Dynamic user creation

hi all,
i need to dynamicaaly create a username in incremental order on every click of the jsp.how do i do that

You need to provide more meaningful details.
"create a username" on its own doesn't make sense.
Neither does "on every click of the jsp".

Similar Messages

  • Dynamic user profile

    I have installed and configured Kanaka plug-in and my nds users can now login and see their home folders. However, they cannot launch any local applications eg. TextEdit generates a message "TextEdit quit unexpectedly" and so does Opera, Firefox always tries to create a new profile and then gives a "Profile Creation failed" due to chosen folder not being writable and MS Word will always bring the initial setup screen up but never actually loads. Is there something I have to do within Kanaka to give the dynamic users more rights. We are trying to implement this for students using our public Macs so we don't want them to have administrator privileges but they do need to be able to launch programs. Thanks

    andyh100,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Disable caching ACS dynamic users

    Hi all!
    I have an ACS 3.3(2)b2 what use AD as an external DB. I experianced, that dynamic users created after successful authentication from the AD, and these users don't purge themself from the ACS internal DB. I did a test environment, and the same thing happened. I upgraded the ACS to 4.0, and the same thing happened.
    I find a mention in the ACS4.0 user guide, what says the following:
    "Users that are dynamically mapped will keep on being dynamically mapped even when their group
    mapping settings are modified to a group which is set to Disable caching of dynamically mapped users."
    So my question is, where can I disable caching of dynamically mapped users?
    Thanks a lot for the answers!
    By(e)
    Miki

    Miki,
    This is a feature that is added on ACS 4.2 see the release notes below:
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html#wp90436
    Option of disabling caching of dynamic users-Administrators can determine whether they want to disable the creation of dynamic users while using an external database for authentication. Minimal performance disruption occurs when disabling caching of dynamic users.

  • RE: dynamic widget creation

    This is a good tech note about this on the Forte website.
    -----Original Message-----
    From: Matthew Middleton [SMTP:[email protected]]
    Sent: Friday, 25 June 1999 11:11
    To: [email protected]
    Subject: dynamic widget creation
    I have done a few windows with dynamic widget creation. Sometimes it
    seems I have to have done self.Open before, to get things to appear
    properly, and sometimes not.
    What I would like is a summation of the issues involved here so I can
    write such code without resorting to trial and error.
    with advance appreciation,
    Matthew
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive
    <URL:http://pinehurst.sageit.com/listarchive/>-
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Tech Note 5156, which I have attached for your information.
    -----Original Message-----
    From: Foster, Todd [SMTP:[email protected]]
    Sent: Saturday, 26 June 1999 1:27
    To: 'Jason de Cean'
    Subject: RE: dynamic widget creation
    ? What technote ?
    -----Original Message-----
    From: Jason de Cean [SMTP:[email protected]]
    Sent: Thursday, June 24, 1999 9:19 PM
    To: 'Matthew Middleton'
    Cc: 'Forte Users'
    Subject: RE: dynamic widget creation
    This is a good tech note about this on the Forte website.
    -----Original Message-----
    From: Matthew Middleton [SMTP:[email protected]]
    Sent: Friday, 25 June 1999 11:11
    To: [email protected]
    Subject: dynamic widget creation
    I have done a few windows with dynamic widget creation. Sometimes
    it
    seems I have to have done self.Open before, to get things toappear
    properly, and sometimes not.
    What I would like is a summation of the issues involved here so Ican
    write such code without resorting to trial and error.
    with advance appreciation,
    Matthew
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive
    <URL:http://pinehurst.sageit.com/listarchive/>-
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>

  • Multiple user creation in R12 and migration of users

    I would like to know how we can automate a process of user creation in R12, or is there a way to create multiple users in Ebiz with respective responsibilities.
    Second case is, migration of users from one instance to another. The problem out here is selective users not all?
    Regards

    Pl search the forums for FND_USER package - you will find several hits that show how this package can be used in a programmatic fashion to bulk create new users and assign responsibilities. Examples are also available on My Oracle Support.
    To migrate user, use FNDLOAD. See this doc - you will also find hits in these forums if you search.
    376469.1 - Can FNDLOAD Migrate User Accounts Without Forcing Users To Change Their Passwords?
    HTH
    Srini

  • No active writeable datasource found for user creation, check your Persiste

    HI SAP Guru's
    Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
    You are not authorized to access this application; contact your system administrator
    and when I am going to create user in identity management I am getting below error
    Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
    I have searched all related treads in SDN but no success
    Please help.
    Thanks & Regards
    Vinay Patel

    Dear all,
    I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
    1. Go to portal  http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
    - select configuration
    - folder "sap system based in abap"
    - do the conection test
    If the test fails, log on in client 001 and change user SAPJSF:
    - assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
    - you can change the password too
    STOP/START ABAP+JAVA
    Go again to the portal above and test connection again. The tests should now be OK.
    2. Go to portal  http://<portal>/irj
    - Log on with administrator user
    Now you should be able to create an user.

