E-Commerce webshop Notification

Hi All,
    we have used one transaction type for e-commerce quotation and crm quotation. we have to notify the employee responsible whenever the quotation is created from Web shop by Contact Person. we have to restrict in such a way that notification will happen only quotation is created from web shop.
Any suggestions on this will be greatly appreciated.
Please let me know how to achieve this.

Hi Koti,
I am pretty much new in the CRM world, but stil want to share my idea for this requirement.
I believe, this can be achieved by having 2 dif transaction type created - 1 for E-Com and the 2nd for CRM. And then, here we want te notification action only to be gone to the Employee responsible, for that we can have an action created which will shoot a mail to the ER as soon as the Doc is saved.
If you don wanna create two trans, i gues action profile with a condition can help u achieve this, but nt so very sure as havent tried it anytime.
Pls lemme know if this is helpful
Suji

Similar Messages

  • E-commerce webshop timeout

    Hello,
    we are running CRM 5.0 with the e-commerce webshop scenario.
    whenever users are working on the e-commerce webshop - after about 20-
    30 minutes of idle time - the connection is lost and a new connection
    to the e-commerce webshop is required.
    i wanted to extend the timeout so i changed the following parameters to
    the following values -
    icm/server_port_0 = PROT=HTTP,PORT=8023,TIMEOUT=10800,PROCTIMEOUT=10800
    icm/keep_alive_timeout = 10800
    but the timeout remains the same - 20-30 minutes
    which parameters should be changed to extend the session timeout
    Regards,
    Moshe

    Try editing web.xml file <session-timeout> tag.  The timeout value is set in minutes

  • Contract determination in e-commerce webshop

    Hi all,
    We are using sales contracts, and customers can order products in the webshop against the contract. Multiple contracts can exist for one customer. If I create an ISBB order in the webUI, a pop-up is presented with the avialable contracts.
    However, in the e-commerce, the customer doesn't get the possiblity to choose, but the system determines the contract. The requirement is that also here, the system presents a list to the customer, so he can choose from which contract it should be ordered.
    How can I do this? Is there a customizing setting for this?
    We are running CRM 7.0.
    regards,
    Wim Olieman

    The requirement is that also here, the system presents a list to the customer, so...
    I assume you mentioned "list of the contracts"
    How can I do this? Is there a customizing setting for this?
    If you are asking about such a capability when entering the product in the basket, then there is no such feature provided by SAP.
    However, in the catalog, any product with multiple contracts, list the contracts in the catalog search results. You can pick the right conract item and add it to the basket.
    So, with some custom coding, it is indeed possible to develop this feature.
    Easwar Ram
    http://www.parxlns.com

  • System requirements e-commerce in ECC 6.0

    Can anybody give more info about system requirements for implementation of e-commerce webshop in ECC 6.0 (without CRM)?
    Many thanks in advance!

    Any business reason why you are using ISA 4.0 with ECC 6.0? Is this an upgrade project and do you have lot of custom ISA enhancements? If not, why not consider the higher version of E-Commerce.
    As per [SAP Note 1147879 - webshop 4.0 and mySAP ERP 2005|https://service.sap.com/sap/support/notes/1147879] you can not use ISA 4.0 with ERP 2005.. I am not sure if the same is true for ISA 4.0 with ECC 6.0.
    Please check the [Product Availability Matrix|https://service.sap.com/pam]
    Easwar Ram
    http://www.parxlns.com

  • URGENT-- SAP CRM 5.0 upgarde from SP 5 to SP 12

    Hi All,
           We have CRM 5.0 systems on SP 5.0. The operating system is HP-UX and database is Oracle 10g. We are planning to upgrade to SP 12. We have EP 7.0 as our front end. Mobile servers are also there ( MAR and communication stations). We also have B2B e commerce webshops running on JAVA stack.
    Please let us know the steps that need to be performed after the upgrade with respect to mobile scenario and basis activities.
    Thanks and Regards,
    Rajeet Mathur.

    It's a tedious manual process to re-implement all your customizations over to the Webclient.  I will say if you were good and kept business logic in BADI's then all you need to worry about is screen customizations.  If not and you were like many folks, you are going to have to recode everything.
    I did this about five years ago from CRM 4.0 to CRM 5.2(the first CRM release with webclient) and if you look at the content under my profile with way older blogs, you can find some of my commentary on doing this.
    For EHP3, you need to learn/love/embrace the AET.  You are also going to need to learn the SAP Web Client stuff ASAP.  The great part for you  is SAP offer classes or there is a book or two on it.  You don't have to learn it from lean documentation like I did.
    I disagree with the system reimplementation comment.  There is no need to throw out your CRM instance.  That's why we have upgrades.  Keep your system, but reimplement the code in the SAP Web Client Logic.  The great part is since you are coming from 5.0 -> EHP3 it's going to be like having a new CRM system again, as all the parts that need to be enhanced don't exist in your 5.0 box and that section of the upgrade system will look like a brand new system(at least that's how my 5.2 box looked like coming form 4.0).
    Take care,
    Stephen

