Dynamic redeployment of exploded application

Hi
I am trying to configure weblogic (6.0sp1) for dynamic deployment of my
application.
For convenience of source management, i got my web-apps + ejbs in different
directory other than "/config/domain_name/applications".
Now weblogic document says, application should be in
"/domain_name/application" folder, for dynamic redeployment.
Is it possible to redeploy dynamically if my EJBs class files are different
directory.
I am using exploded form of deployment.
ps. I hope it's not a issue with 6.0sp1?
Thanks
Ashish Jain

Hi,
Here We have called javascript function('setFlashHeight') from Flex, and pass the param to the javascript function like: index, height
Flex:
Index: embed swf name
height: set value of swf height
javascript:
divid: id of the div containing the flash movie.
Flex Code:
ExternalInterface.call("setFlashHeight","index",height);
JavaScript Code:
function setFlashHeight(divid, newH){
$(divid).style.height = newH+"px";

Similar Messages

Dynamic redeploymeny of exploded applications

Hi
I am trying to configure weblogic (6.0sp1) for dynamic deployment of my
application.
For convenience of source management, i got my web-apps + ejbs in different
directory other than "/config/domain_name/applications".
Now weblogic document says, application should be in
"/domain_name/application" folder, for dynamic redeployment.
Is it possible to redeploy dynamically if my EJBs class files are different
directory.
I am using exploded form of deployment.
ps. I hope it's not a issue with 6.0sp1?
Thanks
Ashish Jain

They need to be in the applications directory, or a subdirectory.
Seth
Ashish Jain wrote:
>
Hi
I am trying to configure weblogic (6.0sp1) for dynamic deployment of my
application.
For convenience of source management, i got my web-apps + ejbs in different
directory other than "/config/domain_name/applications".
Now weblogic document says, application should be in
"/domain_name/application" folder, for dynamic redeployment.
Is it possible to redeploy dynamically if my EJBs class files are different
directory.
I am using exploded form of deployment.
ps. I hope it's not a issue with 6.0sp1?
Thanks
Ashish Jain

Partial redeploy of an application ear fails intermittently

Hi,
I am trying to redeploy my application ear using deployment API provided by weblogic. The list of files which i try to redeploy are couple of jars and couple of wars one at a time. The problem is most of the times the deployment paritally goes through informing me that weblogic has transitioned application status from activated at last. But in some cases i see "<b>javax.management.InstanceAlreadyExistsException"</b> though the application is already present. Why does this happen where in the handle to ApplicationMBean tries to register the application as though it was new which is not the case. Check the exception below.
javax.management.InstanceAlreadyExistsException: vgndomain:Location=VgnVCMServer,Name=VgnVCMServer_VgnContentSvcs,ServerRuntime=VgnVCMServer,Type=ApplicationRuntime
     at com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:134)
     at com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.java:2371)
     at com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:876)
     at weblogic.management.internal.RemoteMBeanServerImpl.private_registerMBean(RemoteMBeanServerImpl.java:582)
     at weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBeanServerImpl.java:524)
     at weblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelegate.java:166)
     at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:122)
     at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:85)
     at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:62)
     at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:74)
     at weblogic.j2ee.J2EEApplicationRuntimeMBeanImpl.<init>(J2EEApplicationRuntimeMBeanImpl.java:42)
     at weblogic.j2ee.J2EEApplicationContainer.initRuntimeMBean(J2EEApplicationContainer.java:781)
     at weblogic.j2ee.J2EEApplicationContainer.<init>(J2EEApplicationContainer.java:448)
     at weblogic.j2ee.J2EEApplicationContainerFactory.createApplicationContainer(J2EEApplicationContainerFactory.java:131)
     at weblogic.j2ee.J2EEApplicationContainerFactory.getOrCreateApplicationContainer(J2EEApplicationContainerFactory.java:113)
     at weblogic.management.deploy.slave.SlaveDeployer$Application.getContainer(SlaveDeployer.java:3011)
     at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2550)
     at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
     at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
     at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Any help on this would be appreciated.
Thanks,
Sandeep