  • New sap user creation

    Hi All SAP experts,
    My company has implemented 2 Systems SAP Landscape with one development and one production server which are running on R/3 Enterprise 4.7 (Kernel Release 6.20) with Microsoft SQL 2000 as database server.
    I have the following questions regarding new sap user creation by using user copy function.
    1.When I request to create new SAP User by using user copy function ,should I just create the user acct in DEV and transport it to PROD System? If yes, how could I do that?
    2.When I request to create new SAP User by using user copy function, can I just create it on PROD System only? If yes, what is the impact?
    3.When using User copy function to create new user acct, should I select all parts (like adress ,defaults,reference user, user groups.....) of the existing user to be cloned to new user acct?
    Thanks.
    Leon

    Hi Leon,
    Answer to your questions in their respective order:
    1. You can create user in DEV and then make remote client copy to PRD system using scc9 t-code. Here you can choose user accounts and authorizations for the copy. ( Rem: Data will be overwritten in target system when copied).
    You can also use client export/import(scc8/scc7)
    But, When you do the client import from the exported files using STMS,you will have to select only one of the transport requests and then STMS automatically selects the other requests for you.
    Then it will show you the different transport requests that you have created during your export, the client copy profile and the target system and client. The customizing and application data is deleted in the target client before copying for all profiles except SAP_USER. This is technically unavoidable (and hence the data will be overwritten).
    So if you can afford overwritting of user data in target client , you can go with the above procedure.
    2. Using  user copy in su01, you can copy one user to another user only in that client and is confined to that system only. So yes, If you want 2 or more users to have same authorizations, profiles ,etc etc.. you can choose this in PROD system.
    3. It depends.. If you want user to be in same group, then you can choose user groups. If you want them to have same authorizations , you can choose roles and profiles... If you want them to have same company address and others,... you can select address.. and so on.
    Also below link provides required steps in case you choose local/ remote client copy:
    http://www.sap-basis-abap.com/bc/client-copy-by-using-scc8-and-scc7.htm
    Hope this helps...
    Thanks,
    Ajith
    Edited by: Ajith Kamath on Oct 20, 2009 8:28 AM

  • Solution Manager 4.0,  Red hat Linux 4.0 ES & AS, JSF user creation error

    Dear SAP Gurus,  Please advise.
    I have problem during the installation of SAP SOL Man4.0
    Input:
    I am using <b>SOL Man 4.0</b> with Linux version 2004s version2
    1. <b>Red Hat 4.0 ES</b> , 2. <b>Red hat 4.0 AS</b> (Tried both)
    <b>Java 1.4.2_09
    java Cripto: 1.4.2</b>
    when it go the step 34 out of 44 when it create JSF user creation, I am getting error
    It could not able to create Java user.
    It stops. this error is coming during sapjsf user creation.
    is this bug in SOL man 4.0, any one able to successfully install on Linux.
    I see lot of people had probem while doing on windows, but no one tried on Linux.
    I really appriciate, if some one can help on this.
    Thanks
    Ashok .K
    [email protected]

