Dynamic header based on frame

I have a report which has three layouts in the main section.Like topic A,B,C.I could generate all the three topics one after another by giving page breaks on the frames.But for each topic the header and footer changes.
on each frame's format trigger i tried to assign header values to a placeholder column or user parameter which is the source of the header field in the margin. But report builder says that i can't have output columns in format trigger. If there is a solution for this, please let me know.Thank you very much.
Sree.

Hi Sree,
You could try using the between pages Report Trigger. In the Object Navigator, click on Report_Name > Report Triggers > Between Pages.
Or, as a workaround, you could place your sections A, B, C in Header, Main and Trailer sections.
Hope this helps,
Navneet.

Similar Messages

Dynamic header based on the chosen Grid POV

Hello,
I have two grids Grid1 and Grid2. Both the grids have one editable POV and are different from each other. Either of the grids are being hidden based on a flag being input by the user.
I need to display the dimension name and the member name of the chosen Grid POV in a text box in the header. This needs to dynamically change based on the grid being displayed. e.g. If the Grid POV for Grid1 is "X" and for Grid2 is "Y", I need to display "X" when the grid2 is hidden and "Y" when grid1 is hidden. There is no conditional formatting on text boxes in headers. Is there any other way to do this?
Thanks,
Ravi B

Hi Ravi,
yes you can not apply conditional formatting on text boxes.
But it is possible to put the conditional formatting on the grid cell and then you can pick the text from grid cell into text box.
Hopefully this will solve your problem.
Regards,
Rahul

Dynamic header in oo alv print_top_of_page based on current line

I would expect this to be a common problem with the solution easily to google/find, but somehow...
dynamic header generation during alv print_top_of_page:
- i print an oo alv grid, sorted by kunnr
- for each new kunnr a new page
-> now I want during print-out to: at each top of page, read the first (or any) line of the current page, i.e. the current kunnr, and select data on basis of that kunnr to be written to the header.
My problem is that sy-tabix is not being filled correctly (always 1).
Strange thing is that in another report with a non-dynamic itab to display, sy-tabix is actuall being filled more or less correctly. (with the minor drawback that on the first page the tabix might not be 1 but more likely to be 2; but that's easy to fix and for the next pages sy-tabix is correct)
Kind regards, A
baanbrecher

In the handle_print_top_of_page method, use :
FIELD-SYMBOLS : <lv_line> TYPE ANY.
ASSIGN ('(SAPLKKBL)G_INDEX') TO <lv_line>.
if <lv_line> = 0. "First time, G_INDEX is equal to zero
<lv_line> = 1.
endif.
So in <lv_line> you will always have the good index of your table.

How can i create a dynamic structure based on my input from a select-option

Hello,
This is to develop a custom report in FI for G/L Balance based on company code.
I have an input select-option for Company code.
Based on the range of company code my output layout should be modified.
I am not very much sure to create a dynamic internal based on the input from a select-option.
Can any one please let me know how can i do this.
I would appreciate for anyone who turns up quickly.
Thank you,
With regs,
Anitha Joss.

See the following program, it builds a dynamic internal table based on the company codes from the select option.
report zrich_0001 .
type-pools: slis.
field-symbols: <dyn_table> type standard table,
               <dyn_wa>.
data: alv_fldcat type slis_t_fieldcat_alv,
      it_fldcat type lvc_t_fcat.
data: it001 type table of t001 with header line.
selection-screen begin of block b1 with frame title text-001.
select-options: s_bukrs for it001-bukrs.
selection-screen end of block b1.
start-of-selection.
select * into table it001 from t001
                 where bukrs in s_bukrs.
perform build_dyn_itab.
* Build_dyn_itab
form build_dyn_itab.
data: index(3) type c.
data: new_table type ref to data,
        new_line type ref to data,
        wa_it_fldcat type lvc_s_fcat.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = 'PERIOD' .
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
append wa_it_fldcat to it_fldcat .
loop at it001.
    clear wa_it_fldcat.
    wa_it_fldcat-fieldname = it001-bukrs .
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 4.
    append wa_it_fldcat to it_fldcat .
endloop.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
               exporting
                  it_fieldcatalog = it_fldcat
               importing
                  ep_table        = new_table.
assign new_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
Regards,
Rich Heilman