The info for the 149080 error is included below:
Basically, you can only do a partial redeploy if you are using an exploded directory app.
Error: A partial update of an archived application is not allowed. Application app cannot be redeployed.
Description
     There was an attempt to partially redeploy an archived application. Partial redeployment of an archived application is not allowed.
Cause
     There was an attempt to partially redeploy an archived application
Action
     Try deploying entire application
Refer to the deployment documentation for more info.
http://download.oracle.com/docs/cd/E11035_01/wls100/deployment/redeploy.html#wp1031505
8.1.2.2 Partial Redeployment of J2EE Modules
Partial redeployment also enables you to redeploy a single module or subset of
modules in a deployed Enterprise Application. Again, partial deployment is
supported only for applications that are deployed using an exploded archive directory.

Dependency Package in Exploded Application WLS6.1sp2

I am working with the sample application used in Chapter 24 of Professional
Java Server Programming J2EE 1.3 Edition. The application is a test for
displaying ClassLoader information for ejb and web modules and their
associated dependent packages. I am able to deploy the packaged EAR without
a problem under WLS 6.1sp2, but when I attempt to deploy the same
application in exploded format, I am getting a NoClassDefFoundError during
deployment of the ejb module. The manifest files are unchanged and the
dependent jar files are located at the root of the exploded application...
below is a sample of the directory structure.
My question is, where should I put dependent classes and/or packages in an
exploded application and how do I setup the manifest to load them?
Thanks in advance for any help,
Tim Kuntz
\ear_root
Util1.jar
Util3.jar
Util6.jar
Util7.jar
\ejb
\depend1
\META-INF
MANIFEST.MF
Manifest-Version: 1.0
Class-Path: Util1.jar Util3.jar Util6.jar Util7.jar
http://www.theserverside.com/resources/articles/J2EE-Deployment/chapter.html

Here is the answer I received from a BEA Developer Relations Engineer
regarding this...
"When you deploy the EAR file, it is deployed under one classloader. When
you deploy the EAR file in the exploded format, then each EJB jar file is
loaded in a separate classloader. As long as the dependent (helper) classes
are in the classpath, you can always redeploy the EJB jar file, but if you
want to make changes to the dependent class then you have to restart the
WebLogic Server."
"Tim Kuntz" <[email protected]> wrote in message
news:3c616a90$[email protected]..
I am working with the sample application used in Chapter 24 ofProfessional
Java Server Programming J2EE 1.3 Edition. The application is a test for
displaying ClassLoader information for ejb and web modules and their
associated dependent packages. I am able to deploy the packaged EARwithout
a problem under WLS 6.1sp2, but when I attempt to deploy the same
application in exploded format, I am getting a NoClassDefFoundError during
deployment of the ejb module. The manifest files are unchanged and the
dependent jar files are located at the root of the exploded application...
below is a sample of the directory structure.
My question is, where should I put dependent classes and/or packages in an
exploded application and how do I setup the manifest to load them?
Thanks in advance for any help,
Tim Kuntz
\ear_root
Util1.jar
Util3.jar
Util6.jar
Util7.jar
\ejb
\depend1
\META-INF
MANIFEST.MF
Manifest-Version: 1.0
Class-Path: Util1.jar Util3.jar Util6.jar Util7.jar
http://www.theserverside.com/resources/articles/J2EE-Deployment/chapter.html
>
>

Dynamic JDBC credentials example application from Steve Muench

Apologies for this newbie question...but I'm trying to understand the Dynamic JDBC credentials example application from Steve Muench:
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#14
I think I understand most of it but the one bit I dont understand is why it customizes the ADF Page Lifecycle (DynamicJDBCADFPhaseListener, DynamicJDBCPageLifecycle, DynamicJDBCPageLifecycleContext).
Can anyone explain to an ex-forms developer why this code is there?
I'm also trying to work out a way for the session to be invalidated when the user logins again
e.g. a user logins, he doesnt use the logout function but uses the back button to go back to the login page. when he logs in with another set of credentials, would a new session start or as i supsect, it would use the original login credentials?
Thanks

You can ignore those three classes in the example. They are not related to the dynamic credential solution, and must have been left over from some other example I evolved into what you see. Sorry to have cluttered up the implementation with stuff that isn't really contributing to the actual solution. DOH!

