Dymanic Parameters with a view, Report based on a proc

I have a report that utilizes a SQL Server 2005 stored procedure with one input parameter (an integer). The report runs fine, the parameter accepts input fine (ie. I can type in my integer input number and generate the report). I want to create a dynamic parameter drop down list populating this parameter from a view in the same database with a list of ID (the input integer) and descriptions.
I added the view with Database Expert, did NOT link the view and the procedure at all. Edited the parameter, selected "dynamic", picked the ID field in the value column, the description field in the description column and clicked to create the parameter.
When I try to run the report, I get the error "Prompting failed with the following error message: "List of Values failure: fail to get values. [Cause of error: Database Connection Error: Database Vendor Code: 3621 Database Connection Error: 'Database Vendor Code: 515 ' UNKNOWN.RPT '
Error Source: prompt.dll Error Code 0x8004380D
This report runs only in the CR Desktop application (11.0) - it's not a client/Report Server setup. I can connect to the database fine, I can even create and run a report of just my view of parameters.
What am I missing?
Edited by: dcaparaso on Aug 13, 2011 4:01 AM

Hi David,
I'm a bit confused on how you are getting the error. Where does the error happen? Is it in an application with the Viewer or from the Report Server?
I've run into the same error when scheduling a report in the report server. Works fine in Crystal on my machine but after it's published it doesn't run.
I found the problem to be a difference between my version of Crystal and the version of the Report Server. The Report Server was upgraded but my local version of Crystal wasn't.
Once I upgraded Crystal to match the version of the Report Server the reports were fine.
Good luck,
Brian

Similar Messages

To View Report based on Profit Center

Hi
I will require Transcation Code to view the report based on Profit center, presently we are using KE5Z T_Code but that report doen't conatin the line items which was derived the data from 1st line item
For Ex: Expenses Dr
To, Expenses Payable A/c Cr (Profit center derived from Expenses line)
these kind of derived line items profit center is not showing in KE5Z, Please let me know where can i get such kind of line items
Thanks
Sreenivasulu

Hi Friends
The problem has beend solved. It turns out that this is a report writer issue. We raised the issue with SAP and they informed that 'For Report Painter/Writer every item is checked if you have the authori-zation or not. Only the items with authorization fullfilled will be displayed afterwards'.
Based on SAP answer we created different reports for each profit center/company code.
I would like to thank you all for your time and inputs.
Regards,

Parameters Unslesct when view report button is pressed

Greetings!,   I'm experiencing a very odd issue with my report. I've created a report that has 3 multi value drop down lists (Location, Program, and Class Standing). I've built all 3 using the same format and
procedures but when I click on select all within all 3 of the parameters and press the View Report button Class Standing and Location unselect all and I'm unable to run the report.Has anyone experienced anything like this before??

Hi Solo01,
According to your description, when clicking on "Select All", some parameter became unselected. Right?
In this scenario, this issue happens when it has space/enter character within parameter. You need to replace them when creating DataSet. Please refer to a similar thread below:
SSRS 2012 multi select parameter not working in
Report Manager
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Problem with 2 View Objects based on One Entity -Probably a Bug in ADF BC

Hi
I am using JDeveloper 10.1.3(SU5) and adf faces and ADF BC and to explain my problem I use HR schema.
First, I created 2 view objects based on countries table named as TestView1 and TestView2. I set TestView1 query where clause to region_id=1 and TestView2 query where clause to region_id!=1 in the view object editor and then I created 2 separated form on these 2 view objects by dragging and dropping from data control palette.
Now when I insert a record in the form based on TestView1 with region_id set to 1 and commit the record and go to the next form I can see the record in the second form which is completely wrong since it is against the where clause statement of the second form.
I am really confused and the situation is very wired and it seems to me something like bug in adf bc.Am I right.Is there any work around or solution for solving this problem.
Any help would be highly appreciated.
Best Regards,
Navid