Integrating Wordpress into Muse need dynamic height based on content with cross domain

Since Muse doesn't currently support Blogs and Wordpress integration I have decided to use an iFrame.
My goal is to have the height of the iframe dynamically change based on the content in my Wordpress blog. I understand this is a common issue with frames that are hosted on different domains.
I am running into having to over compensate with a bunch of deadspace to allow enough room. Alternatively I get the horrible looking scroll bar.
I have tried using cross site scripting, JQuery and postMessage but am having trouble figuring out how to put the proper code into Muse and Wordpress for them to communicate back and forth.
Please, any help on this matter would be greatly appreciated.

Abhishek,
Thanks for your reply, however, it is not working with Muse. I added the Javascript to the head section and adjusted iframe and it displays as a small square in the upper left hand corner, unable to view the whole page.
Inserted into head section --
<script type="text/javascript">
function resizeIframe(obj)
obj.style.height = 0;
obj.style.height = obj.contentWindow.document.body.scrollHeight + 'px';
</script>
inserted as an html object --
<iframe name="MycoSmooth" src="http://www.mycosmooth.com" frameborder="0" scrolling="no" id="iframe" onload='javascript:resizeIframe(this);' />
Below is the result:
The purpose is to have an independent website run the blogging capabilities, since muse doesn't directly support blogging as of yet.
Since the site is on a different domain, I am running into cross domain issues and it won't get the height of the page. The methods that apparently work use php and I am unsure how that would work in muse, if at all.

Bex dynamic header problem

Hi All,
I have 2 problems..
1) I have to print the vendor statement of account for 1 year. Now for each vendor the vendor code name and address comes followed by other columns of account information related to it. My requirement is that i want the vendor code name and address to appear in header line and then all other information for that vendor comes beneath it. Meaning the vendor name and address comes in 1st line , and from 2nd line all account information related to that vendor comes. then say on 60th line another vendor name and address comes...and from 61st line accoutn information of the 2nd vendor comes.
How to do it???
2) i want to ghet dynamic header in the bex report based on the iunformation filled in the selection option. Eg: if user entered a posting date then that posting date should appear in the report header.
both these are urgent requirements....Plz help soon
Thanks & regards
Akash

Hi , thanks for ur reply but the Report designer is not working , givng me error
RFC destination NOT_CONFIGURED.
The main problem is i have to display the name and address of Vendor in a separate row i.e. vendor name and address shud appear in the row and then in following rows the other details.
Eg.
11000 Shashi Kapoor Jaipur         31.12.2006     doc no type etc
12000 Kamla Verma    Mumbai      12.10.2006    doc no type etc
Now final putput will be like
11000
Shashi Kapoor
Jaipur
31.12.2006    .................................
12000
Kamla Verma
Mimbai
12.10.2006.........................................
Thanks .

Dynamic Columns with dynamic header colspans

Hi All,
Our project requires creation of dynamic data table at runtime. Following are the requirements.
1.The number of columns and column headers should be dynamic. Basically the column headers are the Month names.
2.Some or All of the above displayed months can be further split into 3 columns based on further values selected by the user. The months to be split into 3 columns will be identified only at runtime based on some calculations. When this happens, that particular month header should span 3 columns and an additional header for the 3 split columns have to be displayed. Check the screen shot below.
----------------------------------------------------------------------------------|-------------|
Year: 2008 | Year: 2009 |
----------------------------------------------------------------------------------|-------------|
|Current Month | | |
-------------------------------------|--------------|-----------------------------|-------------|
Sep | Oct | Nov | Dec | Year Total| Jan |
------------------|------------------|--------------|-----------------|-----------|-------------|
| | |2008 |2009 |Total| | |
------------------|------------------|--------------|-----|-----|-----|-----------|-------------|
Old |New |Total|Old |New |Total | | | | | | |
Value|Value | |Value|Value| | | | | | | |
-----|------|-----|-----|-----|------|--------------|-----|-----|-----|-----------|-------------|
xx | xx | xx | xx | xx | xx | xx | xx | xx | xx | xx | xx |
-------------------------------------------------------------------------------------------------Points to be noted:
1.The colspan for the Year header is dynamic based on the months displayed for the previous, current, next year.
2.The ‘Current Month’ header is dynamic based on the month selected in the drop-down.
3.The colspan for the month is dynamic based on whether it is displaying single column or 3 columns
4.The header for the 3-column split is dynamic based on which are the months to be displayed with 3-column split.
5. Irrespective of the month selected, DEC is always split into 3 columns.
Is this achievable in JSF? Please let me know if anyone has worked on a similar requirement.
Thanks and Regards,
Anitha.

