DVD reads on G5 towers but not on imacs...

I have a DVD that was burnt on a pc. It contains mpg files.
At my studio we have 4 G5 towers (dual 2Ghz) and 3 imac G5's (isight models) and are all running OSX 10.4.6.
The DVD will not read on the imacs and is ejected within seconds.
On the G5 towers it reads quickly with no problem.
What could be the cause of this?

Someone will probably help you here, I was just letting you know. It is an easy mistake to make.
I was searching the discussions and saw a few possibilities.
The CD was burned but leaving an open session.
The CD was not burned in ISO 9660.
Possibly a faulty optical drive.
I would hope it was one of the first two.
Is there a way, for now, to get your files over a network?
I know where my wife works they are networked and can transfer files that way when needed. I know this doesn't solve your problem but may help in the short term.
Sorry for not much help.

Similar Messages

DVD Plays on computer drives, but not on dvd players

iDVD 06 - This is a new problem, just happened two days ago. Previous dvd's burned with idvd 06 work just fine on old and new dvd players. I always test them after burning. However this new project will only play on computer dvd drives (mac or pc) but not on my dvd players. The menu screen shows up, but when the play button is pushed it never starts. Disk is clean, re-burned dvd, re-exported the video and re-did the entire dvd, same issue. I have not changed any settings in iDVD 06.
Yes, I even re-installed idvd 06, but then somehow I lost some of my old themes (which happened to be the ones I wanted to use) I did back up my previous copy of idvd 06 which has my old plain themes that I love to use in the package, so I do have those. But if I bring them into the newley re-installed idvd 06, all the features do not work. Such as being able to change the type size on that paticular menu.
I am using Verbatim 8X DVD-R's and have successfully used these just the other day on another project! And those work just fine on an old and new dvd player!
I had to get these dvd's because my burner would not burn on the 16X DVD-R's that I recently bought.
DVD Burner information is:
SONY DVD RW DW-U10A:
Firmware Revision: A43h
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 0 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Computer information:
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 1
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 900 MHz
Boot ROM Version: 5.0.7f0
Any suggestions???
G-5 Mac OS X (10.4.9)

No rhyme or reason... but tried one more time after putting back my old copy of idvd 06 with my oldest themes in it, and I now have DVD's that will play on regular DVD players!
Now, if Apple could just get us a firmware update for the SONY DVD RW DW-U10A which came with my G-5 and then maybe we could all burn disks at the new 16X speed! Instead of limiting our possibilites.
Oh and yes, I did contact Sony about firmware updates. They informed me that this is really an OEM drive (whatever that is) and that Sony does not support it!

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

A DVD (mpg file only) comes up on my MacBook and Dell PC but not my iMac. Aren't all Macs alike?

A DVD (mpg file only) comes up on my MacBook and Dell PC but not my iMac. Aren't all Macs alike? I was told by a couple of experts to copy the file on my MacBook and then send it to my iMac. But shouldn't my iMac show it now if my little Mac does?

Zap the PRAM and Reset the SMC, then pop in the DVD again.

This is the same question I've asked 3x in 24 hours, but it doesn't appear in the listing. Maybe I need help in phrasing questions?:)Q. why can I play some DVDs on my MacBook Pro but not on desk top Apple (they're both -1 year olds

Hi
This'll be my third attempt in 24 hrs to ask the same question. maybe I need guidance on phrasing questions?:)
Q. Why can I always play DVDs on my MacBook Pro but not always on my desk top Apple. They're both less than year old. The desk top sometimes displays a message that says I have to change regions (from Australia to South America...doh...)