  • CRM 5.0 system / client copy

    Hello,
    we are running  CRM 5.0 with e-commerce webshop scenario - abap+java system.
    the systems are configured in a 3 system landscape.
    the QA and prod system have the same client number.
    the customer asked to refresh the QA with PROD system.
    what is the recommended way to do it?
    do i need to do a complete production system copy - export the Prod system using sap tools from sapinst system copy and afterwards do the import into the QA system? - in this case are there any post processing things to be done regarding the NWDI which is configured on the development system and connected to all other landscape systems?also what about post proccessing of the XCS?
    the other methood is to do a client copy (just the abap) from the prod to the qa system - will it work?
    again - both QA and prod systems have the same client number - originally the QA system was installed using an import from the production (after prod system installation i exported it and imported to the QA system using R3LOAD and jload from the sapinst system copy tools)
    Regards,
    Moshe

    what is the recommended way to do it?
    QA refresh using PRO data is the recommended one if you have huge database
    Client copy is  not recommended one for huge database....
    You can find all the pre, post copy steps in standard system copy guide
    www.service.sap.com/systemcopy
    Regards
    Nick Loy

  • Connecting sap crm database from java | platform used NWDS

    I need to get some values from one of the SAP CRM 2007 database table and display it in one jsp file. I am working on a e commerce webshop in NWDS. I am new to NWDS. Can you give some sample code showing how to make connection to crm database and to do a select query on a table.

    I have only worked with CRM 3.0/4.0 but I have worked some with other WDP applications.
    So you want to access some data in a table in the CRM backend (R/3)?
    To do that from Java you need to call a BAPI in the CRM system. The BAPI does the acctuall lookup in the table and returns the value to the Java side. To do that in a WDP environment you need to set up Java Connectors (jCo) in your Java server. In some cases you can use a "normal" BAPI call, that is the way CRM ISA 3.0 and 4.0 works. See: http://help.sap.com/saphelp_crm30/helpdata/en/b6/97f8378f975450e10000009b38f8cf/frameset.htm
    and here:
    https://websmp108.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000633682005E
    Here is how to access ABAP functions from WDP: http://help.sap.com/saphelp_webas630/helpdata/en/c3/76b45d9688e04abe1a1070410ddc1e/frameset.htm

  • Catalog application on IOS

    Hi All,
    My customer has implemented an E-Commerce webshop solution which integrates to CRM (using TREX etc.).
    However, there is a recent requirement to view the webshop on an iPad.
    Most of the webshop works As Is but the pictures in the catalog application does not scrol beyond 2 pictures.
    We have tried resizing the pictures to no avail - it seems SAP has set in a standard width for each line item in the Catalog.
    Experts, can you please let me know any solutions available?
    We are quite flexible with what can be done e.g. set Products per view to be 2, resize pictures etc.

    Many apps need to be updated to run well on iOS 6. I get a notice about an available update almost any day.
    But I've not really noticed too many crashed since updating to iOS 6 so I suspect that you are experiencing some unusual behavior.
    First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the devise restart. See if that fixes your problem.

  • "Forgotten Password" functionality in E-Commerce 7.0 B2C webshop

    Hi gurus,
    Could anyone let me know if SAP has provided a standard Forgotten Password functionality in the E-Commerce version 7.0 B2C webshop solution ?
    Regards,
    Ashok.

    Hello Ashok,
    As far as i am aware this has remained the same since release 5.0
    regards
    Mark
    Edited by: Mark Foley on Oct 5, 2009 7:20 PM

  • Need PW Reset self service in Webshop (SAP E-COMMERCE 5.0)

    Our web shop users need to be able to reset the their web shop passwords online:
    Lost password steps:
    1. Request new password to be sent
    2. Temporary password is sent to email address on file
    3. User clicks on activation link, and is promoted to reset the temporary by entering temporary password and specifying new password.
    In the current process, the password is manually reset with transaction SU05 (Create and Maintain Internet Users). The tables / structure in use is BAPIUID with Component PASSWORD (Type: WWWPASS), RCODE, ACTION, USERID, USERTYPE
    Is anybody aware of any pre-existing functionality, code or components that can be leveraged?
    SAP ERP 6.0
    SAP Netweaver 7.0 WebAS
    SAP E-Commerce 5.0
    JSP on Eclipse Kepler
    Thanks!