Hi charishma/Raymond,
Thanks for your response.
charishma,
I checked the link you provided and the code in that page. For me it looks like the colspan and rowspan are set by the user. Can it be done dynamically? I am still not in the development phase. I am still evaluating the possibilities. So it would be great if you can tell me if my requirements will be met with rich faces.
Raymond,
I am still in the evalution phase of whether this requirement is possible or not?
In short, my requirement is to display columns dynamically. Based on certain conditions, each of the column can be further split to 3 more columns with 3 sub-headers below the main header. There are 4-5 rows of headers available for which the colspan has to be calculated dynamically depending on the total number of columns.
The columns should be editable. i.e., the columns contain textboxes where the user can enter data. Again, the editable columns and non-editable columns are determined at run-time based on certain calculations.
Is this possible? If not, i need reasoning as to why it is not acheivable.
If it is not at all posible then the client is ready to compromise on the editing part. That is, data entry can be in a pop-up whereas, the the datatable should just display the data dynamically so as to print it for a report.
Please let me know the possibility of this requirement.
Thanks and Regards,
Anitha.

How to display dynamic header title in the report?

I have a req to display dynamic header title in the report.
When a id is entered in the prompt text, it will display the user data based on that user_id.
so similarly....the header title should vary each time when you select different user_id.
How can we implement this?

>
Zack H wrote:
> Lazaro,
>
> It depends on what you want displayed in the heading for each id.
> Please elaborate.
>
> Thanks,
> Zack H.
Zack..I have several projects listed under several project id's...
so when a user selects project id 00164 then it should display something like "Project document for Jon Doe"
again when the user selects project id as 00192 then it should display something like "project document for Zimmerman"
Did you get it??

Percent of SWF file played based on frames

I have a Flash file created with 585 frames. I'd like to show
the percentage played of the SWF file as it's playing based on
frames and not based on bytes loaded. I don't really need it to
play a preloader, I simply want to give the viewer an idea of how
far along they are as the SWF file is played.
Thanks for helping.

You just need to put a textfield on the Stage with the text
tool, and select 'dynamic' in the properties panel and give the
field an 'instance name' (I used percent_txt in the code below for
the instance name). select a font and size, etc. then embed the
font by selecting the 'embed' button and select 'numbers' and
'puncuation' (unless you wantto use other characters in the field).
that sets up a dynamic field, which is a field that you can 'put'
text into using script and change it when you want by assigning new
text to it.
and for the code, let's see ... use something like:

Dynamic Header help in PDF Portfolio

Need some help please, to create and load a Dynamic Header when creating a PDF Portfolio in LiveCycle ES2. Have input parameter of a [name] and an [image file] to place in the Header. Process flowing out of Assembler (PDF Generator). Currently other PDFs being inserted within the Portfolio, and Navigation parameter being received ok, and setting up custom navigation. Any help w/ creating Dynamic Header is very much appreciated.

