DYNPRO_SEND_IN_BACKGROUND Dump due to Update Control Screen

Hi All,
I have a smartform which is being attached to a SO while creating from Idoc. Due to this smartform processing in update task, it is giving a update control screen and it is giving dump DYNPRO_SEND_IN_BACKGROUND.
My question: how to suppress this "Update Control" screen ? is there anything can be controlled from user status profile ?
Thanks,

What is the type of user?
Can you try with Dialog user or System user?

Similar Messages

I replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks

i replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks

Hi Eric,
What message do you get when you try to connect?
Cheers!

DYNPRO_SEND_IN_BACKGROUND dumps in Update debugging

Hi Experts,
I am getting DYNPRO_SEND_IN_BACKGROUND dumps when I apply update debugging for SAPMV45A (VA01). It should open another session in debug mode, instead it is getting a dumps. I got lot of notes on the dumps, but nothing is useful.
A little Info:
Information on where terminated
The termination occurred in the ABAP program "SAPLV45U" in
"RV_SALES_DOCUMENT_ADD".
The main program was "RSM13000 ".
The termination occurred in line 5 of the source code of the (Include)
program "LV45UV02"
of the source code of program "LV45UV02" (when calling the editor 50).
The program "SAPLV45U" was started in the update system.
Program "RSM13000" is used for opening session in Update debugging and for handline the task.
In this case commit work is not happening and update records are locked.
Thanks in advance.
--Sri.

hi
good
go through this bolg, i hope this ll help you to splve your problem.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/24%3fx-o%3d100
thanks
mrutyun^

Update control of movement type is incorrect

while planning for a material with mrp type pd and strategy group as 20(make to order) i created a customer requirement against which after running mrp the tran md04 showed purchase req for a particular material which was released by me and converted into purchase order by me.
but when I wanted to do goods receipt against the po generated it is giving me this error in tranc migo.
ERROR IS "update control of movement type is incorrect entry (101 X X e b _ v)
the performance assist screen shows this
Update control of movement type is incorrect (entry 101 X X E B _ V)
Message no. M7226
Diagnosis
The system could not find entry 101 X X E B _ V in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

Hi
Check the T code OMJJ for the defining the MVt type also check the error is coming for MVT type 101 then check with mvt type 101 in t code OMJJ and check the updation control there.
also consult your MM consultant for this error
Regards
Anupam Sharma

How to update the screen in realtime?

Hey,
i am realy new in Indesign scripting
i want to do a simple client script… the script should receive data and write it to a textbox (or do sth else with it).
Everything works fine the only problem is: I dont know how to make this in realtime… for example every 10 seconds data comes from the server and should be directly displayed in the Indesign file.
I need sothing like update the screen or flush the display…
Thank you!
All the best
Code:
myFrame = app.activeDocument.textFrames.add ();
myFrame.geometricBounds = [30,30,200,200];
reply = "";
conn = new Socket;
while(conn.open("localhost:12345")) {
reply = conn.readln()
$.write(reply)
myFrame.contents = reply;
//update the frame…

Hey thank you, it works but it is too slow,
i try something like a remote control for indesign i am sending values to indesign to - for example- move a frame... rotate etc..
this works more or less:
myFrame = app.activeDocument.textFrames.add ();
myFrame.geometricBounds = [30,30,200,200];
for(;;)
for(var i=0; i<100; i++){
$.sleep(220)
myFrame.move ([i, 16])
myFrame.contents = " "+i
myFrame.recompose()
but this is too slow, what can i do? i can see all incoming values printed to the console but there is no fluent movement. but i realy need this, any ideas?
myFrame = app.activeDocument.textFrames.add ();
myFrame.geometricBounds = [30,30,200,200];
reply = "";
conn = new Socket;
while(conn.open("localhost:12345")) {
reply = conn.readln()
$.write(reply+".")
myFrame.move ([reply, 50])
myFrame.contents = reply
myFrame.recompose()
thank you !!

Controlling Screen Resolution in BDCs

Hi,
Can any one explain about the process for Controlling Screen Resolution in BDCs.
Thanks & Regards,
Rajesh.