Static File in Exploded Application

I am trying to read a gif from an exploded application.
The exploded application is recognized ( I can view it's index.html page. ), but I can not view a gif that is part of the app.
Any suggestions? Is there some special configuration that is necessary for static files?

Hattie <[email protected]> wrote:
I am trying to read a gif from an exploded application.
The exploded application is recognized ( I can view it's index.html page.
), but I can not view a gif that is part of the app.
Any suggestions? Is there some special configuration that is necessary for
static files?Where are gif's located and how are referring those gif's in your html page?
Kumar

Dynamic Reloading of Web Applications

Should I be able to trigger dynamic reloading of web applications by "touching" the related web.xml file? It doesn't appear to work under Win2K server, JWS 6.1 SP4.
When I "touch" a related servlet class file under the WEB-INF directory, it seems to trigger reloading of all applications under that virtual server. Is that expected behavior?
Is there any other method of triggering dynamic reloading of web applications?

I have not really tested in in V6.1 but in V6.0 it was possible to add the line into web-apps.xml file with the following:
<class-loader reload-interval="XX"/>
where XX is seconds between reloads. i.e. 3600 to reload every hour.
In V6.1 that setting is in server.xml
and is called "dynamicreloadinterval". You can try playing with it. But as I said I have not really tested how that works...
Regards,
Sasha aka ttalex

Dynamic configuration for the application

I'm a newbie and trying to evaluate JSF. I took part in a project with struts framework and i could say i don't like struts cause of some limitation and i suspect that JSF has the same limitation. First of all, there are JSP pages. I can't use JSP pages/templates stored somewhere else except web application. I'd like to store my templates in the database. This will give me ability to add/change/remove jsp page without redeploying war-archive. Yes, i can use exploded war-archive and add JSP pages straight into file system, but i don't like this way. Next problem is the configuration file like struts-config (faces-config, whatever). I have to write down all my navigation logic and beans mapping to this file and it's really annoying me. This kind of project requires dynamic configuration for the all web application and i'd like to add/change/remove pages, beans, actions without restarting/reconfiguring webapp. Today, I looked thru documentation and source code and found that FactoryFinder class could use my own classes but i'm not sure it will be enough for the dynamic configuration for the beans. In any case, it's a huge problem with the templates.
Right now i'm thinking about 1(one) JSP with XML/XSLT rendered HTML content and JSF for event/action handling. I mean, i'll use XSLT to render dynamic content and JSF for dispatching events. In that case i have to render form tag names in the HTML as JSF engine (i'm not sure if it possible). If it will take a lot of time to do this i'll have to switch a home-grown framework.
So, i really need advices how to implement this sort of dynamic behavior in the web application.
regars,
anton

A lot of what you're seeing are genuine limitations, but happily, JSF is so pluggable that you can overcome them.
JSPs are problematic in exactly the way you describe - unless your app server has support for pulling JSPs out of a database, etc., you're SOL. JSF, however, lets you use something other than JSPs by replacing the ViewHandler. That's a fair bit of work, but it is doable.
For navigation logic, you'd replace the NavigationHandler. As long as you're willing to write the code that can pull navigation rules from an external source, life is good.
For managed beans, all you need to replace is the VariableResolver - again, if you can pull the rules from an external source, you have full control.
This is all far from easy - and it's a huge amount of work for one person - but I'd imagine these pieces will become available from various sources. A core goal of JSF 1.0 was making the framework as a whole pluggable so that others can innovate on top of the framework.
-- Adam Winer (EG member)

Redeploying of exploded EJBs within an exploded EAR

Hi all,
I've an exploded EAR application which has an exploded EJB. Inside my exploded EJB, I've a META-INF folder with a REDEPLOY file, if I update my EJB & touches the REDEPLOY file inside the META-INF, the EJB doesn't get redeployed. I'd to touched the REDEPLOY inside the META-INF folder of the exploded EAR, is this behavior correct?
Or am I missing something here?
Thanks!