Dear Frank,
Thank you very much for your quick response.
Reading your helpful comments now I have some questions:
1- I have commited the record in the database so shouldn't the query of view objects be re-queried?
2- We try to use ClearVOCaches (entity_name,false) in afterCommit of the base entity object but unfortunately it does not work correctly. after that,We got root app module and used findViewObject method to find all the view of that entity (we have found them by using name not automaticlly) and called executeQuery of all views. From my point of view it has 2 big disadvantages. First suppose that this entity is an important entity and 4 or 5 viow objects are based on it. Now, For inserting one record we should re-execute 4 or 5 view which I think makes some performance issues. Besides, If during the development one programmer add a new view object based on this entity and don't add the executeQuery in the afterCommit for this view, again we have the same problem. Isn't there at least a way that automatically refresh all related view objects however the performance issue still exists.
3- You mentioned that this issue is handled in the developer guide. Could you kindly give me a refrence which developer guide you mean and which section I should read to overcome this problem.(I have ADF Developer's Guide for Forms/4GL Developer's Guide , however I search for clearVOCaches and surprisingly nothing was found!!!)
4- Could you please give me some hints that from your point of view what is the best method to solve this problem with minimum performance effect.
Any comment would be of some great help.
Thanks in advance,
Navid

Passing different (multi-) values for parameters to drill-through report, based on clicked subtotal in main report

In Report Builder 3.0, I have made a main report in which the user can filter the underlying dataset using three parameters (all multi-value). The report shows totals grouped by these three parameters, as well as a grand total. What I want is to click
on a total, which then opens the drill-through report for the corresponding records. I have achieved this for the grand total; the action in the corresponding text box passes all selected values of the parameters to the drill-through report.
What I cannot figure out is how to make this work right when clicking on a subtotal. When I use the same expression as for the grand total, the same values for the parameters are passed, instead of the subset that apply to the corresponding text box in the
main report. I expected this to work, because Report Builder /does/ correctly calculate the SUMs for the different levels, even though the expressions are the same.
My question is: how do I pass different drill-through (multi-) values for parameters, corresponding to the respective subtotals in the main report?
(FYI: I am using Microsoft SQL Server 2008 R2 and Report Builder 3.0 .)

Hello Katherine,
Thanks once more for your quick reply.
I was aware of the textbox action "Go to report", and how to pass parameters in general. My question concerned how to determine the scope of the passed multi-value parameters (to the values that apply to the respective group/subtotal). The article you linked
to is informative, but not a solution to my problem.
A colleague of mine came up with a pragmatic solution: instead of trying to determine the scope of the parameter values, now I "look to the left in the results table". The two screenshots below should illustrate this. (Screenshots are in Dutch. Specific information
is pixelated.)
Unfortunately, I am not able to post images. Once my account is verified, I will edit them in. For now, I hope the text speaks for itself enough.
[Screenshot: Drill-through parameters - 01: Report Builder tablix with subtotals]
[Screenshot: Drill-through parameters - 02: Textbox properties (selected in screenshot 01) - Action - Go to report]
The first screenshot shows the tablix in the Report Builder. The second screenshot shows the properties of the textbox selected in the first.
Notice that I do not pass parameters for the first two columns, but the actual values. I only pass the parameter (containing /all/ user-selected values) for the third column. In the textbox below the selected one, I pass the actual values for the first column,
and parameters for the last two. In the textbox above the selected one, I pass the actual values for all three columns.
The only (cosmetic) flaw this approach has is that in the drill-through report, the list of selected parameters might show values that do not occur in the (corresponding part of the) results, and only for those parameters for which the main report passes (all
user-selected) parameter values, and not the actual values in the results. The results are correct, though.
If there is a way to directly determine the scope of multi-value parameters for passing to a drill-through report, I would still like know. But for now, this seems to work.