    Dear Raguraman C ,
    Thanks for your help, here is the log i got, during installation step of <b>Phase 33 of 45 JSF user creation</b>.
    Please analyse, advise me what Java settings need to be changed.
    Thanks
    Ashok .K
    [email protected]
    INFO       2006-12-29 00:06:38
    Execute step createJSF of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind |ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0.
    INFO       2006-12-29 00:06:39 [syuxcpath.cpp:351]
               CSyPath::createFile()
    Creating file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.jlaunch.
    INFO       2006-12-29 00:06:39 [syuxcpath.cpp:351]
               CSyPath::createFile()
    Creating file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.log.
    INFO       2006-12-29 00:06:39 [syuxccuren.cpp:264]
               CSyCurrentProcessEnvironmentImpl::setGroup(PSyGroup)
    Real group id set to 501.
    INFO       2006-12-29 00:06:39 [syuxccuren.cpp:543]
               CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroup)
    Effective group id set to 501.
    INFO       2006-12-29 00:06:39 [syxxccuren.cpp:105]
               CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
    Working directory changed to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
    INFO       2006-12-29 00:06:39
               CJSlibModule::writeInfo_impl()
    Output of /usr/sap/SM1/DVEBMGS01/exe/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck / tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/O RA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install -c sysn r=01 -c ashost=machine5 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX - r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message is written to the logfile /tmp/sapi nst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.log.
    WARNING    2006-12-29 00:09:27
               CJSlibModule::writeWarning_impl()
    Execution of the command "/usr/sap/SM1/DVEBMGS01/exe/jlaunch UserCheck.jlaunch com.sap.security.t ools.UserCheck /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir /SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS /install -c sysnr=01 -c ashost=machine5 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SA PJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with retu rn code 4. Output:
    Dec 29, 2006 12:06:44... Info: User management tool (com.sap.security.tools.UserCheck) called for  action "checkCreate"
    Dec 29, 2006 12:06:44... Info: Connected to backend system SM1 client 001 as user DDIC
    Dec 29, 2006 12:06:45... Info: Called for user SAPJSF
    Dec 29, 2006 12:06:49... Info: Formal password check successful
    Dec 29, 2006 12:06:49... Info: Will create user SAPJSF
    Dec 29, 2006 12:09:20... Info: Created user SAPJSF of type A with reference user <none>
    Dec 29, 2006 12:09:22... Warning: Error during creation of user SAPJSF. Will remove user again to  ensure clean exit state
    Dec 29, 2006 12:09:27... Error: Exception during execution of the operation
    [EXCEPTION]
    com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Invalid request.
            at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
            at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1395)
            at com.sap.mw.jco.JCO$Client.execute(JCO.java:3917)
            at com.sap.mw.jco.JCO$Client.execute(JCO.java:3354)
            at com.sap.security.tools.UserCheck.createUser(UserCheck.java:1876)
            at com.sap.security.tools.UserCheck.main(UserCheck.java:289)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Dec 29, 2006 12:09:27... Info: Leaving with return code 4
    INFO       2006-12-29 00:09:27 [syuxcfile.cpp:280]
               CSyFileImpl::remove()
    Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.
    INFO       2006-12-29 00:09:27 [syuxcfile.cpp:280]
               CSyFileImpl::remove()
    Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.clone.
    ERROR      2006-12-29 00:09:27
               CJSlibModule::writeError_impl()
    CJS-30196  Invalid request.
    ERROR      2006-12-29 00:09:27
    FCO-00011  The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind |ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2 |0|createJSF was executed with status ERROR .
    Ashok kalakota My coment:
    Phase 33 of 45 JSF user creation
    INFO       2006-12-29 00:06:38
    Execute step createJSF of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind |ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0.
    INFO       2006-12-29 00:06:39 [syuxcpath.cpp:351]
               CSyPath::createFile()
    Creating file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.jlaunch.
    INFO       2006-12-29 00:06:39 [syuxcpath.cpp:351]
               CSyPath::createFile()
    Creating file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.log.
    INFO       2006-12-29 00:06:39 [syuxccuren.cpp:264]
               CSyCurrentProcessEnvironmentImpl::setGroup(PSyGroup)
    Real group id set to 501.
    INFO       2006-12-29 00:06:39 [syuxccuren.cpp:543]
               CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroup)
    Effective group id set to 501.
    INFO       2006-12-29 00:06:39 [syxxccuren.cpp:105]
               CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
    Working directory changed to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
    INFO       2006-12-29 00:06:39
               CJSlibModule::writeInfo_impl()
    Output of /usr/sap/SM1/DVEBMGS01/exe/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck / tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/O RA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install -c sysn r=01 -c ashost=machine5 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX - r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message is written to the logfile /tmp/sapi nst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.log.
    WARNING    2006-12-29 00:09:27
               CJSlibModule::writeWarning_impl()
    Execution of the command "/usr/sap/SM1/DVEBMGS01/exe/jlaunch UserCheck.jlaunch com.sap.security.t ools.UserCheck /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir /SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS /install -c sysnr=01 -c ashost=machine5 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SA PJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with retu rn code 4. Output:
    Dec 29, 2006 12:06:44... Info: User management tool (com.sap.security.tools.UserCheck) called for  action "checkCreate"
    Dec 29, 2006 12:06:44... Info: Connected to backend system SM1 client 001 as user DDIC
    Dec 29, 2006 12:06:45... Info: Called for user SAPJSF
    Dec 29, 2006 12:06:49... Info: Formal password check successful
    Dec 29, 2006 12:06:49... Info: Will create user SAPJSF
    Dec 29, 2006 12:09:20... Info: Created user SAPJSF of type A with reference user <none>
    Dec 29, 2006 12:09:22... Warning: Error during creation of user SAPJSF. Will remove user again to  ensure clean exit state
    Dec 29, 2006 12:09:27... Error: Exception during execution of the operation
    [EXCEPTION]
    com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Invalid request.
            at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
            at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1395)
            at com.sap.mw.jco.JCO$Client.execute(JCO.java:3917)
            at com.sap.mw.jco.JCO$Client.execute(JCO.java:3354)
            at com.sap.security.tools.UserCheck.createUser(UserCheck.java:1876)
            at com.sap.security.tools.UserCheck.main(UserCheck.java:289)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Dec 29, 2006 12:09:27... Info: Leaving with return code 4
    INFO       2006-12-29 00:09:27 [syuxcfile.cpp:280]
               CSyFileImpl::remove()
    Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.
    INFO       2006-12-29 00:09:27 [syuxcfile.cpp:280]
               CSyFileImpl::remove()
    Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.clone.
    ERROR      2006-12-29 00:09:27
               CJSlibModule::writeError_impl()
    CJS-30196  Invalid request.
    ERROR      2006-12-29 00:09:27
    FCO-00011  The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind |ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2 |0|createJSF was executed with status ERROR .
    [root@machine5 AS]# cat UserCheck.log
    Dec 29, 2006 12:06:44... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
    Dec 29, 2006 12:06:44... Info: Connected to backend system SM1 client 001 as user DDIC
    Dec 29, 2006 12:06:45... Info: Called for user SAPJSF
    Dec 29, 2006 12:06:49... Info: Formal password check successful
    Dec 29, 2006 12:06:49... Info: Will create user SAPJSF
    Dec 29, 2006 12:09:20... Info: Created user SAPJSF of type A with reference user <none>
    Dec 29, 2006 12:09:22... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
    Dec 29, 2006 12:09:27... Error: Exception during execution of the operation
    [EXCEPTION]
    com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Invalid request.
            at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
            at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1395)
            at com.sap.mw.jco.JCO$Client.execute(JCO.java:3917)
            at com.sap.mw.jco.JCO$Client.execute(JCO.java:3354)
            at com.sap.security.tools.UserCheck.createUser(UserCheck.java:1876)
            at com.sap.security.tools.UserCheck.main(UserCheck.java:289)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Dec 29, 2006 12:09:27... Info: Leaving with return code 4
    [root@machine5 AS]# pwd
    /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS
    [root@machine5 AS]#

  • User Creation at the time of Self Registration not via Admin (xelsysadm)

    Hello there,
    I had a question related to User Creation in OIM via Self Registration (Create Request) and via "xelsysadm" itself creating one user via the web console.
    Can I do this -
    When a user does self registration then how can I directly create a user in OIM?
    Right now: the user's request needs to be approved by xelsysadm first and then only that user can login into OIM and then only that user can be seen in OIM - I want to remove the "xelsysadm" gateway of approving the request.
    I want that user directly to be present in the OIM as soon as he/she fills out it's information in the self registration pages. How can we do this?
    Also, I want an email to be sent to the user to its email ID that he/she provided at the time of self regn containing its User ID and password in it from the xelsysadm email id. How can I do that?
    TIA for the help,
    - oidm.