By "Dynamic Header" do you mean the PDF cover page, or the interactive portfolio navigator?
If its the cover page then it should be a fairly easy thing to do. You can create a form (XDP or PDF template) with a field for the name and one for the image. Then you would use something like LC Forms or Form Data Integration to merge the data (image and name) with the template.
The one thing you would have to do is to put the image and data into an XML format before you merge it with the form. That means you will need to convert the image to a base64 encoded format. Fortunately there is a built in function for doing the conversion in a SetValue operation (its under Document Object Functions).
If you are talking about the Navigator (portfolio shell) then it gets a bit more tricky. The navigator is actually a Flex application and not a PDF. You'll have to code a new one using Flash Builder, then import the resulting .nav file into your LiveCycle application. Merging the data with it is not something I've done before, but it should be possible (the LiveCycle Interactive Statement Solution Accelerator does something similar).
If it is new navigator you need, check out some of the following links:
http://joelgeraci.com/adobe/devjunkie/web/portfolios_p1_outer.shtml
http://acrobatusers.com/tutorials/modifying-pdf-portfolio-navigator
http://acrobatusers.com/navigator-contest-faq (for the development software links)

Hide multiple rows in a dynamic table based on the row value.

Hi,
I need to hide multiple rows in a dynamic table based on the specific value of that row.
I cant find the right expression to do that.
please help

Go to the Row Properties, and in the Visibility tab, you have "Show or hide based on an expression". You can use this to write an expression that resolves to true if the row should be hidden, false otherwise.
Additionally, in the Matrix properties you should take a look at the filters section, perhaps you can achieve what you wish to achieve through there by removing the unnecessary rows instead of just hiding them.
It's only so much I can help you with the limited information. If you require further help, please provide us with more information such as what data are you displaying, what's the criteria to hiding rows, etc...
Regards
Andrew Borg Cardona

Dynamic LOV based on Current user

How do i make a dynamic LOV based on the user id of the current user.
Also how to insert values from a form into a database
Can anyone please help me out.
Thanks

Use portal.wwctx_api.get_user to get the currently logged in userid.
The simplest example of a form manipulating data is to create the form based on a table. All DML works automagically. You can base your form on a procedure with dummy columns and do your own DML if you wish. Lots more flexibility that way...

Creating a dynamic lov based on a column

Hi,
I want to create a dynamic lov based on a column in a database-table.
Eg. the query
'select code, description from code_table'
is the contents of the column 'lov_query' in the table 'parameters'.
For every parameter there can be a different lov-query, but the result is always
two columns (code and description, number and name, etc.), exactly what you need to use in a lov.
I've written a (dbms_sql) function that takes the parameter-id and returns the lov_query.
create or replace function "GET_PMR_LOV"
(pmr_id in NUMBER)
return VARCHAR2
is
cur INTEGER := DBMS_SQL.OPEN_CURSOR;
fdbk INTEGER;
l_pmr_id NUMBER(9) := pmr_id;
l_stmnt VARCHAR2(2000);
begin
DBMS_SQL.PARSE
(cur, 'select pmr.lov_query from parameters pmr where pmr.ID ' || ' = 'L_PMR_ID', DBMS_SQL.NATIVE);
DBMS_SQL.BIND_VARIABLE (cur, 'L_PMR_ID', l_pmr_id);
DBMS_SQL.DEFINE_COLUMN (cur, 1, l_stmnt, 2000);
fdbk := DBMS_SQL.EXECUTE (cur);
fdbk := DBMS_SQL.FETCH_ROWS (cur);
IF fdbk > 0
THEN
DBMS_SQL.COLUMN_VALUE (cur, 1, l_stmnt);
return (l_stmnt);
ELSE
return null;
END IF;
DBMS_SQL.CLOSE_CURSOR (cur);
END;
But now I'm stuck on how to pass on this statement in HTMLDB
as an dynamic lov, I don't seem to be able to execute this statement
into the two display and return columns. Any ideas?