BC Archive - problem with opening view object based on entity from archive

We have encountered a weird problem with a reusable BC library on different PCs.
Library was imported into a project following steps in section 25.7 of the ADF guide.
A view object was created using some of the entities from the library.
Model tested successfully with view object (using AppModule tester).
Page developed with no problems.
Application copied to a different PC.
BC JAR files set up in lib folder and removed/readded to application model project. When attempting to open view object, get the error below.
However, the View object still tests successfully using the AppModule tester.
The page using the View object still runs successfully.
I believe the problem is that when the archive was originally imported, it was imported from a different location. The Containees tag in the project .jpx file references that path name. But even when I edited the path name, I still could not open the view object. Do we have to remove and redo the import of the library each time the application is copied to a different machine?
Error when attempting to edit View Object:
oracle.jbo.dt.objects.JboException: The following object(s) referred to objects that could not be found:
com.guideworkstv.ibo.webstagemodel.AcctReqForReviewViewObj
com.guideworkstv.ibo.webstagemodel.AcctReqForReviewViewObj
Could not find the following referenced object(s):
com.guideworkstv.ibo.model.webstage.entities.IboAccountRequest
com.guideworkstv.ibo.model.webstage.entities.IboAccountRequest
     at oracle.jbo.dt.objects.JboException.throwException(JboException.java:81)
     at oracle.jbo.dt.objects.JboPackage.loadResolveReferencesXML(JboPackage.java:1397)
     at oracle.jbo.dt.objects.JboPackage.finishObjectsLoad(JboPackage.java:1042)
     at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:972)
     at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:951)
     at oracle.jbo.dt.objects.JboBaseObject.loadFromXMLFile(JboBaseObject.java:2615)
     at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:880)
     at oracle.jbo.dt.objects.JboPackage.checkForLoad(JboPackage.java:451)
     at oracle.jbo.dt.objects.JboPackage.findContainedObjectByName(JboPackage.java:440)
     at oracle.jbo.dt.objects.JboPackage.findObjectByName(JboPackage.java:1999)
     at oracle.jbo.dt.objects.JboApplication.findObjectByName(JboApplication.java:959)
     at oracle.jbo.dt.objects.JboUtil.fileURLToObject(JboUtil.java:510)
     at oracle.jbo.dt.jdevx.ui.JdxJboAddin$1.handleCopy(JdxJboAddin.java:997)
     at oracle.jdeveloper.compiler.CopyTranslator.handledByListeners(CopyTranslator.java:125)
     at oracle.jdeveloper.compiler.CopyTranslator.translate(CopyTranslator.java:263)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildGraph(UnifiedBuildSystem.java:300)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProjectFiles(UnifiedBuildSystem.java:516)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProject(UnifiedBuildSystem.java:609)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildAll(UnifiedBuildSystem.java:666)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.run(UnifiedBuildSystem.java:894)

We have resolved this problem by making sure that all machines have identical paths for both the working and the lib directories. It would be nice not to have to do this though.

SQL server report based on store proc not showing fields

Im working in SQL Server 2008 R2. Created stored proc (EXEC dynamic sql with CASE THEN ELSE ) on server with parameters works ok. But Report Builder on insert table not showing fields for arrange!
I found WORKAROUND http://forums.yessoftware.com/posts.php?post_id=115829
But there is a easy way?

I solved - add defaults to parameters and Report Builder can detect columns
Its a Report Builder bug - it not ask for parameters when refresh fields

List View Report with pipelined function in Mobile application and ORA-01007: variable not in select list