    Hi oidm
    User Registration is R.O. which used for User Self Registration.
    But if you see it carefully, there's no Approve Task (not workflow) in it.
    It has three task
    1) SV
    2) PI
    3) AAD
    And if you see the request while approval it shows Awaiting Approval Data means it stuck in AAD.
    Try to modify this, I can't as I don have any extra machine with. Try to modify this. It may not allow you to update it, you'll have to change its security level in Database level.
    *Awaiting Approval Data  System Administrator [XELSYSADM] Pending*
    I hope it helps you to start R n D.

  • Need API for user creation

    Dear All,
    I need to use bulk user creation through API. Please advice which API i use to resolve this issue.
    Thanks
    Rehan

    I need to use bulk user creation through API. Please advice which API i use to resolve this issue.FND_USER_PKG.CREATEUSER
    FND_USER_PKG
    https://forums.oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    PACKAGE: APPS.FND_USER_PKG
    http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_USER_PKG&c_owner=APPS&c_type=PACKAGE
    Thanks,
    Hussein

  • Help needed, Createing Dynamic User input

    Hello,
    I am attempting to create some dynamic user input by "predicting" what the user requires in a text box.
    For example if the user enters "Smi" I have a select list pop up which gives the user all options that begin with "Smi".
    I am able to achieve the popups but the interface is quite jerky and not terribly responsive I am trying to solve this by using a thread which starts and stops when new input is received but it is still not quite right.
    The program uses a Sorted TreeSet to hold the data (I thought this would give me a quick search time) and a simple interface at this stage.
    Any help would be fantastic
    Thanks in advance :P
    import java.io.*;
    import java.awt.*;
    import javax.swing.*;
    import java.awt.event.*;
    import javax.swing.event.*;
    import java.text.*;
    import java.util.*;
       /** This program represents part of a larger user interface for allowing the
       user to select data from a file or database.
       <p>
       When the program starts up, it will read in data from a given file, and hold
       it in some type of container allowing rapid access.
       <p>
       The user may then type in the first few letters of the surname of a person,
       and this program should immediately present in a popup dialog the names which
       match.  The user will be able to click on one of the names in the popup and
       that will cause all data about that person to be displayed in the JTextArea
       at the bottom of the window.
       <p>
       This program requires the FormLayout.class, FormLayout$Placement.class, and
       FormLayout$Constraint.class files in the same directory
       (folder) or in its classpath.  These is provided separately.
    class PartMatch extends JFrame implements Runnable
                        /** Close down the program. */
       JButton quitbtn;
                        /** Field for the surname. */
       JTextField namefld;
                        /** Full details of the person(s). */
       JTextArea  results;
                        /** Popup dialog to display the names and addresses which
                        match the leading characters given in namefld. */
       Chooser matches;
                      /** Default background color for a window. */
       final static  Color            defBackground = new Color(0xD0C0C0);
                      /** Default foreground color for a window. */
       final static  Color            defForeground = new Color(0x000000);
                      /** Default background color for a field */
       final static  Color            fldBackground = new Color(0xFFFFFF);
                      /** Default background color for a button */
       final static  Color            btnBackground = new Color(0xF0E0E0);
       final static  Color            dkBackground = new Color(0xB0A0A0);
                      /** Larger font */
       final static  Font bold = new Font("Helvetica", Font.BOLD, 30);
       TreeSet members;
       String input;
       String[] found;
       public static void main(String arg[])
          UIManager.put("TextField.background",fldBackground);
          UIManager.put("TextField.foreground",defForeground);
          UIManager.put("TextField.selectionBackground",btnBackground);
          UIManager.put("TextArea.background",fldBackground);
          UIManager.put("TextArea.foreground",defForeground);
          UIManager.put("TextArea.selectionBackground",btnBackground);
          UIManager.put("Panel.background",defBackground);
          UIManager.put("Label.background",defBackground);
          UIManager.put("Label.foreground",defForeground);
          UIManager.put("Button.background",btnBackground);
          UIManager.put("Button.foreground",defForeground);
          UIManager.put("CheckBox.background",defBackground);
          UIManager.put("ScrollBar.background",defBackground);
          UIManager.put("ScrollBar.thumb",btnBackground);
          UIManager.put("ComboBox.background",btnBackground);
          UIManager.put("ComboBox.selectionBackground",dkBackground);
          PartMatch trial = new PartMatch(arg);
       public PartMatch( String [] arg )
          super("Part Match");
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          Container cpane = getContentPane();
          FormLayout form = new FormLayout(cpane);
          JLabel lab1 = new JLabel("Fetch details") ;
          lab1.setFont( bold );
          form.setTopAnchor( lab1, 4 );
          form.setLeftAnchor( lab1, 4 );
          JLabel lab2 = new JLabel("Surname: ") ;
          form.setTopRelative( lab2, lab1, 4 );
          form.setLeftAlign( lab2, lab1 );
          namefld = new JTextField( 30 );
          form.setBottomAlign( namefld, lab2 );
          form.setLeftRelative( namefld, lab2, 4 );
          namefld.addCaretListener( new CaretListener()
             public void caretUpdate(CaretEvent e)
                 showMatches();
          quitbtn = new JButton( "Quit" );
          quitbtn.addActionListener( new ActionListener()
             public void actionPerformed(ActionEvent e)
                quitProcessing();
          form.setBottomAlign( quitbtn, namefld );
          form.setLeftRelative( quitbtn, namefld, 15 );
          results = new JTextArea( 10,50 );
          results.setEditable(false);
          JScrollPane jsp = new JScrollPane( results,
                                     JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,
                                     JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED );
          form.setTopRelative( jsp, lab2, 6 );
          form.setLeftAlign( jsp, lab2 );
          form.setBottomAnchor( jsp, 5 );
          form.setRightAnchor( jsp, 5 );
          form.setRightAnchor( quitbtn, 5 );
          matches = new Chooser( this );
          //matches.setUndecorated(true);
          pack();
          setVisible(true);
          namefld.requestFocus();
          if (arg.length > 0) init(arg[0]);
          else init("triathlon.txt"); //<<<<<<<<<<<<<<<< Place the default filename here
          /** Called once only, at the end of the constructor, to read the data
            * from the membership file.
       public void init( String fname )
          members = new TreeSet();
           try {
