a loud vibrating/grinding noise, and went on for quite some time. It then slowed down, until it eventually stopped. At this point, the DVD drive itself (and not the Mac!) started playing an on off tone that sounded less than happy. Sounded quite similar to an alarm of some kind. Strangely it was clearly a hardware noise, and not a software noise.
Pressing the Eject button on the keyboard did nothing, reboot, the warning tone continued, and only after pressing the on and off button twice to get it to hibernate then wake up, did it want to spit the disk out.
I just put a standard film DVD in now to see if the drive was working, it took it in quite happily, whirred away fine, no horrible noises, but didnt find the disk, and now wont eject it for love nor money.
When going into System profiler to see if the Disc drive has some osrt of error status or anything hardware related messages, it causes System profiler to crash. All the other menu items work fine, but going to disc reading crashes it everytime
Message was edited by: BennyboyOxtoby

I think the lesson here is: DON'T use labels on discs (or tell your grandfather not to!)
You may have damaged your disk drive. If you are OK with computer maintenance, you can change it yourself for just the cost of a new one - £30-£40 from eBay - much, much less than getting Apple to do it.

Boot up/Keyboard/DVD Drive Issues & Questions

I thought I'd try this before giving up completely on this iMac. It's a 20" Early 2006 iMac that will not boot past the gray screen, Apple icon and rotating circle.
Here's the challenge - this iMac also does not recognize keyboard input from an Apple keyboard but will respond to an old Dell USB keyboard.
Questions
First the installation (retail Tiger) DVD is not recognized when I hold the Option (alt) key down while booting, only the hard drive is listed. Does this mean that the DVD drive is not functioning?
I managed to reset SMC which did nothing to get the DVD drive recognized and now the fans are spinning full speed as well as the computer not booting.
I would love to try resetting PRAM, how does one do that without a "Command" key? I should mention that I replaced the battery when I pulled the hard drive out to rescue the data on it. Would that have reset PRAM?
Is it possible to boot directly from an external USB CD/DVD drive, and thus be able to use Disk Utilities to attempt a repair or reinstall?
Any assistance is much appreciated!
Peace,
Gail
Message was edited by: Gail - Added more info

Kappy wrote:
Could mean the optical drive is malfunctioning or that you have a defective disc. Try cleaning the disc on both surfaces as well as checking for scratches or defects.
Both the retail Tiger disc and the original OS X Installer Disc One are in perfect condition (at least to the naked eye). Neither will boot from the drive.
How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error
I would very much like to do this but can't get the discs to boot from the DVD drive.
In order to reset the PRAM you need to restart the computer and after the chime press and hold down the COMMAND-OPTION-P-R keys until you hear three additional chimes. See Reset PRAM and NVRAM.
I do not have a COMMAND key on the only keyboard I have on hand that works on this iMac. What would be another key combination or an equivalent for a non-Apple keyboard?
Is it possible to boot directly from an external USB CD/DVD drive, and thus be able to use Disk Utilities to attempt a repair or reinstall?
Yes, you can boot from a USB or FireWire external hard drive or optical drive.
This is the route I will probably take since apparently the optical drive is toast.
Thanks for the reply, I appreciate the assistance!
Peace,
Gail

DVD drive issues and other problems

Similar Messages

Maybe you are looking for