    Hi Daniel,
    Please go through the below link and hope it will give you some idea.
    http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=250383181
    If you need any help from technical end then please let me know.
    Thanks,
    Hamendra

  • Not seeing credit card screen on Order screen in E-Commerce B2B webshop

    Hi Gurus,
         I am new to SAP E-Commerce 5.0 B2B application.  I am trying to see the credit card payment screen while ordering in Order page.  We are not using CRM system, but we are using ECC6.0 SD module.  Could you please guide me how to activate the credit card screen in Order page.  Thank you very much in advance.
    With Regards,
    Sudheer

    Hi Sudheer,
    For activating credit card page you have to configure it in your shop.
    Go to your "http://<host>:<port>/shopadmin/shopadmin/init.do
    Select your shop and go to "Transactions" tab go to bottom there are 2 options
    1) Payments -Check Box
        By Invoice possible
        By Cash on Delivery possible
        By Credit Card possible
    2)Preassignment: Payment  - Radio Button.
       By Invoice *
       By Cash On Delivery *
       By Credit Card *
    Select payment type you want to keep from options 1 you can select only 1 or you can select all three.
    From option 2 you can select only 1 as PReassignment payment.
    Restart the application Shop admin and ISA to make sure that when you access ISA after this change you will see Payment screen. In ISA 5.0 Once you click on Order or Quotation it will take you to the Payment scrren here you have to select "Invoice" or provide credit card information.
    If you have selected only invoice in Shopadmin then you will not see payment screen. From order page it will take you directly to order simulation page. but if you have payment option then you will see Payment Screen with credit card.
    Do not forgot to configure shop in shopadmin to get payment options screen in ISA. You will get it after order page not on the order page.
    If you want to display it on order page then you have to do customization to include payment infpormation or order page.
    I hope this will help you.
    Thanks and Regards.
    eCommerce Developer.

  • How to add Twitter link to webshop - E-Commerce

    Hi,
    I want to add Twitter, Facebook and link to another website to the webshop. How can I do this?
    Regards,
    Meenakshi

    Hi meenakshy,
    I think you need to give these links as hyper link in webshops.
    Please try the below html code in the pages wherever you want to show your links
    //<- a href="--giver your URL " >hyperlink color<  /a-> //
    Regards,
    Shanto Aloor
    Edited by: shanto aloor on Nov 15, 2010 11:14 AM
    Edited by: shanto aloor on Nov 15, 2010 11:14 AM
    Edited by: shanto aloor on Nov 15, 2010 11:14 AM

  • Need help to enable trace/logging for java debugging CRM 5.0 WebShop

    Dear experts,
    I'm new to sap, and i'm working on CRM 5.0 WebShop J2ee application with nwdi.
    I have to add a new functionnality, which has to call a custom FM in CRM. This FM has been tested and is OK.
    I have read the 2 files SAP_ISA50_DevAndExtGuide.pdf and ISA50_DevAndExtTuts_v1_0.pdf which have explain to me the process flow and organization of the framework.
    By helping me with the tutorials, I wrote all the files for my functionnality, from the jsp with the form, to the custom business backend with the call of the FM with parameters and JCo connection. (+ custom BOM, custom BO, BE interface, BE CRM implementation)
    Everything builds without error, and I deploy the application on my test env.
    Then I go to my webapp, I call the custom jsp with form, I put values, then I validate the form, but my FM is not called, and I don't know where is the problem, because I can't see a trace of the process flow, to know where is the error.
    By searching in this forum I found 2 notes that explain how to activate debug trace for all the application, one note for systems before SP11 and another for systems with SP11 and higher. But I don't know how to see the patchlevel of the system (I went to system information of the j2ee server and the on ly thing I can notice is below the server0 properties : Kernel Version:  7.00 PatchLevel.
    In these notes I read about Visual Administrator : I found this directly on the server with remote desktop, but the progress bar at the bottom of the window don't arrives to 100% and I can't see the properties and values of the parameters for the Log.
    I went to XCM too, and set appinfo and logfiledownload to true, then went to Logging into e-commerce administration console : in the Log configuration tab, I can create new configurations but the effective severity automatically sets to error, even if I set All or Debug manually ; in the session log tab, i tried to launch the application, then start log, then validate my form, then stop log, but I can't find anything about the trace of the process flow in the generated file.
    Please help, I have to finish this for end of week and I'm alone ...
    PS I'm french, and don't speak very well English please excuse me.
    Thank you very much.
    J. Lag.