Hi!
I have a problem with List View Report in mobile application (theme 50 in apex) after updating to apex 4.2.2. I created Report -> List View. I used select from pipelined function in Region Source. Then when page is running and submited three times (or refreshed three times) I get an error:
Error during rendering of region "LIST VIEW".
ORA-01007: variable not in select list
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -1007
ora_sqlerrm: ORA-01007: variable not in select list
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 21230833903737364557
component.name: LIST VIEW
error_backtrace:
     ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 4613
     ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 3220
I get this error only when I use select from pipelined function in Region Source (for example: "select value1, value2 from table(some_pipelined_function(param1, param2)) ").
You can check it on http://apex.oracle.com/pls/apex/f?p=50591 (login - demo, password - demo).
In this application:
- I created package TAB_TYPES_PKG:
create or replace PACKAGE TAB_TYPES_PKG IS
TYPE cur_rest_r IS RECORD (
    STR_NAME          VARCHAR2(128),
    INFO              VARCHAR2(128)
TYPE cur_rest_t IS TABLE OF cur_rest_r;
END TAB_TYPES_PKG;
- I created pipelined function TEST_FUNC:
create or replace
FUNCTION TEST_FUNC
RETURN TAB_TYPES_PKG.cur_rest_t PIPELINED IS
r_cur_rest TAB_TYPES_PKG.cur_rest_r;
BEGIN
r_cur_rest.STR_NAME := 'ROW 1';
r_cur_rest.INFO := '10';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 2';
r_cur_rest.INFO := '20';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 3';
r_cur_rest.INFO := '30';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 4';
r_cur_rest.INFO := '40';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 5';
r_cur_rest.INFO := '50';
PIPE ROW (r_cur_rest);
RETURN;
END TEST_FUNC;
- I created List View Report on Page 1:
Region Source:
SELECT str_name,
       info
FROM TABLE (TEST_FUNC)
We can see error ORA-01007 after refresing (or submiting) Page 1 three times or more.
How to fix it?

Hi all
I'm experiencing the same issue. Predictably on every third refresh I receive:
Error
Error during rendering of region "Results".
ORA-01007: variable not in select list
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -1007
ora_sqlerrm: ORA-01007: variable not in select list
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 6910805644140264
component.name: Results
error_backtrace: ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 4613 ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 3220
OK
I am running Application Express 4.2.2.00.11 on GlassFish 4 using Apex Listener 2.0.3.221.10.13.
Please note: this works perfectly using a classic report in my desktop application; however, no joy on the mobile side with a list view. I will use a classic report in the interim.
My region source is as follows:
SELECT description AS "DESCRIPTION", reference AS "REFERENCE" FROM TABLE(AUTOCOMPLETE_LIST_VIEW_FNC('RESULTS'))
The procedure:
FUNCTION AUTOCOMPLETE_LIST_VIEW_FNC(
      p_collection_name IN VARCHAR2)
    RETURN list_row_table_type
AS
    v_tab list_row_table_type := list_row_table_type();
BEGIN
    DECLARE
      jsonarray json_list;
      jsonobj json;
      json_clob CLOB;
    BEGIN
      SELECT clob001
      INTO json_clob
      FROM apex_collections
      WHERE collection_name = p_collection_name;
      jsonobj              := json(json_clob);
      jsonarray            := json_ext.get_json_list(jsonobj, 'predictions');
      FOR i IN 1..jsonArray.count
      LOOP
        jsonobj := json(jsonArray.get(i));
        v_tab.extend;
        v_tab(v_tab.LAST) := list_row_type(json_ext.get_string(jsonobj, 'description'), json_ext.get_string(jsonobj, 'reference'));
      END LOOP;
      RETURN(v_tab);
    END;
END AUTOCOMPLETE_LIST_VIEW_FNC;
Thanks!
Tim

Separate App Module, View Object based on Select not EO: Best practice?

Hi,
I have a list of base tables(parameters) that are used everywhere in my application for selection components (List, Combo, Radio).
I'm considering creating a separate app module with a view object based on query for each table.
I have created a BaseTableAM application module for managing those tables, Entity objects and View Objects in update mode.
Those tables are rarely changed.
Example of table:
ItemType
item_type_id = primary key
name = description
In the BasetableAM:
ItemTypeEO entity object
ItemTypeVO updateable view object based on related entity object.
Now in my project I will create combo boxes for selection of the item_type_id.
Separate application module:
SelectionViewAM composed of View Objects based on Select statements and not on Entity Objects.
Example of view object ItemTypeViewVO:
SELECT ItemType.ITEM_TYPE_ID,
ItemType.NAME
FROM ITEM_TYPE ItemType
All view objects in this application module will be read-only and for selection only.
By basing all those View Objects on select statements not based on Entity Objects I suppose there will be no locking and "value changed" management => less overhead.
Is this a good practice?
Being read-only I could have based those View Object on Entity Object with flag updateable set to no, what would you recommend?
By creating a separate Application Module for those selection view objects, I know that update will not be possible.
Thank you for your advice.
Frederic