Region Code 4:
Mexico, Central and South America, and the South Pacific.
Includes Antigua and Barbuda, Argentina, Aruba, Australia, Bahamas, Barbados, Belize, Bolivia, Brazil, British Virgin Islands, Chile, Colombia, Costa Rica, Cuba, Dominica, Dominican Republic, Ecuador, El Salvador, Falkland Islands, French Guiana, Grenada, Guatemala, Guyana, Haiti, Honduras, Jamaica, New Guinea, New Zealand, Nicaragua, Panama, Paraguay, Peru, Suriname, Trinidad and Tobago, Uruguay, Venezuela
Apparently my first response was off in left field. The DVD player has its own code. My recommendation is to change the code when it asks. It is possible that the disks that play correctly are region-free and the ones that don't have a region code. If this does not work, you still have four more changes available; you won't be stuck with the new code.

How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI?

How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI? I'm having some hiccups getting Adobe to register the software, but since I set it as the default .pdf reader during setup, things try (and fail) to open in the as yet unregistered software. How can I change it temporariiy to the Acrobat Reader XI that I have installed?

Anubha,
It worked! Thank you so much.
I'd opened file with the 'Open with' feature then clicking Adobe Reader,
but that didn't do it. When I used 'Open with', then 'Choose default
program...', it worked like a charm.
Again, thank you!
Jonathan
On Wed, Mar 18, 2015 at 10:16 PM, Anubha Goel <[email protected]>

Read keywords from file but not develop settings?

Is there any way to read IPTC Core metadata, but not develop settings, from a file? I'm still figuring out my Lightroom workflow and made some errors that I'd like to recover from. Here's the situation:
In Lightroom 2.x I selected images, gave them star ratings, and made initial Develop module adjustments. I did NOT write the metadata back to the files (my mistake). Later, my keywording assistant opened the files in another program (Breeze Browser) and added extensive keywords using a controlled vocabulary that works very well and very fast in Breeze. Now I have extensive caption and keyword data in the XMP sidecars, but develop settings in Lightroom's database. I need to merge them.
The slow and tedious workaround in Lightroom is to select the photo, copy the develop settings, read the metadata from the file, then paste the develop settings back in. It works, but is repetative and slow. There's not even a keyboard shortcut for reading metadata. The other tedious workaround is to export the keywords to a text file (using Breeze) and copy & paste them into Lightroom's keywords field. But that's even slower.
Is there a way to write only the develop settings to the files?
Any other suggestions on how to proceed? I have several hundred images that need to be fixed.
In the future, I know I need to write the metadata to the files after making any adjustments in Lightroom so the data travels with the files themselves and isn't just in Lightroom's database.
-- Mark Turner

Ok, thanks for the reply.
I feel a bit ashamed now, because my topic title contains the function i needed...
So, assuming that i would have
String content = "458,304,0,345,432";i could split this and put this in an array string using a code like
String[] arry = null;
array = content.split("\\.");I haven't tested the code yet, cause i'll go to bed soon, but will this split all at once and put it in the array or do i have to create a loop or something ?
And is it possible to put number one using split in the array[x][v] on the x location and the others at the [v] location ? (the first number of each five has to be added to [x] and the other 4 to [v] )
Again thanks for your reply, cause im a bit further this way in accomplishing what i want to reach :)

ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

Exactly which password are you inputting? iCloud looks for your AppleID password.

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help

I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help

make sure it's not being connected to by any of the other two
one can only connect 1 device at the time and just by waking up sometimes a headset connects to a device
automaticly
then forget the bluetooth device in OS X and put the headset in pairing mode / discovery mode and connect with it once again with the mac

I have subscribed to US Holidays calendar. These holidays show up on iCal on my iPhone and on my iPad, but not on iMac. When I "get info" for that calendar, "location" is set to iCloud.

I have subscribed to US Holidays calendar in iCal. These holidays show up in iCal on my iPhone and on my iPad, but not on iMac. When I "get info" for that calendar, "location" is set to iCloud.