Hi,
If u write table control bdc program in 14'' monitor screen, then if the same program u run at different monitor size, then the screen resolution problem comes in to the picture,
like, u get 5 records in table control in one screen, and some other records in other screen, to avoid this screen resolution problem we use CTU-PARAMS Structure.
In ur program u have to set
defsize type ctu_params-defsize value 'X',
Then u will be free of screen resolution problem.
Fill the str CTU_PARAMS-defsize = 'X' and pass in CTU stmnt as
call transaction 'XXX' options using t_bdcdata ctu_params.
Analysing :
1. If nothing works, then we have to
some ifs & buts.
2. There shall be normally
2-4 different kinds of resolution
on various users comptuers.
3. Based on this,
we have to know beforehand,
what will be the number of rows
in the table control.
4. The user can be given
a selection/paraemter
for resolution
eg. 800x600
1024x100
axb
etc.
5. Based on this, we will hardcode
in the program (based upon our knowledge/recording
which we have seen and done)
we will hardcode
the number of lines
in the VARIBLE.
6. Then we can simply use this variable
for our LOOP and logic purpose.
7. It will be the responsibiltiy of the
use to CHOOSE THE CORRECT resolution,
on the selection-screen.
For screen resolution use ctu_params, with default size
Data : f_option type ctu_params,
f_option-updmode = 'S'.
f_option-defsize = 'X'.
f_option-dismode = 'N'.
call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
CALL TRANSACTION tcode... OPTIONS FROM opt
... OPTIONS FROM opt
Effect
Allows you to control processing using the values of the componetns of the structure opt, which must have the ABAP Dictionary type CTU_PARAMS. The components have the following meanings:
DISMODE
Display mode (like the MODE addition)
UPDMODE
Update mode (like the UPDATE addition)
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE
Use default window size
RACOMMIT
Do not end transaction at COMMIT WORK
NOBINPT
No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND
No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
' ' No
If you do not use the OPTIONS FROM addition, the following control parameter settings apply:
DISMODE
From addition MODE
UPDMODE
From addition UPDATE
CATTMODE
No CATT active
DEFSIZE
Do not use default window size
RACOMMIT
Successful end on COMMIT WORK
NOBINPT
Batch input mode active ( SY-BINPT = X
NOBIEND
Batch input mode remains active after the BDC data
Hope it makes u understand...
Reagrds,

HT2292 I am do update follow screen but when it appear error everything gone and my iPhone stuck not working any more.

Yes I do update as screen shot pop up but I meet trouble now.
Please help me my phone IME 013418007959678.

Sorry, but as you already wrote, you should have never done this, and Apple will not service the phone anymore after you have opened the phone.
Your only chance would be finding a 3rd party repair service that can fix that for you. And we can't help you either, due to the Terms of Use in these discussions.
Good Luck anyway.

Update Control message while processing VL10*

When processing VL10A or VL10B in 'Background' a random 'Update Control' message will break on the screen. Pressing F3 will Esc this 'break' and continue with the process. I am unable to determine why this error is breaking on the screen and which orders are not getting deliveries created. Has anyone come across this before? and how did you resolve/fix the error? I am unable to find a OSS Note on this.
Thank you Janelle

Does this message has a class and a number (e.g. V2 100)? If so, you could set up a watchpoint in debugger for it and see where it appears...

671 - movement type - Error update control

Hi,
I have created ew movement type Z71 with reference to 671 movement type for return sto delivery.
We have removed the movement type category 01 from Z71 mvt type, due to this we are not able to do the PGR for return sto deliveries.
While doing PRG system showing error: Update control of movement type is incorrect (entry Z71 X X _ L ).
We have removed that mot.type category for the purpose of updating the RG23D register in Depot, it has been suggested by SAP only. But i don't know the link b/w update control and movement type category.
Please let me know if these is any config for movement type control related.
Thanks&Regards
Lakshmikanth

Hi All,
This is a bug in SAP
SAP has replied with Pilot note. They have given one pilot note to us.
We are going to implimenting in J1IG program for updating the RG23D register with reference to negative post goods issue(material document which is having 671 movement type).
The Pilot note number is 1300928. You can find more details in this note.
We will get back tou you after testing this note.
Regards
Lakshmikanth

HT1430 dueing the update ios7 7.0.2 ipad can not open. They show the message is correct the itunes. I back the house and correct the itunes and get the recover the ipad but unsucessful. now the ipad is unavaible to start. pls help

dueing the update IOS 7 7.0.2, ipad show the message is contact the itunes, when I back the house, ipad contact the PC and itunes for recovery the ipad but unsuccessful. Now ipad is not start.please help