Hi,
If you are only attempting to read the file, you should read the file as a resource. If you are planning on writing to this file, then it is not a good idea that you depend on where this file is deployed, just place it anywhere else.
Anyhow, if you have to do it, the best way is to obtain the resource URL, and from that the file name. BTW, there is no warranty that the war will get exploded, that you may be able to freely modify the file, nor that the file name be null :-S
{the Classloader of your choice}.getResource(<Resource name>).getFile()
should do the trick.
Regards,
LG

Redeploy of exploded enterprise app

Hi people
I`m working with WL6.1sp1 on WinNT and Solaris.
I would like to deploy a web application and several ejbs so that:
1 there is no long copying of files when the server starts.
2 web components can use ejb components.
3 everything (html, jsp, servlets, page beans, ejbs) is hot-updatable without
much trouble.
The closest approximation that I have arrived at is using an exploded enterprise
application containing an exploded web application and several pack ejb jars.
I use auto-deploy.
html, jsp, servlets, and page beans can be updated simply by copying the new files
in the right places.
But how can I update an EJB-jar?
I tried simply replacing the EJB-jar, deploying and undeploying the EJB in the
console, and touching a REDEPLOY file sitting in the root of the enterprise application.
Still, clients see the old ejb!
Thanks in advance for any help.
Alex

If you are running in the Development mode, then you should be able to update your ejb by
copying a new jar over it and then by undeploying and deploying through the console. or you
can use the weblogic.deploy utility to hot deploy the ejb.
Touching the REDEPLOY file is meant only for webApps.
thanks,
Mihir
Alexander Bunkenburg wrote:
Hi people
I`m working with WL6.1sp1 on WinNT and Solaris.
I would like to deploy a web application and several ejbs so that:
1 there is no long copying of files when the server starts.
2 web components can use ejb components.
3 everything (html, jsp, servlets, page beans, ejbs) is hot-updatable without
much trouble.
The closest approximation that I have arrived at is using an exploded enterprise
application containing an exploded web application and several pack ejb jars.
I use auto-deploy.
html, jsp, servlets, and page beans can be updated simply by copying the new files
in the right places.
But how can I update an EJB-jar?
I tried simply replacing the EJB-jar, deploying and undeploying the EJB in the
console, and touching a REDEPLOY file sitting in the root of the enterprise application.
Still, clients see the old ejb!
Thanks in advance for any help.
Alex

Error creating dynamic page in an application with a schema other than portal30

Running 9iAS 1.0.2.2 on Solaris.
Database 8.1.7.1
I cannot seem to create a default dynamic page (select 'x' from dual) in an application that has a schema (e.g. test) other
than portal30. The error seems to be when portal tries to compile the dynamic-page package, it references itself from
within the package but prefixing the call with the other (test) schema. It never seems to compile? What seems to be the
problem? Any ideas?

If you are using any database object other than the applcation owned,then it has to be prefixed with the schema owner.
For example,
if the application schema is based on the schema "schema1" (say)
and your query is based on one of the object on "schema2"
and if you have necessary privilegves to access that object from schema2, then the compiler wont throw any error.
Can u explain, what u problem you are experiencing in detail?
(Also, if u give me the portal version, I can cross-verify that).

Dynamically Reading Files From Application Server

Hi Experts,
Presently I have to write a program which reads files from the application server dynamically. This program will be scheduled in the background with the frequency of half an hour.
I am Using the function module
CALL FUNCTION 'SUBST_GET_FILE_LIST'
EXPORTING
DIRNAME = '/usr/sap/xxx/xxx/'
FILENM = 'DATASET'
PATTERN = '.txt'
TABLES
FILE_LIST = IT_FILELIST
I am facing problem in specifying the parameter FILENM in the function module,
As I have to read many files from the apps server. How to assign the parameter of function module so it can take the many files generated in the apps server.
Thanks in Advance,
Regards,
Irfan Hussain