I found this link (trash Calendar Cache and iCal.plist), and it solved my problem. https://discussions.apple.com/message/11084987?searchText=ical%20us%20holidays%2 0not%20showing%20on%20imac#11084987

DVD Drive issues, plays CDs but not DVD data or regular - Satellite (unknown series type)

I tried to update the firmware but ran into some strange issues. First of all according to google, the drive is manufactured by Panasonic. Toshiba doesn't make their own drives? For this reason I wonder if it is improperly detecting the drive make/model.
Anyways I downloaded the firmware update for it, version 1.03. It is a MAT**bleep**A UJDA760 (going from memory, model may be slightly diff like UDJA). When I run the firmware update it doesn't detect the drive at all and says it is for a THINKPAD?? Weird...
Also, if you have a link to a guide for removing this drive I would appreciate it. I want to verify that windows is detecting the model/maker correctly. It is not one of the simple hotswap types, it looks like I have to remove at least the entire bottom of the laptop.
I am working on this for a client, I do tech repair on craigslist but my laptop hardware expertise is limited most of my experience is with desktops.

joe7dust wrote:
I tried to update the firmware but ran into some strange issues. First of all according to google, the drive is manufactured by Panasonic. Toshiba doesn't make their own drives? For this reason I wonder if it is improperly detecting the drive make/model.
Anyways I downloaded the firmware update for it, version 1.03. It is a MAT**bleep**A UJDA760 (going from memory, model may be slightly diff like UDJA). When I run the firmware update it doesn't detect the drive at all and says it is for a THINKPAD?? Weird...
Also, if you have a link to a guide for removing this drive I would appreciate it. I want to verify that windows is detecting the model/maker correctly. It is not one of the simple hotswap types, it looks like I have to remove at least the entire bottom of the laptop.
I am working on this for a client, I do tech repair on craigslist but my laptop hardware expertise is limited most of my experience is with desktops.
Typically if the optical drive can read CDs but not DVDs (or vice versa), there has been a hardware failure of the DVD or CD circuitry. Drivers/firmware aren't going to solve the problem, only replacement of the drive.
Find the correct drive at http://www.sparepartswarehouse.com/
Find unofficial disassembly instructions at http://www.irisvista.com/

How can I view DVD's that I dubbed from old vhs tapes? I finalized them and can play on other DVD players but not my IMac. Is there a specific program?

I dubbed DVD's from old VHS tapes. I finalized them and can play tehm on differant DVD players, but on my IMac I can't play them. Ultimately I want to create home movies with pics, but how can I play the DVD's?

A DVD is a DVD, unless it's been authored in a non-standard way. When you insert it in your Mac, do you at least see the disk appear on the desktop? Does it have a VIDEO_TS folder in it, containing various files?
If you open DVD Player manually (from the Applications folder), does it see it and start playing? If not, try downloading VLC (free) and see if that works.

Help! hd dvd will play on computer but not in dvd player

i created a hd slideshow aprox 25jpg images at 1280x720. in dvdsp project preferences are set to hd dvd, slideshow is set to 1280x720p. i have one image set as a menu with one button to play the slideshow. the simulation works fine. the disc burns fine and will play in the computer but not in dvd player. i have tried 4 different players. i also tried setting the prefs to sd then reburn disc. also tried converting the slide show to a track with the smae result. the media im using is imation dvd-r.
any help would be greatly apreciated!

HD discs will not play in SD players. Also changing the prefs to SD will not change an existing HD project to an SD project (you cannot go from HD to SD in a project, you need to recreate it as an SD, though you can change an SD to HD project)

Logitech external USB DVD reader/burner model LDR-PMD8U2LBK not recognized.

Got a external USB DVD reader/burner Logitech model LDR-PMD8U2LBK.
I plug the device, use the adapter but nothing happens. I tried to boot the computer with the driver plugged in, again, nothing. If I put a DVD in the driver, I hear the machine buffer but on the screen, nothing. Checked all the view options, everything is selected. It doesn't appear in the Disk Utility neither. Tried to open a DVD with VLC Player, to no avail. Checked on Logitech's site, there are no drivers for this driver. The seller told me that it should be compatible with my black macbook, I guess there is still a possibility that it is not...

You shouldn't need drivers for a USB or Firewire connected external device.
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151?viewlocale=en_US
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
 Cheers, Tom

DVD reads on G5 towers but not on imacs...

Similar Messages

Maybe you are looking for