               FileReader fr = new FileReader(new File (fname));
               Scanner scan = new Scanner(fr);
               trimember cmem;
               String cLine, eTag, memberNo, first, last, gender, yob, tel ,addr,
                       club;
               while(scan.hasNextLine())
                   cLine = scan.nextLine();
                   Scanner scan2 = new Scanner(cLine);
                   scan2.useDelimiter(";");
                   eTag = scan2.next().trim();
                   memberNo = scan2.next().trim();
                   first = scan2.next().trim();
                   last = scan2.next().trim();
                   gender = scan2.next().trim();
                   yob = scan2.next().trim();
                   tel = scan2.next().trim();
                   addr = scan2.next().trim();
                   club = scan2.next().trim();
                   cmem = new trimember(eTag, memberNo, first, last, gender, yob,
                           tel, addr, club);
                   members.add(cmem);
           catch (FileNotFoundException ex)
               results.append("Sorry can't find the input file\n");
               results.append("Please check file name and location and try again");
               ex.printStackTrace();
          /** Called every time there is a change in the contents of the text field
            * namefld.  It will first clear the text area.  It then needs to search
            * through the container of data to find all records where the surname
            * starts with the characters that have been typed.  The names and
            * addresses need to be set up as strings and placed in
            * an array of Strings.  This can be placed in the "matches" window and
            * displayed for the user, inviting one to be selected.
            * <p>
            * The performance of this is very important.  If necessary, it may be
            * necessary to run as a separate thread so that the user interface is
            * not delayed.  It is essential that the user be able to type letters at a
            * reasonable speed and not have the keystroke processing held up by
            * previous text.
       public void showMatches( )
           run();
                // First clear the text area
          //results.setText("");
                // Determine the leading characters of the surname that is wanted
                input = namefld.getText();
                // Locate the data for this name, and display each matching item
                //  in the JTextArea ...
                // Example of how to set the data in the popup dialog
          matches.list.setListData(found);
          matches.pack();   // resize the popup
                // set the location of the popup if it is not currently visible
          if ( ! matches.isVisible())
             Dimension sz = matches.getSize();
             Point mouse = getMousePosition();
             Point framepos = getLocation();
             int x=0, y=0;
             if (mouse == null)
                Point pt = results.getLocation();
                x = pt.x + 20 + framepos.x;
                y = pt.y + 20 + framepos.y;
             else
                x = mouse.x - 2 + framepos.x;
                y = mouse.y - 2 + framepos.y;
             matches.setLocation(x,y);
          matches.setVisible(true);
          namefld.requestFocus();
          /** Perform any final processing before closing down.
       public void quitProcessing( )
          // Any closing work.  Then
          System.exit(0);
        public void run()
            ArrayList<String> foundit = new ArrayList<String>();
            System.out.println(input);
            if(input != null)
            Iterator it = members.iterator();
            while(it.hasNext())
               trimember test = (trimember) it.next();
               if (test.last.startsWith(input))
                   foundit.add(test.last +", "+ test.first);
            found = new String[foundit.size()];
            for(int i=0; i<foundit.size();i++)
                found[i] = foundit.get(i);
         /** A window for displaying names and addresses from the data set which
          match the leading characters in namefld.
          <p>
          This will automatically pop down if the user moves the mouse out of the
          window.
          <p>
          It needs code added to it to respond to the user clicking on an item in
          the displayed list. */
       class Chooser extends JWindow
                /** To display a set of names and addresses that match the leading
                characters of the namefld text field. */
          public JList list = new JList();
          Chooser( JFrame parent )
             super( parent );
             Container cpane = getContentPane();
             cpane.addMouseListener( new MouseAdapter()
                public void mouseExited(MouseEvent e)
                   Chooser.this.setVisible(false);
             cpane.add("Center",list);
             list.addListSelectionListener( new ListSelectionListener()
                public void valueChanged(ListSelectionEvent e)
                   Chooser.this.setVisible(false);
                   System.out.println("ValueChanged");
                   // First clear the text area
                   results.setText("");
                   String in = (String) list.getSelectedValue();
                   System.out.println("Selected Value was : "+in);
                   String[] inlf = in.split(", ");
                   System.out.println("inlf[0]:"+inlf[0]+" inlf[1]:"+inlf[1]);
                   results.append("Surname \tFirst \teTag \tMemberNo \tSex \tYOB " +
                           "\tTel \tAddress \t\t\tClub\n");
                   Iterator it = members.iterator();
                   while(it.hasNext())
                       trimember test = (trimember) it.next();
                       if (test.last.equals(inlf[0])&&test.first.equals(inlf[1]))
                           results.append(test.toString()+"\n");
                   namefld.requestFocus();
          public class trimember implements Comparable
           String eTag;
           public String memberNo;
           public String first;
           public String last;
           String gender;
           String yob;
           String tel;
           String addr;
           String club;
           public trimember(String eT, String me, String fi, String la,
                   String ge, String yo, String te, String ad, String cl)
               eTag = eT;
               memberNo = me;
               first = fi;
               last = la;
               gender = ge;
               yob = yo;
               tel = te;
               addr = ad;
               club = cl;         
           //To String method to output string of details
           public String toString()
               return last + "\t" + first + "\t" + eTag + "\t" +
                       memberNo + "\t" + gender + "\t" + yob + "\t"+ tel + "\t" +
                       addr + "\t" + club;
           //Compare and sort on Last name
           public int compareTo(Object o)
               trimember com = (trimember) o;
               int lastCmp = last.compareTo(com.last);
               int firstCmp = first.compareTo(com.first);
               int memCmp = memberNo.compareTo(com.memberNo);
               if (lastCmp == 0 && firstCmp !=0)return firstCmp;
               else if (lastCmp==0&&firstCmp==0)return memCmp;
               else return lastCmp;
    }