Hi,
Instead of the above FM, you can use the following code :
AT SELECTION-SCREEN ON VALUE-REQUEST FOR po_ifile.
PERFORM get_current_directory USING 'PO_IFILE'   po_ifile
                                          rov-home_dir rov-curr_dir.
    PERFORM get_filename-of-server TABLES itab_filename
                                       USING rov-curr_dir rov-gen_name.
    PERFORM help_values_get_with_table_ext TABLES itab_filename
                                       USING rov-curr_dir
                                                   po_ifile.
*&      Form get_current_directory
      text
     -->P_0023   text
     -->P_PO_IFILE text
     -->P_ROV_HOME_DIR text
     -->P_ROV_CURR_DI text
     -->P_CALL text
     -->P_FUNCTION text
     -->P_0029   text
     -->P_IMPORTING text
     -->P_FILE_NAME text
     -->P_= text
     -->P_PO_IFILE text
FORM get_current_directory USING _fieldname
                                    _filename
                                    homedir
                                    currdir.
    IF _fieldname <> space.
      PERFORM dunp_value_read USING _fieldname _filename.
    ENDIF.
    IF _filename = space.
      currdir = homedir.
    ELSE.
      rov-work_dir = _filename.
      rov-fdpos = STRLEN( rov-work_dir ).
      DO.
        IF rov-fdpos = 0.
          EXIT.
        ENDIF.
        rov-fdpos = rov-fdpos - 1.
        ASSIGN rov-work_dir+rov-fdpos(1) TO <rov_p>.
        IF <rov_p> = rov-delchar.
          <rov_p> = space.
          EXIT.
        ELSE.
          <rov_p> = space.
        ENDIF.
      ENDDO.
      currdir = rov-work_dir.
    ENDIF.
ENDFORM.                    " get_current_directory
*&      Form get_filename-of-server
      text
     -->P_ITAB_FILENAME text
     -->P_ROV_CURR_DIR text
     -->P_ROV_GEN_NAME text
FORM get_filename-of-server TABLES nametab STRUCTURE itabfilename
                              USING _dirname _genname.
    CALL 'C_DIR_READ_FINISH'             " just to be sure
                           ID 'ERRNO' FIELD rov-errno
                           ID 'ERRMSG' FIELD rov-errmsg.
    CALL 'C_DIR_READ_START' ID 'DIR'    FIELD _dirname
                            ID 'FILE'   FIELD _genname
                            ID 'ERRNO' FIELD rov-errno
                            ID 'ERRMSG' FIELD rov-errmsg.
    IF sy-subrc <> 0.
      EXIT.
    ENDIF.
    REFRESH _nametab.
    DO.
      CLEAR _nametab.
      CALL 'C_DIR_READ_NEXT' ID 'TYPE'   FIELD _nametab-type
                              ID 'NAME'   FIELD _nametab-name
                              ID 'LEN'    FIELD _nametab-len
                              ID 'OWNER' FIELD _nametab-owner
                              ID 'MTIME' FIELD _nametab-mtime
                              ID 'MODE'   FIELD _nametab-mode
                              ID 'ERRNO' FIELD _nametab-errno
                              ID 'ERRMSG' FIELD _nametab-errmsg.
      _nametab-dirname = _dirname.
      MOVE sy-subrc TO _nametab-subrc.
      CASE sy-subrc.
        WHEN 0.
          IF _nametab-name+0(1) = '.'.
          ELSE.
            APPEND _nametab.
          ENDIF.
        WHEN 1.
          EXIT.
        WHEN OTHERS.                     " SY-SUBRC >= 2
          EXIT.
      ENDCASE.
    ENDDO.
    CALL 'C_DIR_READ_FINISH'             " just to be sure
                           ID 'ERRNO' FIELD rov-errno
                           ID 'ERRMSG' FIELD rov-errmsg.
ENDFORM.                    " get_filename-of-server
*&      Form help_values_get_with_table_ext
      text
     -->P_ITAB_FILENAME text
     -->P_ROV_CURR_DIR text
     -->P_PO_IFILE text
FORM help_values_get_with_table_ext TABLES _filename
                                             STRUCTURE itab_filename
                                      USING _currdir
                                            _selfile.
    TYPES: BEGIN OF f4typ_head_struc,
             tabname LIKE help_info-tabname,
             fieldname LIKE help_info-fieldname,
             head_text LIKE shstruc-keyword,
           END OF f4typ_head_struc.
   DATA itab_fields    LIKE TABLE OF help_value        WITH HEADER LINE.
   DATA itab_selvals   LIKE TABLE OF help_vtab         WITH HEADER LINE.
   DATA itab_values    LIKE TABLE OF rlgrap-filename   WITH HEADER LINE.
   DATA itab_header    TYPE TABLE OF f4typ_head_struc WITH HEADER LINE.
    REFRESH itab_fields.
    REFRESH itab_selvals.
    REFRESH itab_values.
    REFRESH itab_header.
    itab_fields-tabname    = 'PS0192'.
    itab_fields-fieldname = 'BAA01'.
    itab_fields-selectflag = ' '.
    APPEND itab_fields.
    itab_fields-tabname    = 'RLGRAP'.
    itab_fields-fieldname = 'FILENAME'.
    itab_fields-selectflag = 'X'.
    APPEND itab_fields.
    LOOP AT _filename.
      itab_values = itab_filename-type.
      APPEND itab_values.
      itab_values = itab_filename-name.
      APPEND itab_values.
    ENDLOOP.
    CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE_EXT'
       EXPORTING
        CUCOL                         = 0
        CUROW                         = 0
        DISPLAY                       = ' '
        FIELDNAME                     = ' '
        TABNAME                       = ' '
        TITLE_IN_VALUES_LIST          = ' '
        SHOW_ALL_VALUES_AT_FIRST_TIME = ' '
        USE_USER_SHRINKING            = ' '
            titel                         = _currdir
        NO_SCROLL                     = ' '
        NO_CONVERSION                 = ' '
        NO_MARKING_OF_CHECKVALUE      = ' '
       IMPORTING
            index                         = rov-index
            select_value                  = rov-selvalue
         TABLES
              fields                        = itab_fields
              select_values                 = itab_selvals
              valuetab                      = itab_values
        HEADING_TABLE                 =
         EXCEPTIONS
              field_not_in_ddic             = 1
              more_then_one_selectfield     = 2
              no_selectfield                = 3
              OTHERS                        = 4.
    IF sy-subrc = 0.
      CLEAR itab_filename.
      READ TABLE itab_filename INDEX rov-index.
      IF itab_filename-type+0(3) = 'dir'.
        CONCATENATE _currdir rov-delchar rov-selvalue rov-delchar
                                                      INTO _selfile.
      ELSE.
        CONCATENATE _currdir rov-delchar rov-selvalue INTO _selfile.
      ENDIF.
    ENDIF.
ENDFORM.                    " help_values_get_with_table_ext
Best regards,
Prashant