See this article for View Object tuning tips:
http://www.oracle.com/technology/products/jdev/tips/muench/voperftips/index.html
Are you planning to use this AM as a nested AM inside other application modules?
If you don't the "selection AM" will have its own, separate database connection/transaction.
If you do, it will share connection, transaction with its containing "root" AM.
It may not be relevant to your application, but just realize (which is explained in the article I point to above) that view objects that are not related to entity objects do not "see" pending changes in the current transaction. That feature depends on the VO/EO cooperation. It's fine to build VO's without an EO -- in fact we've made it easier to do this in 10.1.2 in the Design Time wizards -- but you just want to make sure you realize what features it's giving up. If you don't need those EO-related features, then by all means create an Expert Mode VO that's not related to EO's.

How create animated power view reports using sharepoint list as a data source in sharepoint 2010?

Hi All,
I got a client requirement to create reports using SharePoint List as data source. The report should show reflection depends on values changed (I mean animation).
I have heard about the power view/power pivot which does this kind of animations in reports.
Can someone please guide me on creating reports which shows animations
In power view/power pivot using SharePoint List as data source in SharePoint 2010.
Thanks in advance.
MercuryMan

Hi MercuryMan,
Yes, Power View, a feature of SQL Server 2012 Reporting Services Add-in for Microsoft SharePoint Server 2010 or SharePoint 2013 Enterprise Edition, is an interactive data exploration, visualization, and presentation experience.
It provides multiple views featuring tiles, slicers, a chart filter, and a number of visualizations, including cards, small multiples, and a bubble chart. So, we can use Power View to do intuitive ad-hoc reporting for business users such as data analysts, business
decision makers, and information workers.
Currently, Power View report only supports two types of data models: PowerPivot Worksheet, and data models based on Analysis Services Tabular Model or Multidimensional Cube.
In your scenario, you can create PowerPivot worksheets using SharePoint List as data source, deploy the PowerPivot worksheet to a SharePoint Library or PowerPivot Gallery, and then generate Power View reports based on the PowerPivot worksheets on the SharePoint
site.
To use SharePoint List as data source in Excel PowerPivot, you can refer to the following resource:
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/07/11/excel-services-using-a-sharepoint-list-as-a-data-source.aspx
http://technet.microsoft.com/en-us/library/hh230322.aspx
To create a Power View report based on PowerPivot model, you can refer to the following links:
http://technet.microsoft.com/en-us/library/hh231522.aspx
http://technet.microsoft.com/en-us/library/hh759325.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Crystal Report based on BW query

We create a Crystal report (CR 2008 ) with the main report based on on Bex Query on an SAP BW Server based on an infocube and a sub report based on an SQL relational table (Table, cluster or SAP Functions) on the same SAP BW Server. The execution is Ok on the Crystal Client but when we deploy on the InfoView portal (and on CMC) we have only one connection defined (it seems it detect that it was the same server name and keep only the first connection).

We don't use Universe (For Bex Query SAP don't recommande it) . The queries are directly embeded in the crystal report

Scheduled WEBI reports based on File Events not retrieving data

Dear All,
We are facing performance related issues with Scheduled WEBI reports based on file based events.
When running Web Intelligence on demand it takes 4to 5 Minutes.
Scheduling the same report in Excel format it takes more than 20 minutes.Schedule status showing success but no data found in Excel instance.
Env:BOXI3.1 Sp3
Windows 2003
It woud be great if any one can share your ideas.
Thanks,
Kumar