    Please don't cross-post. It is considered very rude to do that here:
    http://forum.java.sun.com/thread.jspa?messageID=9953193

  • Help needed, Providing Dynamic User input

    Hello,
    I am attempting to create some dynamic user input by "predicting" what the user requires in a text box.
    For example if the user enters "Smi" I have a select list pop up which gives the user all options that begin with "Smi".
    I am able to achieve the popups but the interface is quite jerky and not terribly responsive I am trying to solve this by using a thread which starts and stops when new input is received but it is still not quite right.
    The program uses a Sorted TreeSet to hold the data (I thought this would give me a quick search time) and a simple interface at this stage.
    Any help would be fantastic
    Thanks in advance :P
    import java.io.*;
    import java.awt.*;
    import javax.swing.*;
    import java.awt.event.*;
    import javax.swing.event.*;
    import java.text.*;
    import java.util.*;
       /** This program represents part of a larger user interface for allowing the
       user to select data from a file or database.
       <p>
       When the program starts up, it will read in data from a given file, and hold
       it in some type of container allowing rapid access.
       <p>
       The user may then type in the first few letters of the surname of a person,
       and this program should immediately present in a popup dialog the names which
       match.  The user will be able to click on one of the names in the popup and
       that will cause all data about that person to be displayed in the JTextArea
       at the bottom of the window.
       <p>
       This program requires the FormLayout.class, FormLayout$Placement.class, and
       FormLayout$Constraint.class files in the same directory
       (folder) or in its classpath.  These is provided separately.
    class PartMatch extends JFrame implements Runnable
                        /** Close down the program. */
       JButton quitbtn;
                        /** Field for the surname. */
       JTextField namefld;
                        /** Full details of the person(s). */
       JTextArea  results;
                        /** Popup dialog to display the names and addresses which
                        match the leading characters given in namefld. */
       Chooser matches;
                      /** Default background color for a window. */
       final static  Color            defBackground = new Color(0xD0C0C0);
                      /** Default foreground color for a window. */
       final static  Color            defForeground = new Color(0x000000);
                      /** Default background color for a field */
       final static  Color            fldBackground = new Color(0xFFFFFF);
                      /** Default background color for a button */
       final static  Color            btnBackground = new Color(0xF0E0E0);
       final static  Color            dkBackground = new Color(0xB0A0A0);
                      /** Larger font */
       final static  Font bold = new Font("Helvetica", Font.BOLD, 30);
       TreeSet members;
       String input;
       String[] found;
       public static void main(String arg[])
          UIManager.put("TextField.background",fldBackground);
          UIManager.put("TextField.foreground",defForeground);
          UIManager.put("TextField.selectionBackground",btnBackground);
          UIManager.put("TextArea.background",fldBackground);
          UIManager.put("TextArea.foreground",defForeground);
          UIManager.put("TextArea.selectionBackground",btnBackground);
          UIManager.put("Panel.background",defBackground);
          UIManager.put("Label.background",defBackground);
          UIManager.put("Label.foreground",defForeground);
          UIManager.put("Button.background",btnBackground);
          UIManager.put("Button.foreground",defForeground);
          UIManager.put("CheckBox.background",defBackground);
          UIManager.put("ScrollBar.background",defBackground);
          UIManager.put("ScrollBar.thumb",btnBackground);
          UIManager.put("ComboBox.background",btnBackground);
          UIManager.put("ComboBox.selectionBackground",dkBackground);
          PartMatch trial = new PartMatch(arg);
       public PartMatch( String [] arg )
          super("Part Match");
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          Container cpane = getContentPane();
          FormLayout form = new FormLayout(cpane);
          JLabel lab1 = new JLabel("Fetch details") ;
          lab1.setFont( bold );
          form.setTopAnchor( lab1, 4 );
          form.setLeftAnchor( lab1, 4 );
          JLabel lab2 = new JLabel("Surname: ") ;
          form.setTopRelative( lab2, lab1, 4 );
          form.setLeftAlign( lab2, lab1 );
          namefld = new JTextField( 30 );
          form.setBottomAlign( namefld, lab2 );
          form.setLeftRelative( namefld, lab2, 4 );
          namefld.addCaretListener( new CaretListener()
             public void caretUpdate(CaretEvent e)
                 showMatches();
          quitbtn = new JButton( "Quit" );
          quitbtn.addActionListener( new ActionListener()
             public void actionPerformed(ActionEvent e)
                quitProcessing();
          form.setBottomAlign( quitbtn, namefld );
          form.setLeftRelative( quitbtn, namefld, 15 );
          results = new JTextArea( 10,50 );
          results.setEditable(false);
          JScrollPane jsp = new JScrollPane( results,
                                     JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,
                                     JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED );
          form.setTopRelative( jsp, lab2, 6 );
          form.setLeftAlign( jsp, lab2 );
          form.setBottomAnchor( jsp, 5 );
          form.setRightAnchor( jsp, 5 );
          form.setRightAnchor( quitbtn, 5 );
          matches = new Chooser( this );
          //matches.setUndecorated(true);
          pack();
          setVisible(true);
          namefld.requestFocus();
          if (arg.length > 0) init(arg[0]);
          else init("triathlon.txt"); //<<<<<<<<<<<<<<<< Place the default filename here
          /** Called once only, at the end of the constructor, to read the data
            * from the membership file.
       public void init( String fname )
          members = new TreeSet();
           try {
               FileReader fr = new FileReader(new File (fname));
               Scanner scan = new Scanner(fr);
               trimember cmem;
               String cLine, eTag, memberNo, first, last, gender, yob, tel ,addr,
                       club;
               while(scan.hasNextLine())
                   cLine = scan.nextLine();
                   Scanner scan2 = new Scanner(cLine);
                   scan2.useDelimiter(";");
                   eTag = scan2.next().trim();
                   memberNo = scan2.next().trim();