I hope this helps. If I understood your question properly, it is the same or similar problem many, including myself, had with the IOS7 update. I'll relay my situation & what I did to rectify it. I have the iPad2 & MACBook Pro. I have an iPhone 5 but won't be updating it.
IF YOU HAVEN'T YET UPDATED YOUR iPAD TO IOS 7... DON'T. NOT UNTIL YOU'RE CERTAIN YOU HAVE BACKED UP YOUR iPAD, AT LEAST. BE ABSOLUTELY CERTAIN YOU HAVE BACKED UP YOUR DEVICE.
FIRST: BACK UP YOUR IPAD, & ALL YOUR DEVICES.
NEXT: CHECK FOR UPDATES ON ALL DEVICES.
I updated my iPad while away from my main wifi connection because using my main wifi for the last update subsequently interfered with my connection thereafter. New problem now.
1.) Once I updated (was it successful/unsuccessful?) Because...
My iPad showed a large apple with a line underneath; then it illustrated & said, "connect to iTunes." i can't accessa thing. (Huh? Doesn't Apple know people TRAVEL FAR away from their MAC with their iPads? I WAS RUDELY LEFT WITH AN INOP DEVICE on the road.)
2.) On my MAC: I checked for all updates, & ensured my iTunes was updated.
3.) I followed thre following instructions from a website (http://www.digitaltrends.com/mobile/ios-7-problems/) I found when researching this common problem. iPhone... iPad... same instructions...
...connect to iTunes and try DFU (Device Firmware Upgrade) mode.
Potential solution:
Hold down the Sleep/Wake button to turn your iPhone off.
Open iTunes on your computer and connect your iPhone.
Hold down the Sleep/Wake button and the Home button together for ten seconds, and then release the Sleep/Wake button.
Continue to hold down the Home button until you see a pop-up on iTunes stating that “iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.”
Your iPhone screen should be blank, if you see a logo or message on it then you are not in DFU (Device Firmware Upgrade) mode.
Select your iPhone in the left hand column of iTunes and select Summary then Restore.
You may need to install the iOS 7 update again.
------------------ THIS WORKED.
I followed the instruction & so far so good. DO NOT DISCONNECT YOUR iPAD! It will continue to prompt you through SEVERAL items, including the re-installation of one of your previous back-ups. It appears the back-up was successful & that everything is now back to normal.
Except that now I'm stuck with the juvenile appearance of this new IOS. My Notepad no longer looks like a notepad. Why don't I just type on DOS? My APPLE easthetice have disappeared. If I can, I will revert to IOS 6.
Read more: http://www.digitaltrends.com/mobile/ios-7-problems/#ixzz2g7Y2neAU
Follow us: @digitaltrends on Twitter | digitaltrendsftw on Facebook

Update Control Report

Hi All,
Can any one let me know what is the use of "Update Control Report" in Administration-->Utilities-->Update Control Report how can i use this option.

Hi Sandy,
During regular work in SAP Business One, you enter, process, and update data. In specific scenarios, this data can be corrupted or disrupted due to certain user actions or global malfunctions. You can resolve some of these cases by using the restore functions.
Now the Update Control report is used to view database information after restoring the application and the database.
Nagesh

VL10* Update Control message breaks

When processing VL10A or VL10B in 'Background' a random 'Update Control' message will break on the screen. Pressing F3 will Esc this 'break' and continue with the process. I am unable to determine why this error is breaking on the screen and which orders are not getting deliveries created. Has anyone come across this before? and how did you resolve/fix the error? I am unable to find a OSS Note on this.
Thank you Janelle

Does this message has a class and a number (e.g. V2 100)? If so, you could set up a watchpoint in debugger for it and see where it appears...

Due to my laptop screen failing i have to return to facory settings, can i reinstall adobe reader and adobe air afterwards?

Due to my laptop screen failing I have to return it to factory settings, can I reinstall adobe reader and air afterwards?

I don't see why not. Do you foresee a special difficulty?