Hi Kumar,
Is your report has prompts?
if you have prompts , make sure that you assigned prompts in the schedule also.
Hope you have multiple webi processing servers and adpative job servers for better scheduling performance.
Try below solution .
On the BusinessObjects Enterprise server, navigate to the folder <install root>\Business Objects\BusinessObjects Enterprise 12.0\win32_X86\dataAccess\connectionServer
Open the file cs.config in a text editor such as Notepad
Search the file contents for the string "Traces Active"
Modify the line from <Traces Active="Yes"> to <Traces Active="No">
Save the cs.config file
Restart the Web Intelligence Processing Server

Creating a Form with Report based on View

Hi All,
I wanted to create a form with report based on two tables so:
1. I created a view (called COMBO) based on two tables
2. I then created a form with report based on the view
Everything seemed fine thus far until I tried to edit existing records - I got the error:
ORA-20505: Error in DML: p_rowid=2002082600001172, p_alt_rowid=REPATRIATION_ID, p_rowid2=, p_alt_rowid2=. ORA-01776: cannot modify more than one base table through a join view
Unable to process row of table COMBO.NB: REPATRIATION_ID is the primary key of the Repatriation table. The other table is Applicant.
& when I tried to create a new record - I got the error:
ORA-01776: cannot modify more than one base table through a join view
Unable to process row of table COMBO.Someone please enlighten me!
Kind Regards
Kamo
Edited by: Kamo on 2009/03/12 2:33 AM

Hello Kamo,
You need to create an 'instead of' (update/insert/delete) trigger on your view to process the inserts etc into the 'real' tables.
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

Can I pass parameters from a dashboard via a dashboard prompt and presentation variable to publisher report based on a data model with select statements in OBIEE 11g ?

I have a publisher 11g (v 11.1.1.7) report with a single parameter. The report is based on a data model not a subject area. I created a dashboard put a dashboard prompt and link to the report in separate section on the same page. The dashboard prompt sets a presentation variable named the same as the parameter in the report.
The problem was when I created the dashboard prompt, it forced me to select a subject area which I did (though did not want to) and then I created both a column and variable prompts. But clicking on the
report link completely ignored the value that I thought would be passed in the presentation variable to the report.
Side note : My report uses a pdf template for its layout where I have mapped the columns names from my data model to the form fields on the pdf form. I noticed that if I create a publisher report based on a subject area, then I do not have the choice to choose a PDF as a template type for my layout. (I only see BI Publisher Template as a choice).
I see some documentation online that suggest it could be done in 10g.
Thanks
M. Jamal

Ok,
I just tried that and it still doesn't pass anything to the prompt.
I changed the prompt to an edit field and I made the following weblink but when i click the link from an account it doesn't put anything in the prompt and all data for all accounts is shown.
This is the URL maybe I messed something up...
https://secure-ausomx###.crmondemand.com/OnDemand/user/Dashboard?OMTHD=ShowDashboard&OMTGT=ReportIFrame&SelDashboardFrm.Dashboard Type=%2fshared%2fCompany_########_Shared_Folder%2f_portal%2f360+Report&Option=rfd&Action=Navigate&P0=1&P1=eq&P2=Account."Account Name"&P3=%%%Name%%%
thanks

Viewing sub reports with Crystal Viewer XI

I am getting an error message when I try to open up a Crystal Report that has sub reports included.
"This report contains invalid subreport linking parameters."
Any ideas on how I can save report with sub-reports so that they can be read with Crystal Reports Viewer XI offline?

Hi Anders
Are you getting the error message in Crystal Report Designer or Crystal Report Viewer?
Would suggest you to follow the below steps in Crystal Report Designer:
-Create a fresh report,in which insert linked sub report based off your database.
-Create a fresh report,in which insert linked sub report based off Xtreme Sample Database.
With this we can narrow down the issue ,whether this error occurs with this particular report or all report?
Thanks
Asha Lund.
Edited by: Asha Lund on Jul 31, 2008 3:32 PM

Dymanic Parameters with a view, Report based on a proc

Similar Messages

Maybe you are looking for