Using Dynamic Text In iOS Applications

Hey everyone,
I'm trying to create a simple iOS app. I want to add a Dynamic Text box into the stage that will show the score, but every time I do so, the application encounters serious lag trouble. I'm using _sans font.
Does anyone have a method for using Dynamic Text that works well in iOS?

I had lots of lag when I used a TLF textfield... but decent performance when I used a "classic" TextField.

Dynamic Reports in java application

Hi,
I want to create dynamic reports in an java standalone application, I have downloaded the Jfreereport <http://sourceforge.net/projects/jfreereport>
I'm not sure, whether it could get data from a JDBC source. (or is there anyother solution to generate dynamic reports in a java application?).
Thanks in advance,
Payam

I generate reports from a webserver ( Tomcat ) in PDF using iText ( www.lowagie.com/iText ). It works great. JFreereport is also using this iText and you shouldn't have any problems using JDBC. Try to read the tutorial first about iText first. This will give you an idea how JFreereport works.
- Dieter

Dynamic Calc in Multicurrency Application

Hi,
i have a multicurrency application in my version 11.1.1.1. All dimension members of my Entity are of Store type. But in one case i need the children to be added up and stored into their parent member. Accordingly when i made the parent Dynamic Calc and Store and used it in a data form. But when i give data it does not calculate the children, it gives ar error message-
The dataform is not valid, pls check log....
Any help to resolve this?
Thanks.

Hi,
I am not sure of the error you are getting but do you have have the members as dynamic calc and store, could you not set them to "Never Share" and then just aggregate the children using calc members on form or using a business rule to run after the data in the form has been entered?
Cheers
John
http://john-goodwin.blogspot.com/

Dynamic redeployment of exploded application

Similar Messages

Maybe you are looking for