                   first = scan2.next().trim();
                   last = scan2.next().trim();
                   gender = scan2.next().trim();
                   yob = scan2.next().trim();
                   tel = scan2.next().trim();
                   addr = scan2.next().trim();
                   club = scan2.next().trim();
                   cmem = new trimember(eTag, memberNo, first, last, gender, yob,
                           tel, addr, club);
                   members.add(cmem);
           catch (FileNotFoundException ex)
               results.append("Sorry can't find the input file\n");
               results.append("Please check file name and location and try again");
               ex.printStackTrace();
          /** Called every time there is a change in the contents of the text field
            * namefld.  It will first clear the text area.  It then needs to search
            * through the container of data to find all records where the surname
            * starts with the characters that have been typed.  The names and
            * addresses need to be set up as strings and placed in
            * an array of Strings.  This can be placed in the "matches" window and
            * displayed for the user, inviting one to be selected.
            * <p>
            * The performance of this is very important.  If necessary, it may be
            * necessary to run as a separate thread so that the user interface is
            * not delayed.  It is essential that the user be able to type letters at a
            * reasonable speed and not have the keystroke processing held up by
            * previous text.
       public void showMatches( )
           run();
                // First clear the text area
          //results.setText("");
                // Determine the leading characters of the surname that is wanted
                input = namefld.getText();
                // Locate the data for this name, and display each matching item
                //  in the JTextArea ...
                // Example of how to set the data in the popup dialog
          matches.list.setListData(found);
          matches.pack();   // resize the popup
                // set the location of the popup if it is not currently visible
          if ( ! matches.isVisible())
             Dimension sz = matches.getSize();
             Point mouse = getMousePosition();
             Point framepos = getLocation();
             int x=0, y=0;
             if (mouse == null)
                Point pt = results.getLocation();
                x = pt.x + 20 + framepos.x;
                y = pt.y + 20 + framepos.y;
             else
                x = mouse.x - 2 + framepos.x;
                y = mouse.y - 2 + framepos.y;
             matches.setLocation(x,y);
          matches.setVisible(true);
          namefld.requestFocus();
          /** Perform any final processing before closing down.
       public void quitProcessing( )
          // Any closing work.  Then
          System.exit(0);
        public void run()
            ArrayList<String> foundit = new ArrayList<String>();
            System.out.println(input);
            if(input != null)
            Iterator it = members.iterator();
            while(it.hasNext())
               trimember test = (trimember) it.next();
               if (test.last.startsWith(input))
                   foundit.add(test.last +", "+ test.first);
            found = new String[foundit.size()];
            for(int i=0; i<foundit.size();i++)
                found[i] = foundit.get(i);
         /** A window for displaying names and addresses from the data set which
          match the leading characters in namefld.
          <p>
          This will automatically pop down if the user moves the mouse out of the
          window.
          <p>
          It needs code added to it to respond to the user clicking on an item in
          the displayed list. */
       class Chooser extends JWindow
                /** To display a set of names and addresses that match the leading
                characters of the namefld text field. */
          public JList list = new JList();
          Chooser( JFrame parent )
             super( parent );
             Container cpane = getContentPane();
             cpane.addMouseListener( new MouseAdapter()
                public void mouseExited(MouseEvent e)
                   Chooser.this.setVisible(false);
             cpane.add("Center",list);
             list.addListSelectionListener( new ListSelectionListener()
                public void valueChanged(ListSelectionEvent e)
                   Chooser.this.setVisible(false);
                   System.out.println("ValueChanged");
                   // First clear the text area
                   results.setText("");
                   String in = (String) list.getSelectedValue();
                   System.out.println("Selected Value was : "+in);
                   String[] inlf = in.split(", ");
                   System.out.println("inlf[0]:"+inlf[0]+" inlf[1]:"+inlf[1]);
                   results.append("Surname \tFirst \teTag \tMemberNo \tSex \tYOB " +
                           "\tTel \tAddress \t\t\tClub\n");
                   Iterator it = members.iterator();
                   while(it.hasNext())
                       trimember test = (trimember) it.next();
                       if (test.last.equals(inlf[0])&&test.first.equals(inlf[1]))
                           results.append(test.toString()+"\n");
                   namefld.requestFocus();
          public class trimember implements Comparable
           String eTag;
           public String memberNo;
           public String first;
           public String last;
           String gender;
           String yob;
           String tel;
           String addr;
           String club;
           public trimember(String eT, String me, String fi, String la,
                   String ge, String yo, String te, String ad, String cl)
               eTag = eT;
               memberNo = me;
               first = fi;
               last = la;
               gender = ge;
               yob = yo;
               tel = te;
               addr = ad;
               club = cl;         
           //To String method to output string of details
           public String toString()
               return last + "\t" + first + "\t" + eTag + "\t" +
                       memberNo + "\t" + gender + "\t" + yob + "\t"+ tel + "\t" +
                       addr + "\t" + club;
           //Compare and sort on Last name
           public int compareTo(Object o)
               trimember com = (trimember) o;
               int lastCmp = last.compareTo(com.last);
               int firstCmp = first.compareTo(com.first);
               int memCmp = memberNo.compareTo(com.memberNo);
               if (lastCmp == 0 && firstCmp !=0)return firstCmp;
               else if (lastCmp==0&&firstCmp==0)return memCmp;
               else return lastCmp;
    }Edited by: Roger on Nov 3, 2007 11:50 AM