What a horrible way to treat customers. I was due for updates on my phones and thought I should maybe check some other prices but have been with Verizon for 20 yrs so ended up there. I got 2 new IPhones 5s and the wife couldn't decide what she wanted so s

What a horrible way to treat customers. I was due for updates on my phones and thought I should maybe check some other prices but have been with Verizon for 20 yrs so ended up there. I got 2 new IPhones 5s and the wife couldn’t decide what she wanted so she stayed with old phone but this locked me into a new 2 yr contract . Within a wk one of the new iPhones started turning on and of like 10 –15 times a day. Wk 2 it turned off and would not turn on again . It was my sons who was in college at the time so we talked and he took it in to a Verizon store where he was told I need to come in since the account was in my name. He was away from home , Verizon could see on account it was his phone they said it was not abused, they could not even turn it on , they sold me the phone give him another phone maybe even a loaner till he gets another. So now I need to go to store and explain to 3 different people this is my phone and my son has it and I need a new one. what a waste of time after about 2 hrs and talking to different people and yes they said there were notes on his account from other person he had talked to from different store. So I finally walk out with a receipt in hand and being told I would have a new phone in a couple days. As I sat in my vehicle thinking this is stupid I looked at my receipt and noticed it said droid on it so back into Verizon I went. The salesman said that’s what your son has on his account. My son had activated a friends old phone so he has one since VERIZON REFUSED to give him one. Another hr 3 people and yes they can see he had a new iPhone and notes on it from other store. Sometimes sorry just doesn't do it. I was now late for a appointment . Now I walk out and have been told I will get a new iPhone in the mail in about 2 wk Yes 2 wks again I bought it there just give me a new one and you send old one back. I will also get a new droid that I have to send back because they said they cant cancel it . In about 3 days I get the Droid and sent it back Verizon mistake and a waste of my time . After waiting over 2 wks and not receiving a new iPhone back to Verizon I went . I am now bitter at Verizon after doing 20 yrs of business with them. 3 people 1 hr later I was told it got delivered to my post office . I got the tracking num called the post office and they say o yes that was the droid. Go back in to Verizon another hr of explaining I walk out being told I will get a new iPhone in a couple of days, We’ll see . Once again I got the phone in your store just give me a new one . Do you realize how much of my time you have wasted ? do you care? O what is Your Policy ? How many Billion did you make last year ? I am Locked into a new 2 yr contract . Why don’t you just release me ? After 20 yrs do you think I will ever renew my contract ?

Simple process. If an iPhone go to the Apple Store and not Verizon
the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
good luck

With the new update my screen is not wide enough for the format. How do I change this?

After the new update, the screen shows only 3/4 of what is presented. I have reduced the size of the print and that did not help. For instance, in typing this, once I got as far as "presented" the screen had to shift to the left to allow me to see what I was typing. It did this automatically. I don't know what caused this in the latest edition of the update, but it has caused me a number of problems in doing on line banking because unmovable windows do not show enough to allow me to hit the submit button.
I want to see the entire window when I log onto a site. When I now open Yahoo News for instance, I cannot see the last three inches. I can see them if I move the page over, but up until now, I have always seen the entire page when it comes up without having to take any action on my part.
Where do I go or what do I do to get it back to how it always functioned before?
I opened the learn system and it references a Mozilla tool bar which I do not have either. Don't know if this is relevant or not.

Hello,
Firefox on Windows is now following display scaling options which may render text larger on high resolution displays. There's more than one way to resolve this problem. See the [[Webpages are large and blurry after updating Firefox - how to fix ]] article for one suggestion. Here's another possible solution:
* Type '''about:config''' into the Firefox address bar and tap on the Enter key.
* If the warning '''This might void your warranty''' appears, click '''I'll be careful, I promise'''.
* Search for '''layout.css.devPixelsPerPx'''
[[Image:Fx22layout.css.devPixelsPerPx]]
* Double-click on layout.css.devPixelsPerPx to modify its value. The default is -1.0 in Firefox 22 and above. Change it to '''1.0''' to make it work like in previous Firefox versions.
If necessary, further adjust the value in 0.1 or 0.05 steps. Use values between 1.0 and about 0.5 to reduce elements in size. Use values greater than 1.0 to increase size. For example, a value of 1.25 will increase font size to 125% to accommodate the default DPI setting in Windows 8. '''Double check the value that you enter.''' Setting a too small value will make everything disappear and a too large value will blow things up.
If web pages still need to be adjusted then you can look at the [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level] or [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint] extension.
To adjust the font size for the user interface, you can use the [https://addons.mozilla.org/firefox/addon/theme-font-size-changer/ Theme Font & Size Changer] extension.
Did this fix your problems? Please report back to us!
Thank you.

DYNPRO_SEND_IN_BACKGROUND Dump due to Update Control Screen

Similar Messages

Maybe you are looking for