Hello again,
This lov is on an updatable report-column where the user has to make a choice from an non-named, popup and query-based lov. In the lov-query box I have just put:
"return get_pmr_lov(:p41_param_id)" (without the quotes ;-)
Here's my latest version plus an alternative, which both seem to work fine:
create or replace function "GET_PMR_LOV"
(pmr_id in NUMBER)
return VARCHAR2
is
cur INTEGER := DBMS_SQL.OPEN_CURSOR;
fdbk INTEGER;
l_pmr_id NUMBER(9) := pmr_id;
l_stmnt VARCHAR2(1000);
begin
DBMS_SQL.PARSE (cur, 'select pmr.lov_query from paramaters pmr where pmr.ID ' || '= :L_PMR_ID', DBMS_SQL.NATIVE);
DBMS_SQL.BIND_VARIABLE (cur, 'L_PMR_ID', l_pmr_id);
DBMS_SQL.DEFINE_COLUMN (cur, 1, l_stmnt, 1000);
fdbk := DBMS_SQL.EXECUTE (cur);
fdbk := DBMS_SQL.FETCH_ROWS (cur);
IF fdbk > 0 THEN
DBMS_SQL.COLUMN_VALUE (cur, 1, l_stmnt);
return (l_stmnt);
ELSE
return null;
END IF;
DBMS_SQL.CLOSE_CURSOR (cur);
END;
create or replace function "GET_PMR_LOV2"
(pmr_id in NUMBER)
return VARCHAR2
is
l_pmr_id NUMBER(9) := pmr_id;
l_stmnt VARCHAR2(1000);
BEGIN
EXECUTE IMMEDIATE 'select pmr.lov_query from parameters pmr where pmr.ID = :1'
INTO l_stmnt USING l_pmr_id;
return l_stmnt;
END;
The error-message remains the same, unable to bind :p41_param_id !

SSRS 2008 R2 - Dynamic header data stays the same when exporting

Background:
I have a SSRS 2008 R2 report with a single Tablix.
The data is grouped by InvoiceID, with each appearing on a separate page.
I'm displaying some of the detail data in the group header row using Expressions similar to the following:
="Invoice # " & ReportItems!InvoiceID.Value"
The data referred to by my ReportItems statements are all hidden in the detail row (Advanced Mode, the Hidden Value for the Static Row Group is set to false).
Problem:
When I Preview the report in Visual Studio, everything looks as it should - the dynamic header data changes correctly with each group.
However, whenever I export the results (I've tried all the formats), the header data is the same for every group - its taking the values from the first group and using it in all the groups.
I've copied the same expressions into my Totals row, and the data is correct when exported; its only happening in my header rows.
Any help in resolving this is greatly appreciated, thank you.

Hi Alex,
According to your description, you have a header with expression contains ReportItems. Now you find it shows incorrect result when exporting to a file. Right?
In Reporting Services, it has reported some similar issue that the ReportItem returns unexpected result when exporting. In this scenario, since you just want to show the group name in each page as a header for detail rows. So you can make the
detail rows group on the Group. Then delete the Group column but still keep the group. After that add a row above detail row (Out side of group) and put in "=Fields!InvoiceID.Value". Now it will show the corresponding Group name
when you set page break between each group instance. We have tested this case in our local environment. Here are screenshots for your reference:
Reference:
SSRS
field expressions using ReportItem refrences have unexpected results when exporting
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Variable Text not working as dynamic header in Crystal report

Dear Experts,
I'm working Crystal report that connected to Query BEX SAP BW trough SAP integration kit,
currently i have case that need report dynamic header using variable text from BEX query, but seem the variable text not working in Crystal reports. the header in Crystal report shown as Desription\technical name, not result from the variable text in Query BEX in SAP.
In https://wiki.sdn.sap.com/wiki/display/BOBJ/Crystal%20Reports%20and%20BW%20query%20elements stated that the "Text variable" with "replacement path" is supported, but i don't know in my query is not working.
i already set in Database -> options-> table and fields -> Show Both, but the text variable still not working.
can you help me
Crystal Reports 2008 12.2.0.290
SAP Integration KIT 12.1.0.890
Thanks
Luqman

Post your question BEX and B1 and classic SAP data source issues to the Integration Kit forum

Dynamic header based on frame

Similar Messages

Maybe you are looking for