    Hi
    For logs follow this note no[Creation of logs for B2B and B2C Release 5.0|https://service.sap.com/sap/support/notes/1090753]
    Follow this code for calling custom Function Module
    1) ZBOM.java
    public class ZBOM extends DefaultBusinessObjectManager implements BOManager, BackendAware {
    public static final String ZCUSTOM_BOM = "ZCUSTOM-BOM";
    private ZFunction func;
    public ZBOM() { }
    public ZFunction getFUNC() {
      if (func== null) {
       func= new ZFunction();
       assignBackendObjectManager(func);  }
      return func; }
    public void release() { }
    2) ZFUNCTION.java
    public class ZFunction extends BOBase implements BackendAware {
    private ZInterface backendInterface;
    private BackendObjectManager bem;
    private ZInterface getInterface() {
      if (backendInterface == null) {
       try {
        backendInterface = (ZInterface) bem.createBackendBusinessObject("ZCustomBO");
       } catch (BackendException e) {
      return backendInterface;
    public void setBackendObjectManager(BackendObjectManager bem) {
      this.bem = bem;
    public String getCustomFunc(String value) {
      try {
       return getInterface().getIncotermListvalue) ;
      } catch (RuntimeException e) { return ""; }
    3)ZINTERFACE.java
    public interface ZInterface extends BackendBusinessObject {
         public  String getCustomFunc(String value);
    4) ZBACKEND.java
    public class ZBackend extends BackendBusinessObjectBaseSAP implements ZInterface {
         String exportvalue="";
         public String getCustomFunc(String value) {
              try {
                   Function func =getDefaultJCoConnection().getJCoFunction("Z_CUSTOM_FUNCTION_MODULE");
                   func.getImportParameterList().getField("IMPORTPARAMETER").setValue(value);
                   getDefaultJCoConnection().execute(func);
                   exportvalue = func.getExportParameterList().getString("IMPORTPARAMETER");
              } catch (Exception e) {
                   return exportvalue ;
    5) WEB_INF/xcm/customer/modification/bom-config.xml
    <BusinessObjectManager name="ZCUSTOM-BOM" className="com.sap.isa.custom.ZBOM"/>
    6) WEB_INF/xcm/customer/modification/bom-config.xml
    <config isa:extends="../config[@id='crmdefault']">          
       <businessObject type="ZCustomBO"
                    name="ZCustomBO"
                    className="com.sap.isa.custom.ZBackend"
                    connectionFactoryName="JCO"
                    defaultConnectionName="ISAStateless"/>           
    </config>
    Regards,
    [Sateesh Chandra|http://sateeshchandrach.googlepages.com/isa]

  • Notifications on Web Apps

    Does anyone know if notifications (sms and or email) can be used on web apps?
    Does it have to be a web-commerce site or can it be a trial site?

    Michael Shannon (guest) wrote:
    : Does anyone know how to remove the Oracle logo that now appears
    : when using the Oracle look-and-feel parameter in the startup
    : html file?
    : I would like to use the new reports, but that would mean that I
    : would have to redesign all my screens due to the 1/2 inch that
    : the Oracle logo uses.
    : I am aware that this does not happen when the Oracle look-and-
    : feel parameter is not used but I would rather not have to
    : sacrifice the nice appearance to eliminate an unwanted logo.
    : Thanks to Oracle for allowing us resize the app screen and now
    : change the title as well. But why are you forcing us to work
    : around your logo?
    This sounds like more of a question for the Oracle Applications
    group. We do provide some sample HTML files for launching reports
    in the ORACLE_HOME/REPORT60 directory. You could try modifying
    one of those to suit your needs. Once you have the syntax of the
    URL, it's relatively easy to build an HTML page that calls the
    reports.
    Regards
    The Oracle Reports Team
    null

  • Is it posible to use TREX 7.1 with E-Commerce 5.0?

    Hi All,
    E-commerce 5.0 installation guides specifies using TREX 7.0. But We are facing issues, installing TREX 7.0 on Windows 64 bit platform as TREX 7.0 does not support Windows 64 bit platform.
    Please can someone advice if we can use TREX 7.1 with E-Commerce 5.0
    Scenerio is  E-Commerce ERP edition. with backend R/3 4.6c.
    Regards,
    Dipender Singh

    Hello Martin,
    The E-commerce 5.0 guide for ERP, says that the minimum version supported is 4.6C with the specific patch level version. We had issues initially with the TREX 7.0 installation on 64 bit windows ( lot of modifications have to be done manually here).
    But now TREX 7.0 is working fine and i can see the replication happeing from R/3 4.6C. We are configuring the webshops and doing all the XCM settings currently so, would be able to tell in a days time, if  it works for us or not.(with 4.6C).
    Thanks,
    Dipender Singh

Maybe you are looking for