    Please don't cross-post. It is considered very rude to do that here:
    http://forum.java.sun.com/thread.jspa?threadID=5233033&messageID=9953169#9953169

  • Dynamic user in RFC Adapter

    I configure a RFC Receiver adapter to communicate with R/3. In my client application  (via Webdynpro) I send the message that use this communication, but I need to call the RFC using a dynamic user/password, that is, the user credentials that is logged. Is it possible? How I do it?
    thanks.

    Hi Elton,
    I don't think so, it is possible to have dynamic user ID and password for the RFC adapter. As of now...
    Because you need to enter the user id and password while configuring adapter itself.
    But if you want , you can call different RFCs based on the Condition etc.
    Hope this helps,
    Regards,
    Moorthy

  • Dynamic user interfaces

    Hello,
    here's a little teaser for user interface experts out there:
    I wonder what kind of techniques ABAP offers for creating dynamic user interfaces.
    When talking of 'dynamic' I imagine something like an arbitrary number of 'containers' where other programs (classes f.ex.) can draw their own user interface into.
    In Java this could be realized with the container concept in swing.
    I have done some research on this topic and the results are so far:
    a plain dynpro: seems to have no dynamic at all -> not an option
    a plain dynpro with a tabstrip: in case the number of tabs CAN be set at runtime AND the subscreens CAN be drawn from inside separate classes -> a definite option otherwise not an option
    any kind of web-frontend (BSP, JSP etc.): web-frontends are not allowed by company restrictions -> not an option
    dynamic documents: I could not find many information on these yet (also not on sdn). In case that an arbitrary number of parts of the dynamic document can be created from inside separate classes -> an option otherwise not an option
    I will be happy about any further information on this topic.
    Best regards,
    Patrick Baer

    I spent some time today doing research on BSP's and built a "BSP-Viewer" embedded into the SAP-GUI. Though I like the concept of BSP's a lot (like I did already with JSP's) but company restricitions are too strict. So BSP's are out of the play.
    After the discussion I started to play around with the different containers and basically I'm quite pleased with them and the "cl_gui_container_bar" allows an arbirtary number of "subscreens" which matches my requirements.
    But as usual there's still a downside:
    I found no option to built text labels and text fields into a container. Unless this is possible I can't give this approach a chance. I already found some postings which seemed to confirm that this is in fact not possible but I can't really believe it. At least from what it looks like it seems to me that the object navigator utilizes both: splitters, containers and all the stuff AS WELL AS the "classical" elements like text boxes, labels and so on.
    Any ideas on how to combine the container concept with text fields, labels maybe whole dynpros or subscreens ?
    Best regards,
    Patrick Baer

  • Can we Automate User Creation in SAP IDES?

    Hey Guys,
    I found this piece of information on Internet somewhere.
    "SAP provides a simple user creation mechanism for IDES system. An enhancement is already active by the name USRADMIN this contains code that executes just after the user logon. If somebody logs on as 'MUSTER' with password 'IDES' it prompts to create a user. and after the creation MUSTER is logged off. If the password of MUSTER is changed the program also reset the password to IDES always. the password is hard coded in the code
    For this to be active an entry has to be maintained in the table zides_user_procc . In this table we maintain the SAP system SID, client where this functionality is to be active and also maintain the reference user which will be copied to the new user ."
    *bol

    It was a while back, but the logic was like this:
    User logs into webpage on intranet.  Lets just say that authentication to that resource is dealt with separately here.
    User is presented with a form and fills in info like
    UserID required
    FirstName
    LastName
    email address
    Password
    This info is used by some backend VB code which initialises an RFC connection with SAP.
    Once RFC is established, a function module to copy an existing template user is executed (template user contains roles to copy etc).  The new user is created as required and you can then log on & use it.
    To be honest, most self service sandbox systems tend to be the log in using existing user & create yourself a user or run a prog which will do it for you.
    Hope that helps,
    Cheers
    Alex

Maybe you are looking for